際際滷shows by User: RedwanFerdous / http://www.slideshare.net/images/logo.gif 際際滷shows by User: RedwanFerdous / Mon, 09 Sep 2024 20:11:26 GMT 際際滷Share feed for 際際滷shows by User: RedwanFerdous Lecture-2_Basic Circuits & Intro to Arduino_2024_EDGE_Jahangirnagar University.pdf /slideshow/lecture-2_basic-circuits-intro-to-arduino_2024_edge_jahangirnagar-university-pdf/271680754 lecture-2basiccircuitsintrotoarduino2024edgejahangirnagaruniversity-240909201127-056ab9f4
Lecture-2_Basic Circuits & Intro to Arduino_2024_EDGE_Jahangirnagar University covers the basic elements of electronics circuits i.e. resistors, capacitors, ohms law, KVL, KCL, voltage divider rule, half wave rectifier, full wave rectifier etc. Also includes the 1st hands on experience of initializing Arduino Uno by the participants and doing the blink project. ]]>
Lecture-2_Basic Circuits & Intro to Arduino_2024_EDGE_Jahangirnagar University covers the basic elements of electronics circuits i.e. resistors, capacitors, ohms law, KVL, KCL, voltage divider rule, half wave rectifier, full wave rectifier etc. Also includes the 1st hands on experience of initializing Arduino Uno by the participants and doing the blink project. ]]> Mon, 09 Sep 2024 20:11:26 GMT /slideshow/lecture-2_basic-circuits-intro-to-arduino_2024_edge_jahangirnagar-university-pdf/271680754 RedwanFerdous@slideshare.net(RedwanFerdous) Lecture-2_Basic Circuits & Intro to Arduino_2024_EDGE_Jahangirnagar University.pdf RedwanFerdous Lecture-2_Basic Circuits & Intro to Arduino_2024_EDGE_Jahangirnagar University covers the basic elements of electronics circuits i.e. resistors, capacitors, ohms law, KVL, KCL, voltage divider rule, half wave rectifier, full wave rectifier etc. Also includes the 1st hands on experience of initializing Arduino Uno by the participants and doing the blink project. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/lecture-2basiccircuitsintrotoarduino2024edgejahangirnagaruniversity-240909201127-056ab9f4-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> Lecture-2_Basic Circuits &amp; Intro to Arduino_2024_EDGE_Jahangirnagar University covers the basic elements of electronics circuits i.e. resistors, capacitors, ohms law, KVL, KCL, voltage divider rule, half wave rectifier, full wave rectifier etc. Also includes the 1st hands on experience of initializing Arduino Uno by the participants and doing the blink project.
Lecture-2_Basic Circuits & Intro to Arduino_2024_EDGE_Jahangirnagar University.pdf from Redwan Ferdous
]]> 251 0 https://cdn.slidesharecdn.com/ss_thumbnails/lecture-2basiccircuitsintrotoarduino2024edgejahangirnagaruniversity-240909201127-056ab9f4-thumbnail.jpg?width=120&height=120&fit=bounds presentation Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0 Lecture-1_IoT and Robotics skill Development Program_2024_EDGE_Jahangirnagar University /slideshow/lecture-1_iot-and-robotics-skill-development-program_2024_edge_jahangirnagar-university/271647683 lecture-1iotandroboticsskilldevelopmentprogram2024edgeju-240908122455-b4187d9c
Lecture -1 of IoT and Robotics skill Development Training Program 2024 of Jahangirnagar University covers the introduction to this course, introduction to IoT, Introduction to different sensors going to be used throughout the courses and other practical examples of IoT.]]>
Lecture -1 of IoT and Robotics skill Development Training Program 2024 of Jahangirnagar University covers the introduction to this course, introduction to IoT, Introduction to different sensors going to be used throughout the courses and other practical examples of IoT.]]> Sun, 08 Sep 2024 12:24:55 GMT /slideshow/lecture-1_iot-and-robotics-skill-development-program_2024_edge_jahangirnagar-university/271647683 RedwanFerdous@slideshare.net(RedwanFerdous) Lecture-1_IoT and Robotics skill Development Program_2024_EDGE_Jahangirnagar University RedwanFerdous Lecture -1 of IoT and Robotics skill Development Training Program 2024 of Jahangirnagar University covers the introduction to this course, introduction to IoT, Introduction to different sensors going to be used throughout the courses and other practical examples of IoT. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/lecture-1iotandroboticsskilldevelopmentprogram2024edgeju-240908122455-b4187d9c-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> Lecture -1 of IoT and Robotics skill Development Training Program 2024 of Jahangirnagar University covers the introduction to this course, introduction to IoT, Introduction to different sensors going to be used throughout the courses and other practical examples of IoT.
Lecture-1_IoT and Robotics skill Development Program_2024_EDGE_Jahangirnagar University from Redwan Ferdous
]]> 427 0 https://cdn.slidesharecdn.com/ss_thumbnails/lecture-1iotandroboticsskilldevelopmentprogram2024edgeju-240908122455-b4187d9c-thumbnail.jpg?width=120&height=120&fit=bounds presentation Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0 Workshop on IoT and Basic Home Automation_BAIUST.pptx /slideshow/workshop-on-iot-and-basic-home-automationbaiustpptx/260114223 workshoponiotandbasichomeautomationbaiust16-17aug23-230823153710-97786da5
A 2 days hands-on workshop on IoT and Basic Home Automation was held back in 16-17th August, 2023 in the campus of 'Bangladesh Army International University of Science & Technology' (BAIUST), Cumilla. There were 2 workshop expert, Mr. Redwan Ferdous- Director, FronTech Ltd. and Mr. Nahidul Alam, Lecturer, Dept of EEE, BAIUST. In total 2 days, total of 12 projects were being practiced hands-on. Total 45 participants participated in the workshop. Successful 2-days, full workshop participants achieved participation certificate. 03 best performer received crests. Media Coverages: 1) https://l.facebook.com/l.php?u=https%3A%2F%2Fwww.jagocomilla.com%2F%25e0%25a6%25ac%25e0%25a6%25be%25e0%25a6%2587%25e0%25a6%2589%25e0%25a6%25b8%25e0%25a7%258d%25e0%25a6%259f%25e0%25a7%2587-%25e0%25a6%2586%25e0%25a6%2587%25e0%25a6%2593%25e0%25a6%259f%25e0%25a6%25bf-%25e0%25a6%258f%25e0%25a6%25ac%25e0%25a6%2582-%25e0%25a6%25ac%25e0%25a7%2587%25e0%25a6%25b8%25e0%25a6%25bf%25e0%25a6%2595%2F%3Ffbclid%3DIwAR0SwfJEKqiPmXZDYbjTudVSnb6pZCI9ZTun7LRe3C5YG7U7Uj9ciU6VH7w&h=AT04ghurTxB171Iqx9jkDjpRmC4s-ljW1QDziJeDEULOwH0gTQixVxt5Ck9cDEFgcv3Lx1JFplwTnnMp9sawh2X6pjjWAe7fvReKUZMdjHDhAkRIIXvSnstZtKRbU6VfHDVG&__tn__=R]-R&c[0]=AT1AFR198waQ2tUPRvRRROX7ncbzJPe01QTOoyAp0vtDadgjaX7kIyG2tVauxEuHXt0GcbkCuvoTWd7FJ78-WSRlVRj3Fs0-FpgvP_K8F2QVuHNM_QN6yIGvcjCqTxvdMDkMDrHJ-OpuFlZc4p2HqsJ7vcqZpXslk7biWJNWJaO6k4yQrrm1Hg 2) https://l.facebook.com/l.php?u=https%3A%2F%2Fgonomanusherawaj.com%2Fothers%2F89168%2F%3Ffbclid%3DIwAR3Jut2kJ0DuS8t5e5TQYG3rMGt1eA63wdWHr2KzeXJtACRoYc45FAbBnHQ&h=AT1x-PBWSNW6TQxeOMRbtEsZE51yAd-UWWotcD8s9RU_G8khaJhWMHxWyrsZk32nB64v0Sk2dW1Stq9p68HBJbrMJX6TemYsk4TwR7yx2OrQ_N9q9PmhaFXTODlfNjjTRJoK&__tn__=R]-R&c[0]=AT1AFR198waQ2tUPRvRRROX7ncbzJPe01QTOoyAp0vtDadgjaX7kIyG2tVauxEuHXt0GcbkCuvoTWd7FJ78-WSRlVRj3Fs0-FpgvP_K8F2QVuHNM_QN6yIGvcjCqTxvdMDkMDrHJ-OpuFlZc4p2HqsJ7vcqZpXslk7biWJNWJaO6k4yQrrm1Hg 3) https://l.facebook.com/l.php?u=https%3A%2F%2Fcomillanews.com%2F%25e0%25a6%25ac%25e0%25a6%25be%25e0%25a6%2587%25e0%25a6%2589%25e0%25a6%25b8%25e0%25a7%258d%25e0%25a6%259f%25e0%25a7%2587-%25e0%25a6%25b8%25e0%25a6%25ae%25e0%25a7%258d%25e0%25a6%25aa%25e0%25a6%25a8%25e0%25a7%258d%25e0%25a6%25a8-%25e0%25a6%25b9%25e0%25a6%25b2-%25e0%25a6%2586%25e0%25a6%2587%25e0%25a6%2593%25e0%25a6%259f%3Ffbclid%3DIwAR0bFEj8N9UuFmg_WL5PPlWZefIqEohMedvFfqFKacfl8xLAmyRxb0nE6gg&h=AT0ZNYsvxPvJGFPLPch3kK_67c_W4FtZv01NUSckrCT7HPNzbhpr7TeZ26PDSMG903Vz70Lk3y5ldoTbBDV_Dz-fSU8mohXGt6jLV8yM_N1gEJ4WBP0qjQkMnyRUS4CQfF02&__tn__=R]-R&c[0]=AT1AFR198waQ2tUPRvRRROX7ncbzJPe01QTOoyAp0vtDadgjaX7kIyG2tVauxEuHXt0GcbkCuvoTWd7FJ78-WSRlVRj3Fs0-FpgvP_K8F2QVuHNM_QN6yIGvcjCqTxvdMDkMDrHJ-OpuFlZc4p2HqsJ7vcqZpXslk7biWJNWJaO6k4yQrrm1Hg]]>
A 2 days hands-on workshop on IoT and Basic Home Automation was held back in 16-17th August, 2023 in the campus of 'Bangladesh Army International University of Science & Technology' (BAIUST), Cumilla. There were 2 workshop expert, Mr. Redwan Ferdous- Director, FronTech Ltd. and Mr. Nahidul Alam, Lecturer, Dept of EEE, BAIUST. In total 2 days, total of 12 projects were being practiced hands-on. Total 45 participants participated in the workshop. Successful 2-days, full workshop participants achieved participation certificate. 03 best performer received crests. Media Coverages: 1) https://l.facebook.com/l.php?u=https%3A%2F%2Fwww.jagocomilla.com%2F%25e0%25a6%25ac%25e0%25a6%25be%25e0%25a6%2587%25e0%25a6%2589%25e0%25a6%25b8%25e0%25a7%258d%25e0%25a6%259f%25e0%25a7%2587-%25e0%25a6%2586%25e0%25a6%2587%25e0%25a6%2593%25e0%25a6%259f%25e0%25a6%25bf-%25e0%25a6%258f%25e0%25a6%25ac%25e0%25a6%2582-%25e0%25a6%25ac%25e0%25a7%2587%25e0%25a6%25b8%25e0%25a6%25bf%25e0%25a6%2595%2F%3Ffbclid%3DIwAR0SwfJEKqiPmXZDYbjTudVSnb6pZCI9ZTun7LRe3C5YG7U7Uj9ciU6VH7w&h=AT04ghurTxB171Iqx9jkDjpRmC4s-ljW1QDziJeDEULOwH0gTQixVxt5Ck9cDEFgcv3Lx1JFplwTnnMp9sawh2X6pjjWAe7fvReKUZMdjHDhAkRIIXvSnstZtKRbU6VfHDVG&__tn__=R]-R&c[0]=AT1AFR198waQ2tUPRvRRROX7ncbzJPe01QTOoyAp0vtDadgjaX7kIyG2tVauxEuHXt0GcbkCuvoTWd7FJ78-WSRlVRj3Fs0-FpgvP_K8F2QVuHNM_QN6yIGvcjCqTxvdMDkMDrHJ-OpuFlZc4p2HqsJ7vcqZpXslk7biWJNWJaO6k4yQrrm1Hg 2) https://l.facebook.com/l.php?u=https%3A%2F%2Fgonomanusherawaj.com%2Fothers%2F89168%2F%3Ffbclid%3DIwAR3Jut2kJ0DuS8t5e5TQYG3rMGt1eA63wdWHr2KzeXJtACRoYc45FAbBnHQ&h=AT1x-PBWSNW6TQxeOMRbtEsZE51yAd-UWWotcD8s9RU_G8khaJhWMHxWyrsZk32nB64v0Sk2dW1Stq9p68HBJbrMJX6TemYsk4TwR7yx2OrQ_N9q9PmhaFXTODlfNjjTRJoK&__tn__=R]-R&c[0]=AT1AFR198waQ2tUPRvRRROX7ncbzJPe01QTOoyAp0vtDadgjaX7kIyG2tVauxEuHXt0GcbkCuvoTWd7FJ78-WSRlVRj3Fs0-FpgvP_K8F2QVuHNM_QN6yIGvcjCqTxvdMDkMDrHJ-OpuFlZc4p2HqsJ7vcqZpXslk7biWJNWJaO6k4yQrrm1Hg 3) https://l.facebook.com/l.php?u=https%3A%2F%2Fcomillanews.com%2F%25e0%25a6%25ac%25e0%25a6%25be%25e0%25a6%2587%25e0%25a6%2589%25e0%25a6%25b8%25e0%25a7%258d%25e0%25a6%259f%25e0%25a7%2587-%25e0%25a6%25b8%25e0%25a6%25ae%25e0%25a7%258d%25e0%25a6%25aa%25e0%25a6%25a8%25e0%25a7%258d%25e0%25a6%25a8-%25e0%25a6%25b9%25e0%25a6%25b2-%25e0%25a6%2586%25e0%25a6%2587%25e0%25a6%2593%25e0%25a6%259f%3Ffbclid%3DIwAR0bFEj8N9UuFmg_WL5PPlWZefIqEohMedvFfqFKacfl8xLAmyRxb0nE6gg&h=AT0ZNYsvxPvJGFPLPch3kK_67c_W4FtZv01NUSckrCT7HPNzbhpr7TeZ26PDSMG903Vz70Lk3y5ldoTbBDV_Dz-fSU8mohXGt6jLV8yM_N1gEJ4WBP0qjQkMnyRUS4CQfF02&__tn__=R]-R&c[0]=AT1AFR198waQ2tUPRvRRROX7ncbzJPe01QTOoyAp0vtDadgjaX7kIyG2tVauxEuHXt0GcbkCuvoTWd7FJ78-WSRlVRj3Fs0-FpgvP_K8F2QVuHNM_QN6yIGvcjCqTxvdMDkMDrHJ-OpuFlZc4p2HqsJ7vcqZpXslk7biWJNWJaO6k4yQrrm1Hg]]> Wed, 23 Aug 2023 15:37:10 GMT /slideshow/workshop-on-iot-and-basic-home-automationbaiustpptx/260114223 RedwanFerdous@slideshare.net(RedwanFerdous) Workshop on IoT and Basic Home Automation_BAIUST.pptx RedwanFerdous A 2 days hands-on workshop on IoT and Basic Home Automation was held back in 16-17th August, 2023 in the campus of 'Bangladesh Army International University of Science & Technology' (BAIUST), Cumilla. There were 2 workshop expert, Mr. Redwan Ferdous- Director, FronTech Ltd. and Mr. Nahidul Alam, Lecturer, Dept of EEE, BAIUST. In total 2 days, total of 12 projects were being practiced hands-on. Total 45 participants participated in the workshop. Successful 2-days, full workshop participants achieved participation certificate. 03 best performer received crests. Media Coverages: 1) https://l.facebook.com/l.php?u=https%3A%2F%2Fwww.jagocomilla.com%2F%25e0%25a6%25ac%25e0%25a6%25be%25e0%25a6%2587%25e0%25a6%2589%25e0%25a6%25b8%25e0%25a7%258d%25e0%25a6%259f%25e0%25a7%2587-%25e0%25a6%2586%25e0%25a6%2587%25e0%25a6%2593%25e0%25a6%259f%25e0%25a6%25bf-%25e0%25a6%258f%25e0%25a6%25ac%25e0%25a6%2582-%25e0%25a6%25ac%25e0%25a7%2587%25e0%25a6%25b8%25e0%25a6%25bf%25e0%25a6%2595%2F%3Ffbclid%3DIwAR0SwfJEKqiPmXZDYbjTudVSnb6pZCI9ZTun7LRe3C5YG7U7Uj9ciU6VH7w&h=AT04ghurTxB171Iqx9jkDjpRmC4s-ljW1QDziJeDEULOwH0gTQixVxt5Ck9cDEFgcv3Lx1JFplwTnnMp9sawh2X6pjjWAe7fvReKUZMdjHDhAkRIIXvSnstZtKRbU6VfHDVG&__tn__=R]-R&c[0]=AT1AFR198waQ2tUPRvRRROX7ncbzJPe01QTOoyAp0vtDadgjaX7kIyG2tVauxEuHXt0GcbkCuvoTWd7FJ78-WSRlVRj3Fs0-FpgvP_K8F2QVuHNM_QN6yIGvcjCqTxvdMDkMDrHJ-OpuFlZc4p2HqsJ7vcqZpXslk7biWJNWJaO6k4yQrrm1Hg 2) https://l.facebook.com/l.php?u=https%3A%2F%2Fgonomanusherawaj.com%2Fothers%2F89168%2F%3Ffbclid%3DIwAR3Jut2kJ0DuS8t5e5TQYG3rMGt1eA63wdWHr2KzeXJtACRoYc45FAbBnHQ&h=AT1x-PBWSNW6TQxeOMRbtEsZE51yAd-UWWotcD8s9RU_G8khaJhWMHxWyrsZk32nB64v0Sk2dW1Stq9p68HBJbrMJX6TemYsk4TwR7yx2OrQ_N9q9PmhaFXTODlfNjjTRJoK&__tn__=R]-R&c[0]=AT1AFR198waQ2tUPRvRRROX7ncbzJPe01QTOoyAp0vtDadgjaX7kIyG2tVauxEuHXt0GcbkCuvoTWd7FJ78-WSRlVRj3Fs0-FpgvP_K8F2QVuHNM_QN6yIGvcjCqTxvdMDkMDrHJ-OpuFlZc4p2HqsJ7vcqZpXslk7biWJNWJaO6k4yQrrm1Hg 3) https://l.facebook.com/l.php?u=https%3A%2F%2Fcomillanews.com%2F%25e0%25a6%25ac%25e0%25a6%25be%25e0%25a6%2587%25e0%25a6%2589%25e0%25a6%25b8%25e0%25a7%258d%25e0%25a6%259f%25e0%25a7%2587-%25e0%25a6%25b8%25e0%25a6%25ae%25e0%25a7%258d%25e0%25a6%25aa%25e0%25a6%25a8%25e0%25a7%258d%25e0%25a6%25a8-%25e0%25a6%25b9%25e0%25a6%25b2-%25e0%25a6%2586%25e0%25a6%2587%25e0%25a6%2593%25e0%25a6%259f%3Ffbclid%3DIwAR0bFEj8N9UuFmg_WL5PPlWZefIqEohMedvFfqFKacfl8xLAmyRxb0nE6gg&h=AT0ZNYsvxPvJGFPLPch3kK_67c_W4FtZv01NUSckrCT7HPNzbhpr7TeZ26PDSMG903Vz70Lk3y5ldoTbBDV_Dz-fSU8mohXGt6jLV8yM_N1gEJ4WBP0qjQkMnyRUS4CQfF02&__tn__=R]-R&c[0]=AT1AFR198waQ2tUPRvRRROX7ncbzJPe01QTOoyAp0vtDadgjaX7kIyG2tVauxEuHXt0GcbkCuvoTWd7FJ78-WSRlVRj3Fs0-FpgvP_K8F2QVuHNM_QN6yIGvcjCqTxvdMDkMDrHJ-OpuFlZc4p2HqsJ7vcqZpXslk7biWJNWJaO6k4yQrrm1Hg <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/workshoponiotandbasichomeautomationbaiust16-17aug23-230823153710-97786da5-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> A 2 days hands-on workshop on IoT and Basic Home Automation was held back in 16-17th August, 2023 in the campus of &#39;Bangladesh Army International University of Science &amp; Technology&#39; (BAIUST), Cumilla. There were 2 workshop expert, Mr. Redwan Ferdous- Director, FronTech Ltd. and Mr. Nahidul Alam, Lecturer, Dept of EEE, BAIUST. In total 2 days, total of 12 projects were being practiced hands-on. Total 45 participants participated in the workshop. Successful 2-days, full workshop participants achieved participation certificate. 03 best performer received crests. Media Coverages: 1) https://l.facebook.com/l.php?u=https%3A%2F%2Fwww.jagocomilla.com%2F%25e0%25a6%25ac%25e0%25a6%25be%25e0%25a6%2587%25e0%25a6%2589%25e0%25a6%25b8%25e0%25a7%258d%25e0%25a6%259f%25e0%25a7%2587-%25e0%25a6%2586%25e0%25a6%2587%25e0%25a6%2593%25e0%25a6%259f%25e0%25a6%25bf-%25e0%25a6%258f%25e0%25a6%25ac%25e0%25a6%2582-%25e0%25a6%25ac%25e0%25a7%2587%25e0%25a6%25b8%25e0%25a6%25bf%25e0%25a6%2595%2F%3Ffbclid%3DIwAR0SwfJEKqiPmXZDYbjTudVSnb6pZCI9ZTun7LRe3C5YG7U7Uj9ciU6VH7w&amp;h=AT04ghurTxB171Iqx9jkDjpRmC4s-ljW1QDziJeDEULOwH0gTQixVxt5Ck9cDEFgcv3Lx1JFplwTnnMp9sawh2X6pjjWAe7fvReKUZMdjHDhAkRIIXvSnstZtKRbU6VfHDVG&amp;__tn__=R]-R&amp;c[0]=AT1AFR198waQ2tUPRvRRROX7ncbzJPe01QTOoyAp0vtDadgjaX7kIyG2tVauxEuHXt0GcbkCuvoTWd7FJ78-WSRlVRj3Fs0-FpgvP_K8F2QVuHNM_QN6yIGvcjCqTxvdMDkMDrHJ-OpuFlZc4p2HqsJ7vcqZpXslk7biWJNWJaO6k4yQrrm1Hg 2) https://l.facebook.com/l.php?u=https%3A%2F%2Fgonomanusherawaj.com%2Fothers%2F89168%2F%3Ffbclid%3DIwAR3Jut2kJ0DuS8t5e5TQYG3rMGt1eA63wdWHr2KzeXJtACRoYc45FAbBnHQ&amp;h=AT1x-PBWSNW6TQxeOMRbtEsZE51yAd-UWWotcD8s9RU_G8khaJhWMHxWyrsZk32nB64v0Sk2dW1Stq9p68HBJbrMJX6TemYsk4TwR7yx2OrQ_N9q9PmhaFXTODlfNjjTRJoK&amp;__tn__=R]-R&amp;c[0]=AT1AFR198waQ2tUPRvRRROX7ncbzJPe01QTOoyAp0vtDadgjaX7kIyG2tVauxEuHXt0GcbkCuvoTWd7FJ78-WSRlVRj3Fs0-FpgvP_K8F2QVuHNM_QN6yIGvcjCqTxvdMDkMDrHJ-OpuFlZc4p2HqsJ7vcqZpXslk7biWJNWJaO6k4yQrrm1Hg 3) https://l.facebook.com/l.php?u=https%3A%2F%2Fcomillanews.com%2F%25e0%25a6%25ac%25e0%25a6%25be%25e0%25a6%2587%25e0%25a6%2589%25e0%25a6%25b8%25e0%25a7%258d%25e0%25a6%259f%25e0%25a7%2587-%25e0%25a6%25b8%25e0%25a6%25ae%25e0%25a7%258d%25e0%25a6%25aa%25e0%25a6%25a8%25e0%25a7%258d%25e0%25a6%25a8-%25e0%25a6%25b9%25e0%25a6%25b2-%25e0%25a6%2586%25e0%25a6%2587%25e0%25a6%2593%25e0%25a6%259f%3Ffbclid%3DIwAR0bFEj8N9UuFmg_WL5PPlWZefIqEohMedvFfqFKacfl8xLAmyRxb0nE6gg&amp;h=AT0ZNYsvxPvJGFPLPch3kK_67c_W4FtZv01NUSckrCT7HPNzbhpr7TeZ26PDSMG903Vz70Lk3y5ldoTbBDV_Dz-fSU8mohXGt6jLV8yM_N1gEJ4WBP0qjQkMnyRUS4CQfF02&amp;__tn__=R]-R&amp;c[0]=AT1AFR198waQ2tUPRvRRROX7ncbzJPe01QTOoyAp0vtDadgjaX7kIyG2tVauxEuHXt0GcbkCuvoTWd7FJ78-WSRlVRj3Fs0-FpgvP_K8F2QVuHNM_QN6yIGvcjCqTxvdMDkMDrHJ-OpuFlZc4p2HqsJ7vcqZpXslk7biWJNWJaO6k4yQrrm1Hg
Workshop on IoT and Basic Home Automation_BAIUST.pptx from Redwan Ferdous
]]> 221 0 https://cdn.slidesharecdn.com/ss_thumbnails/workshoponiotandbasichomeautomationbaiust16-17aug23-230823153710-97786da5-thumbnail.jpg?width=120&height=120&fit=bounds presentation Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0 Hands On Workshop on IoT: From Arduino to JRC Board /slideshow/hands-on-workshop-on-iot-from-arduino-to-jrc-board/259900510 reallifeimplementationofroboticsworkshopwithjrcboard-230815173043-706f9098
Hands On Workshop on IoT: From Arduino to JRC Board named workshop held at University of Rajshahi on 12th August, 2023. Total 68 students from 04 different universities of North Bengal participated in the workshop and experienced 14 projects by hand.]]>
Hands On Workshop on IoT: From Arduino to JRC Board named workshop held at University of Rajshahi on 12th August, 2023. Total 68 students from 04 different universities of North Bengal participated in the workshop and experienced 14 projects by hand.]]> Tue, 15 Aug 2023 17:30:43 GMT /slideshow/hands-on-workshop-on-iot-from-arduino-to-jrc-board/259900510 RedwanFerdous@slideshare.net(RedwanFerdous) Hands On Workshop on IoT: From Arduino to JRC Board RedwanFerdous Hands On Workshop on IoT: From Arduino to JRC Board named workshop held at University of Rajshahi on 12th August, 2023. Total 68 students from 04 different universities of North Bengal participated in the workshop and experienced 14 projects by hand. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/reallifeimplementationofroboticsworkshopwithjrcboard-230815173043-706f9098-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> Hands On Workshop on IoT: From Arduino to JRC Board named workshop held at University of Rajshahi on 12th August, 2023. Total 68 students from 04 different universities of North Bengal participated in the workshop and experienced 14 projects by hand.
Hands On Workshop on IoT: From Arduino to JRC Board from Redwan Ferdous
]]> 169 0 https://cdn.slidesharecdn.com/ss_thumbnails/reallifeimplementationofroboticsworkshopwithjrcboard-230815173043-706f9098-thumbnail.jpg?width=120&height=120&fit=bounds presentation Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0 Road to 4th Industrial Revolution [for NDC Science Club] /slideshow/road-to-4th-industrial-revolution-for-ndc-science-club/251331868 roadto4thirndc12mar22-220311194333
For Notre Dame Science Club Festival on 12th March, 2022 By Redwan Ferdous www.redwanferdous.com ]]>
For Notre Dame Science Club Festival on 12th March, 2022 By Redwan Ferdous www.redwanferdous.com ]]> Fri, 11 Mar 2022 19:43:33 GMT /slideshow/road-to-4th-industrial-revolution-for-ndc-science-club/251331868 RedwanFerdous@slideshare.net(RedwanFerdous) Road to 4th Industrial Revolution [for NDC Science Club] RedwanFerdous For Notre Dame Science Club Festival on 12th March, 2022 By Redwan Ferdous www.redwanferdous.com <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/roadto4thirndc12mar22-220311194333-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> For Notre Dame Science Club Festival on 12th March, 2022 By Redwan Ferdous www.redwanferdous.com
Road to 4th Industrial Revolution [for NDC Science Club] from Redwan Ferdous
]]> 194 0 https://cdn.slidesharecdn.com/ss_thumbnails/roadto4thirndc12mar22-220311194333-thumbnail.jpg?width=120&height=120&fit=bounds presentation Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0 Amazing IoT (Maker Lab, EMK Center) /slideshow/amazing-iot-maker-lab-emk-center/250919508 iotinreallifeemk-211230033611
A webinar was conducted back in 22nd December, 2021- Wednesday by Maker Lab of EMK Center on 'Amazing IoT'- where the young generations, specially the high school students were introduced with different commercial IoT and home appliances like switch, socket, dimmer, google home, amazon Alexa etc. Different world trends and future career scopes were also discussed.]]>
A webinar was conducted back in 22nd December, 2021- Wednesday by Maker Lab of EMK Center on 'Amazing IoT'- where the young generations, specially the high school students were introduced with different commercial IoT and home appliances like switch, socket, dimmer, google home, amazon Alexa etc. Different world trends and future career scopes were also discussed.]]> Thu, 30 Dec 2021 03:36:11 GMT /slideshow/amazing-iot-maker-lab-emk-center/250919508 RedwanFerdous@slideshare.net(RedwanFerdous) Amazing IoT (Maker Lab, EMK Center) RedwanFerdous A webinar was conducted back in 22nd December, 2021- Wednesday by Maker Lab of EMK Center on 'Amazing IoT'- where the young generations, specially the high school students were introduced with different commercial IoT and home appliances like switch, socket, dimmer, google home, amazon Alexa etc. Different world trends and future career scopes were also discussed. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/iotinreallifeemk-211230033611-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> A webinar was conducted back in 22nd December, 2021- Wednesday by Maker Lab of EMK Center on &#39;Amazing IoT&#39;- where the young generations, specially the high school students were introduced with different commercial IoT and home appliances like switch, socket, dimmer, google home, amazon Alexa etc. Different world trends and future career scopes were also discussed.
Amazing IoT (Maker Lab, EMK Center) from Redwan Ferdous
]]> 160 0 https://cdn.slidesharecdn.com/ss_thumbnails/iotinreallifeemk-211230033611-thumbnail.jpg?width=120&height=120&fit=bounds presentation Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0 Smart life: Hands on training on property automation design and commissioning through IoT /RedwanFerdous/smart-life-hands-on-training-on-property-automation-design-and-commissioning-through-iot smartlifehands-ontrainingonpropertyautomationdesignandcommissioningthroughiot-211230031305
Engr. Redwan Ferdous took a session on "Smart Life: Hands-On training on property automation design and commissioning through IoT" in collaboration with Dept. of CSE and BHTPA in Chittagong University of Engineering and Technology (CUET) back in 27th December-2021 Monday. In total 02 sessions, almost 120 students participated in the hands-on training. 1st session attended from 2pm-4:50pm and 2nd session attended from 5pm-6:50pm. All the participants were from L-3,T-2 of Dept. of CSE of CUET. In the session, different commercial IoT based home automation products were shown along with their controlling mechanism-practically. Also, different career and research opportunities were also discussed in the session.]]>
Engr. Redwan Ferdous took a session on "Smart Life: Hands-On training on property automation design and commissioning through IoT" in collaboration with Dept. of CSE and BHTPA in Chittagong University of Engineering and Technology (CUET) back in 27th December-2021 Monday. In total 02 sessions, almost 120 students participated in the hands-on training. 1st session attended from 2pm-4:50pm and 2nd session attended from 5pm-6:50pm. All the participants were from L-3,T-2 of Dept. of CSE of CUET. In the session, different commercial IoT based home automation products were shown along with their controlling mechanism-practically. Also, different career and research opportunities were also discussed in the session.]]> Thu, 30 Dec 2021 03:13:05 GMT /RedwanFerdous/smart-life-hands-on-training-on-property-automation-design-and-commissioning-through-iot RedwanFerdous@slideshare.net(RedwanFerdous) Smart life: Hands on training on property automation design and commissioning through IoT RedwanFerdous Engr. Redwan Ferdous took a session on "Smart Life: Hands-On training on property automation design and commissioning through IoT" in collaboration with Dept. of CSE and BHTPA in Chittagong University of Engineering and Technology (CUET) back in 27th December-2021 Monday. In total 02 sessions, almost 120 students participated in the hands-on training. 1st session attended from 2pm-4:50pm and 2nd session attended from 5pm-6:50pm. All the participants were from L-3,T-2 of Dept. of CSE of CUET. In the session, different commercial IoT based home automation products were shown along with their controlling mechanism-practically. Also, different career and research opportunities were also discussed in the session. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/smartlifehands-ontrainingonpropertyautomationdesignandcommissioningthroughiot-211230031305-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> Engr. Redwan Ferdous took a session on &quot;Smart Life: Hands-On training on property automation design and commissioning through IoT&quot; in collaboration with Dept. of CSE and BHTPA in Chittagong University of Engineering and Technology (CUET) back in 27th December-2021 Monday. In total 02 sessions, almost 120 students participated in the hands-on training. 1st session attended from 2pm-4:50pm and 2nd session attended from 5pm-6:50pm. All the participants were from L-3,T-2 of Dept. of CSE of CUET. In the session, different commercial IoT based home automation products were shown along with their controlling mechanism-practically. Also, different career and research opportunities were also discussed in the session.
Smart life: Hands on training on property automation design and commissioning through IoT from Redwan Ferdous
]]> 161 0 https://cdn.slidesharecdn.com/ss_thumbnails/smartlifehands-ontrainingonpropertyautomationdesignandcommissioningthroughiot-211230031305-thumbnail.jpg?width=120&height=120&fit=bounds presentation Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0 Opportunities In Robotics for High School Students /slideshow/opportunities-in-robotics-for-high-school-students/250919231 opportunitiesinroboticsforhighschoolstudents-211230024319
In 28th December, 2021- Tuesday, 'MakerLab'- a subsidiary part of EMK Center, Bangladesh arranged a 1.5 hour webinar on "Opportunities In Robotics for High School Students", where the target audiences were High school and college level students. The main agenda of this session was to introduce young generation with different local (Bangladesh) and international competition based on robotics, rover challenge, idea competition on robotics. From hundred-thousands of competition, almost 10 famous competitions were discussed in details along with the way of preparing oneself for attending these mentioned competitions. Around 80 participants from different parts of the country joined. The session was held from 7:30pm-9pm and the medium was Zoom. in Q&A session in the end of the webinar- almost 20 different queries from the audiences were entertained. The session content preparation and was fully conducted by Mr. Redwan Ferdous with the moderation from EMK Center-Maker Lab. All or most of the contents are collected from internet search for non-commercial purpose.]]>
In 28th December, 2021- Tuesday, 'MakerLab'- a subsidiary part of EMK Center, Bangladesh arranged a 1.5 hour webinar on "Opportunities In Robotics for High School Students", where the target audiences were High school and college level students. The main agenda of this session was to introduce young generation with different local (Bangladesh) and international competition based on robotics, rover challenge, idea competition on robotics. From hundred-thousands of competition, almost 10 famous competitions were discussed in details along with the way of preparing oneself for attending these mentioned competitions. Around 80 participants from different parts of the country joined. The session was held from 7:30pm-9pm and the medium was Zoom. in Q&A session in the end of the webinar- almost 20 different queries from the audiences were entertained. The session content preparation and was fully conducted by Mr. Redwan Ferdous with the moderation from EMK Center-Maker Lab. All or most of the contents are collected from internet search for non-commercial purpose.]]> Thu, 30 Dec 2021 02:43:19 GMT /slideshow/opportunities-in-robotics-for-high-school-students/250919231 RedwanFerdous@slideshare.net(RedwanFerdous) Opportunities In Robotics for High School Students RedwanFerdous In 28th December, 2021- Tuesday, 'MakerLab'- a subsidiary part of EMK Center, Bangladesh arranged a 1.5 hour webinar on "Opportunities In Robotics for High School Students", where the target audiences were High school and college level students. The main agenda of this session was to introduce young generation with different local (Bangladesh) and international competition based on robotics, rover challenge, idea competition on robotics. From hundred-thousands of competition, almost 10 famous competitions were discussed in details along with the way of preparing oneself for attending these mentioned competitions. Around 80 participants from different parts of the country joined. The session was held from 7:30pm-9pm and the medium was Zoom. in Q&A session in the end of the webinar- almost 20 different queries from the audiences were entertained. The session content preparation and was fully conducted by Mr. Redwan Ferdous with the moderation from EMK Center-Maker Lab. All or most of the contents are collected from internet search for non-commercial purpose. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/opportunitiesinroboticsforhighschoolstudents-211230024319-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> In 28th December, 2021- Tuesday, &#39;MakerLab&#39;- a subsidiary part of EMK Center, Bangladesh arranged a 1.5 hour webinar on &quot;Opportunities In Robotics for High School Students&quot;, where the target audiences were High school and college level students. The main agenda of this session was to introduce young generation with different local (Bangladesh) and international competition based on robotics, rover challenge, idea competition on robotics. From hundred-thousands of competition, almost 10 famous competitions were discussed in details along with the way of preparing oneself for attending these mentioned competitions. Around 80 participants from different parts of the country joined. The session was held from 7:30pm-9pm and the medium was Zoom. in Q&amp;A session in the end of the webinar- almost 20 different queries from the audiences were entertained. The session content preparation and was fully conducted by Mr. Redwan Ferdous with the moderation from EMK Center-Maker Lab. All or most of the contents are collected from internet search for non-commercial purpose.
Opportunities In Robotics for High School Students from Redwan Ferdous
]]> 151 0 https://cdn.slidesharecdn.com/ss_thumbnails/opportunitiesinroboticsforhighschoolstudents-211230024319-thumbnail.jpg?width=120&height=120&fit=bounds presentation Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0 Cohort: 3 & 4- 2nd Phase Mentoring- 4th (final) Session: Road to 4IR /slideshow/2nd-phase-mentoring-4th-final-session-road-to-4ir-by-emk-center-cohort-3-4/250820241 4th-211211032803
An initiative, named 'Road to 4IR' was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male & 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 4th of total of 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-04, students were introduced with basic electronics and Raspberry Pi. Topics were: Current, Voltage, Diode, Capacitor, Inductor, etc. The program was held on 07th December, 2021. Both 3rd & 4th Cohort attended from 7:30 pm - 9:00 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center, Dhaka, Bangladesh.]]>
An initiative, named 'Road to 4IR' was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male & 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 4th of total of 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-04, students were introduced with basic electronics and Raspberry Pi. Topics were: Current, Voltage, Diode, Capacitor, Inductor, etc. The program was held on 07th December, 2021. Both 3rd & 4th Cohort attended from 7:30 pm - 9:00 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center, Dhaka, Bangladesh.]]> Sat, 11 Dec 2021 03:28:03 GMT /slideshow/2nd-phase-mentoring-4th-final-session-road-to-4ir-by-emk-center-cohort-3-4/250820241 RedwanFerdous@slideshare.net(RedwanFerdous) Cohort: 3 & 4- 2nd Phase Mentoring- 4th (final) Session: Road to 4IR RedwanFerdous An initiative, named 'Road to 4IR' was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male & 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 4th of total of 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-04, students were introduced with basic electronics and Raspberry Pi. Topics were: Current, Voltage, Diode, Capacitor, Inductor, etc. The program was held on 07th December, 2021. Both 3rd & 4th Cohort attended from 7:30 pm - 9:00 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center, Dhaka, Bangladesh. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/4th-211211032803-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> An initiative, named &#39;Road to 4IR&#39; was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male &amp; 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 4th of total of 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-04, students were introduced with basic electronics and Raspberry Pi. Topics were: Current, Voltage, Diode, Capacitor, Inductor, etc. The program was held on 07th December, 2021. Both 3rd &amp; 4th Cohort attended from 7:30 pm - 9:00 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center, Dhaka, Bangladesh.
Cohort: 3 & 4- 2nd Phase Mentoring- 4th (final) Session: Road to 4IR from Redwan Ferdous
]]> 150 0 https://cdn.slidesharecdn.com/ss_thumbnails/4th-211211032803-thumbnail.jpg?width=120&height=120&fit=bounds presentation Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0 Cohort: 3 & 4- 2nd Phase Mentoring- 3rd Session: Road to 4IR /slideshow/2nd-phase-mentoring-3rd-session-road-to-4ir-by-emk-center-cohort-3-4-250820207/250820207 3rd-211211031646
An initiative, named 'Road to 4IR' was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male & 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 3rd of total of 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-03, the students were introduced to basic electronics components including Arduino, Breadboard, Jumper Wires, Buzzer, LCD Display, Ultrasonic Sensor, IR Sensor, LM35 Temperature Sensor and other passive components. They were also trained on how to search for a datasheet of a specific components and search for relevant spec and characteristics. Also, in the session- they were taught how to start and complete making project/solution at the end of this session. Moreover, the students were introduced to 'Tinknercad'-where they can make project simulations, without buying the products physically. The 4th and last session of the 2nd phase will close the continuation of the 3rd session and after that, the team will be assigned with the mentors on different expertise. The program was held on 5th December, 2021- Sunday. 3rd & 4th Cohort students attended from 7:30 pm - 9:00 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center, Dhaka, Bangladesh.]]>
An initiative, named 'Road to 4IR' was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male & 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 3rd of total of 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-03, the students were introduced to basic electronics components including Arduino, Breadboard, Jumper Wires, Buzzer, LCD Display, Ultrasonic Sensor, IR Sensor, LM35 Temperature Sensor and other passive components. They were also trained on how to search for a datasheet of a specific components and search for relevant spec and characteristics. Also, in the session- they were taught how to start and complete making project/solution at the end of this session. Moreover, the students were introduced to 'Tinknercad'-where they can make project simulations, without buying the products physically. The 4th and last session of the 2nd phase will close the continuation of the 3rd session and after that, the team will be assigned with the mentors on different expertise. The program was held on 5th December, 2021- Sunday. 3rd & 4th Cohort students attended from 7:30 pm - 9:00 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center, Dhaka, Bangladesh.]]> Sat, 11 Dec 2021 03:16:45 GMT /slideshow/2nd-phase-mentoring-3rd-session-road-to-4ir-by-emk-center-cohort-3-4-250820207/250820207 RedwanFerdous@slideshare.net(RedwanFerdous) Cohort: 3 & 4- 2nd Phase Mentoring- 3rd Session: Road to 4IR RedwanFerdous An initiative, named 'Road to 4IR' was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male & 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 3rd of total of 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-03, the students were introduced to basic electronics components including Arduino, Breadboard, Jumper Wires, Buzzer, LCD Display, Ultrasonic Sensor, IR Sensor, LM35 Temperature Sensor and other passive components. They were also trained on how to search for a datasheet of a specific components and search for relevant spec and characteristics. Also, in the session- they were taught how to start and complete making project/solution at the end of this session. Moreover, the students were introduced to 'Tinknercad'-where they can make project simulations, without buying the products physically. The 4th and last session of the 2nd phase will close the continuation of the 3rd session and after that, the team will be assigned with the mentors on different expertise. The program was held on 5th December, 2021- Sunday. 3rd & 4th Cohort students attended from 7:30 pm - 9:00 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center, Dhaka, Bangladesh. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/3rd-211211031646-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> An initiative, named &#39;Road to 4IR&#39; was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male &amp; 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 3rd of total of 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-03, the students were introduced to basic electronics components including Arduino, Breadboard, Jumper Wires, Buzzer, LCD Display, Ultrasonic Sensor, IR Sensor, LM35 Temperature Sensor and other passive components. They were also trained on how to search for a datasheet of a specific components and search for relevant spec and characteristics. Also, in the session- they were taught how to start and complete making project/solution at the end of this session. Moreover, the students were introduced to &#39;Tinknercad&#39;-where they can make project simulations, without buying the products physically. The 4th and last session of the 2nd phase will close the continuation of the 3rd session and after that, the team will be assigned with the mentors on different expertise. The program was held on 5th December, 2021- Sunday. 3rd &amp; 4th Cohort students attended from 7:30 pm - 9:00 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center, Dhaka, Bangladesh.
Cohort: 3 & 4- 2nd Phase Mentoring- 3rd Session: Road to 4IR from Redwan Ferdous
]]> 137 0 https://cdn.slidesharecdn.com/ss_thumbnails/3rd-211211031646-thumbnail.jpg?width=120&height=120&fit=bounds presentation Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0 Cohort: 3 & 4- 2nd Phase Mentoring- 2nd Session: Road to 4IR /slideshow/2nd-phase-mentoring-2nd-session-road-to-4ir-by-emk-center-cohort-3-4/250804028 2nd-211208101220
An initiative, named 'Road to 4IR' was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male & 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 2nd of total of 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-02, the students were shared with the knowledge of methodical problem-solving steps, different themes, and subthemes of national and international competition, and sample problem ideas- from where the students will choose one to work with for next 4-5 weeks to make a tangible solution. The program was held on 4th December, 2021- Saturday. 3rd & 4th Cohort students attended from 7:30 pm - 9:00 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center, Dhaka, Bangladesh.]]>
An initiative, named 'Road to 4IR' was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male & 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 2nd of total of 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-02, the students were shared with the knowledge of methodical problem-solving steps, different themes, and subthemes of national and international competition, and sample problem ideas- from where the students will choose one to work with for next 4-5 weeks to make a tangible solution. The program was held on 4th December, 2021- Saturday. 3rd & 4th Cohort students attended from 7:30 pm - 9:00 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center, Dhaka, Bangladesh.]]> Wed, 08 Dec 2021 10:12:20 GMT /slideshow/2nd-phase-mentoring-2nd-session-road-to-4ir-by-emk-center-cohort-3-4/250804028 RedwanFerdous@slideshare.net(RedwanFerdous) Cohort: 3 & 4- 2nd Phase Mentoring- 2nd Session: Road to 4IR RedwanFerdous An initiative, named 'Road to 4IR' was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male & 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 2nd of total of 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-02, the students were shared with the knowledge of methodical problem-solving steps, different themes, and subthemes of national and international competition, and sample problem ideas- from where the students will choose one to work with for next 4-5 weeks to make a tangible solution. The program was held on 4th December, 2021- Saturday. 3rd & 4th Cohort students attended from 7:30 pm - 9:00 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center, Dhaka, Bangladesh. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/2nd-211208101220-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> An initiative, named &#39;Road to 4IR&#39; was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male &amp; 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 2nd of total of 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-02, the students were shared with the knowledge of methodical problem-solving steps, different themes, and subthemes of national and international competition, and sample problem ideas- from where the students will choose one to work with for next 4-5 weeks to make a tangible solution. The program was held on 4th December, 2021- Saturday. 3rd &amp; 4th Cohort students attended from 7:30 pm - 9:00 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center, Dhaka, Bangladesh.
Cohort: 3 & 4- 2nd Phase Mentoring- 2nd Session: Road to 4IR from Redwan Ferdous
]]> 93 0 https://cdn.slidesharecdn.com/ss_thumbnails/2nd-211208101220-thumbnail.jpg?width=120&height=120&fit=bounds presentation Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0 Cohort: 3 & 4- 2nd Phase Mentoring: Road to 4IR (1st Session) /slideshow/2nd-phase-mentoring-road-to-4ir-by-emk-center-cohort-3-4/250803942 1st-211208100325
An initiative was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male & 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 3rd & 4th of total 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-01, participants were introduced to different national and international competitions, where they can show their excellence of learning and knowledge (i.e.: BdRO, WRO, IROC, ACM-ICPC, BIG, a2i, CODE RACE, etc.) The program was held on 2nd December, 2021-Thursday. 3rd & 4th Cohort students attended from 7:30 pm - 9:00 pm. The session was taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center, Dhaka, Bangladesh]]>
An initiative was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male & 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 3rd & 4th of total 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-01, participants were introduced to different national and international competitions, where they can show their excellence of learning and knowledge (i.e.: BdRO, WRO, IROC, ACM-ICPC, BIG, a2i, CODE RACE, etc.) The program was held on 2nd December, 2021-Thursday. 3rd & 4th Cohort students attended from 7:30 pm - 9:00 pm. The session was taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center, Dhaka, Bangladesh]]> Wed, 08 Dec 2021 10:03:24 GMT /slideshow/2nd-phase-mentoring-road-to-4ir-by-emk-center-cohort-3-4/250803942 RedwanFerdous@slideshare.net(RedwanFerdous) Cohort: 3 & 4- 2nd Phase Mentoring: Road to 4IR (1st Session) RedwanFerdous An initiative was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male & 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 3rd & 4th of total 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-01, participants were introduced to different national and international competitions, where they can show their excellence of learning and knowledge (i.e.: BdRO, WRO, IROC, ACM-ICPC, BIG, a2i, CODE RACE, etc.) The program was held on 2nd December, 2021-Thursday. 3rd & 4th Cohort students attended from 7:30 pm - 9:00 pm. The session was taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center, Dhaka, Bangladesh <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/1st-211208100325-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> An initiative was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male &amp; 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 3rd &amp; 4th of total 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-01, participants were introduced to different national and international competitions, where they can show their excellence of learning and knowledge (i.e.: BdRO, WRO, IROC, ACM-ICPC, BIG, a2i, CODE RACE, etc.) The program was held on 2nd December, 2021-Thursday. 3rd &amp; 4th Cohort students attended from 7:30 pm - 9:00 pm. The session was taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center, Dhaka, Bangladesh
Cohort: 3 & 4- 2nd Phase Mentoring: Road to 4IR (1st Session) from Redwan Ferdous
]]> 78 0 https://cdn.slidesharecdn.com/ss_thumbnails/1st-211208100325-thumbnail.jpg?width=120&height=120&fit=bounds presentation Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0 Cohort: 1 & 2- 2nd Phase Mentoring- 4th (Final) Session: Road to 4IR /slideshow/2nd-phase-mentoring-4th-session-road-to-4ir-by-emk-center/250095232 presentation1-copy-210901130850
An initiative, named 'Road to 4IR' was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male & 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 4th & last of total of 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-04, students were introduced with basic electronics and Raspberry Pi. Topics were: Current, Voltage, Diode, Capacitor, Inductor, etc. The program was held on 29th August, 2021. Both 1st & 2nd Cohort attended from 7:15 pm - 9:30 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center. ]]>
An initiative, named 'Road to 4IR' was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male & 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 4th & last of total of 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-04, students were introduced with basic electronics and Raspberry Pi. Topics were: Current, Voltage, Diode, Capacitor, Inductor, etc. The program was held on 29th August, 2021. Both 1st & 2nd Cohort attended from 7:15 pm - 9:30 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center. ]]> Wed, 01 Sep 2021 13:08:50 GMT /slideshow/2nd-phase-mentoring-4th-session-road-to-4ir-by-emk-center/250095232 RedwanFerdous@slideshare.net(RedwanFerdous) Cohort: 1 & 2- 2nd Phase Mentoring- 4th (Final) Session: Road to 4IR RedwanFerdous An initiative, named 'Road to 4IR' was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male & 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 4th & last of total of 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-04, students were introduced with basic electronics and Raspberry Pi. Topics were: Current, Voltage, Diode, Capacitor, Inductor, etc. The program was held on 29th August, 2021. Both 1st & 2nd Cohort attended from 7:15 pm - 9:30 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/presentation1-copy-210901130850-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> An initiative, named &#39;Road to 4IR&#39; was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male &amp; 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 4th &amp; last of total of 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-04, students were introduced with basic electronics and Raspberry Pi. Topics were: Current, Voltage, Diode, Capacitor, Inductor, etc. The program was held on 29th August, 2021. Both 1st &amp; 2nd Cohort attended from 7:15 pm - 9:30 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center.
Cohort: 1 & 2- 2nd Phase Mentoring- 4th (Final) Session: Road to 4IR from Redwan Ferdous
]]> 114 0 https://cdn.slidesharecdn.com/ss_thumbnails/presentation1-copy-210901130850-thumbnail.jpg?width=120&height=120&fit=bounds presentation Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0 Cohort: 1 & 2- 2nd Phase Mentoring- 3rd Session: Road to 4IR /slideshow/2nd-phase-mentoring-3rd-session-road-to-4ir-by-emk-center/250043147 2ndphase-3rdsession24-aug-21-210825032026
An initiative, named 'Road to 4IR' was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male & 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 3rd of total of 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-03, the students were introduced to basic electronics components including Arduino, Breadboard, Jumper Wires, Buzzer, LCDD Display, Ultrasonic Sensor, IR Sensor, LM35 Temperature Sensor and other passive components. They were also trained on how to search for a datasheet of a specific components and search for relevant spec and characteristics. Also, in the session- they were taught how to start and complete making project/solution at the end of this session. Moreover, the students were introduced to 'Tinknercad'-where they can make project simulations, without buying the products physically. The 4th and last session of the 2nd phase will close the continuation of the 3rd session and after that, the team will be assigned with the mentors on different expertise. The program was held on 24th August, 2021. Both 1st & 2nd Cohort attended from 7:15 pm - 9:30 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center. ]]>
An initiative, named 'Road to 4IR' was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male & 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 3rd of total of 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-03, the students were introduced to basic electronics components including Arduino, Breadboard, Jumper Wires, Buzzer, LCDD Display, Ultrasonic Sensor, IR Sensor, LM35 Temperature Sensor and other passive components. They were also trained on how to search for a datasheet of a specific components and search for relevant spec and characteristics. Also, in the session- they were taught how to start and complete making project/solution at the end of this session. Moreover, the students were introduced to 'Tinknercad'-where they can make project simulations, without buying the products physically. The 4th and last session of the 2nd phase will close the continuation of the 3rd session and after that, the team will be assigned with the mentors on different expertise. The program was held on 24th August, 2021. Both 1st & 2nd Cohort attended from 7:15 pm - 9:30 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center. ]]> Wed, 25 Aug 2021 03:20:26 GMT /slideshow/2nd-phase-mentoring-3rd-session-road-to-4ir-by-emk-center/250043147 RedwanFerdous@slideshare.net(RedwanFerdous) Cohort: 1 & 2- 2nd Phase Mentoring- 3rd Session: Road to 4IR RedwanFerdous An initiative, named 'Road to 4IR' was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male & 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 3rd of total of 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-03, the students were introduced to basic electronics components including Arduino, Breadboard, Jumper Wires, Buzzer, LCDD Display, Ultrasonic Sensor, IR Sensor, LM35 Temperature Sensor and other passive components. They were also trained on how to search for a datasheet of a specific components and search for relevant spec and characteristics. Also, in the session- they were taught how to start and complete making project/solution at the end of this session. Moreover, the students were introduced to 'Tinknercad'-where they can make project simulations, without buying the products physically. The 4th and last session of the 2nd phase will close the continuation of the 3rd session and after that, the team will be assigned with the mentors on different expertise. The program was held on 24th August, 2021. Both 1st & 2nd Cohort attended from 7:15 pm - 9:30 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/2ndphase-3rdsession24-aug-21-210825032026-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> An initiative, named &#39;Road to 4IR&#39; was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male &amp; 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 3rd of total of 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-03, the students were introduced to basic electronics components including Arduino, Breadboard, Jumper Wires, Buzzer, LCDD Display, Ultrasonic Sensor, IR Sensor, LM35 Temperature Sensor and other passive components. They were also trained on how to search for a datasheet of a specific components and search for relevant spec and characteristics. Also, in the session- they were taught how to start and complete making project/solution at the end of this session. Moreover, the students were introduced to &#39;Tinknercad&#39;-where they can make project simulations, without buying the products physically. The 4th and last session of the 2nd phase will close the continuation of the 3rd session and after that, the team will be assigned with the mentors on different expertise. The program was held on 24th August, 2021. Both 1st &amp; 2nd Cohort attended from 7:15 pm - 9:30 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center.
Cohort: 1 & 2- 2nd Phase Mentoring- 3rd Session: Road to 4IR from Redwan Ferdous
]]> 150 0 https://cdn.slidesharecdn.com/ss_thumbnails/2ndphase-3rdsession24-aug-21-210825032026-thumbnail.jpg?width=120&height=120&fit=bounds presentation Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0 Cohort: 1 & 2- 2nd Phase Mentoring- 2nd Session: Road to 4IR /slideshow/2nd-phase-mentoring-2nd-session-road-to-4ir-by-emk-center/250009966 2ndphasementoring2ndsessioncohort-1218aug21final-210819112008
An initiative, named 'Road to 4IR' was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male & 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 2nd of total of 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-02, the students were shared with the knowledge of methodical problem-solving steps, different themes, and subthemes of national and international competition, and sample problem ideas- from where the students will choose one to work with for next 4-5 weeks to make a tangible solution. The program was held on 18th August, 2021. 1st Cohort attended from 7:15 pm - 8:30 pm and 2nd Cohort attended from 8:45 pm- 10:00 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center. ]]>
An initiative, named 'Road to 4IR' was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male & 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 2nd of total of 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-02, the students were shared with the knowledge of methodical problem-solving steps, different themes, and subthemes of national and international competition, and sample problem ideas- from where the students will choose one to work with for next 4-5 weeks to make a tangible solution. The program was held on 18th August, 2021. 1st Cohort attended from 7:15 pm - 8:30 pm and 2nd Cohort attended from 8:45 pm- 10:00 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center. ]]> Thu, 19 Aug 2021 11:20:07 GMT /slideshow/2nd-phase-mentoring-2nd-session-road-to-4ir-by-emk-center/250009966 RedwanFerdous@slideshare.net(RedwanFerdous) Cohort: 1 & 2- 2nd Phase Mentoring- 2nd Session: Road to 4IR RedwanFerdous An initiative, named 'Road to 4IR' was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male & 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 2nd of total of 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-02, the students were shared with the knowledge of methodical problem-solving steps, different themes, and subthemes of national and international competition, and sample problem ideas- from where the students will choose one to work with for next 4-5 weeks to make a tangible solution. The program was held on 18th August, 2021. 1st Cohort attended from 7:15 pm - 8:30 pm and 2nd Cohort attended from 8:45 pm- 10:00 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/2ndphasementoring2ndsessioncohort-1218aug21final-210819112008-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> An initiative, named &#39;Road to 4IR&#39; was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male &amp; 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 2nd of total of 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-02, the students were shared with the knowledge of methodical problem-solving steps, different themes, and subthemes of national and international competition, and sample problem ideas- from where the students will choose one to work with for next 4-5 weeks to make a tangible solution. The program was held on 18th August, 2021. 1st Cohort attended from 7:15 pm - 8:30 pm and 2nd Cohort attended from 8:45 pm- 10:00 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center.
Cohort: 1 & 2- 2nd Phase Mentoring- 2nd Session: Road to 4IR from Redwan Ferdous
]]> 136 0 https://cdn.slidesharecdn.com/ss_thumbnails/2ndphasementoring2ndsessioncohort-1218aug21final-210819112008-thumbnail.jpg?width=120&height=120&fit=bounds presentation Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0 Cohort: 1 & 2- 2nd Phase Mentoring: Road to 4IR (1st Session) /slideshow/2nd-phase-mentoring-road-to-4ir-by-emk-center/249950245 2ndphasementoring1stsessioncohort-1209aug21final-210810052133
An initiative was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male & 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 1st of total 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-01, participants were introduced to different national and international competitions, where they can show their excellence of learning and knowledge (i.e.: BdRO, WRO, IROC, ACM-ICPC, BIG, a2i, CODE RACE, etc.) The program was held on 9th August, 2021. 1st Cohort attended from 7:15 pm - 8:30 pm and 2nd Cohort attended from 8:45 pm- 10:00 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center.]]>
An initiative was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male & 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 1st of total 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-01, participants were introduced to different national and international competitions, where they can show their excellence of learning and knowledge (i.e.: BdRO, WRO, IROC, ACM-ICPC, BIG, a2i, CODE RACE, etc.) The program was held on 9th August, 2021. 1st Cohort attended from 7:15 pm - 8:30 pm and 2nd Cohort attended from 8:45 pm- 10:00 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center.]]> Tue, 10 Aug 2021 05:21:32 GMT /slideshow/2nd-phase-mentoring-road-to-4ir-by-emk-center/249950245 RedwanFerdous@slideshare.net(RedwanFerdous) Cohort: 1 & 2- 2nd Phase Mentoring: Road to 4IR (1st Session) RedwanFerdous An initiative was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male & 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 1st of total 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-01, participants were introduced to different national and international competitions, where they can show their excellence of learning and knowledge (i.e.: BdRO, WRO, IROC, ACM-ICPC, BIG, a2i, CODE RACE, etc.) The program was held on 9th August, 2021. 1st Cohort attended from 7:15 pm - 8:30 pm and 2nd Cohort attended from 8:45 pm- 10:00 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/2ndphasementoring1stsessioncohort-1209aug21final-210810052133-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> An initiative was taken by EMK Center -Maker Lab for training 30x4= 120 students (60 Male &amp; 60 Female) in 04 cohorts in the technology of the 4th Industrial Revolution. This session was the 1st of total 04 sessions- where the initially trained participants will be further trained under the supervision of expert mentors to materialize the training by planning, designing, and making a scientifically proven concept paper/ robot/solution. In this Session-01, participants were introduced to different national and international competitions, where they can show their excellence of learning and knowledge (i.e.: BdRO, WRO, IROC, ACM-ICPC, BIG, a2i, CODE RACE, etc.) The program was held on 9th August, 2021. 1st Cohort attended from 7:15 pm - 8:30 pm and 2nd Cohort attended from 8:45 pm- 10:00 pm. Both sessions were taken by Redwan Ferdous, Mentor of Embedded system of MakerLab, EMK Center.
Cohort: 1 & 2- 2nd Phase Mentoring: Road to 4IR (1st Session) from Redwan Ferdous
]]> 106 0 https://cdn.slidesharecdn.com/ss_thumbnails/2ndphasementoring1stsessioncohort-1209aug21final-210810052133-thumbnail.jpg?width=120&height=120&fit=bounds presentation Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0 Introduction to Digital Citizenship /slideshow/introduction-to-digital-citizenship-249622022/249622022 introductiontodigitalcitizen-210706094516
This deck was prepared for the 1st and 2nd cohort of the "Road to 4IR" program, initiated by EMK center in collation with 'Birshreshtha Munshi Abdur Rouf Public College'. The major attractions of both of the cohorts were, all the students/attendee of the program was from Class-07. 1st cohort was for all girls and 2nd cohort was for the all-boys batch. The session took place on 27th June, 2021. This 'Intro to Digital Citizenship' was the 2nd class of the program. In this class, the students were able to learn different terminologies and uses of digital technologies for ensuring appropriate cybersecurity and self-defense from cyber-bullying.]]>
This deck was prepared for the 1st and 2nd cohort of the "Road to 4IR" program, initiated by EMK center in collation with 'Birshreshtha Munshi Abdur Rouf Public College'. The major attractions of both of the cohorts were, all the students/attendee of the program was from Class-07. 1st cohort was for all girls and 2nd cohort was for the all-boys batch. The session took place on 27th June, 2021. This 'Intro to Digital Citizenship' was the 2nd class of the program. In this class, the students were able to learn different terminologies and uses of digital technologies for ensuring appropriate cybersecurity and self-defense from cyber-bullying.]]> Tue, 06 Jul 2021 09:45:15 GMT /slideshow/introduction-to-digital-citizenship-249622022/249622022 RedwanFerdous@slideshare.net(RedwanFerdous) Introduction to Digital Citizenship RedwanFerdous This deck was prepared for the 1st and 2nd cohort of the "Road to 4IR" program, initiated by EMK center in collation with 'Birshreshtha Munshi Abdur Rouf Public College'. The major attractions of both of the cohorts were, all the students/attendee of the program was from Class-07. 1st cohort was for all girls and 2nd cohort was for the all-boys batch. The session took place on 27th June, 2021. This 'Intro to Digital Citizenship' was the 2nd class of the program. In this class, the students were able to learn different terminologies and uses of digital technologies for ensuring appropriate cybersecurity and self-defense from cyber-bullying. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/introductiontodigitalcitizen-210706094516-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> This deck was prepared for the 1st and 2nd cohort of the &quot;Road to 4IR&quot; program, initiated by EMK center in collation with &#39;Birshreshtha Munshi Abdur Rouf Public College&#39;. The major attractions of both of the cohorts were, all the students/attendee of the program was from Class-07. 1st cohort was for all girls and 2nd cohort was for the all-boys batch. The session took place on 27th June, 2021. This &#39;Intro to Digital Citizenship&#39; was the 2nd class of the program. In this class, the students were able to learn different terminologies and uses of digital technologies for ensuring appropriate cybersecurity and self-defense from cyber-bullying.
Introduction to Digital Citizenship from Redwan Ferdous
]]> 75 0 https://cdn.slidesharecdn.com/ss_thumbnails/introductiontodigitalcitizen-210706094516-thumbnail.jpg?width=120&height=120&fit=bounds presentation Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0 Introduction to 4th Industrial Revolution /slideshow/introduction-to-4th-industrial-revolution/249621845 introductionto4iremk23may21-210706093852
This deck was prepared for the 1st and 2nd cohort of the "Road to 4IR" program, initiated by EMK center in collation with 'Birshreshtha Munshi Abdur Rouf Public College'. The major attractions of both of the cohorts were, all the students/attendee of the program was from Class-07. 1st cohort was for all girls (Date: 23rd May, 2021) and 2nd cohort was of the all-boys batch (Date: 24th June, 2021). This 'Introduction to 4th IR' was the first session of the program, where students were introduced to different topics and terminologies of 4IR.]]>
This deck was prepared for the 1st and 2nd cohort of the "Road to 4IR" program, initiated by EMK center in collation with 'Birshreshtha Munshi Abdur Rouf Public College'. The major attractions of both of the cohorts were, all the students/attendee of the program was from Class-07. 1st cohort was for all girls (Date: 23rd May, 2021) and 2nd cohort was of the all-boys batch (Date: 24th June, 2021). This 'Introduction to 4th IR' was the first session of the program, where students were introduced to different topics and terminologies of 4IR.]]> Tue, 06 Jul 2021 09:38:52 GMT /slideshow/introduction-to-4th-industrial-revolution/249621845 RedwanFerdous@slideshare.net(RedwanFerdous) Introduction to 4th Industrial Revolution RedwanFerdous This deck was prepared for the 1st and 2nd cohort of the "Road to 4IR" program, initiated by EMK center in collation with 'Birshreshtha Munshi Abdur Rouf Public College'. The major attractions of both of the cohorts were, all the students/attendee of the program was from Class-07. 1st cohort was for all girls (Date: 23rd May, 2021) and 2nd cohort was of the all-boys batch (Date: 24th June, 2021). This 'Introduction to 4th IR' was the first session of the program, where students were introduced to different topics and terminologies of 4IR. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/introductionto4iremk23may21-210706093852-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> This deck was prepared for the 1st and 2nd cohort of the &quot;Road to 4IR&quot; program, initiated by EMK center in collation with &#39;Birshreshtha Munshi Abdur Rouf Public College&#39;. The major attractions of both of the cohorts were, all the students/attendee of the program was from Class-07. 1st cohort was for all girls (Date: 23rd May, 2021) and 2nd cohort was of the all-boys batch (Date: 24th June, 2021). This &#39;Introduction to 4th IR&#39; was the first session of the program, where students were introduced to different topics and terminologies of 4IR.
Introduction to 4th Industrial Revolution from Redwan Ferdous
]]> 3558 0 https://cdn.slidesharecdn.com/ss_thumbnails/introductionto4iremk23may21-210706093852-thumbnail.jpg?width=120&height=120&fit=bounds presentation Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0 Career as Project Manager for Electrical Engineer_PUC_Redwan Ferdous /slideshow/career-as-project-manager-for-electrical-engineerpucredwan-ferdous/249383785 careeraspmforeepuc16-june-2021redwanferdous-210616153417
Premier University, Chittagong (Chattogram) arranged a webinar on "Career as Project Manager for Electrical Engineer" on 16th June, 2021 from 7:30 pm-9:15 pm. It was a Facebook live session, where the Dean of engineering faculty, Chairman of the EEE department, Assistant Professor of PUC, and other faculties were present. 100+ viewers were live on that session and 10+ questions were answered during the session. Redwan Ferdous was the keynote speaker of the session.]]>
Premier University, Chittagong (Chattogram) arranged a webinar on "Career as Project Manager for Electrical Engineer" on 16th June, 2021 from 7:30 pm-9:15 pm. It was a Facebook live session, where the Dean of engineering faculty, Chairman of the EEE department, Assistant Professor of PUC, and other faculties were present. 100+ viewers were live on that session and 10+ questions were answered during the session. Redwan Ferdous was the keynote speaker of the session.]]> Wed, 16 Jun 2021 15:34:17 GMT /slideshow/career-as-project-manager-for-electrical-engineerpucredwan-ferdous/249383785 RedwanFerdous@slideshare.net(RedwanFerdous) Career as Project Manager for Electrical Engineer_PUC_Redwan Ferdous RedwanFerdous Premier University, Chittagong (Chattogram) arranged a webinar on "Career as Project Manager for Electrical Engineer" on 16th June, 2021 from 7:30 pm-9:15 pm. It was a Facebook live session, where the Dean of engineering faculty, Chairman of the EEE department, Assistant Professor of PUC, and other faculties were present. 100+ viewers were live on that session and 10+ questions were answered during the session. Redwan Ferdous was the keynote speaker of the session. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/careeraspmforeepuc16-june-2021redwanferdous-210616153417-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> Premier University, Chittagong (Chattogram) arranged a webinar on &quot;Career as Project Manager for Electrical Engineer&quot; on 16th June, 2021 from 7:30 pm-9:15 pm. It was a Facebook live session, where the Dean of engineering faculty, Chairman of the EEE department, Assistant Professor of PUC, and other faculties were present. 100+ viewers were live on that session and 10+ questions were answered during the session. Redwan Ferdous was the keynote speaker of the session.
Career as Project Manager for Electrical Engineer_PUC_Redwan Ferdous from Redwan Ferdous
]]> 161 0 https://cdn.slidesharecdn.com/ss_thumbnails/careeraspmforeepuc16-june-2021redwanferdous-210616153417-thumbnail.jpg?width=120&height=120&fit=bounds presentation Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0 Fundamentals of Arduino: Day-02 /slideshow/fundamentals-of-arduino-day02/240840525 fundamentalsofarduinoday-0229-dec-2020-210102101755
Fundamentals of Arduino- is a 05 days consecutive program and training session and this slide is for the 2nd day of those 05 days. The session took place on 29th December 2020. This is very much designed for school and college-going students-who are interested in Arduino, Robotics, and other 4th Industrial Revolution-peripherals. In this session, Basic of Arduino Coding, Introduction to Proteus, Simulation using Proteus was discussed. The event was organized by EMK Center and the trainer was Mr. Redwan Ferdous. ]]>
Fundamentals of Arduino- is a 05 days consecutive program and training session and this slide is for the 2nd day of those 05 days. The session took place on 29th December 2020. This is very much designed for school and college-going students-who are interested in Arduino, Robotics, and other 4th Industrial Revolution-peripherals. In this session, Basic of Arduino Coding, Introduction to Proteus, Simulation using Proteus was discussed. The event was organized by EMK Center and the trainer was Mr. Redwan Ferdous. ]]> Sat, 02 Jan 2021 10:17:55 GMT /slideshow/fundamentals-of-arduino-day02/240840525 RedwanFerdous@slideshare.net(RedwanFerdous) Fundamentals of Arduino: Day-02 RedwanFerdous Fundamentals of Arduino- is a 05 days consecutive program and training session and this slide is for the 2nd day of those 05 days. The session took place on 29th December 2020. This is very much designed for school and college-going students-who are interested in Arduino, Robotics, and other 4th Industrial Revolution-peripherals. In this session, Basic of Arduino Coding, Introduction to Proteus, Simulation using Proteus was discussed. The event was organized by EMK Center and the trainer was Mr. Redwan Ferdous. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/fundamentalsofarduinoday-0229-dec-2020-210102101755-thumbnail.jpg?width=120&amp;height=120&amp;fit=bounds" /><br> Fundamentals of Arduino- is a 05 days consecutive program and training session and this slide is for the 2nd day of those 05 days. The session took place on 29th December 2020. This is very much designed for school and college-going students-who are interested in Arduino, Robotics, and other 4th Industrial Revolution-peripherals. In this session, Basic of Arduino Coding, Introduction to Proteus, Simulation using Proteus was discussed. The event was organized by EMK Center and the trainer was Mr. Redwan Ferdous.
Fundamentals of Arduino: Day-02 from Redwan Ferdous
]]> 147 0 https://cdn.slidesharecdn.com/ss_thumbnails/fundamentalsofarduinoday-0229-dec-2020-210102101755-thumbnail.jpg?width=120&height=120&fit=bounds presentation Black http://activitystrea.ms/schema/1.0/post http://activitystrea.ms/schema/1.0/posted 0 https://cdn.slidesharecdn.com/profile-photo-RedwanFerdous-48x48.jpg?cb=1729873714 Managing Director, FronTech Ltd| CEO, JRC Board | Project Manager | Electrical Engineer | MBA, M.Sc. | IoT| Industrial Robot| SMIEEE | www.redwanferdous.com https://cdn.slidesharecdn.com/ss_thumbnails/lecture-2basiccircuitsintrotoarduino2024edgejahangirnagaruniversity-240909201127-056ab9f4-thumbnail.jpg?width=320&height=320&fit=bounds slideshow/lecture-2_basic-circuits-intro-to-arduino_2024_edge_jahangirnagar-university-pdf/271680754 Lecture-2_Basic Circui... https://cdn.slidesharecdn.com/ss_thumbnails/lecture-1iotandroboticsskilldevelopmentprogram2024edgeju-240908122455-b4187d9c-thumbnail.jpg?width=320&height=320&fit=bounds slideshow/lecture-1_iot-and-robotics-skill-development-program_2024_edge_jahangirnagar-university/271647683 Lecture-1_IoT and Robo... https://cdn.slidesharecdn.com/ss_thumbnails/workshoponiotandbasichomeautomationbaiust16-17aug23-230823153710-97786da5-thumbnail.jpg?width=320&height=320&fit=bounds slideshow/workshop-on-iot-and-basic-home-automationbaiustpptx/260114223 Workshop on IoT and Ba...