ºÝºÝߣshows by User: NiteshPandit / http://www.slideshare.net/images/logo.gif ºÝºÝߣshows by User: NiteshPandit / Thu, 05 Jul 2012 15:08:02 GMT ºÝºÝߣShare feed for ºÝºÝߣshows by User: NiteshPandit I Pdc V1.3.0 A Complete Technical Report Including I Pdc, Pmu Simulator, And Db Server /slideshow/i-pdc-v130-a-complete-technical-report-including-i-pdc-pmu-simulator-and-db-server/13555548 ipdcv130acompletetechnicalreportincludingipdcpmusimulatoranddbserver-13415186376931-phpapp02-120705150814-phpapp02
iPDC is a free Phasor Data Concentrator that collects data from PMUs, and PDC/iPDC that are IEEEC37.118 Synchrophasors std compliant. iPDC do the time alignment and combining of the received data into frames as per IEEEC37.118 and can send to other iPDCs, and applications. iPDC can also archive received data in the MySQL database on local/remote machine. PMU Simulator is also IEEEC37.118 std compliant. Software is built to be working on Linux platform. iPDC is a free Phasor Data Concentrator based on IEEEC37.118 synchrophasor standard. It also has Database Server for iPDC and PMU Simulator modules. The objective of iPDC project is to create a IEEE C37.118 Synchrophasor standardized Phasor Data Concentrator and PMU Simulator, on which research students and others can develop and test their algorithms and applications. The purpose of iPDC released as a Free Software to its availability for users without any restriction regarding its usage and modification. And to get the contribution from users and developers all around the world.]]>

iPDC is a free Phasor Data Concentrator that collects data from PMUs, and PDC/iPDC that are IEEEC37.118 Synchrophasors std compliant. iPDC do the time alignment and combining of the received data into frames as per IEEEC37.118 and can send to other iPDCs, and applications. iPDC can also archive received data in the MySQL database on local/remote machine. PMU Simulator is also IEEEC37.118 std compliant. Software is built to be working on Linux platform. iPDC is a free Phasor Data Concentrator based on IEEEC37.118 synchrophasor standard. It also has Database Server for iPDC and PMU Simulator modules. The objective of iPDC project is to create a IEEE C37.118 Synchrophasor standardized Phasor Data Concentrator and PMU Simulator, on which research students and others can develop and test their algorithms and applications. The purpose of iPDC released as a Free Software to its availability for users without any restriction regarding its usage and modification. And to get the contribution from users and developers all around the world.]]>
Thu, 05 Jul 2012 15:08:02 GMT /slideshow/i-pdc-v130-a-complete-technical-report-including-i-pdc-pmu-simulator-and-db-server/13555548 NiteshPandit@slideshare.net(NiteshPandit) I Pdc V1.3.0 A Complete Technical Report Including I Pdc, Pmu Simulator, And Db Server NiteshPandit iPDC is a free Phasor Data Concentrator that collects data from PMUs, and PDC/iPDC that are IEEEC37.118 Synchrophasors std compliant. iPDC do the time alignment and combining of the received data into frames as per IEEEC37.118 and can send to other iPDCs, and applications. iPDC can also archive received data in the MySQL database on local/remote machine. PMU Simulator is also IEEEC37.118 std compliant. Software is built to be working on Linux platform. iPDC is a free Phasor Data Concentrator based on IEEEC37.118 synchrophasor standard. It also has Database Server for iPDC and PMU Simulator modules. The objective of iPDC project is to create a IEEE C37.118 Synchrophasor standardized Phasor Data Concentrator and PMU Simulator, on which research students and others can develop and test their algorithms and applications. The purpose of iPDC released as a Free Software to its availability for users without any restriction regarding its usage and modification. And to get the contribution from users and developers all around the world. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/ipdcv130acompletetechnicalreportincludingipdcpmusimulatoranddbserver-13415186376931-phpapp02-120705150814-phpapp02-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> iPDC is a free Phasor Data Concentrator that collects data from PMUs, and PDC/iPDC that are IEEEC37.118 Synchrophasors std compliant. iPDC do the time alignment and combining of the received data into frames as per IEEEC37.118 and can send to other iPDCs, and applications. iPDC can also archive received data in the MySQL database on local/remote machine. PMU Simulator is also IEEEC37.118 std compliant. Software is built to be working on Linux platform. iPDC is a free Phasor Data Concentrator based on IEEEC37.118 synchrophasor standard. It also has Database Server for iPDC and PMU Simulator modules. The objective of iPDC project is to create a IEEE C37.118 Synchrophasor standardized Phasor Data Concentrator and PMU Simulator, on which research students and others can develop and test their algorithms and applications. The purpose of iPDC released as a Free Software to its availability for users without any restriction regarding its usage and modification. And to get the contribution from users and developers all around the world.
I Pdc V1.3.0 A Complete Technical Report Including I Pdc, Pmu Simulator, And Db Server from Nitesh Pandit
]]>
1094 2 https://cdn.slidesharecdn.com/ss_thumbnails/ipdcv130acompletetechnicalreportincludingipdcpmusimulatoranddbserver-13415186376931-phpapp02-120705150814-phpapp02-thumbnail.jpg?width=120&height=120&fit=bounds document Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0
iPDC-v1.3.0 - A Complete Technical Report including iPDC, PMU Simulator, and DBserver /NiteshPandit/i-pdc-v130-a-complete-technical-report-including-ipdc-pmusimulator-and-dbserver ipdc-v1-3-0-acompletetechnicalreportincludingipdcpmusimulatoranddbserver-120705145325-phpapp02
iPDC is a free Phasor Data Concentrator based on IEEEC37.118 synchrophasor standard. It also has Database Server for iPDC and PMU Simulator modules. The objective of iPDC project is to create a IEEE C37.118 Synchrophasor standardized Phasor Data Concentrator and PMU Simulator, on which research students and others can develop and test their algorithms and applications. The purpose of iPDC released as a Free Software to its availability for users without any restriction regarding its usage and modification. And to get the contribution from users and developers all around the world. iPDC do the time alignment and combining of the received data into frames as per IEEEC37.118 and can send to other iPDCs, and applications. iPDC can also archive received data in the MySQL database on local/remote machine. PMU Simulator is also IEEEC37.118 std compliant. Software is built to be working on Linux platform.]]>

iPDC is a free Phasor Data Concentrator based on IEEEC37.118 synchrophasor standard. It also has Database Server for iPDC and PMU Simulator modules. The objective of iPDC project is to create a IEEE C37.118 Synchrophasor standardized Phasor Data Concentrator and PMU Simulator, on which research students and others can develop and test their algorithms and applications. The purpose of iPDC released as a Free Software to its availability for users without any restriction regarding its usage and modification. And to get the contribution from users and developers all around the world. iPDC do the time alignment and combining of the received data into frames as per IEEEC37.118 and can send to other iPDCs, and applications. iPDC can also archive received data in the MySQL database on local/remote machine. PMU Simulator is also IEEEC37.118 std compliant. Software is built to be working on Linux platform.]]>
Thu, 05 Jul 2012 14:53:24 GMT /NiteshPandit/i-pdc-v130-a-complete-technical-report-including-ipdc-pmusimulator-and-dbserver NiteshPandit@slideshare.net(NiteshPandit) iPDC-v1.3.0 - A Complete Technical Report including iPDC, PMU Simulator, and DBserver NiteshPandit iPDC is a free Phasor Data Concentrator based on IEEEC37.118 synchrophasor standard. It also has Database Server for iPDC and PMU Simulator modules. The objective of iPDC project is to create a IEEE C37.118 Synchrophasor standardized Phasor Data Concentrator and PMU Simulator, on which research students and others can develop and test their algorithms and applications. The purpose of iPDC released as a Free Software to its availability for users without any restriction regarding its usage and modification. And to get the contribution from users and developers all around the world. iPDC do the time alignment and combining of the received data into frames as per IEEEC37.118 and can send to other iPDCs, and applications. iPDC can also archive received data in the MySQL database on local/remote machine. PMU Simulator is also IEEEC37.118 std compliant. Software is built to be working on Linux platform. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/ipdc-v1-3-0-acompletetechnicalreportincludingipdcpmusimulatoranddbserver-120705145325-phpapp02-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> iPDC is a free Phasor Data Concentrator based on IEEEC37.118 synchrophasor standard. It also has Database Server for iPDC and PMU Simulator modules. The objective of iPDC project is to create a IEEE C37.118 Synchrophasor standardized Phasor Data Concentrator and PMU Simulator, on which research students and others can develop and test their algorithms and applications. The purpose of iPDC released as a Free Software to its availability for users without any restriction regarding its usage and modification. And to get the contribution from users and developers all around the world. iPDC do the time alignment and combining of the received data into frames as per IEEEC37.118 and can send to other iPDCs, and applications. iPDC can also archive received data in the MySQL database on local/remote machine. PMU Simulator is also IEEEC37.118 std compliant. Software is built to be working on Linux platform.
iPDC-v1.3.0 - A Complete Technical Report including iPDC, PMU Simulator, and DBserver from Nitesh Pandit
]]>
1314 4 https://cdn.slidesharecdn.com/ss_thumbnails/ipdc-v1-3-0-acompletetechnicalreportincludingipdcpmusimulatoranddbserver-120705145325-phpapp02-thumbnail.jpg?width=120&height=120&fit=bounds document White http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0
iPDC Report Nitesh /slideshow/ipdc-report-nitesh/9970748 ipdcreportnitesh-111101011201-phpapp02
The use of synchrophasors for monitoring and improving the stability of power transmission networks is gaining in significance all over the world. The aim is to monitor the system state, to intensify awareness for system stability and to make optimal use of existing lines. This way, system stability can be improved overall and even the transmission performance can be increased. The data from so many PMU’s and PDC’s needs to be collected and directed to proper channels for its efficient use. Thus we need to develop an efficient, flexible and hybrid data concentrator that can serve this purpose. Besides accepting the data from PMU’s, PDC should be able to accept the data also from other PDC. We have designed such a PDC (iPDC) that accepts data from PMU & PDC that are IEEEC37.118 standard compliant. WAMS architecture with iPDC and PMU at different levels. This architecture enables iPDC to receive data either from a PMU or other iPDC. Both PMU and iPDC from whom the data is being received should be IEEE C37.118 synchrophasor standard compliant. It is hybrid architecture. iPDC Design The client server architecture is common in networks when two peers are communicating with each other. Of the two peers (PMU and iPDC) that are communicating with each other in WAMS one acts as a client and the other as a server. Since PMU saves the requests coming from iPDC by sending data or configuration frames it acts as a server. It listens for command frames from iPDC. PMU-iPDC communication can be either over TCP or UDP communication protocols. On receiving command frames, PMU replies to the iPDC with data or configuration frames according to the type of request. iPDC functionality is bifurcated as server and client. iPDC as a Client - When iPDC receives data or configuration frames its acts as a client. When acting as a client, it creates a new thread for each PMU or a PDC from whom it is going to receive data/configuration frames. This thread would establish connection between the two communication entities. It handles both TCP and UDP connections. The first frame that the server (PMU/PDC) would receive is the command for sending the configuration frame. When the server replies with the configuration frame, iPDC (client) would generate another request to start sending the data frames. On receiving such a command frame, the server starts sending the data frames. If there is some change in the status bits of data frame which the client (iPDC) notices, it would take an action. For example if it notices a bit 10 has been set, it would internally send a command to server to send the latest configuration frame. iPDC as a Server- When iPDC receives command frames from another PDC it would acts as a server. There would be two reserved ports one for UDP and other for TCP on which the PDC would receive command frame requests. Thus PDC now plays the role of PMU waiting for command frames.]]>

The use of synchrophasors for monitoring and improving the stability of power transmission networks is gaining in significance all over the world. The aim is to monitor the system state, to intensify awareness for system stability and to make optimal use of existing lines. This way, system stability can be improved overall and even the transmission performance can be increased. The data from so many PMU’s and PDC’s needs to be collected and directed to proper channels for its efficient use. Thus we need to develop an efficient, flexible and hybrid data concentrator that can serve this purpose. Besides accepting the data from PMU’s, PDC should be able to accept the data also from other PDC. We have designed such a PDC (iPDC) that accepts data from PMU & PDC that are IEEEC37.118 standard compliant. WAMS architecture with iPDC and PMU at different levels. This architecture enables iPDC to receive data either from a PMU or other iPDC. Both PMU and iPDC from whom the data is being received should be IEEE C37.118 synchrophasor standard compliant. It is hybrid architecture. iPDC Design The client server architecture is common in networks when two peers are communicating with each other. Of the two peers (PMU and iPDC) that are communicating with each other in WAMS one acts as a client and the other as a server. Since PMU saves the requests coming from iPDC by sending data or configuration frames it acts as a server. It listens for command frames from iPDC. PMU-iPDC communication can be either over TCP or UDP communication protocols. On receiving command frames, PMU replies to the iPDC with data or configuration frames according to the type of request. iPDC functionality is bifurcated as server and client. iPDC as a Client - When iPDC receives data or configuration frames its acts as a client. When acting as a client, it creates a new thread for each PMU or a PDC from whom it is going to receive data/configuration frames. This thread would establish connection between the two communication entities. It handles both TCP and UDP connections. The first frame that the server (PMU/PDC) would receive is the command for sending the configuration frame. When the server replies with the configuration frame, iPDC (client) would generate another request to start sending the data frames. On receiving such a command frame, the server starts sending the data frames. If there is some change in the status bits of data frame which the client (iPDC) notices, it would take an action. For example if it notices a bit 10 has been set, it would internally send a command to server to send the latest configuration frame. iPDC as a Server- When iPDC receives command frames from another PDC it would acts as a server. There would be two reserved ports one for UDP and other for TCP on which the PDC would receive command frame requests. Thus PDC now plays the role of PMU waiting for command frames.]]>
Tue, 01 Nov 2011 01:12:01 GMT /slideshow/ipdc-report-nitesh/9970748 NiteshPandit@slideshare.net(NiteshPandit) iPDC Report Nitesh NiteshPandit The use of synchrophasors for monitoring and improving the stability of power transmission networks is gaining in significance all over the world. The aim is to monitor the system state, to intensify awareness for system stability and to make optimal use of existing lines. This way, system stability can be improved overall and even the transmission performance can be increased. The data from so many PMU’s and PDC’s needs to be collected and directed to proper channels for its efficient use. Thus we need to develop an efficient, flexible and hybrid data concentrator that can serve this purpose. Besides accepting the data from PMU’s, PDC should be able to accept the data also from other PDC. We have designed such a PDC (iPDC) that accepts data from PMU & PDC that are IEEEC37.118 standard compliant. WAMS architecture with iPDC and PMU at different levels. This architecture enables iPDC to receive data either from a PMU or other iPDC. Both PMU and iPDC from whom the data is being received should be IEEE C37.118 synchrophasor standard compliant. It is hybrid architecture. iPDC Design The client server architecture is common in networks when two peers are communicating with each other. Of the two peers (PMU and iPDC) that are communicating with each other in WAMS one acts as a client and the other as a server. Since PMU saves the requests coming from iPDC by sending data or configuration frames it acts as a server. It listens for command frames from iPDC. PMU-iPDC communication can be either over TCP or UDP communication protocols. On receiving command frames, PMU replies to the iPDC with data or configuration frames according to the type of request. iPDC functionality is bifurcated as server and client. iPDC as a Client - When iPDC receives data or configuration frames its acts as a client. When acting as a client, it creates a new thread for each PMU or a PDC from whom it is going to receive data/configuration frames. This thread would establish connection between the two communication entities. It handles both TCP and UDP connections. The first frame that the server (PMU/PDC) would receive is the command for sending the configuration frame. When the server replies with the configuration frame, iPDC (client) would generate another request to start sending the data frames. On receiving such a command frame, the server starts sending the data frames. If there is some change in the status bits of data frame which the client (iPDC) notices, it would take an action. For example if it notices a bit 10 has been set, it would internally send a command to server to send the latest configuration frame. iPDC as a Server- When iPDC receives command frames from another PDC it would acts as a server. There would be two reserved ports one for UDP and other for TCP on which the PDC would receive command frame requests. Thus PDC now plays the role of PMU waiting for command frames. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/ipdcreportnitesh-111101011201-phpapp02-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> The use of synchrophasors for monitoring and improving the stability of power transmission networks is gaining in significance all over the world. The aim is to monitor the system state, to intensify awareness for system stability and to make optimal use of existing lines. This way, system stability can be improved overall and even the transmission performance can be increased. The data from so many PMU’s and PDC’s needs to be collected and directed to proper channels for its efficient use. Thus we need to develop an efficient, flexible and hybrid data concentrator that can serve this purpose. Besides accepting the data from PMU’s, PDC should be able to accept the data also from other PDC. We have designed such a PDC (iPDC) that accepts data from PMU &amp; PDC that are IEEEC37.118 standard compliant. WAMS architecture with iPDC and PMU at different levels. This architecture enables iPDC to receive data either from a PMU or other iPDC. Both PMU and iPDC from whom the data is being received should be IEEE C37.118 synchrophasor standard compliant. It is hybrid architecture. iPDC Design The client server architecture is common in networks when two peers are communicating with each other. Of the two peers (PMU and iPDC) that are communicating with each other in WAMS one acts as a client and the other as a server. Since PMU saves the requests coming from iPDC by sending data or configuration frames it acts as a server. It listens for command frames from iPDC. PMU-iPDC communication can be either over TCP or UDP communication protocols. On receiving command frames, PMU replies to the iPDC with data or configuration frames according to the type of request. iPDC functionality is bifurcated as server and client. iPDC as a Client - When iPDC receives data or configuration frames its acts as a client. When acting as a client, it creates a new thread for each PMU or a PDC from whom it is going to receive data/configuration frames. This thread would establish connection between the two communication entities. It handles both TCP and UDP connections. The first frame that the server (PMU/PDC) would receive is the command for sending the configuration frame. When the server replies with the configuration frame, iPDC (client) would generate another request to start sending the data frames. On receiving such a command frame, the server starts sending the data frames. If there is some change in the status bits of data frame which the client (iPDC) notices, it would take an action. For example if it notices a bit 10 has been set, it would internally send a command to server to send the latest configuration frame. iPDC as a Server- When iPDC receives command frames from another PDC it would acts as a server. There would be two reserved ports one for UDP and other for TCP on which the PDC would receive command frame requests. Thus PDC now plays the role of PMU waiting for command frames.
iPDC Report Nitesh from Nitesh Pandit
]]>
957 2 https://cdn.slidesharecdn.com/ss_thumbnails/ipdcreportnitesh-111101011201-phpapp02-thumbnail.jpg?width=120&height=120&fit=bounds document Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0
iPDC Report Kedar /slideshow/i-pdc-report-kedar/9970730 ipdcreportkedar-111101010927-phpapp01
The use of synchrophasors for monitoring and improving the stability of power transmission networks is gaining in significance all over the world. The aim is to monitor the system state, to intensify awareness for system stability and to make optimal use of existing lines. This way, system stability can be improved overall and even the transmission performance can be increased. The data from so many PMU’s and PDC’s needs to be collected and directed to proper channels for its efficient use. Thus we need to develop an efficient, flexible and hybrid data concentrator that can serve this purpose. Besides accepting the data from PMU’s, PDC should be able to accept the data also from other PDC. We have designed such a PDC (iPDC) that accepts data from PMU & PDC that are IEEEC37.118 standard compliant. WAMS architecture with iPDC and PMU at different levels. This architecture enables iPDC to receive data either from a PMU or other iPDC. Both PMU and iPDC from whom the data is being received should be IEEE C37.118 synchrophasor standard compliant. It is hybrid architecture. iPDC Design The client server architecture is common in networks when two peers are communicating with each other. Of the two peers (PMU and iPDC) that are communicating with each other in WAMS one acts as a client and the other as a server. Since PMU saves the requests coming from iPDC by sending data or configuration frames it acts as a server. It listens for command frames from iPDC. PMU-iPDC communication can be either over TCP or UDP communication protocols. On receiving command frames, PMU replies to the iPDC with data or configuration frames according to the type of request. iPDC functionality is bifurcated as server and client. iPDC as a Client - When iPDC receives data or configuration frames its acts as a client. When acting as a client, it creates a new thread for each PMU or a PDC from whom it is going to receive data/configuration frames. This thread would establish connection between the two communication entities. It handles both TCP and UDP connections. The first frame that the server (PMU/PDC) would receive is the command for sending the configuration frame. When the server replies with the configuration frame, iPDC (client) would generate another request to start sending the data frames. On receiving such a command frame, the server starts sending the data frames. If there is some change in the status bits of data frame which the client (iPDC) notices, it would take an action. For example if it notices a bit 10 has been set, it would internally send a command to server to send the latest configuration frame. iPDC as a Server- When iPDC receives command frames from another PDC it would acts as a server. There would be two reserved ports one for UDP and other for TCP on which the PDC would receive command frame requests. Thus PDC now plays the role of PMU waiting for command frames.]]>

The use of synchrophasors for monitoring and improving the stability of power transmission networks is gaining in significance all over the world. The aim is to monitor the system state, to intensify awareness for system stability and to make optimal use of existing lines. This way, system stability can be improved overall and even the transmission performance can be increased. The data from so many PMU’s and PDC’s needs to be collected and directed to proper channels for its efficient use. Thus we need to develop an efficient, flexible and hybrid data concentrator that can serve this purpose. Besides accepting the data from PMU’s, PDC should be able to accept the data also from other PDC. We have designed such a PDC (iPDC) that accepts data from PMU & PDC that are IEEEC37.118 standard compliant. WAMS architecture with iPDC and PMU at different levels. This architecture enables iPDC to receive data either from a PMU or other iPDC. Both PMU and iPDC from whom the data is being received should be IEEE C37.118 synchrophasor standard compliant. It is hybrid architecture. iPDC Design The client server architecture is common in networks when two peers are communicating with each other. Of the two peers (PMU and iPDC) that are communicating with each other in WAMS one acts as a client and the other as a server. Since PMU saves the requests coming from iPDC by sending data or configuration frames it acts as a server. It listens for command frames from iPDC. PMU-iPDC communication can be either over TCP or UDP communication protocols. On receiving command frames, PMU replies to the iPDC with data or configuration frames according to the type of request. iPDC functionality is bifurcated as server and client. iPDC as a Client - When iPDC receives data or configuration frames its acts as a client. When acting as a client, it creates a new thread for each PMU or a PDC from whom it is going to receive data/configuration frames. This thread would establish connection between the two communication entities. It handles both TCP and UDP connections. The first frame that the server (PMU/PDC) would receive is the command for sending the configuration frame. When the server replies with the configuration frame, iPDC (client) would generate another request to start sending the data frames. On receiving such a command frame, the server starts sending the data frames. If there is some change in the status bits of data frame which the client (iPDC) notices, it would take an action. For example if it notices a bit 10 has been set, it would internally send a command to server to send the latest configuration frame. iPDC as a Server- When iPDC receives command frames from another PDC it would acts as a server. There would be two reserved ports one for UDP and other for TCP on which the PDC would receive command frame requests. Thus PDC now plays the role of PMU waiting for command frames.]]>
Tue, 01 Nov 2011 01:09:25 GMT /slideshow/i-pdc-report-kedar/9970730 NiteshPandit@slideshare.net(NiteshPandit) iPDC Report Kedar NiteshPandit The use of synchrophasors for monitoring and improving the stability of power transmission networks is gaining in significance all over the world. The aim is to monitor the system state, to intensify awareness for system stability and to make optimal use of existing lines. This way, system stability can be improved overall and even the transmission performance can be increased. The data from so many PMU’s and PDC’s needs to be collected and directed to proper channels for its efficient use. Thus we need to develop an efficient, flexible and hybrid data concentrator that can serve this purpose. Besides accepting the data from PMU’s, PDC should be able to accept the data also from other PDC. We have designed such a PDC (iPDC) that accepts data from PMU & PDC that are IEEEC37.118 standard compliant. WAMS architecture with iPDC and PMU at different levels. This architecture enables iPDC to receive data either from a PMU or other iPDC. Both PMU and iPDC from whom the data is being received should be IEEE C37.118 synchrophasor standard compliant. It is hybrid architecture. iPDC Design The client server architecture is common in networks when two peers are communicating with each other. Of the two peers (PMU and iPDC) that are communicating with each other in WAMS one acts as a client and the other as a server. Since PMU saves the requests coming from iPDC by sending data or configuration frames it acts as a server. It listens for command frames from iPDC. PMU-iPDC communication can be either over TCP or UDP communication protocols. On receiving command frames, PMU replies to the iPDC with data or configuration frames according to the type of request. iPDC functionality is bifurcated as server and client. iPDC as a Client - When iPDC receives data or configuration frames its acts as a client. When acting as a client, it creates a new thread for each PMU or a PDC from whom it is going to receive data/configuration frames. This thread would establish connection between the two communication entities. It handles both TCP and UDP connections. The first frame that the server (PMU/PDC) would receive is the command for sending the configuration frame. When the server replies with the configuration frame, iPDC (client) would generate another request to start sending the data frames. On receiving such a command frame, the server starts sending the data frames. If there is some change in the status bits of data frame which the client (iPDC) notices, it would take an action. For example if it notices a bit 10 has been set, it would internally send a command to server to send the latest configuration frame. iPDC as a Server- When iPDC receives command frames from another PDC it would acts as a server. There would be two reserved ports one for UDP and other for TCP on which the PDC would receive command frame requests. Thus PDC now plays the role of PMU waiting for command frames. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/ipdcreportkedar-111101010927-phpapp01-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> The use of synchrophasors for monitoring and improving the stability of power transmission networks is gaining in significance all over the world. The aim is to monitor the system state, to intensify awareness for system stability and to make optimal use of existing lines. This way, system stability can be improved overall and even the transmission performance can be increased. The data from so many PMU’s and PDC’s needs to be collected and directed to proper channels for its efficient use. Thus we need to develop an efficient, flexible and hybrid data concentrator that can serve this purpose. Besides accepting the data from PMU’s, PDC should be able to accept the data also from other PDC. We have designed such a PDC (iPDC) that accepts data from PMU &amp; PDC that are IEEEC37.118 standard compliant. WAMS architecture with iPDC and PMU at different levels. This architecture enables iPDC to receive data either from a PMU or other iPDC. Both PMU and iPDC from whom the data is being received should be IEEE C37.118 synchrophasor standard compliant. It is hybrid architecture. iPDC Design The client server architecture is common in networks when two peers are communicating with each other. Of the two peers (PMU and iPDC) that are communicating with each other in WAMS one acts as a client and the other as a server. Since PMU saves the requests coming from iPDC by sending data or configuration frames it acts as a server. It listens for command frames from iPDC. PMU-iPDC communication can be either over TCP or UDP communication protocols. On receiving command frames, PMU replies to the iPDC with data or configuration frames according to the type of request. iPDC functionality is bifurcated as server and client. iPDC as a Client - When iPDC receives data or configuration frames its acts as a client. When acting as a client, it creates a new thread for each PMU or a PDC from whom it is going to receive data/configuration frames. This thread would establish connection between the two communication entities. It handles both TCP and UDP connections. The first frame that the server (PMU/PDC) would receive is the command for sending the configuration frame. When the server replies with the configuration frame, iPDC (client) would generate another request to start sending the data frames. On receiving such a command frame, the server starts sending the data frames. If there is some change in the status bits of data frame which the client (iPDC) notices, it would take an action. For example if it notices a bit 10 has been set, it would internally send a command to server to send the latest configuration frame. iPDC as a Server- When iPDC receives command frames from another PDC it would acts as a server. There would be two reserved ports one for UDP and other for TCP on which the PDC would receive command frame requests. Thus PDC now plays the role of PMU waiting for command frames.
iPDC Report Kedar from Nitesh Pandit
]]>
570 1 https://cdn.slidesharecdn.com/ss_thumbnails/ipdcreportkedar-111101010927-phpapp01-thumbnail.jpg?width=120&height=120&fit=bounds document White http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0
Storage, retreival and process of continuous streaming data in a widearea frequency measurement system /slideshow/storage-retreival-and-process-of-continuous-streaming-data-in-a-widearea-frequency-measurement-system/9970706 storageretreivalandprocessofcontinuousstreamingdatainawideareafrequencymeasurementsystem-111101010624-phpapp02
Storage, retreival and process of continuous streaming data in a Wide Area Frequency Measurement System and further analysis to generate the flags and alerts. Power System Network is continuously subjected to disturbances in the form of sudden load and generation changes. These disturbances give rise to oscillations in the rotor angle which are also seen in the frequency. To study these oscillations wide area frequency measurement setup is implemented in this project. The setup are strategically placed in five different places in India and are time synchronized via Network Time Protocol (NTP). The frequency is measured every 20 ms and is time stamped and send through internet to a server in IITB. The server program which is continuously receiving the packets, checking the correctness of packet information, doing the insertion in database according their time and displaying it on the web. In ‘Wide area frequency measurement system’ frequencies measured at different places in India are sent to a IITB Server. Frequencies are measured by sensors at every 20 ms. Local frequency measured is stamped with the time and place and sent to IITB Server. The IITB server is continuously listening for the packets on UDP port 6000. When a packet is received, it extracts the data and writes it in a file. A separate file is created for each sensor and when any file reaches its maximum a new file is created for each sensor with incremented serial number. Plotting of this data is done offline.]]>

Storage, retreival and process of continuous streaming data in a Wide Area Frequency Measurement System and further analysis to generate the flags and alerts. Power System Network is continuously subjected to disturbances in the form of sudden load and generation changes. These disturbances give rise to oscillations in the rotor angle which are also seen in the frequency. To study these oscillations wide area frequency measurement setup is implemented in this project. The setup are strategically placed in five different places in India and are time synchronized via Network Time Protocol (NTP). The frequency is measured every 20 ms and is time stamped and send through internet to a server in IITB. The server program which is continuously receiving the packets, checking the correctness of packet information, doing the insertion in database according their time and displaying it on the web. In ‘Wide area frequency measurement system’ frequencies measured at different places in India are sent to a IITB Server. Frequencies are measured by sensors at every 20 ms. Local frequency measured is stamped with the time and place and sent to IITB Server. The IITB server is continuously listening for the packets on UDP port 6000. When a packet is received, it extracts the data and writes it in a file. A separate file is created for each sensor and when any file reaches its maximum a new file is created for each sensor with incremented serial number. Plotting of this data is done offline.]]>
Tue, 01 Nov 2011 01:06:21 GMT /slideshow/storage-retreival-and-process-of-continuous-streaming-data-in-a-widearea-frequency-measurement-system/9970706 NiteshPandit@slideshare.net(NiteshPandit) Storage, retreival and process of continuous streaming data in a widearea frequency measurement system NiteshPandit Storage, retreival and process of continuous streaming data in a Wide Area Frequency Measurement System and further analysis to generate the flags and alerts. Power System Network is continuously subjected to disturbances in the form of sudden load and generation changes. These disturbances give rise to oscillations in the rotor angle which are also seen in the frequency. To study these oscillations wide area frequency measurement setup is implemented in this project. The setup are strategically placed in five different places in India and are time synchronized via Network Time Protocol (NTP). The frequency is measured every 20 ms and is time stamped and send through internet to a server in IITB. The server program which is continuously receiving the packets, checking the correctness of packet information, doing the insertion in database according their time and displaying it on the web. In ‘Wide area frequency measurement system’ frequencies measured at different places in India are sent to a IITB Server. Frequencies are measured by sensors at every 20 ms. Local frequency measured is stamped with the time and place and sent to IITB Server. The IITB server is continuously listening for the packets on UDP port 6000. When a packet is received, it extracts the data and writes it in a file. A separate file is created for each sensor and when any file reaches its maximum a new file is created for each sensor with incremented serial number. Plotting of this data is done offline. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/storageretreivalandprocessofcontinuousstreamingdatainawideareafrequencymeasurementsystem-111101010624-phpapp02-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> Storage, retreival and process of continuous streaming data in a Wide Area Frequency Measurement System and further analysis to generate the flags and alerts. Power System Network is continuously subjected to disturbances in the form of sudden load and generation changes. These disturbances give rise to oscillations in the rotor angle which are also seen in the frequency. To study these oscillations wide area frequency measurement setup is implemented in this project. The setup are strategically placed in five different places in India and are time synchronized via Network Time Protocol (NTP). The frequency is measured every 20 ms and is time stamped and send through internet to a server in IITB. The server program which is continuously receiving the packets, checking the correctness of packet information, doing the insertion in database according their time and displaying it on the web. In ‘Wide area frequency measurement system’ frequencies measured at different places in India are sent to a IITB Server. Frequencies are measured by sensors at every 20 ms. Local frequency measured is stamped with the time and place and sent to IITB Server. The IITB server is continuously listening for the packets on UDP port 6000. When a packet is received, it extracts the data and writes it in a file. A separate file is created for each sensor and when any file reaches its maximum a new file is created for each sensor with incremented serial number. Plotting of this data is done offline.
Storage, retreival and process of continuous streaming data in a widearea frequency measurement system from Nitesh Pandit
]]>
339 2 https://cdn.slidesharecdn.com/ss_thumbnails/storageretreivalandprocessofcontinuousstreamingdatainawideareafrequencymeasurementsystem-111101010624-phpapp02-thumbnail.jpg?width=120&height=120&fit=bounds document Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0
iPDC User Manual /slideshow/ipdc-user-manual/9970644 ipdcusermanual-111101010041-phpapp02
The use of synchrophasors for monitoring and improving the stability of power transmission networks is gaining in significance all over the world. The aim is to monitor the system state, to intensify awareness for system stability and to make optimal use of existing lines. This way, system stability can be improved overall and even the transmission performance can be increased. The data from so many PMU’s and PDC’s needs to be collected and directed to proper channels for its efficient use. Thus we need to develop an efficient, flexible and hybrid data concentrator that can serve this purpose. Besides accepting the data from PMU’s, PDC should be able to accept the data also from other PDC. We have designed such a PDC (iPDC) that accepts data from PMU & PDC that are IEEEC37.118 standard compliant. WAMS architecture with iPDC and PMU at different levels. This architecture enables iPDC to receive data either from a PMU or other iPDC. Both PMU and iPDC from whom the data is being received should be IEEE C37.118 synchrophasor standard compliant. It is hybrid architecture. iPDC Design The client server architecture is common in networks when two peers are communicating with each other. Of the two peers (PMU and iPDC) that are communicating with each other in WAMS one acts as a client and the other as a server. Since PMU saves the requests coming from iPDC by sending data or configuration frames it acts as a server. It listens for command frames from iPDC. PMU-iPDC communication can be either over TCP or UDP communication protocols. On receiving command frames, PMU replies to the iPDC with data or configuration frames according to the type of request. iPDC functionality is bifurcated as server and client. iPDC as a Client - When iPDC receives data or configuration frames its acts as a client. When acting as a client, it creates a new thread for each PMU or a PDC from whom it is going to receive data/configuration frames. This thread would establish connection between the two communication entities. It handles both TCP and UDP connections. The first frame that the server (PMU/PDC) would receive is the command for sending the configuration frame. When the server replies with the configuration frame, iPDC (client) would generate another request to start sending the data frames. On receiving such a command frame, the server starts sending the data frames. If there is some change in the status bits of data frame which the client (iPDC) notices, it would take an action. For example if it notices a bit 10 has been set, it would internally send a command to server to send the latest configuration frame. iPDC as a Server- When iPDC receives command frames from another PDC it would acts as a server. There would be two reserved ports one for UDP and other for TCP on which the PDC would receive command frame requests. Thus PDC now plays the role of PMU waiting for command frames.]]>

The use of synchrophasors for monitoring and improving the stability of power transmission networks is gaining in significance all over the world. The aim is to monitor the system state, to intensify awareness for system stability and to make optimal use of existing lines. This way, system stability can be improved overall and even the transmission performance can be increased. The data from so many PMU’s and PDC’s needs to be collected and directed to proper channels for its efficient use. Thus we need to develop an efficient, flexible and hybrid data concentrator that can serve this purpose. Besides accepting the data from PMU’s, PDC should be able to accept the data also from other PDC. We have designed such a PDC (iPDC) that accepts data from PMU & PDC that are IEEEC37.118 standard compliant. WAMS architecture with iPDC and PMU at different levels. This architecture enables iPDC to receive data either from a PMU or other iPDC. Both PMU and iPDC from whom the data is being received should be IEEE C37.118 synchrophasor standard compliant. It is hybrid architecture. iPDC Design The client server architecture is common in networks when two peers are communicating with each other. Of the two peers (PMU and iPDC) that are communicating with each other in WAMS one acts as a client and the other as a server. Since PMU saves the requests coming from iPDC by sending data or configuration frames it acts as a server. It listens for command frames from iPDC. PMU-iPDC communication can be either over TCP or UDP communication protocols. On receiving command frames, PMU replies to the iPDC with data or configuration frames according to the type of request. iPDC functionality is bifurcated as server and client. iPDC as a Client - When iPDC receives data or configuration frames its acts as a client. When acting as a client, it creates a new thread for each PMU or a PDC from whom it is going to receive data/configuration frames. This thread would establish connection between the two communication entities. It handles both TCP and UDP connections. The first frame that the server (PMU/PDC) would receive is the command for sending the configuration frame. When the server replies with the configuration frame, iPDC (client) would generate another request to start sending the data frames. On receiving such a command frame, the server starts sending the data frames. If there is some change in the status bits of data frame which the client (iPDC) notices, it would take an action. For example if it notices a bit 10 has been set, it would internally send a command to server to send the latest configuration frame. iPDC as a Server- When iPDC receives command frames from another PDC it would acts as a server. There would be two reserved ports one for UDP and other for TCP on which the PDC would receive command frame requests. Thus PDC now plays the role of PMU waiting for command frames.]]>
Tue, 01 Nov 2011 01:00:39 GMT /slideshow/ipdc-user-manual/9970644 NiteshPandit@slideshare.net(NiteshPandit) iPDC User Manual NiteshPandit The use of synchrophasors for monitoring and improving the stability of power transmission networks is gaining in significance all over the world. The aim is to monitor the system state, to intensify awareness for system stability and to make optimal use of existing lines. This way, system stability can be improved overall and even the transmission performance can be increased. The data from so many PMU’s and PDC’s needs to be collected and directed to proper channels for its efficient use. Thus we need to develop an efficient, flexible and hybrid data concentrator that can serve this purpose. Besides accepting the data from PMU’s, PDC should be able to accept the data also from other PDC. We have designed such a PDC (iPDC) that accepts data from PMU & PDC that are IEEEC37.118 standard compliant. WAMS architecture with iPDC and PMU at different levels. This architecture enables iPDC to receive data either from a PMU or other iPDC. Both PMU and iPDC from whom the data is being received should be IEEE C37.118 synchrophasor standard compliant. It is hybrid architecture. iPDC Design The client server architecture is common in networks when two peers are communicating with each other. Of the two peers (PMU and iPDC) that are communicating with each other in WAMS one acts as a client and the other as a server. Since PMU saves the requests coming from iPDC by sending data or configuration frames it acts as a server. It listens for command frames from iPDC. PMU-iPDC communication can be either over TCP or UDP communication protocols. On receiving command frames, PMU replies to the iPDC with data or configuration frames according to the type of request. iPDC functionality is bifurcated as server and client. iPDC as a Client - When iPDC receives data or configuration frames its acts as a client. When acting as a client, it creates a new thread for each PMU or a PDC from whom it is going to receive data/configuration frames. This thread would establish connection between the two communication entities. It handles both TCP and UDP connections. The first frame that the server (PMU/PDC) would receive is the command for sending the configuration frame. When the server replies with the configuration frame, iPDC (client) would generate another request to start sending the data frames. On receiving such a command frame, the server starts sending the data frames. If there is some change in the status bits of data frame which the client (iPDC) notices, it would take an action. For example if it notices a bit 10 has been set, it would internally send a command to server to send the latest configuration frame. iPDC as a Server- When iPDC receives command frames from another PDC it would acts as a server. There would be two reserved ports one for UDP and other for TCP on which the PDC would receive command frame requests. Thus PDC now plays the role of PMU waiting for command frames. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/ipdcusermanual-111101010041-phpapp02-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> The use of synchrophasors for monitoring and improving the stability of power transmission networks is gaining in significance all over the world. The aim is to monitor the system state, to intensify awareness for system stability and to make optimal use of existing lines. This way, system stability can be improved overall and even the transmission performance can be increased. The data from so many PMU’s and PDC’s needs to be collected and directed to proper channels for its efficient use. Thus we need to develop an efficient, flexible and hybrid data concentrator that can serve this purpose. Besides accepting the data from PMU’s, PDC should be able to accept the data also from other PDC. We have designed such a PDC (iPDC) that accepts data from PMU &amp; PDC that are IEEEC37.118 standard compliant. WAMS architecture with iPDC and PMU at different levels. This architecture enables iPDC to receive data either from a PMU or other iPDC. Both PMU and iPDC from whom the data is being received should be IEEE C37.118 synchrophasor standard compliant. It is hybrid architecture. iPDC Design The client server architecture is common in networks when two peers are communicating with each other. Of the two peers (PMU and iPDC) that are communicating with each other in WAMS one acts as a client and the other as a server. Since PMU saves the requests coming from iPDC by sending data or configuration frames it acts as a server. It listens for command frames from iPDC. PMU-iPDC communication can be either over TCP or UDP communication protocols. On receiving command frames, PMU replies to the iPDC with data or configuration frames according to the type of request. iPDC functionality is bifurcated as server and client. iPDC as a Client - When iPDC receives data or configuration frames its acts as a client. When acting as a client, it creates a new thread for each PMU or a PDC from whom it is going to receive data/configuration frames. This thread would establish connection between the two communication entities. It handles both TCP and UDP connections. The first frame that the server (PMU/PDC) would receive is the command for sending the configuration frame. When the server replies with the configuration frame, iPDC (client) would generate another request to start sending the data frames. On receiving such a command frame, the server starts sending the data frames. If there is some change in the status bits of data frame which the client (iPDC) notices, it would take an action. For example if it notices a bit 10 has been set, it would internally send a command to server to send the latest configuration frame. iPDC as a Server- When iPDC receives command frames from another PDC it would acts as a server. There would be two reserved ports one for UDP and other for TCP on which the PDC would receive command frame requests. Thus PDC now plays the role of PMU waiting for command frames.
iPDC User Manual from Nitesh Pandit
]]>
638 4 https://cdn.slidesharecdn.com/ss_thumbnails/ipdcusermanual-111101010041-phpapp02-thumbnail.jpg?width=120&height=120&fit=bounds document Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0
iPDC Programmer Manual /NiteshPandit/ipdc-programmer-manual ipdcprogrammermanual-111101005546-phpapp01
]]>

]]>
Tue, 01 Nov 2011 00:55:42 GMT /NiteshPandit/ipdc-programmer-manual NiteshPandit@slideshare.net(NiteshPandit) iPDC Programmer Manual NiteshPandit <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/ipdcprogrammermanual-111101005546-phpapp01-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br>
iPDC Programmer Manual from Nitesh Pandit
]]>
483 3 https://cdn.slidesharecdn.com/ss_thumbnails/ipdcprogrammermanual-111101005546-phpapp01-thumbnail.jpg?width=120&height=120&fit=bounds document Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0
Design & implementation of phasor data concentrator compliant to ieee c37.118 synchrophasor standard in wide area measurement system /slideshow/design-implementation-of-phasor-data-concentrator-compliant-to-ieee-c37118-synchrophasor-standard-in-wide-area-measurement-system/9970536 designimplementationofphasordataconcentratorcomplianttoieeec37-118synchrophasorstandardinwideareameasurementsystem-111101004401-phpapp01
The use of synchrophasors for monitoring and improving the stability of power transmission networks is gaining in significance all over the world. The aim is to monitor the system state, to intensify awareness for system stability and to make optimal use of existing lines. This way, system stability can be improved overall and even the transmission performance can be increased. The data from so many PMU’s and PDC’s needs to be collected and directed to proper channels for its efficient use. Thus we need to develop an efficient, flexible and hybrid data concentrator that can serve this purpose. Besides accepting the data from PMU’s, PDC should be able to accept the data also from other PDC. We have designed such a PDC (iPDC) that accepts data from PMU & PDC that are IEEEC37.118 standard compliant. WAMS architecture with iPDC and PMU at different levels. This architecture enables iPDC to receive data either from a PMU or other iPDC. Both PMU and iPDC from whom the data is being received should be IEEE C37.118 synchrophasor standard compliant. It is hybrid architecture. iPDC Design The client server architecture is common in networks when two peers are communicating with each other. Of the two peers (PMU and iPDC) that are communicating with each other in WAMS one acts as a client and the other as a server. Since PMU saves the requests coming from iPDC by sending data or configuration frames it acts as a server. It listens for command frames from iPDC. PMU-iPDC communication can be either over TCP or UDP communication protocols. On receiving command frames, PMU replies to the iPDC with data or configuration frames according to the type of request. iPDC functionality is bifurcated as server and client. iPDC as a Client - When iPDC receives data or configuration frames its acts as a client. When acting as a client, it creates a new thread for each PMU or a PDC from whom it is going to receive data/configuration frames. This thread would establish connection between the two communication entities. It handles both TCP and UDP connections. The first frame that the server (PMU/PDC) would receive is the command for sending the configuration frame. When the server replies with the configuration frame, iPDC (client) would generate another request to start sending the data frames. On receiving such a command frame, the server starts sending the data frames. If there is some change in the status bits of data frame which the client (iPDC) notices, it would take an action. For example if it notices a bit 10 has been set, it would internally send a command to server to send the latest configuration frame. iPDC as a Server- When iPDC receives command frames from another PDC it would acts as a server. There would be two reserved ports one for UDP and other for TCP on which the PDC would receive command frame requests. Thus PDC now plays the role of PMU waiting for command frames.]]>

The use of synchrophasors for monitoring and improving the stability of power transmission networks is gaining in significance all over the world. The aim is to monitor the system state, to intensify awareness for system stability and to make optimal use of existing lines. This way, system stability can be improved overall and even the transmission performance can be increased. The data from so many PMU’s and PDC’s needs to be collected and directed to proper channels for its efficient use. Thus we need to develop an efficient, flexible and hybrid data concentrator that can serve this purpose. Besides accepting the data from PMU’s, PDC should be able to accept the data also from other PDC. We have designed such a PDC (iPDC) that accepts data from PMU & PDC that are IEEEC37.118 standard compliant. WAMS architecture with iPDC and PMU at different levels. This architecture enables iPDC to receive data either from a PMU or other iPDC. Both PMU and iPDC from whom the data is being received should be IEEE C37.118 synchrophasor standard compliant. It is hybrid architecture. iPDC Design The client server architecture is common in networks when two peers are communicating with each other. Of the two peers (PMU and iPDC) that are communicating with each other in WAMS one acts as a client and the other as a server. Since PMU saves the requests coming from iPDC by sending data or configuration frames it acts as a server. It listens for command frames from iPDC. PMU-iPDC communication can be either over TCP or UDP communication protocols. On receiving command frames, PMU replies to the iPDC with data or configuration frames according to the type of request. iPDC functionality is bifurcated as server and client. iPDC as a Client - When iPDC receives data or configuration frames its acts as a client. When acting as a client, it creates a new thread for each PMU or a PDC from whom it is going to receive data/configuration frames. This thread would establish connection between the two communication entities. It handles both TCP and UDP connections. The first frame that the server (PMU/PDC) would receive is the command for sending the configuration frame. When the server replies with the configuration frame, iPDC (client) would generate another request to start sending the data frames. On receiving such a command frame, the server starts sending the data frames. If there is some change in the status bits of data frame which the client (iPDC) notices, it would take an action. For example if it notices a bit 10 has been set, it would internally send a command to server to send the latest configuration frame. iPDC as a Server- When iPDC receives command frames from another PDC it would acts as a server. There would be two reserved ports one for UDP and other for TCP on which the PDC would receive command frame requests. Thus PDC now plays the role of PMU waiting for command frames.]]>
Tue, 01 Nov 2011 00:43:58 GMT /slideshow/design-implementation-of-phasor-data-concentrator-compliant-to-ieee-c37118-synchrophasor-standard-in-wide-area-measurement-system/9970536 NiteshPandit@slideshare.net(NiteshPandit) Design & implementation of phasor data concentrator compliant to ieee c37.118 synchrophasor standard in wide area measurement system NiteshPandit The use of synchrophasors for monitoring and improving the stability of power transmission networks is gaining in significance all over the world. The aim is to monitor the system state, to intensify awareness for system stability and to make optimal use of existing lines. This way, system stability can be improved overall and even the transmission performance can be increased. The data from so many PMU’s and PDC’s needs to be collected and directed to proper channels for its efficient use. Thus we need to develop an efficient, flexible and hybrid data concentrator that can serve this purpose. Besides accepting the data from PMU’s, PDC should be able to accept the data also from other PDC. We have designed such a PDC (iPDC) that accepts data from PMU & PDC that are IEEEC37.118 standard compliant. WAMS architecture with iPDC and PMU at different levels. This architecture enables iPDC to receive data either from a PMU or other iPDC. Both PMU and iPDC from whom the data is being received should be IEEE C37.118 synchrophasor standard compliant. It is hybrid architecture. iPDC Design The client server architecture is common in networks when two peers are communicating with each other. Of the two peers (PMU and iPDC) that are communicating with each other in WAMS one acts as a client and the other as a server. Since PMU saves the requests coming from iPDC by sending data or configuration frames it acts as a server. It listens for command frames from iPDC. PMU-iPDC communication can be either over TCP or UDP communication protocols. On receiving command frames, PMU replies to the iPDC with data or configuration frames according to the type of request. iPDC functionality is bifurcated as server and client. iPDC as a Client - When iPDC receives data or configuration frames its acts as a client. When acting as a client, it creates a new thread for each PMU or a PDC from whom it is going to receive data/configuration frames. This thread would establish connection between the two communication entities. It handles both TCP and UDP connections. The first frame that the server (PMU/PDC) would receive is the command for sending the configuration frame. When the server replies with the configuration frame, iPDC (client) would generate another request to start sending the data frames. On receiving such a command frame, the server starts sending the data frames. If there is some change in the status bits of data frame which the client (iPDC) notices, it would take an action. For example if it notices a bit 10 has been set, it would internally send a command to server to send the latest configuration frame. iPDC as a Server- When iPDC receives command frames from another PDC it would acts as a server. There would be two reserved ports one for UDP and other for TCP on which the PDC would receive command frame requests. Thus PDC now plays the role of PMU waiting for command frames. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/designimplementationofphasordataconcentratorcomplianttoieeec37-118synchrophasorstandardinwideareameasurementsystem-111101004401-phpapp01-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> The use of synchrophasors for monitoring and improving the stability of power transmission networks is gaining in significance all over the world. The aim is to monitor the system state, to intensify awareness for system stability and to make optimal use of existing lines. This way, system stability can be improved overall and even the transmission performance can be increased. The data from so many PMU’s and PDC’s needs to be collected and directed to proper channels for its efficient use. Thus we need to develop an efficient, flexible and hybrid data concentrator that can serve this purpose. Besides accepting the data from PMU’s, PDC should be able to accept the data also from other PDC. We have designed such a PDC (iPDC) that accepts data from PMU &amp; PDC that are IEEEC37.118 standard compliant. WAMS architecture with iPDC and PMU at different levels. This architecture enables iPDC to receive data either from a PMU or other iPDC. Both PMU and iPDC from whom the data is being received should be IEEE C37.118 synchrophasor standard compliant. It is hybrid architecture. iPDC Design The client server architecture is common in networks when two peers are communicating with each other. Of the two peers (PMU and iPDC) that are communicating with each other in WAMS one acts as a client and the other as a server. Since PMU saves the requests coming from iPDC by sending data or configuration frames it acts as a server. It listens for command frames from iPDC. PMU-iPDC communication can be either over TCP or UDP communication protocols. On receiving command frames, PMU replies to the iPDC with data or configuration frames according to the type of request. iPDC functionality is bifurcated as server and client. iPDC as a Client - When iPDC receives data or configuration frames its acts as a client. When acting as a client, it creates a new thread for each PMU or a PDC from whom it is going to receive data/configuration frames. This thread would establish connection between the two communication entities. It handles both TCP and UDP connections. The first frame that the server (PMU/PDC) would receive is the command for sending the configuration frame. When the server replies with the configuration frame, iPDC (client) would generate another request to start sending the data frames. On receiving such a command frame, the server starts sending the data frames. If there is some change in the status bits of data frame which the client (iPDC) notices, it would take an action. For example if it notices a bit 10 has been set, it would internally send a command to server to send the latest configuration frame. iPDC as a Server- When iPDC receives command frames from another PDC it would acts as a server. There would be two reserved ports one for UDP and other for TCP on which the PDC would receive command frame requests. Thus PDC now plays the role of PMU waiting for command frames.
Design & implementation of phasor data concentrator compliant to ieee c37.118 synchrophasor standard in wide area measurement system from Nitesh Pandit
]]>
883 2 https://cdn.slidesharecdn.com/ss_thumbnails/designimplementationofphasordataconcentratorcomplianttoieeec37-118synchrophasorstandardinwideareameasurementsystem-111101004401-phpapp01-thumbnail.jpg?width=120&height=120&fit=bounds presentation Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0
Phasor data concentrator or i pdc /slideshow/phasor-data-concentrator-or-i-pdc/9970370 phasordataconcentratororipdc-111101002044-phpapp02
]]>

]]>
Tue, 01 Nov 2011 00:20:42 GMT /slideshow/phasor-data-concentrator-or-i-pdc/9970370 NiteshPandit@slideshare.net(NiteshPandit) Phasor data concentrator or i pdc NiteshPandit <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/phasordataconcentratororipdc-111101002044-phpapp02-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br>
Phasor data concentrator or i pdc from Nitesh Pandit
]]>
1025 1 https://cdn.slidesharecdn.com/ss_thumbnails/phasordataconcentratororipdc-111101002044-phpapp02-thumbnail.jpg?width=120&height=120&fit=bounds presentation Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0
https://cdn.slidesharecdn.com/profile-photo-NiteshPandit-48x48.jpg?cb=1522980810 Will let you know shortly :) ipdc.codeplex.com/ https://cdn.slidesharecdn.com/ss_thumbnails/ipdcv130acompletetechnicalreportincludingipdcpmusimulatoranddbserver-13415186376931-phpapp02-120705150814-phpapp02-thumbnail.jpg?width=320&height=320&fit=bounds slideshow/i-pdc-v130-a-complete-technical-report-including-i-pdc-pmu-simulator-and-db-server/13555548 I Pdc V1.3.0 A Compl... https://cdn.slidesharecdn.com/ss_thumbnails/ipdc-v1-3-0-acompletetechnicalreportincludingipdcpmusimulatoranddbserver-120705145325-phpapp02-thumbnail.jpg?width=320&height=320&fit=bounds NiteshPandit/i-pdc-v130-a-complete-technical-report-including-ipdc-pmusimulator-and-dbserver iPDC-v1.3.0 - A Comple... https://cdn.slidesharecdn.com/ss_thumbnails/ipdcreportnitesh-111101011201-phpapp02-thumbnail.jpg?width=320&height=320&fit=bounds slideshow/ipdc-report-nitesh/9970748 iPDC Report Nitesh