�ݺ�ߣshows by User: pawankumar325

�ݺ�ߣshows by User: pawankumar325 / http://www.slideshare.net/images/logo.gif �ݺ�ߣshows by User: pawankumar325 / Wed, 20 Mar 2024 02:09:20 GMT �ݺ�ߣShare feed for �ݺ�ߣshows by User: pawankumar325 Isolated Iridium Sites on Potassium-Doped Carbon-nitride wrapped Tellurium Nanostructures for Enhanced Glycerol Photooxidation /slideshow/isolated-iridium-sites-on-potassiumdoped-carbonnitride-wrapped-tellurium-nanostructures-for-enhanced-glycerol-photooxidation-c40e/266876229 afmkumaretal2024-240320020920-8e67a00a
Many industrial processes such transesterification of fatty acid for biodiesel production, soap manufacturing and biosynthesis of ethanol generate glycerol as a major by-product that can be used to produce commodity chemicals. Photocatalytic transformation of glycerol is an enticing approach that can exclude the need of harsh oxidants and extraneous thermal energy. However, the product yield and selectivity remain poor due to low absorption and unsymmetrical site distribution on the catalyst surface. Herein, tellurium (Te) nanorods/nanosheets (TeNRs/NSs) wrapped potassium-doped carbon nitride (KCN) van der Waal (vdW) heterojunction (TeKCN) is designed to enhance charge separation and visible-NIR absorption. The iridium (Ir) single atom sites decoration on the TeKCN core-shell structure (TeKCNIr) promotes selective oxidation of glycerol to glyceraldehyde with a conversion of 45.6% and selectivity of 61.6% under AM1.5G irradiation. The catalytic selectivity can reach up to 88% under 450 nm monochromatic light. X-ray absorption spectroscopy (XAS) demonstrates the presence of undercoordinated IrN2O2 sites which improved catalytic selectivity for glycol oxidation. Band energies and computational calculations reveal faile charge transfer in the TeKCNIr heterostructure. EPR and scavenger tests discern that superoxide (O2•−) and hydroxyl (•OH) radicals are prime components driving glycerol oxidation.]]>
Many industrial processes such transesterification of fatty acid for biodiesel production, soap manufacturing and biosynthesis of ethanol generate glycerol as a major by-product that can be used to produce commodity chemicals. Photocatalytic transformation of glycerol is an enticing approach that can exclude the need of harsh oxidants and extraneous thermal energy. However, the product yield and selectivity remain poor due to low absorption and unsymmetrical site distribution on the catalyst surface. Herein, tellurium (Te) nanorods/nanosheets (TeNRs/NSs) wrapped potassium-doped carbon nitride (KCN) van der Waal (vdW) heterojunction (TeKCN) is designed to enhance charge separation and visible-NIR absorption. The iridium (Ir) single atom sites decoration on the TeKCN core-shell structure (TeKCNIr) promotes selective oxidation of glycerol to glyceraldehyde with a conversion of 45.6% and selectivity of 61.6% under AM1.5G irradiation. The catalytic selectivity can reach up to 88% under 450 nm monochromatic light. X-ray absorption spectroscopy (XAS) demonstrates the presence of undercoordinated IrN2O2 sites which improved catalytic selectivity for glycol oxidation. Band energies and computational calculations reveal faile charge transfer in the TeKCNIr heterostructure. EPR and scavenger tests discern that superoxide (O2•−) and hydroxyl (•OH) radicals are prime components driving glycerol oxidation.]]> Wed, 20 Mar 2024 02:09:20 GMT /slideshow/isolated-iridium-sites-on-potassiumdoped-carbonnitride-wrapped-tellurium-nanostructures-for-enhanced-glycerol-photooxidation-c40e/266876229 pawankumar325@slideshare.net(pawankumar325) Isolated Iridium Sites on Potassium-Doped Carbon-nitride wrapped Tellurium Nanostructures for Enhanced Glycerol Photooxidation pawankumar325 Many industrial processes such transesterification of fatty acid for biodiesel production, soap manufacturing and biosynthesis of ethanol generate glycerol as a major by-product that can be used to produce commodity chemicals. Photocatalytic transformation of glycerol is an enticing approach that can exclude the need of harsh oxidants and extraneous thermal energy. However, the product yield and selectivity remain poor due to low absorption and unsymmetrical site distribution on the catalyst surface. Herein, tellurium (Te) nanorods/nanosheets (TeNRs/NSs) wrapped potassium-doped carbon nitride (KCN) van der Waal (vdW) heterojunction (TeKCN) is designed to enhance charge separation and visible-NIR absorption. The iridium (Ir) single atom sites decoration on the TeKCN core-shell structure (TeKCNIr) promotes selective oxidation of glycerol to glyceraldehyde with a conversion of 45.6% and selectivity of 61.6% under AM1.5G irradiation. The catalytic selectivity can reach up to 88% under 450 nm monochromatic light. X-ray absorption spectroscopy (XAS) demonstrates the presence of undercoordinated IrN2O2 sites which improved catalytic selectivity for glycol oxidation. Band energies and computational calculations reveal faile charge transfer in the TeKCNIr heterostructure. EPR and scavenger tests discern that superoxide (O2•−) and hydroxyl (•OH) radicals are prime components driving glycerol oxidation. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/afmkumaretal2024-240320020920-8e67a00a-thumbnail.jpg?width=120&height=120&fit=bounds" /> Many industrial processes such transesterification of fatty acid for biodiesel production, soap manufacturing and biosynthesis of ethanol generate glycerol as a major by-product that can be used to produce commodity chemicals. Photocatalytic transformation of glycerol is an enticing approach that can exclude the need of harsh oxidants and extraneous thermal energy. However, the product yield and selectivity remain poor due to low absorption and unsymmetrical site distribution on the catalyst surface. Herein, tellurium (Te) nanorods/nanosheets (TeNRs/NSs) wrapped potassium-doped carbon nitride (KCN) van der Waal (vdW) heterojunction (TeKCN) is designed to enhance charge separation and visible-NIR absorption. The iridium (Ir) single atom sites decoration on the TeKCN core-shell structure (TeKCNIr) promotes selective oxidation of glycerol to glyceraldehyde with a conversion of 45.6% and selectivity of 61.6% under AM1.5G irradiation. The catalytic selectivity can reach up to 88% under 450 nm monochromatic light. X-ray absorption spectroscopy (XAS) demonstrates the presence of undercoordinated IrN2O2 sites which improved catalytic selectivity for glycol oxidation. Band energies and computational calculations reveal faile charge transfer in the TeKCNIr heterostructure. EPR and scavenger tests discern that superoxide (O2•−) and hydroxyl (•OH) radicals are prime components driving glycerol oxidation.

Isolated Iridium Sites on Potassium-Doped Carbon-nitride wrapped Tellurium Nanostructures for Enhanced Glycerol Photooxidation from Pawan Kumar

]]> 46 0 https://cdn.slidesharecdn.com/ss_thumbnails/afmkumaretal2024-240320020920-8e67a00a-thumbnail.jpg?width=120&height=120&fit=bounds presentation Black http://activitystrea.ms/schema/1.0/post

http://activitystrea.ms/schema/1.0/posted

0 Isolated Iridium Sites on Potassium-Doped Carbon-nitride wrapped Tellurium Nanostructures for Enhanced Glycerol Photooxidation /slideshow/isolated-iridium-sites-on-potassiumdoped-carbonnitride-wrapped-tellurium-nanostructures-for-enhanced-glycerol-photooxidation-5699/266868360 advfunctmaterials-2024-kumar-isolatediridiumsitesonpotassiumdopedcarbonnitridewrappedtellurium-240319144356-2529d9e0
Many industrial processes such transesterification of fatty acid for biodiesel production, soap manufacturing and biosynthesis of ethanol generate glycerol as a major by-product that can be used to produce commodity chemicals. Photocatalytic transformation of glycerol is an enticing approach that can exclude the need of harsh oxidants and extraneous thermal energy. However, the product yield and selectivity remain poor due to low absorption and unsymmetrical site distribution on the catalyst surface. Herein, tellurium (Te) nanorods/nanosheets (TeNRs/NSs) wrapped potassium-doped carbon nitride (KCN) van der Waal (vdW) heterojunction (TeKCN) is designed to enhance charge separation and visible-NIR absorption. The iridium (Ir) single atom sites decoration on the TeKCN core-shell structure (TeKCNIr) promotes selective oxidation of glycerol to glyceraldehyde with a conversion of 45.6% and selectivity of 61.6% under AM1.5G irradiation. The catalytic selectivity can reach up to 88% under 450 nm monochromatic light. X-ray absorption spectroscopy (XAS) demonstrates the presence of undercoordinated IrN2O2 sites which improved catalytic selectivity for glycol oxidation. Band energies and computational calculations reveal faile charge transfer in the TeKCNIr heterostructure. EPR and scavenger tests discern that superoxide (O2•−) and hydroxyl (•OH) radicals are prime components driving glycerol oxidation.]]>
Many industrial processes such transesterification of fatty acid for biodiesel production, soap manufacturing and biosynthesis of ethanol generate glycerol as a major by-product that can be used to produce commodity chemicals. Photocatalytic transformation of glycerol is an enticing approach that can exclude the need of harsh oxidants and extraneous thermal energy. However, the product yield and selectivity remain poor due to low absorption and unsymmetrical site distribution on the catalyst surface. Herein, tellurium (Te) nanorods/nanosheets (TeNRs/NSs) wrapped potassium-doped carbon nitride (KCN) van der Waal (vdW) heterojunction (TeKCN) is designed to enhance charge separation and visible-NIR absorption. The iridium (Ir) single atom sites decoration on the TeKCN core-shell structure (TeKCNIr) promotes selective oxidation of glycerol to glyceraldehyde with a conversion of 45.6% and selectivity of 61.6% under AM1.5G irradiation. The catalytic selectivity can reach up to 88% under 450 nm monochromatic light. X-ray absorption spectroscopy (XAS) demonstrates the presence of undercoordinated IrN2O2 sites which improved catalytic selectivity for glycol oxidation. Band energies and computational calculations reveal faile charge transfer in the TeKCNIr heterostructure. EPR and scavenger tests discern that superoxide (O2•−) and hydroxyl (•OH) radicals are prime components driving glycerol oxidation.]]> Tue, 19 Mar 2024 14:43:56 GMT /slideshow/isolated-iridium-sites-on-potassiumdoped-carbonnitride-wrapped-tellurium-nanostructures-for-enhanced-glycerol-photooxidation-5699/266868360 pawankumar325@slideshare.net(pawankumar325) Isolated Iridium Sites on Potassium-Doped Carbon-nitride wrapped Tellurium Nanostructures for Enhanced Glycerol Photooxidation pawankumar325 Many industrial processes such transesterification of fatty acid for biodiesel production, soap manufacturing and biosynthesis of ethanol generate glycerol as a major by-product that can be used to produce commodity chemicals. Photocatalytic transformation of glycerol is an enticing approach that can exclude the need of harsh oxidants and extraneous thermal energy. However, the product yield and selectivity remain poor due to low absorption and unsymmetrical site distribution on the catalyst surface. Herein, tellurium (Te) nanorods/nanosheets (TeNRs/NSs) wrapped potassium-doped carbon nitride (KCN) van der Waal (vdW) heterojunction (TeKCN) is designed to enhance charge separation and visible-NIR absorption. The iridium (Ir) single atom sites decoration on the TeKCN core-shell structure (TeKCNIr) promotes selective oxidation of glycerol to glyceraldehyde with a conversion of 45.6% and selectivity of 61.6% under AM1.5G irradiation. The catalytic selectivity can reach up to 88% under 450 nm monochromatic light. X-ray absorption spectroscopy (XAS) demonstrates the presence of undercoordinated IrN2O2 sites which improved catalytic selectivity for glycol oxidation. Band energies and computational calculations reveal faile charge transfer in the TeKCNIr heterostructure. EPR and scavenger tests discern that superoxide (O2•−) and hydroxyl (•OH) radicals are prime components driving glycerol oxidation. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/advfunctmaterials-2024-kumar-isolatediridiumsitesonpotassiumdopedcarbonnitridewrappedtellurium-240319144356-2529d9e0-thumbnail.jpg?width=120&height=120&fit=bounds" /> Many industrial processes such transesterification of fatty acid for biodiesel production, soap manufacturing and biosynthesis of ethanol generate glycerol as a major by-product that can be used to produce commodity chemicals. Photocatalytic transformation of glycerol is an enticing approach that can exclude the need of harsh oxidants and extraneous thermal energy. However, the product yield and selectivity remain poor due to low absorption and unsymmetrical site distribution on the catalyst surface. Herein, tellurium (Te) nanorods/nanosheets (TeNRs/NSs) wrapped potassium-doped carbon nitride (KCN) van der Waal (vdW) heterojunction (TeKCN) is designed to enhance charge separation and visible-NIR absorption. The iridium (Ir) single atom sites decoration on the TeKCN core-shell structure (TeKCNIr) promotes selective oxidation of glycerol to glyceraldehyde with a conversion of 45.6% and selectivity of 61.6% under AM1.5G irradiation. The catalytic selectivity can reach up to 88% under 450 nm monochromatic light. X-ray absorption spectroscopy (XAS) demonstrates the presence of undercoordinated IrN2O2 sites which improved catalytic selectivity for glycol oxidation. Band energies and computational calculations reveal faile charge transfer in the TeKCNIr heterostructure. EPR and scavenger tests discern that superoxide (O2•−) and hydroxyl (•OH) radicals are prime components driving glycerol oxidation.

Isolated Iridium Sites on Potassium-Doped Carbon-nitride wrapped Tellurium Nanostructures for Enhanced Glycerol Photooxidation from Pawan Kumar

]]> 25 0 https://cdn.slidesharecdn.com/ss_thumbnails/advfunctmaterials-2024-kumar-isolatediridiumsitesonpotassiumdopedcarbonnitridewrappedtellurium-240319144356-2529d9e0-thumbnail.jpg?width=120&height=120&fit=bounds document Black http://activitystrea.ms/schema/1.0/post

http://activitystrea.ms/schema/1.0/posted

0 Isolated Iridium Sites on Potassium-Doped Carbon-nitride wrapped Tellurium Nanostructures for Enhanced Glycerol Photooxidation /slideshow/isolated-iridium-sites-on-potassiumdoped-carbonnitride-wrapped-tellurium-nanostructures-for-enhanced-glycerol-photooxidation/266868339 adfm202313793-sup-0001-suppmat-240319144249-284757dd
Many industrial processes such transesterification of fatty acid for biodiesel production, soap manufacturing and biosynthesis of ethanol generate glycerol as a major by-product that can be used to produce commodity chemicals. Photocatalytic transformation of glycerol is an enticing approach that can exclude the need of harsh oxidants and extraneous thermal energy. However, the product yield and selectivity remain poor due to low absorption and unsymmetrical site distribution on the catalyst surface. Herein, tellurium (Te) nanorods/nanosheets (TeNRs/NSs) wrapped potassium-doped carbon nitride (KCN) van der Waal (vdW) heterojunction (TeKCN) is designed to enhance charge separation and visible-NIR absorption. The iridium (Ir) single atom sites decoration on the TeKCN core-shell structure (TeKCNIr) promotes selective oxidation of glycerol to glyceraldehyde with a conversion of 45.6% and selectivity of 61.6% under AM1.5G irradiation. The catalytic selectivity can reach up to 88% under 450 nm monochromatic light. X-ray absorption spectroscopy (XAS) demonstrates the presence of undercoordinated IrN2O2 sites which improved catalytic selectivity for glycol oxidation. Band energies and computational calculations reveal faile charge transfer in the TeKCNIr heterostructure. EPR and scavenger tests discern that superoxide (O2•−) and hydroxyl (•OH) radicals are prime components driving glycerol oxidation.]]>
Many industrial processes such transesterification of fatty acid for biodiesel production, soap manufacturing and biosynthesis of ethanol generate glycerol as a major by-product that can be used to produce commodity chemicals. Photocatalytic transformation of glycerol is an enticing approach that can exclude the need of harsh oxidants and extraneous thermal energy. However, the product yield and selectivity remain poor due to low absorption and unsymmetrical site distribution on the catalyst surface. Herein, tellurium (Te) nanorods/nanosheets (TeNRs/NSs) wrapped potassium-doped carbon nitride (KCN) van der Waal (vdW) heterojunction (TeKCN) is designed to enhance charge separation and visible-NIR absorption. The iridium (Ir) single atom sites decoration on the TeKCN core-shell structure (TeKCNIr) promotes selective oxidation of glycerol to glyceraldehyde with a conversion of 45.6% and selectivity of 61.6% under AM1.5G irradiation. The catalytic selectivity can reach up to 88% under 450 nm monochromatic light. X-ray absorption spectroscopy (XAS) demonstrates the presence of undercoordinated IrN2O2 sites which improved catalytic selectivity for glycol oxidation. Band energies and computational calculations reveal faile charge transfer in the TeKCNIr heterostructure. EPR and scavenger tests discern that superoxide (O2•−) and hydroxyl (•OH) radicals are prime components driving glycerol oxidation.]]> Tue, 19 Mar 2024 14:42:49 GMT /slideshow/isolated-iridium-sites-on-potassiumdoped-carbonnitride-wrapped-tellurium-nanostructures-for-enhanced-glycerol-photooxidation/266868339 pawankumar325@slideshare.net(pawankumar325) Isolated Iridium Sites on Potassium-Doped Carbon-nitride wrapped Tellurium Nanostructures for Enhanced Glycerol Photooxidation pawankumar325 Many industrial processes such transesterification of fatty acid for biodiesel production, soap manufacturing and biosynthesis of ethanol generate glycerol as a major by-product that can be used to produce commodity chemicals. Photocatalytic transformation of glycerol is an enticing approach that can exclude the need of harsh oxidants and extraneous thermal energy. However, the product yield and selectivity remain poor due to low absorption and unsymmetrical site distribution on the catalyst surface. Herein, tellurium (Te) nanorods/nanosheets (TeNRs/NSs) wrapped potassium-doped carbon nitride (KCN) van der Waal (vdW) heterojunction (TeKCN) is designed to enhance charge separation and visible-NIR absorption. The iridium (Ir) single atom sites decoration on the TeKCN core-shell structure (TeKCNIr) promotes selective oxidation of glycerol to glyceraldehyde with a conversion of 45.6% and selectivity of 61.6% under AM1.5G irradiation. The catalytic selectivity can reach up to 88% under 450 nm monochromatic light. X-ray absorption spectroscopy (XAS) demonstrates the presence of undercoordinated IrN2O2 sites which improved catalytic selectivity for glycol oxidation. Band energies and computational calculations reveal faile charge transfer in the TeKCNIr heterostructure. EPR and scavenger tests discern that superoxide (O2•−) and hydroxyl (•OH) radicals are prime components driving glycerol oxidation. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/adfm202313793-sup-0001-suppmat-240319144249-284757dd-thumbnail.jpg?width=120&height=120&fit=bounds" /> Many industrial processes such transesterification of fatty acid for biodiesel production, soap manufacturing and biosynthesis of ethanol generate glycerol as a major by-product that can be used to produce commodity chemicals. Photocatalytic transformation of glycerol is an enticing approach that can exclude the need of harsh oxidants and extraneous thermal energy. However, the product yield and selectivity remain poor due to low absorption and unsymmetrical site distribution on the catalyst surface. Herein, tellurium (Te) nanorods/nanosheets (TeNRs/NSs) wrapped potassium-doped carbon nitride (KCN) van der Waal (vdW) heterojunction (TeKCN) is designed to enhance charge separation and visible-NIR absorption. The iridium (Ir) single atom sites decoration on the TeKCN core-shell structure (TeKCNIr) promotes selective oxidation of glycerol to glyceraldehyde with a conversion of 45.6% and selectivity of 61.6% under AM1.5G irradiation. The catalytic selectivity can reach up to 88% under 450 nm monochromatic light. X-ray absorption spectroscopy (XAS) demonstrates the presence of undercoordinated IrN2O2 sites which improved catalytic selectivity for glycol oxidation. Band energies and computational calculations reveal faile charge transfer in the TeKCNIr heterostructure. EPR and scavenger tests discern that superoxide (O2•−) and hydroxyl (•OH) radicals are prime components driving glycerol oxidation.

Isolated Iridium Sites on Potassium-Doped Carbon-nitride wrapped Tellurium Nanostructures for Enhanced Glycerol Photooxidation from Pawan Kumar

]]> 26 0 https://cdn.slidesharecdn.com/ss_thumbnails/adfm202313793-sup-0001-suppmat-240319144249-284757dd-thumbnail.jpg?width=120&height=120&fit=bounds document Black http://activitystrea.ms/schema/1.0/post

http://activitystrea.ms/schema/1.0/posted

0 Solar-Driven Cellulose Photorefining into Arabinose over Oxygen-Doped Carbon Nitride /slideshow/solardriven-cellulose-photorefining-into-arabinose-over-oxygendoped-carbon-nitride-97b9/266346454 cs3c06046si001-240217021830-bf7c74fc
Biomass photorefining is a promising strategy to address the energy crisis and transition toward carbon carbon-neutral society. Here, we demonstrate the feasibility of direct cellulose photorefining into arabinose by a rationally designed oxygen-doped polymeric carbon nitride, which generates favorable oxidative species (e.g., O2–, •OH) for selective oxidative reactions at neutral conditions. In addition, we also illustrate the mechanism of the photocatalytic cellulose to arabinose conversion by density functional theory calculations. The oxygen insertion derived from oxidative radicals at the C1 position of glucose within cellulose leads to oxidative cleavage of β-1,4 glycosidic linkages, resulting in the subsequent gluconic acid formation. The following decarboxylation process of gluconic acid via C1–C2 α-scissions, triggered by surface oxygen-doped active sites, generates arabinose and formic acid, respectively. This work not only offers a mechanistic understanding of cellulose photorefining to arabinose but also sets up an example for illuminating the path toward direct cellulose photorefining into value-added bioproducts under mild conditions.]]>
Biomass photorefining is a promising strategy to address the energy crisis and transition toward carbon carbon-neutral society. Here, we demonstrate the feasibility of direct cellulose photorefining into arabinose by a rationally designed oxygen-doped polymeric carbon nitride, which generates favorable oxidative species (e.g., O2–, •OH) for selective oxidative reactions at neutral conditions. In addition, we also illustrate the mechanism of the photocatalytic cellulose to arabinose conversion by density functional theory calculations. The oxygen insertion derived from oxidative radicals at the C1 position of glucose within cellulose leads to oxidative cleavage of β-1,4 glycosidic linkages, resulting in the subsequent gluconic acid formation. The following decarboxylation process of gluconic acid via C1–C2 α-scissions, triggered by surface oxygen-doped active sites, generates arabinose and formic acid, respectively. This work not only offers a mechanistic understanding of cellulose photorefining to arabinose but also sets up an example for illuminating the path toward direct cellulose photorefining into value-added bioproducts under mild conditions.]]> Sat, 17 Feb 2024 02:18:30 GMT /slideshow/solardriven-cellulose-photorefining-into-arabinose-over-oxygendoped-carbon-nitride-97b9/266346454 pawankumar325@slideshare.net(pawankumar325) Solar-Driven Cellulose Photorefining into Arabinose over Oxygen-Doped Carbon Nitride pawankumar325 Biomass photorefining is a promising strategy to address the energy crisis and transition toward carbon carbon-neutral society. Here, we demonstrate the feasibility of direct cellulose photorefining into arabinose by a rationally designed oxygen-doped polymeric carbon nitride, which generates favorable oxidative species (e.g., O2–, •OH) for selective oxidative reactions at neutral conditions. In addition, we also illustrate the mechanism of the photocatalytic cellulose to arabinose conversion by density functional theory calculations. The oxygen insertion derived from oxidative radicals at the C1 position of glucose within cellulose leads to oxidative cleavage of β-1,4 glycosidic linkages, resulting in the subsequent gluconic acid formation. The following decarboxylation process of gluconic acid via C1–C2 α-scissions, triggered by surface oxygen-doped active sites, generates arabinose and formic acid, respectively. This work not only offers a mechanistic understanding of cellulose photorefining to arabinose but also sets up an example for illuminating the path toward direct cellulose photorefining into value-added bioproducts under mild conditions. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/cs3c06046si001-240217021830-bf7c74fc-thumbnail.jpg?width=120&height=120&fit=bounds" /> Biomass photorefining is a promising strategy to address the energy crisis and transition toward carbon carbon-neutral society. Here, we demonstrate the feasibility of direct cellulose photorefining into arabinose by a rationally designed oxygen-doped polymeric carbon nitride, which generates favorable oxidative species (e.g., O2–, •OH) for selective oxidative reactions at neutral conditions. In addition, we also illustrate the mechanism of the photocatalytic cellulose to arabinose conversion by density functional theory calculations. The oxygen insertion derived from oxidative radicals at the C1 position of glucose within cellulose leads to oxidative cleavage of β-1,4 glycosidic linkages, resulting in the subsequent gluconic acid formation. The following decarboxylation process of gluconic acid via C1–C2 α-scissions, triggered by surface oxygen-doped active sites, generates arabinose and formic acid, respectively. This work not only offers a mechanistic understanding of cellulose photorefining to arabinose but also sets up an example for illuminating the path toward direct cellulose photorefining into value-added bioproducts under mild conditions.

Solar-Driven Cellulose Photorefining into Arabinose over Oxygen-Doped Carbon Nitride from Pawan Kumar

]]> 5 0 https://cdn.slidesharecdn.com/ss_thumbnails/cs3c06046si001-240217021830-bf7c74fc-thumbnail.jpg?width=120&height=120&fit=bounds document Black http://activitystrea.ms/schema/1.0/post

http://activitystrea.ms/schema/1.0/posted

0 Solar-Driven Cellulose Photorefining into Arabinose over Oxygen-Doped Carbon Nitride /slideshow/solardriven-cellulose-photorefining-into-arabinose-over-oxygendoped-carbon-nitride-eef9/266346430 wang-et-al-2024-solar-driven-cellulose-photorefining-into-arabinose-over-oxygen-doped-carbon-nitride-240217021708-a4c6c1d4
Biomass photorefining is a promising strategy to address the energy crisis and transition toward carbon carbon-neutral society. Here, we demonstrate the feasibility of direct cellulose photorefining into arabinose by a rationally designed oxygen-doped polymeric carbon nitride, which generates favorable oxidative species (e.g., O2–, •OH) for selective oxidative reactions at neutral conditions. In addition, we also illustrate the mechanism of the photocatalytic cellulose to arabinose conversion by density functional theory calculations. The oxygen insertion derived from oxidative radicals at the C1 position of glucose within cellulose leads to oxidative cleavage of β-1,4 glycosidic linkages, resulting in the subsequent gluconic acid formation. The following decarboxylation process of gluconic acid via C1–C2 α-scissions, triggered by surface oxygen-doped active sites, generates arabinose and formic acid, respectively. This work not only offers a mechanistic understanding of cellulose photorefining to arabinose but also sets up an example for illuminating the path toward direct cellulose photorefining into value-added bioproducts under mild conditions.]]>
Biomass photorefining is a promising strategy to address the energy crisis and transition toward carbon carbon-neutral society. Here, we demonstrate the feasibility of direct cellulose photorefining into arabinose by a rationally designed oxygen-doped polymeric carbon nitride, which generates favorable oxidative species (e.g., O2–, •OH) for selective oxidative reactions at neutral conditions. In addition, we also illustrate the mechanism of the photocatalytic cellulose to arabinose conversion by density functional theory calculations. The oxygen insertion derived from oxidative radicals at the C1 position of glucose within cellulose leads to oxidative cleavage of β-1,4 glycosidic linkages, resulting in the subsequent gluconic acid formation. The following decarboxylation process of gluconic acid via C1–C2 α-scissions, triggered by surface oxygen-doped active sites, generates arabinose and formic acid, respectively. This work not only offers a mechanistic understanding of cellulose photorefining to arabinose but also sets up an example for illuminating the path toward direct cellulose photorefining into value-added bioproducts under mild conditions.]]> Sat, 17 Feb 2024 02:17:08 GMT /slideshow/solardriven-cellulose-photorefining-into-arabinose-over-oxygendoped-carbon-nitride-eef9/266346430 pawankumar325@slideshare.net(pawankumar325) Solar-Driven Cellulose Photorefining into Arabinose over Oxygen-Doped Carbon Nitride pawankumar325 Biomass photorefining is a promising strategy to address the energy crisis and transition toward carbon carbon-neutral society. Here, we demonstrate the feasibility of direct cellulose photorefining into arabinose by a rationally designed oxygen-doped polymeric carbon nitride, which generates favorable oxidative species (e.g., O2–, •OH) for selective oxidative reactions at neutral conditions. In addition, we also illustrate the mechanism of the photocatalytic cellulose to arabinose conversion by density functional theory calculations. The oxygen insertion derived from oxidative radicals at the C1 position of glucose within cellulose leads to oxidative cleavage of β-1,4 glycosidic linkages, resulting in the subsequent gluconic acid formation. The following decarboxylation process of gluconic acid via C1–C2 α-scissions, triggered by surface oxygen-doped active sites, generates arabinose and formic acid, respectively. This work not only offers a mechanistic understanding of cellulose photorefining to arabinose but also sets up an example for illuminating the path toward direct cellulose photorefining into value-added bioproducts under mild conditions. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/wang-et-al-2024-solar-driven-cellulose-photorefining-into-arabinose-over-oxygen-doped-carbon-nitride-240217021708-a4c6c1d4-thumbnail.jpg?width=120&height=120&fit=bounds" /> Biomass photorefining is a promising strategy to address the energy crisis and transition toward carbon carbon-neutral society. Here, we demonstrate the feasibility of direct cellulose photorefining into arabinose by a rationally designed oxygen-doped polymeric carbon nitride, which generates favorable oxidative species (e.g., O2–, •OH) for selective oxidative reactions at neutral conditions. In addition, we also illustrate the mechanism of the photocatalytic cellulose to arabinose conversion by density functional theory calculations. The oxygen insertion derived from oxidative radicals at the C1 position of glucose within cellulose leads to oxidative cleavage of β-1,4 glycosidic linkages, resulting in the subsequent gluconic acid formation. The following decarboxylation process of gluconic acid via C1–C2 α-scissions, triggered by surface oxygen-doped active sites, generates arabinose and formic acid, respectively. This work not only offers a mechanistic understanding of cellulose photorefining to arabinose but also sets up an example for illuminating the path toward direct cellulose photorefining into value-added bioproducts under mild conditions.

Solar-Driven Cellulose Photorefining into Arabinose over Oxygen-Doped Carbon Nitride from Pawan Kumar

]]> 20 0 https://cdn.slidesharecdn.com/ss_thumbnails/wang-et-al-2024-solar-driven-cellulose-photorefining-into-arabinose-over-oxygen-doped-carbon-nitride-240217021708-a4c6c1d4-thumbnail.jpg?width=120&height=120&fit=bounds document Black http://activitystrea.ms/schema/1.0/post

http://activitystrea.ms/schema/1.0/posted

0 Solar-Driven Cellulose Photorefining into Arabinose over Oxygen-Doped Carbon Nitride /slideshow/solardriven-cellulose-photorefining-into-arabinose-over-oxygendoped-carbon-nitride/266346340 acscatal-240217020957-9991f983
Biomass photorefining is a promising strategy to address the energy crisis and transition toward carbon carbon-neutral society. Here, we demonstrate the feasibility of direct cellulose photorefining into arabinose by a rationally designed oxygen-doped polymeric carbon nitride, which generates favorable oxidative species (e.g., O2–, •OH) for selective oxidative reactions at neutral conditions. In addition, we also illustrate the mechanism of the photocatalytic cellulose to arabinose conversion by density functional theory calculations. The oxygen insertion derived from oxidative radicals at the C1 position of glucose within cellulose leads to oxidative cleavage of β-1,4 glycosidic linkages, resulting in the subsequent gluconic acid formation. The following decarboxylation process of gluconic acid via C1–C2 α-scissions, triggered by surface oxygen-doped active sites, generates arabinose and formic acid, respectively. This work not only offers a mechanistic understanding of cellulose photorefining to arabinose but also sets up an example for illuminating the path toward direct cellulose photorefining into value-added bioproducts under mild conditions.]]>
Biomass photorefining is a promising strategy to address the energy crisis and transition toward carbon carbon-neutral society. Here, we demonstrate the feasibility of direct cellulose photorefining into arabinose by a rationally designed oxygen-doped polymeric carbon nitride, which generates favorable oxidative species (e.g., O2–, •OH) for selective oxidative reactions at neutral conditions. In addition, we also illustrate the mechanism of the photocatalytic cellulose to arabinose conversion by density functional theory calculations. The oxygen insertion derived from oxidative radicals at the C1 position of glucose within cellulose leads to oxidative cleavage of β-1,4 glycosidic linkages, resulting in the subsequent gluconic acid formation. The following decarboxylation process of gluconic acid via C1–C2 α-scissions, triggered by surface oxygen-doped active sites, generates arabinose and formic acid, respectively. This work not only offers a mechanistic understanding of cellulose photorefining to arabinose but also sets up an example for illuminating the path toward direct cellulose photorefining into value-added bioproducts under mild conditions.]]> Sat, 17 Feb 2024 02:09:57 GMT /slideshow/solardriven-cellulose-photorefining-into-arabinose-over-oxygendoped-carbon-nitride/266346340 pawankumar325@slideshare.net(pawankumar325) Solar-Driven Cellulose Photorefining into Arabinose over Oxygen-Doped Carbon Nitride pawankumar325 Biomass photorefining is a promising strategy to address the energy crisis and transition toward carbon carbon-neutral society. Here, we demonstrate the feasibility of direct cellulose photorefining into arabinose by a rationally designed oxygen-doped polymeric carbon nitride, which generates favorable oxidative species (e.g., O2–, •OH) for selective oxidative reactions at neutral conditions. In addition, we also illustrate the mechanism of the photocatalytic cellulose to arabinose conversion by density functional theory calculations. The oxygen insertion derived from oxidative radicals at the C1 position of glucose within cellulose leads to oxidative cleavage of β-1,4 glycosidic linkages, resulting in the subsequent gluconic acid formation. The following decarboxylation process of gluconic acid via C1–C2 α-scissions, triggered by surface oxygen-doped active sites, generates arabinose and formic acid, respectively. This work not only offers a mechanistic understanding of cellulose photorefining to arabinose but also sets up an example for illuminating the path toward direct cellulose photorefining into value-added bioproducts under mild conditions. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/acscatal-240217020957-9991f983-thumbnail.jpg?width=120&height=120&fit=bounds" /> Biomass photorefining is a promising strategy to address the energy crisis and transition toward carbon carbon-neutral society. Here, we demonstrate the feasibility of direct cellulose photorefining into arabinose by a rationally designed oxygen-doped polymeric carbon nitride, which generates favorable oxidative species (e.g., O2–, •OH) for selective oxidative reactions at neutral conditions. In addition, we also illustrate the mechanism of the photocatalytic cellulose to arabinose conversion by density functional theory calculations. The oxygen insertion derived from oxidative radicals at the C1 position of glucose within cellulose leads to oxidative cleavage of β-1,4 glycosidic linkages, resulting in the subsequent gluconic acid formation. The following decarboxylation process of gluconic acid via C1–C2 α-scissions, triggered by surface oxygen-doped active sites, generates arabinose and formic acid, respectively. This work not only offers a mechanistic understanding of cellulose photorefining to arabinose but also sets up an example for illuminating the path toward direct cellulose photorefining into value-added bioproducts under mild conditions.

Solar-Driven Cellulose Photorefining into Arabinose over Oxygen-Doped Carbon Nitride from Pawan Kumar

]]> 6 0 https://cdn.slidesharecdn.com/ss_thumbnails/acscatal-240217020957-9991f983-thumbnail.jpg?width=120&height=120&fit=bounds presentation Black http://activitystrea.ms/schema/1.0/post

http://activitystrea.ms/schema/1.0/posted

0 Partial Thermal Condensation Mediated Synthesis of High-Density Nickel Single Atom Sites on Carbon Nitride for Selective Photooxidation of Methane into Methanol /slideshow/partial-thermal-condensation-mediated-synthesis-of-highdensity-nickel-single-atom-sites-on-carbon-nitride-for-selective-photooxidation-of-methane-into-methanol-8833/264987740 smll202304574-sup-0001-suppmat-231228195436-8a4d0702
Direct selective transformation of greenhouse methane (CH4) to liquid oxygenates (methanol) can substitute energy-intensive two-step (reforming/Fischer–Tropsch) synthesis while creating environmental benefits. The development of inexpensive, selective, and robust catalysts that enable room temperature conversion will decide the future of this technology. Single-atom catalysts (SACs) with isolated active centers embedded in support have displayed significant promises in catalysis to drive challenging reactions. Herein, high-density Ni single atoms are developed and stabilized on carbon nitride (NiCN) via thermal condensation of preorganized Ni-coordinated melem units. The physicochemical characterization of NiCN with various analytical techniques including HAADF-STEM and X-ray absorption fine structure (XAFS) validate the successful formation of Ni single atoms coordinated to the heptazine-constituted CN network. The presence of uniform catalytic sites improved visible absorption and carrier separation in densely populated NiCN SAC resulting in 100% selective photoconversion of (CH4) to methanol using H2O2 as an oxidant. The superior catalytic activity can be attributed to the generation of high oxidation (NiIII═O) sites and selective C─H bond cleavage to generate •CH3 radicals on Ni centers, which can combine with •OH radicals to generate CH3OH.]]>
Direct selective transformation of greenhouse methane (CH4) to liquid oxygenates (methanol) can substitute energy-intensive two-step (reforming/Fischer–Tropsch) synthesis while creating environmental benefits. The development of inexpensive, selective, and robust catalysts that enable room temperature conversion will decide the future of this technology. Single-atom catalysts (SACs) with isolated active centers embedded in support have displayed significant promises in catalysis to drive challenging reactions. Herein, high-density Ni single atoms are developed and stabilized on carbon nitride (NiCN) via thermal condensation of preorganized Ni-coordinated melem units. The physicochemical characterization of NiCN with various analytical techniques including HAADF-STEM and X-ray absorption fine structure (XAFS) validate the successful formation of Ni single atoms coordinated to the heptazine-constituted CN network. The presence of uniform catalytic sites improved visible absorption and carrier separation in densely populated NiCN SAC resulting in 100% selective photoconversion of (CH4) to methanol using H2O2 as an oxidant. The superior catalytic activity can be attributed to the generation of high oxidation (NiIII═O) sites and selective C─H bond cleavage to generate •CH3 radicals on Ni centers, which can combine with •OH radicals to generate CH3OH.]]> Thu, 28 Dec 2023 19:54:36 GMT /slideshow/partial-thermal-condensation-mediated-synthesis-of-highdensity-nickel-single-atom-sites-on-carbon-nitride-for-selective-photooxidation-of-methane-into-methanol-8833/264987740 pawankumar325@slideshare.net(pawankumar325) Partial Thermal Condensation Mediated Synthesis of High-Density Nickel Single Atom Sites on Carbon Nitride for Selective Photooxidation of Methane into Methanol pawankumar325 Direct selective transformation of greenhouse methane (CH4) to liquid oxygenates (methanol) can substitute energy-intensive two-step (reforming/Fischer–Tropsch) synthesis while creating environmental benefits. The development of inexpensive, selective, and robust catalysts that enable room temperature conversion will decide the future of this technology. Single-atom catalysts (SACs) with isolated active centers embedded in support have displayed significant promises in catalysis to drive challenging reactions. Herein, high-density Ni single atoms are developed and stabilized on carbon nitride (NiCN) via thermal condensation of preorganized Ni-coordinated melem units. The physicochemical characterization of NiCN with various analytical techniques including HAADF-STEM and X-ray absorption fine structure (XAFS) validate the successful formation of Ni single atoms coordinated to the heptazine-constituted CN network. The presence of uniform catalytic sites improved visible absorption and carrier separation in densely populated NiCN SAC resulting in 100% selective photoconversion of (CH4) to methanol using H2O2 as an oxidant. The superior catalytic activity can be attributed to the generation of high oxidation (NiIII═O) sites and selective C─H bond cleavage to generate •CH3 radicals on Ni centers, which can combine with •OH radicals to generate CH3OH. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/smll202304574-sup-0001-suppmat-231228195436-8a4d0702-thumbnail.jpg?width=120&height=120&fit=bounds" /> Direct selective transformation of greenhouse methane (CH4) to liquid oxygenates (methanol) can substitute energy-intensive two-step (reforming/Fischer–Tropsch) synthesis while creating environmental benefits. The development of inexpensive, selective, and robust catalysts that enable room temperature conversion will decide the future of this technology. Single-atom catalysts (SACs) with isolated active centers embedded in support have displayed significant promises in catalysis to drive challenging reactions. Herein, high-density Ni single atoms are developed and stabilized on carbon nitride (NiCN) via thermal condensation of preorganized Ni-coordinated melem units. The physicochemical characterization of NiCN with various analytical techniques including HAADF-STEM and X-ray absorption fine structure (XAFS) validate the successful formation of Ni single atoms coordinated to the heptazine-constituted CN network. The presence of uniform catalytic sites improved visible absorption and carrier separation in densely populated NiCN SAC resulting in 100% selective photoconversion of (CH4) to methanol using H2O2 as an oxidant. The superior catalytic activity can be attributed to the generation of high oxidation (NiIII═O) sites and selective C─H bond cleavage to generate •CH3 radicals on Ni centers, which can combine with •OH radicals to generate CH3OH.

Partial Thermal Condensation Mediated Synthesis of High-Density Nickel Single Atom Sites on Carbon Nitride for Selective Photooxidation of Methane into Methanol from Pawan Kumar

]]> 7 0 https://cdn.slidesharecdn.com/ss_thumbnails/smll202304574-sup-0001-suppmat-231228195436-8a4d0702-thumbnail.jpg?width=120&height=120&fit=bounds document Black http://activitystrea.ms/schema/1.0/post

http://activitystrea.ms/schema/1.0/posted

0 Partial Thermal Condensation Mediated Synthesis of High-Density Nickel Single Atom Sites on Carbon Nitride for Selective Photooxidation of Methane into Methanol /slideshow/partial-thermal-condensation-mediated-synthesis-of-highdensity-nickel-single-atom-sites-on-carbon-nitride-for-selective-photooxidation-of-methane-into-methanol-c932/264987730 partialthermalcondensationmediatedsynthesisofhigh-densitynickelsingleatomsitesoncarbonnitrideforsele-231228195336-ccf7de50
Direct selective transformation of greenhouse methane (CH4) to liquid oxygenates (methanol) can substitute energy-intensive two-step (reforming/Fischer–Tropsch) synthesis while creating environmental benefits. The development of inexpensive, selective, and robust catalysts that enable room temperature conversion will decide the future of this technology. Single-atom catalysts (SACs) with isolated active centers embedded in support have displayed significant promises in catalysis to drive challenging reactions. Herein, high-density Ni single atoms are developed and stabilized on carbon nitride (NiCN) via thermal condensation of preorganized Ni-coordinated melem units. The physicochemical characterization of NiCN with various analytical techniques including HAADF-STEM and X-ray absorption fine structure (XAFS) validate the successful formation of Ni single atoms coordinated to the heptazine-constituted CN network. The presence of uniform catalytic sites improved visible absorption and carrier separation in densely populated NiCN SAC resulting in 100% selective photoconversion of (CH4) to methanol using H2O2 as an oxidant. The superior catalytic activity can be attributed to the generation of high oxidation (NiIII═O) sites and selective C─H bond cleavage to generate •CH3 radicals on Ni centers, which can combine with •OH radicals to generate CH3OH.]]>
Direct selective transformation of greenhouse methane (CH4) to liquid oxygenates (methanol) can substitute energy-intensive two-step (reforming/Fischer–Tropsch) synthesis while creating environmental benefits. The development of inexpensive, selective, and robust catalysts that enable room temperature conversion will decide the future of this technology. Single-atom catalysts (SACs) with isolated active centers embedded in support have displayed significant promises in catalysis to drive challenging reactions. Herein, high-density Ni single atoms are developed and stabilized on carbon nitride (NiCN) via thermal condensation of preorganized Ni-coordinated melem units. The physicochemical characterization of NiCN with various analytical techniques including HAADF-STEM and X-ray absorption fine structure (XAFS) validate the successful formation of Ni single atoms coordinated to the heptazine-constituted CN network. The presence of uniform catalytic sites improved visible absorption and carrier separation in densely populated NiCN SAC resulting in 100% selective photoconversion of (CH4) to methanol using H2O2 as an oxidant. The superior catalytic activity can be attributed to the generation of high oxidation (NiIII═O) sites and selective C─H bond cleavage to generate •CH3 radicals on Ni centers, which can combine with •OH radicals to generate CH3OH.]]> Thu, 28 Dec 2023 19:53:36 GMT /slideshow/partial-thermal-condensation-mediated-synthesis-of-highdensity-nickel-single-atom-sites-on-carbon-nitride-for-selective-photooxidation-of-methane-into-methanol-c932/264987730 pawankumar325@slideshare.net(pawankumar325) Partial Thermal Condensation Mediated Synthesis of High-Density Nickel Single Atom Sites on Carbon Nitride for Selective Photooxidation of Methane into Methanol pawankumar325 Direct selective transformation of greenhouse methane (CH4) to liquid oxygenates (methanol) can substitute energy-intensive two-step (reforming/Fischer–Tropsch) synthesis while creating environmental benefits. The development of inexpensive, selective, and robust catalysts that enable room temperature conversion will decide the future of this technology. Single-atom catalysts (SACs) with isolated active centers embedded in support have displayed significant promises in catalysis to drive challenging reactions. Herein, high-density Ni single atoms are developed and stabilized on carbon nitride (NiCN) via thermal condensation of preorganized Ni-coordinated melem units. The physicochemical characterization of NiCN with various analytical techniques including HAADF-STEM and X-ray absorption fine structure (XAFS) validate the successful formation of Ni single atoms coordinated to the heptazine-constituted CN network. The presence of uniform catalytic sites improved visible absorption and carrier separation in densely populated NiCN SAC resulting in 100% selective photoconversion of (CH4) to methanol using H2O2 as an oxidant. The superior catalytic activity can be attributed to the generation of high oxidation (NiIII═O) sites and selective C─H bond cleavage to generate •CH3 radicals on Ni centers, which can combine with •OH radicals to generate CH3OH. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/partialthermalcondensationmediatedsynthesisofhigh-densitynickelsingleatomsitesoncarbonnitrideforsele-231228195336-ccf7de50-thumbnail.jpg?width=120&height=120&fit=bounds" /> Direct selective transformation of greenhouse methane (CH4) to liquid oxygenates (methanol) can substitute energy-intensive two-step (reforming/Fischer–Tropsch) synthesis while creating environmental benefits. The development of inexpensive, selective, and robust catalysts that enable room temperature conversion will decide the future of this technology. Single-atom catalysts (SACs) with isolated active centers embedded in support have displayed significant promises in catalysis to drive challenging reactions. Herein, high-density Ni single atoms are developed and stabilized on carbon nitride (NiCN) via thermal condensation of preorganized Ni-coordinated melem units. The physicochemical characterization of NiCN with various analytical techniques including HAADF-STEM and X-ray absorption fine structure (XAFS) validate the successful formation of Ni single atoms coordinated to the heptazine-constituted CN network. The presence of uniform catalytic sites improved visible absorption and carrier separation in densely populated NiCN SAC resulting in 100% selective photoconversion of (CH4) to methanol using H2O2 as an oxidant. The superior catalytic activity can be attributed to the generation of high oxidation (NiIII═O) sites and selective C─H bond cleavage to generate •CH3 radicals on Ni centers, which can combine with •OH radicals to generate CH3OH.

Partial Thermal Condensation Mediated Synthesis of High-Density Nickel Single Atom Sites on Carbon Nitride for Selective Photooxidation of Methane into Methanol from Pawan Kumar

]]> 28 0 https://cdn.slidesharecdn.com/ss_thumbnails/partialthermalcondensationmediatedsynthesisofhigh-densitynickelsingleatomsitesoncarbonnitrideforsele-231228195336-ccf7de50-thumbnail.jpg?width=120&height=120&fit=bounds presentation Black http://activitystrea.ms/schema/1.0/post

http://activitystrea.ms/schema/1.0/posted

0 Selective Cellobiose Photoreforming for Simultaneous Gluconic Acid and Syngas Production in Acidic Conditions /slideshow/selective-cellobiose-photoreforming-for-simultaneous-gluconic-acid-and-syngas-production-in-acidic-conditions-9795/264987381 1-s2-231228190305-41abca26
Here, we demonstrate the selective cellobiose (building block of cellulose) photoreforming for gluconic acid and syngas co-production in acidic conditions by rationally designing a bifunctional polymeric carbon nitride (CN) with potassium/sulfur co-dopant. This heteroatomic doped CN photocatalyst possesses enhanced visible light absorption, higher charge separation efficiency than pristine CN. Under acidic conditions, cellobiose is not only more efficiently hydrolyzed into glucose but also promotes the syngas and gluconic acid production. Density functional theory (DFT) calculations reveal the favorable generation of •O2− during the photocatalytic reaction, which is essential for gluconic acid production. Consequently, the fine-designed photocatalyst presents excellent cellobiose conversion (>80%) and gluconic acid selectivity (>70%) together with the co-production of syngas (~56 μmol g-1 h-1) under light illumination. The current work demonstrates the feasibility of biomass photoreforming with value-added chemicals and syngas co-production under mild condition.]]>
Here, we demonstrate the selective cellobiose (building block of cellulose) photoreforming for gluconic acid and syngas co-production in acidic conditions by rationally designing a bifunctional polymeric carbon nitride (CN) with potassium/sulfur co-dopant. This heteroatomic doped CN photocatalyst possesses enhanced visible light absorption, higher charge separation efficiency than pristine CN. Under acidic conditions, cellobiose is not only more efficiently hydrolyzed into glucose but also promotes the syngas and gluconic acid production. Density functional theory (DFT) calculations reveal the favorable generation of •O2− during the photocatalytic reaction, which is essential for gluconic acid production. Consequently, the fine-designed photocatalyst presents excellent cellobiose conversion (>80%) and gluconic acid selectivity (>70%) together with the co-production of syngas (~56 μmol g-1 h-1) under light illumination. The current work demonstrates the feasibility of biomass photoreforming with value-added chemicals and syngas co-production under mild condition.]]> Thu, 28 Dec 2023 19:03:05 GMT /slideshow/selective-cellobiose-photoreforming-for-simultaneous-gluconic-acid-and-syngas-production-in-acidic-conditions-9795/264987381 pawankumar325@slideshare.net(pawankumar325) Selective Cellobiose Photoreforming for Simultaneous Gluconic Acid and Syngas Production in Acidic Conditions pawankumar325 Here, we demonstrate the selective cellobiose (building block of cellulose) photoreforming for gluconic acid and syngas co-production in acidic conditions by rationally designing a bifunctional polymeric carbon nitride (CN) with potassium/sulfur co-dopant. This heteroatomic doped CN photocatalyst possesses enhanced visible light absorption, higher charge separation efficiency than pristine CN. Under acidic conditions, cellobiose is not only more efficiently hydrolyzed into glucose but also promotes the syngas and gluconic acid production. Density functional theory (DFT) calculations reveal the favorable generation of •O2− during the photocatalytic reaction, which is essential for gluconic acid production. Consequently, the fine-designed photocatalyst presents excellent cellobiose conversion (>80%) and gluconic acid selectivity (>70%) together with the co-production of syngas (~56 μmol g-1 h-1) under light illumination. The current work demonstrates the feasibility of biomass photoreforming with value-added chemicals and syngas co-production under mild condition. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/1-s2-231228190305-41abca26-thumbnail.jpg?width=120&height=120&fit=bounds" /> Here, we demonstrate the selective cellobiose (building block of cellulose) photoreforming for gluconic acid and syngas co-production in acidic conditions by rationally designing a bifunctional polymeric carbon nitride (CN) with potassium/sulfur co-dopant. This heteroatomic doped CN photocatalyst possesses enhanced visible light absorption, higher charge separation efficiency than pristine CN. Under acidic conditions, cellobiose is not only more efficiently hydrolyzed into glucose but also promotes the syngas and gluconic acid production. Density functional theory (DFT) calculations reveal the favorable generation of •O2− during the photocatalytic reaction, which is essential for gluconic acid production. Consequently, the fine-designed photocatalyst presents excellent cellobiose conversion (>80%) and gluconic acid selectivity (>70%) together with the co-production of syngas (~56 μmol g-1 h-1) under light illumination. The current work demonstrates the feasibility of biomass photoreforming with value-added chemicals and syngas co-production under mild condition.

Selective Cellobiose Photoreforming for Simultaneous Gluconic Acid and Syngas Production in Acidic Conditions from Pawan Kumar

]]> 13 0 https://cdn.slidesharecdn.com/ss_thumbnails/1-s2-231228190305-41abca26-thumbnail.jpg?width=120&height=120&fit=bounds document Black http://activitystrea.ms/schema/1.0/post

http://activitystrea.ms/schema/1.0/posted

0 Selective Cellobiose Photoreforming for Simultaneous Gluconic Acid and Syngas Production in Acidic Conditions /slideshow/selective-cellobiose-photoreforming-for-simultaneous-gluconic-acid-and-syngas-production-in-acidic-conditions-ea99/264987364 selectivecellobiosephotoreformingforsimultaneousgluconicacidandsyngasproductioninacidicconditions-231228190026-09c9d9e4
Here, we demonstrate the selective cellobiose (building block of cellulose) photoreforming for gluconic acid and syngas co-production in acidic conditions by rationally designing a bifunctional polymeric carbon nitride (CN) with potassium/sulfur co-dopant. This heteroatomic doped CN photocatalyst possesses enhanced visible light absorption, higher charge separation efficiency than pristine CN. Under acidic conditions, cellobiose is not only more efficiently hydrolyzed into glucose but also promotes the syngas and gluconic acid production. Density functional theory (DFT) calculations reveal the favorable generation of •O2− during the photocatalytic reaction, which is essential for gluconic acid production. Consequently, the fine-designed photocatalyst presents excellent cellobiose conversion (>80%) and gluconic acid selectivity (>70%) together with the co-production of syngas (~56 μmol g-1 h-1) under light illumination. The current work demonstrates the feasibility of biomass photoreforming with value-added chemicals and syngas co-production under mild condition.]]>
Here, we demonstrate the selective cellobiose (building block of cellulose) photoreforming for gluconic acid and syngas co-production in acidic conditions by rationally designing a bifunctional polymeric carbon nitride (CN) with potassium/sulfur co-dopant. This heteroatomic doped CN photocatalyst possesses enhanced visible light absorption, higher charge separation efficiency than pristine CN. Under acidic conditions, cellobiose is not only more efficiently hydrolyzed into glucose but also promotes the syngas and gluconic acid production. Density functional theory (DFT) calculations reveal the favorable generation of •O2− during the photocatalytic reaction, which is essential for gluconic acid production. Consequently, the fine-designed photocatalyst presents excellent cellobiose conversion (>80%) and gluconic acid selectivity (>70%) together with the co-production of syngas (~56 μmol g-1 h-1) under light illumination. The current work demonstrates the feasibility of biomass photoreforming with value-added chemicals and syngas co-production under mild condition.]]> Thu, 28 Dec 2023 19:00:26 GMT /slideshow/selective-cellobiose-photoreforming-for-simultaneous-gluconic-acid-and-syngas-production-in-acidic-conditions-ea99/264987364 pawankumar325@slideshare.net(pawankumar325) Selective Cellobiose Photoreforming for Simultaneous Gluconic Acid and Syngas Production in Acidic Conditions pawankumar325 Here, we demonstrate the selective cellobiose (building block of cellulose) photoreforming for gluconic acid and syngas co-production in acidic conditions by rationally designing a bifunctional polymeric carbon nitride (CN) with potassium/sulfur co-dopant. This heteroatomic doped CN photocatalyst possesses enhanced visible light absorption, higher charge separation efficiency than pristine CN. Under acidic conditions, cellobiose is not only more efficiently hydrolyzed into glucose but also promotes the syngas and gluconic acid production. Density functional theory (DFT) calculations reveal the favorable generation of •O2− during the photocatalytic reaction, which is essential for gluconic acid production. Consequently, the fine-designed photocatalyst presents excellent cellobiose conversion (>80%) and gluconic acid selectivity (>70%) together with the co-production of syngas (~56 μmol g-1 h-1) under light illumination. The current work demonstrates the feasibility of biomass photoreforming with value-added chemicals and syngas co-production under mild condition. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/selectivecellobiosephotoreformingforsimultaneousgluconicacidandsyngasproductioninacidicconditions-231228190026-09c9d9e4-thumbnail.jpg?width=120&height=120&fit=bounds" /> Here, we demonstrate the selective cellobiose (building block of cellulose) photoreforming for gluconic acid and syngas co-production in acidic conditions by rationally designing a bifunctional polymeric carbon nitride (CN) with potassium/sulfur co-dopant. This heteroatomic doped CN photocatalyst possesses enhanced visible light absorption, higher charge separation efficiency than pristine CN. Under acidic conditions, cellobiose is not only more efficiently hydrolyzed into glucose but also promotes the syngas and gluconic acid production. Density functional theory (DFT) calculations reveal the favorable generation of •O2− during the photocatalytic reaction, which is essential for gluconic acid production. Consequently, the fine-designed photocatalyst presents excellent cellobiose conversion (>80%) and gluconic acid selectivity (>70%) together with the co-production of syngas (~56 μmol g-1 h-1) under light illumination. The current work demonstrates the feasibility of biomass photoreforming with value-added chemicals and syngas co-production under mild condition.

Selective Cellobiose Photoreforming for Simultaneous Gluconic Acid and Syngas Production in Acidic Conditions from Pawan Kumar

]]> 20 0 https://cdn.slidesharecdn.com/ss_thumbnails/selectivecellobiosephotoreformingforsimultaneousgluconicacidandsyngasproductioninacidicconditions-231228190026-09c9d9e4-thumbnail.jpg?width=120&height=120&fit=bounds presentation Black http://activitystrea.ms/schema/1.0/post

http://activitystrea.ms/schema/1.0/posted

0 Selective Cellobiose Photoreforming for Simultaneous Gluconic Acid and Syngas Production in Acidic Conditions /slideshow/selective-cellobiose-photoreforming-for-simultaneous-gluconic-acid-and-syngas-production-in-acidic-conditions/264985571 1-s2-231228164350-5ff33013
Here, we demonstrate the selective cellobiose (building block of cellulose) photoreforming for gluconic acid and syngas co-production in acidic conditions by rationally designing a bifunctional polymeric carbon nitride (CN) with potassium/sulfur co-dopant. This heteroatomic doped CN photocatalyst possesses enhanced visible light absorption, higher charge separation efficiency than pristine CN. Under acidic conditions, cellobiose is not only more efficiently hydrolyzed into glucose but also promotes the syngas and gluconic acid production. Density functional theory (DFT) calculations reveal the favorable generation of •O2− during the photocatalytic reaction, which is essential for gluconic acid production. Consequently, the fine-designed photocatalyst presents excellent cellobiose conversion (>80%) and gluconic acid selectivity (>70%) together with the co-production of syngas (~56 μmol g-1 h-1) under light illumination. The current work demonstrates the feasibility of biomass photoreforming with value-added chemicals and syngas co-production under mild condition.]]>
Here, we demonstrate the selective cellobiose (building block of cellulose) photoreforming for gluconic acid and syngas co-production in acidic conditions by rationally designing a bifunctional polymeric carbon nitride (CN) with potassium/sulfur co-dopant. This heteroatomic doped CN photocatalyst possesses enhanced visible light absorption, higher charge separation efficiency than pristine CN. Under acidic conditions, cellobiose is not only more efficiently hydrolyzed into glucose but also promotes the syngas and gluconic acid production. Density functional theory (DFT) calculations reveal the favorable generation of •O2− during the photocatalytic reaction, which is essential for gluconic acid production. Consequently, the fine-designed photocatalyst presents excellent cellobiose conversion (>80%) and gluconic acid selectivity (>70%) together with the co-production of syngas (~56 μmol g-1 h-1) under light illumination. The current work demonstrates the feasibility of biomass photoreforming with value-added chemicals and syngas co-production under mild condition.]]> Thu, 28 Dec 2023 16:43:50 GMT /slideshow/selective-cellobiose-photoreforming-for-simultaneous-gluconic-acid-and-syngas-production-in-acidic-conditions/264985571 pawankumar325@slideshare.net(pawankumar325) Selective Cellobiose Photoreforming for Simultaneous Gluconic Acid and Syngas Production in Acidic Conditions pawankumar325 Here, we demonstrate the selective cellobiose (building block of cellulose) photoreforming for gluconic acid and syngas co-production in acidic conditions by rationally designing a bifunctional polymeric carbon nitride (CN) with potassium/sulfur co-dopant. This heteroatomic doped CN photocatalyst possesses enhanced visible light absorption, higher charge separation efficiency than pristine CN. Under acidic conditions, cellobiose is not only more efficiently hydrolyzed into glucose but also promotes the syngas and gluconic acid production. Density functional theory (DFT) calculations reveal the favorable generation of •O2− during the photocatalytic reaction, which is essential for gluconic acid production. Consequently, the fine-designed photocatalyst presents excellent cellobiose conversion (>80%) and gluconic acid selectivity (>70%) together with the co-production of syngas (~56 μmol g-1 h-1) under light illumination. The current work demonstrates the feasibility of biomass photoreforming with value-added chemicals and syngas co-production under mild condition. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/1-s2-231228164350-5ff33013-thumbnail.jpg?width=120&height=120&fit=bounds" /> Here, we demonstrate the selective cellobiose (building block of cellulose) photoreforming for gluconic acid and syngas co-production in acidic conditions by rationally designing a bifunctional polymeric carbon nitride (CN) with potassium/sulfur co-dopant. This heteroatomic doped CN photocatalyst possesses enhanced visible light absorption, higher charge separation efficiency than pristine CN. Under acidic conditions, cellobiose is not only more efficiently hydrolyzed into glucose but also promotes the syngas and gluconic acid production. Density functional theory (DFT) calculations reveal the favorable generation of •O2− during the photocatalytic reaction, which is essential for gluconic acid production. Consequently, the fine-designed photocatalyst presents excellent cellobiose conversion (>80%) and gluconic acid selectivity (>70%) together with the co-production of syngas (~56 μmol g-1 h-1) under light illumination. The current work demonstrates the feasibility of biomass photoreforming with value-added chemicals and syngas co-production under mild condition.

Selective Cellobiose Photoreforming for Simultaneous Gluconic Acid and Syngas Production in Acidic Conditions from Pawan Kumar

]]> 19 0 https://cdn.slidesharecdn.com/ss_thumbnails/1-s2-231228164350-5ff33013-thumbnail.jpg?width=120&height=120&fit=bounds document Black http://activitystrea.ms/schema/1.0/post

http://activitystrea.ms/schema/1.0/posted

0 Partial Thermal Condensation Mediated Synthesis of High-Density Nickel Single Atom Sites on Carbon Nitride for Selective Photooxidation of Methane into Methanol /slideshow/partial-thermal-condensation-mediated-synthesis-of-highdensity-nickel-single-atom-sites-on-carbon-nitride-for-selective-photooxidation-of-methane-into-methanol/263997634 small-2023-kumar-partialthermalcondensationmediatedsynthesisofhighdensitynickelsingleatomsitesoncarb-231128021706-e90713c3
Direct selective transformation of greenhouse methane (CH4) to liquid oxygenates (methanol) can substitute energy-intensive two-step (reforming/Fischer–Tropsch) synthesis while creating environmental benefits. The development of inexpensive, selective, and robust catalysts that enable room temperature conversion will decide the future of this technology. Single-atom catalysts (SACs) with isolated active centers embedded in support have displayed significant promises in catalysis to drive challenging reactions. Herein, high-density Ni single atoms are developed and stabilized on carbon nitride (NiCN) via thermal condensation of preorganized Ni-coordinated melem units. The physicochemical characterization of NiCN with various analytical techniques including HAADF-STEM and X-ray absorption fine structure (XAFS) validate the successful formation of Ni single atoms coordinated to the heptazine-constituted CN network. The presence of uniform catalytic sites improved visible absorption and carrier separation in densely populated NiCN SAC resulting in 100% selective photoconversion of (CH4) to methanol using H2O2 as an oxidant. The superior catalytic activity can be attributed to the generation of high oxidation (NiIII═O) sites and selective C─H bond cleavage to generate •CH3 radicals on Ni centers, which can combine with •OH radicals to generate CH3OH.]]>
Direct selective transformation of greenhouse methane (CH4) to liquid oxygenates (methanol) can substitute energy-intensive two-step (reforming/Fischer–Tropsch) synthesis while creating environmental benefits. The development of inexpensive, selective, and robust catalysts that enable room temperature conversion will decide the future of this technology. Single-atom catalysts (SACs) with isolated active centers embedded in support have displayed significant promises in catalysis to drive challenging reactions. Herein, high-density Ni single atoms are developed and stabilized on carbon nitride (NiCN) via thermal condensation of preorganized Ni-coordinated melem units. The physicochemical characterization of NiCN with various analytical techniques including HAADF-STEM and X-ray absorption fine structure (XAFS) validate the successful formation of Ni single atoms coordinated to the heptazine-constituted CN network. The presence of uniform catalytic sites improved visible absorption and carrier separation in densely populated NiCN SAC resulting in 100% selective photoconversion of (CH4) to methanol using H2O2 as an oxidant. The superior catalytic activity can be attributed to the generation of high oxidation (NiIII═O) sites and selective C─H bond cleavage to generate •CH3 radicals on Ni centers, which can combine with •OH radicals to generate CH3OH.]]> Tue, 28 Nov 2023 02:17:06 GMT /slideshow/partial-thermal-condensation-mediated-synthesis-of-highdensity-nickel-single-atom-sites-on-carbon-nitride-for-selective-photooxidation-of-methane-into-methanol/263997634 pawankumar325@slideshare.net(pawankumar325) Partial Thermal Condensation Mediated Synthesis of High-Density Nickel Single Atom Sites on Carbon Nitride for Selective Photooxidation of Methane into Methanol pawankumar325 Direct selective transformation of greenhouse methane (CH4) to liquid oxygenates (methanol) can substitute energy-intensive two-step (reforming/Fischer–Tropsch) synthesis while creating environmental benefits. The development of inexpensive, selective, and robust catalysts that enable room temperature conversion will decide the future of this technology. Single-atom catalysts (SACs) with isolated active centers embedded in support have displayed significant promises in catalysis to drive challenging reactions. Herein, high-density Ni single atoms are developed and stabilized on carbon nitride (NiCN) via thermal condensation of preorganized Ni-coordinated melem units. The physicochemical characterization of NiCN with various analytical techniques including HAADF-STEM and X-ray absorption fine structure (XAFS) validate the successful formation of Ni single atoms coordinated to the heptazine-constituted CN network. The presence of uniform catalytic sites improved visible absorption and carrier separation in densely populated NiCN SAC resulting in 100% selective photoconversion of (CH4) to methanol using H2O2 as an oxidant. The superior catalytic activity can be attributed to the generation of high oxidation (NiIII═O) sites and selective C─H bond cleavage to generate •CH3 radicals on Ni centers, which can combine with •OH radicals to generate CH3OH. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/small-2023-kumar-partialthermalcondensationmediatedsynthesisofhighdensitynickelsingleatomsitesoncarb-231128021706-e90713c3-thumbnail.jpg?width=120&height=120&fit=bounds" /> Direct selective transformation of greenhouse methane (CH4) to liquid oxygenates (methanol) can substitute energy-intensive two-step (reforming/Fischer–Tropsch) synthesis while creating environmental benefits. The development of inexpensive, selective, and robust catalysts that enable room temperature conversion will decide the future of this technology. Single-atom catalysts (SACs) with isolated active centers embedded in support have displayed significant promises in catalysis to drive challenging reactions. Herein, high-density Ni single atoms are developed and stabilized on carbon nitride (NiCN) via thermal condensation of preorganized Ni-coordinated melem units. The physicochemical characterization of NiCN with various analytical techniques including HAADF-STEM and X-ray absorption fine structure (XAFS) validate the successful formation of Ni single atoms coordinated to the heptazine-constituted CN network. The presence of uniform catalytic sites improved visible absorption and carrier separation in densely populated NiCN SAC resulting in 100% selective photoconversion of (CH4) to methanol using H2O2 as an oxidant. The superior catalytic activity can be attributed to the generation of high oxidation (NiIII═O) sites and selective C─H bond cleavage to generate •CH3 radicals on Ni centers, which can combine with •OH radicals to generate CH3OH.

Partial Thermal Condensation Mediated Synthesis of High-Density Nickel Single Atom Sites on Carbon Nitride for Selective Photooxidation of Methane into Methanol from Pawan Kumar

]]> 5 0 https://cdn.slidesharecdn.com/ss_thumbnails/small-2023-kumar-partialthermalcondensationmediatedsynthesisofhighdensitynickelsingleatomsitesoncarb-231128021706-e90713c3-thumbnail.jpg?width=120&height=120&fit=bounds document Black http://activitystrea.ms/schema/1.0/post

http://activitystrea.ms/schema/1.0/posted

0 Recent advancements in tuning the electronic structures of transitional metal oxides for the electrocatalytic oxygen evolution reaction /pawankumar325/recent-advancements-in-tuning-the-electronic-structures-of-transitional-metal-oxides-for-the-electrocatalytic-oxygen-evolution-reaction 9780750357319webpdf-231121022423-63f5e8a2
The smooth transition from finite non-renewables to renewable energy conversion technologies will require efficient electrocatalysts which can harness intermittent energies to store in the form of chemical bonds. The oxygen evolution reaction (OER) impedes the widespread usage of water electrolyzers to convert H2O into H2 and persists as a bottleneck, including other energy conversion devices with sluggish four H+/e− kinetics. In this context, designing highly active and stable catalysts capable of driving a lower overpotential in the OER to produce continuous hydrogen (H2) is a primary demanded. This chapter discussed the mechanism of the OER in conventional adsorbate oxygen and lattice oxygen participation in transition metal oxides (TMOs). Further, the influences of surface engineering, doping, and defects in the TMOs and understanding the electronic structure to screen electrodes towards the structure–activity relationship are highlighted. Specifically, the adsorption strength of O 2p is understood in detail as its binding ability over the surface of TMOs can be correlated directly to the OER activity. The iterative development of TMOs in terms of understanding electronic structural attributes is essential for the commercial deployment of energy conversion technologies. The comprehensive outlook of this chapter investigates thoroughly how TMOs can be used as significant materials for the OER in the near future.]]>
The smooth transition from finite non-renewables to renewable energy conversion technologies will require efficient electrocatalysts which can harness intermittent energies to store in the form of chemical bonds. The oxygen evolution reaction (OER) impedes the widespread usage of water electrolyzers to convert H2O into H2 and persists as a bottleneck, including other energy conversion devices with sluggish four H+/e− kinetics. In this context, designing highly active and stable catalysts capable of driving a lower overpotential in the OER to produce continuous hydrogen (H2) is a primary demanded. This chapter discussed the mechanism of the OER in conventional adsorbate oxygen and lattice oxygen participation in transition metal oxides (TMOs). Further, the influences of surface engineering, doping, and defects in the TMOs and understanding the electronic structure to screen electrodes towards the structure–activity relationship are highlighted. Specifically, the adsorption strength of O 2p is understood in detail as its binding ability over the surface of TMOs can be correlated directly to the OER activity. The iterative development of TMOs in terms of understanding electronic structural attributes is essential for the commercial deployment of energy conversion technologies. The comprehensive outlook of this chapter investigates thoroughly how TMOs can be used as significant materials for the OER in the near future.]]> Tue, 21 Nov 2023 02:24:23 GMT /pawankumar325/recent-advancements-in-tuning-the-electronic-structures-of-transitional-metal-oxides-for-the-electrocatalytic-oxygen-evolution-reaction pawankumar325@slideshare.net(pawankumar325) Recent advancements in tuning the electronic structures of transitional metal oxides for the electrocatalytic oxygen evolution reaction pawankumar325 The smooth transition from finite non-renewables to renewable energy conversion technologies will require efficient electrocatalysts which can harness intermittent energies to store in the form of chemical bonds. The oxygen evolution reaction (OER) impedes the widespread usage of water electrolyzers to convert H2O into H2 and persists as a bottleneck, including other energy conversion devices with sluggish four H+/e− kinetics. In this context, designing highly active and stable catalysts capable of driving a lower overpotential in the OER to produce continuous hydrogen (H2) is a primary demanded. This chapter discussed the mechanism of the OER in conventional adsorbate oxygen and lattice oxygen participation in transition metal oxides (TMOs). Further, the influences of surface engineering, doping, and defects in the TMOs and understanding the electronic structure to screen electrodes towards the structure–activity relationship are highlighted. Specifically, the adsorption strength of O 2p is understood in detail as its binding ability over the surface of TMOs can be correlated directly to the OER activity. The iterative development of TMOs in terms of understanding electronic structural attributes is essential for the commercial deployment of energy conversion technologies. The comprehensive outlook of this chapter investigates thoroughly how TMOs can be used as significant materials for the OER in the near future. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/9780750357319webpdf-231121022423-63f5e8a2-thumbnail.jpg?width=120&height=120&fit=bounds" /> The smooth transition from finite non-renewables to renewable energy conversion technologies will require efficient electrocatalysts which can harness intermittent energies to store in the form of chemical bonds. The oxygen evolution reaction (OER) impedes the widespread usage of water electrolyzers to convert H2O into H2 and persists as a bottleneck, including other energy conversion devices with sluggish four H+/e− kinetics. In this context, designing highly active and stable catalysts capable of driving a lower overpotential in the OER to produce continuous hydrogen (H2) is a primary demanded. This chapter discussed the mechanism of the OER in conventional adsorbate oxygen and lattice oxygen participation in transition metal oxides (TMOs). Further, the influences of surface engineering, doping, and defects in the TMOs and understanding the electronic structure to screen electrodes towards the structure–activity relationship are highlighted. Specifically, the adsorption strength of O 2p is understood in detail as its binding ability over the surface of TMOs can be correlated directly to the OER activity. The iterative development of TMOs in terms of understanding electronic structural attributes is essential for the commercial deployment of energy conversion technologies. The comprehensive outlook of this chapter investigates thoroughly how TMOs can be used as significant materials for the OER in the near future.

Recent advancements in tuning the electronic structures of transitional metal oxides for the electrocatalytic oxygen evolution reaction from Pawan Kumar

]]> 13 0 https://cdn.slidesharecdn.com/ss_thumbnails/9780750357319webpdf-231121022423-63f5e8a2-thumbnail.jpg?width=120&height=120&fit=bounds document Black http://activitystrea.ms/schema/1.0/post

http://activitystrea.ms/schema/1.0/posted

0 Pyrazino[2,3-g]quinoxaline core-based organic liquid crystalline semiconductor: Proficient hole transporting material for optoelectronic devices /pawankumar325/pyrazino23gquinoxaline-corebased-organic-liquid-crystalline-semiconductor-proficient-hole-transporting-material-for-optoelectronic-devices 1-s2-231121022207-ca8240e7
Hole transport materials (HTMs) have a significant impact on the effectiveness of organic electronic devices; therefore, we present a molecular architecture of pyrazino[2,3-g]quinoxaline (PQ10)-based room-temperature organic liquid crystalline semiconductor (OLCS) as an alternative HTM. The PQ10 compound exhibits three different rectangular columnar (Colr) phases offering an impressive hole mobility of 8.8 × 10−3 cm2V−1s−1 which is found to be dexterous than most of existing polymeric hole transport materials. The charge transport mechanism is governed by the hole polarons hopping through H-aggregates of the PQ10 molecules and the hole mobility remains nearly constant throughout the mesophase range, but it decreases with increasing applied electric field. The current-voltage characteristics of the PQ10 have also been investigated in all three Colr phases and explained via the Poole-Frenkel conduction mechanism. The dielectric spectroscopy has been eventually carried out to understand the nature of dielectric permittivity and conductivity as a function of temperature and a correlation is established between the molecular architecture of the Colr phases and aforementioned physical properties. Solar cell simulation has been additionally performed to demonstrate that the PQ10 material can be a better choice as HTM for organic electronics and photovoltaic applications.]]>
Hole transport materials (HTMs) have a significant impact on the effectiveness of organic electronic devices; therefore, we present a molecular architecture of pyrazino[2,3-g]quinoxaline (PQ10)-based room-temperature organic liquid crystalline semiconductor (OLCS) as an alternative HTM. The PQ10 compound exhibits three different rectangular columnar (Colr) phases offering an impressive hole mobility of 8.8 × 10−3 cm2V−1s−1 which is found to be dexterous than most of existing polymeric hole transport materials. The charge transport mechanism is governed by the hole polarons hopping through H-aggregates of the PQ10 molecules and the hole mobility remains nearly constant throughout the mesophase range, but it decreases with increasing applied electric field. The current-voltage characteristics of the PQ10 have also been investigated in all three Colr phases and explained via the Poole-Frenkel conduction mechanism. The dielectric spectroscopy has been eventually carried out to understand the nature of dielectric permittivity and conductivity as a function of temperature and a correlation is established between the molecular architecture of the Colr phases and aforementioned physical properties. Solar cell simulation has been additionally performed to demonstrate that the PQ10 material can be a better choice as HTM for organic electronics and photovoltaic applications.]]> Tue, 21 Nov 2023 02:22:07 GMT /pawankumar325/pyrazino23gquinoxaline-corebased-organic-liquid-crystalline-semiconductor-proficient-hole-transporting-material-for-optoelectronic-devices pawankumar325@slideshare.net(pawankumar325) Pyrazino[2,3-g]quinoxaline core-based organic liquid crystalline semiconductor: Proficient hole transporting material for optoelectronic devices pawankumar325 Hole transport materials (HTMs) have a significant impact on the effectiveness of organic electronic devices; therefore, we present a molecular architecture of pyrazino[2,3-g]quinoxaline (PQ10)-based room-temperature organic liquid crystalline semiconductor (OLCS) as an alternative HTM. The PQ10 compound exhibits three different rectangular columnar (Colr) phases offering an impressive hole mobility of 8.8 × 10−3 cm2V−1s−1 which is found to be dexterous than most of existing polymeric hole transport materials. The charge transport mechanism is governed by the hole polarons hopping through H-aggregates of the PQ10 molecules and the hole mobility remains nearly constant throughout the mesophase range, but it decreases with increasing applied electric field. The current-voltage characteristics of the PQ10 have also been investigated in all three Colr phases and explained via the Poole-Frenkel conduction mechanism. The dielectric spectroscopy has been eventually carried out to understand the nature of dielectric permittivity and conductivity as a function of temperature and a correlation is established between the molecular architecture of the Colr phases and aforementioned physical properties. Solar cell simulation has been additionally performed to demonstrate that the PQ10 material can be a better choice as HTM for organic electronics and photovoltaic applications. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/1-s2-231121022207-ca8240e7-thumbnail.jpg?width=120&height=120&fit=bounds" /> Hole transport materials (HTMs) have a significant impact on the effectiveness of organic electronic devices; therefore, we present a molecular architecture of pyrazino[2,3-g]quinoxaline (PQ10)-based room-temperature organic liquid crystalline semiconductor (OLCS) as an alternative HTM. The PQ10 compound exhibits three different rectangular columnar (Colr) phases offering an impressive hole mobility of 8.8 × 10−3 cm2V−1s−1 which is found to be dexterous than most of existing polymeric hole transport materials. The charge transport mechanism is governed by the hole polarons hopping through H-aggregates of the PQ10 molecules and the hole mobility remains nearly constant throughout the mesophase range, but it decreases with increasing applied electric field. The current-voltage characteristics of the PQ10 have also been investigated in all three Colr phases and explained via the Poole-Frenkel conduction mechanism. The dielectric spectroscopy has been eventually carried out to understand the nature of dielectric permittivity and conductivity as a function of temperature and a correlation is established between the molecular architecture of the Colr phases and aforementioned physical properties. Solar cell simulation has been additionally performed to demonstrate that the PQ10 material can be a better choice as HTM for organic electronics and photovoltaic applications.

Pyrazino[2,3-g]quinoxaline core-based organic liquid crystalline semiconductor: Proficient hole transporting material for optoelectronic devices from Pawan Kumar

]]> 6 0 https://cdn.slidesharecdn.com/ss_thumbnails/1-s2-231121022207-ca8240e7-thumbnail.jpg?width=120&height=120&fit=bounds document Black http://activitystrea.ms/schema/1.0/post

http://activitystrea.ms/schema/1.0/posted

0 Multifunctional carbon nitride nanoarchitectures for catalysis /slideshow/multifunctional-carbon-nitride-nanoarchitectures-for-catalysis/262259135 d3cs00213f-231015213732-f3671697
Catalysis is at the heart of modern-day chemical and pharmaceutical industries, and there is an urgent demand to develop metal-free, high surface area, and efficient catalysts in a scalable, reproducible and economic manner. Amongst the ever-expanding two-dimensional materials family, carbon nitride (CN) has emerged as the most researched material for catalytic applications due to its unique molecular structure with tunable visible range band gap, surface defects, basic sites, and nitrogen functionalities. These properties also endow it with anchoring capability with a large number of catalytically active sites and provide opportunities for doping, hybridization, sensitization, etc. To make considerable progress in the use of CN as a highly effective catalyst for various applications, it is critical to have an in-depth understanding of its synthesis, structure and surface sites. The present review provides an overview of the recent advances in synthetic approaches of CN, its physicochemical properties, and band gap engineering, with a focus on its exclusive usage in a variety of catalytic reactions, including hydrogen evolution reactions, overall water splitting, water oxidation, CO2 reduction, nitrogen reduction reactions, pollutant degradation, and organocatalysis. While the structural design and band gap engineering of catalysts are elaborated, the surface chemistry is dealt with in detail to demonstrate efficient catalytic performances. Burning challenges in catalytic design and future outlook are elucidated.]]>
Catalysis is at the heart of modern-day chemical and pharmaceutical industries, and there is an urgent demand to develop metal-free, high surface area, and efficient catalysts in a scalable, reproducible and economic manner. Amongst the ever-expanding two-dimensional materials family, carbon nitride (CN) has emerged as the most researched material for catalytic applications due to its unique molecular structure with tunable visible range band gap, surface defects, basic sites, and nitrogen functionalities. These properties also endow it with anchoring capability with a large number of catalytically active sites and provide opportunities for doping, hybridization, sensitization, etc. To make considerable progress in the use of CN as a highly effective catalyst for various applications, it is critical to have an in-depth understanding of its synthesis, structure and surface sites. The present review provides an overview of the recent advances in synthetic approaches of CN, its physicochemical properties, and band gap engineering, with a focus on its exclusive usage in a variety of catalytic reactions, including hydrogen evolution reactions, overall water splitting, water oxidation, CO2 reduction, nitrogen reduction reactions, pollutant degradation, and organocatalysis. While the structural design and band gap engineering of catalysts are elaborated, the surface chemistry is dealt with in detail to demonstrate efficient catalytic performances. Burning challenges in catalytic design and future outlook are elucidated.]]> Sun, 15 Oct 2023 21:37:32 GMT /slideshow/multifunctional-carbon-nitride-nanoarchitectures-for-catalysis/262259135 pawankumar325@slideshare.net(pawankumar325) Multifunctional carbon nitride nanoarchitectures for catalysis pawankumar325 Catalysis is at the heart of modern-day chemical and pharmaceutical industries, and there is an urgent demand to develop metal-free, high surface area, and efficient catalysts in a scalable, reproducible and economic manner. Amongst the ever-expanding two-dimensional materials family, carbon nitride (CN) has emerged as the most researched material for catalytic applications due to its unique molecular structure with tunable visible range band gap, surface defects, basic sites, and nitrogen functionalities. These properties also endow it with anchoring capability with a large number of catalytically active sites and provide opportunities for doping, hybridization, sensitization, etc. To make considerable progress in the use of CN as a highly effective catalyst for various applications, it is critical to have an in-depth understanding of its synthesis, structure and surface sites. The present review provides an overview of the recent advances in synthetic approaches of CN, its physicochemical properties, and band gap engineering, with a focus on its exclusive usage in a variety of catalytic reactions, including hydrogen evolution reactions, overall water splitting, water oxidation, CO2 reduction, nitrogen reduction reactions, pollutant degradation, and organocatalysis. While the structural design and band gap engineering of catalysts are elaborated, the surface chemistry is dealt with in detail to demonstrate efficient catalytic performances. Burning challenges in catalytic design and future outlook are elucidated. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/d3cs00213f-231015213732-f3671697-thumbnail.jpg?width=120&height=120&fit=bounds" /> Catalysis is at the heart of modern-day chemical and pharmaceutical industries, and there is an urgent demand to develop metal-free, high surface area, and efficient catalysts in a scalable, reproducible and economic manner. Amongst the ever-expanding two-dimensional materials family, carbon nitride (CN) has emerged as the most researched material for catalytic applications due to its unique molecular structure with tunable visible range band gap, surface defects, basic sites, and nitrogen functionalities. These properties also endow it with anchoring capability with a large number of catalytically active sites and provide opportunities for doping, hybridization, sensitization, etc. To make considerable progress in the use of CN as a highly effective catalyst for various applications, it is critical to have an in-depth understanding of its synthesis, structure and surface sites. The present review provides an overview of the recent advances in synthetic approaches of CN, its physicochemical properties, and band gap engineering, with a focus on its exclusive usage in a variety of catalytic reactions, including hydrogen evolution reactions, overall water splitting, water oxidation, CO2 reduction, nitrogen reduction reactions, pollutant degradation, and organocatalysis. While the structural design and band gap engineering of catalysts are elaborated, the surface chemistry is dealt with in detail to demonstrate efficient catalytic performances. Burning challenges in catalytic design and future outlook are elucidated.

Multifunctional carbon nitride nanoarchitectures for catalysis from Pawan Kumar

]]> 60 0 https://cdn.slidesharecdn.com/ss_thumbnails/d3cs00213f-231015213732-f3671697-thumbnail.jpg?width=120&height=120&fit=bounds document Black http://activitystrea.ms/schema/1.0/post

http://activitystrea.ms/schema/1.0/posted

0 Production of Renewable Fuels by the Photocatalytic Reduction of CO2 using Magnesium Doped Natural Ilmenite /slideshow/production-of-renewable-fuels-by-the-photocatalytic-reduction-of-co2-using-magnesium-doped-natural-ilmenite/261975056 1-s2-231009214553-97fc650f
The photo-reductive performance of natural ilmenite was boosted and the production of renewable fuels from the reduction of CO2 was enhanced by doping the natural mineral with magnesium. The doping was achieved by high energy ball milling in the presence of MgO and Mg(NO3)2. The photo-reduction of CO2 in aqueous solution led to the evolution of H2, CH4, C2H4, and C2H6, and the insertion of Mg in the structure of ilmenite enabled increases of up to 1245% in the fuel production yield, reaching total production of 210.9 µmol h-1 gcat-1. Displacements of the conduction band to more negative potentials were evidenced for the samples doped with magnesium. Indirect effects such as increases in the valence band maximum, and the introduction of intermediate energy levels were also evidenced through the measurement of the crystallite size and the determination of the band structure of the materials. Mott-Schottky analyses of the samples showed the n-type nature of the semiconductor materials and enabled the estimation of the density of charge carriers, which strongly influenced the photocatalytic performance. The strong potential of the application of natural ilmenite in gas phase artificial photosynthesis was proved by the evaluation of CO2 reduction in gas conditions, which allowed the enhancement in the selectivity and significantly increased the production of CH4 as compared to aqueous solution, reaching an important yield of CH4 of 16.1 µmol h-1 gcat-1.]]>
The photo-reductive performance of natural ilmenite was boosted and the production of renewable fuels from the reduction of CO2 was enhanced by doping the natural mineral with magnesium. The doping was achieved by high energy ball milling in the presence of MgO and Mg(NO3)2. The photo-reduction of CO2 in aqueous solution led to the evolution of H2, CH4, C2H4, and C2H6, and the insertion of Mg in the structure of ilmenite enabled increases of up to 1245% in the fuel production yield, reaching total production of 210.9 µmol h-1 gcat-1. Displacements of the conduction band to more negative potentials were evidenced for the samples doped with magnesium. Indirect effects such as increases in the valence band maximum, and the introduction of intermediate energy levels were also evidenced through the measurement of the crystallite size and the determination of the band structure of the materials. Mott-Schottky analyses of the samples showed the n-type nature of the semiconductor materials and enabled the estimation of the density of charge carriers, which strongly influenced the photocatalytic performance. The strong potential of the application of natural ilmenite in gas phase artificial photosynthesis was proved by the evaluation of CO2 reduction in gas conditions, which allowed the enhancement in the selectivity and significantly increased the production of CH4 as compared to aqueous solution, reaching an important yield of CH4 of 16.1 µmol h-1 gcat-1.]]> Mon, 09 Oct 2023 21:45:53 GMT /slideshow/production-of-renewable-fuels-by-the-photocatalytic-reduction-of-co2-using-magnesium-doped-natural-ilmenite/261975056 pawankumar325@slideshare.net(pawankumar325) Production of Renewable Fuels by the Photocatalytic Reduction of CO2 using Magnesium Doped Natural Ilmenite pawankumar325 The photo-reductive performance of natural ilmenite was boosted and the production of renewable fuels from the reduction of CO2 was enhanced by doping the natural mineral with magnesium. The doping was achieved by high energy ball milling in the presence of MgO and Mg(NO3)2. The photo-reduction of CO2 in aqueous solution led to the evolution of H2, CH4, C2H4, and C2H6, and the insertion of Mg in the structure of ilmenite enabled increases of up to 1245% in the fuel production yield, reaching total production of 210.9 µmol h-1 gcat-1. Displacements of the conduction band to more negative potentials were evidenced for the samples doped with magnesium. Indirect effects such as increases in the valence band maximum, and the introduction of intermediate energy levels were also evidenced through the measurement of the crystallite size and the determination of the band structure of the materials. Mott-Schottky analyses of the samples showed the n-type nature of the semiconductor materials and enabled the estimation of the density of charge carriers, which strongly influenced the photocatalytic performance. The strong potential of the application of natural ilmenite in gas phase artificial photosynthesis was proved by the evaluation of CO2 reduction in gas conditions, which allowed the enhancement in the selectivity and significantly increased the production of CH4 as compared to aqueous solution, reaching an important yield of CH4 of 16.1 µmol h-1 gcat-1. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/1-s2-231009214553-97fc650f-thumbnail.jpg?width=120&height=120&fit=bounds" /> The photo-reductive performance of natural ilmenite was boosted and the production of renewable fuels from the reduction of CO2 was enhanced by doping the natural mineral with magnesium. The doping was achieved by high energy ball milling in the presence of MgO and Mg(NO3)2. The photo-reduction of CO2 in aqueous solution led to the evolution of H2, CH4, C2H4, and C2H6, and the insertion of Mg in the structure of ilmenite enabled increases of up to 1245% in the fuel production yield, reaching total production of 210.9 µmol h-1 gcat-1. Displacements of the conduction band to more negative potentials were evidenced for the samples doped with magnesium. Indirect effects such as increases in the valence band maximum, and the introduction of intermediate energy levels were also evidenced through the measurement of the crystallite size and the determination of the band structure of the materials. Mott-Schottky analyses of the samples showed the n-type nature of the semiconductor materials and enabled the estimation of the density of charge carriers, which strongly influenced the photocatalytic performance. The strong potential of the application of natural ilmenite in gas phase artificial photosynthesis was proved by the evaluation of CO2 reduction in gas conditions, which allowed the enhancement in the selectivity and significantly increased the production of CH4 as compared to aqueous solution, reaching an important yield of CH4 of 16.1 µmol h-1 gcat-1.

Production of Renewable Fuels by the Photocatalytic Reduction of CO2 using Magnesium Doped Natural Ilmenite from Pawan Kumar

]]> 35 0 https://cdn.slidesharecdn.com/ss_thumbnails/1-s2-231009214553-97fc650f-thumbnail.jpg?width=120&height=120&fit=bounds document Black http://activitystrea.ms/schema/1.0/post

http://activitystrea.ms/schema/1.0/posted

0 Nanoengineered Au-Carbon Nitride Interfaces Enhance PhotoCatalytic Pure Water Splitting /slideshow/nanoengineered-aucarbon-nitride-interfaces-enhance-photocatalytic-pure-water-splitting-261320980/261320980 d3ta05201j-230923070015-4ce739ad
Photocatalytic pure water splitting using solar energy is one of the promising routes to produce sustainable green hydrogen (H2). Tuning the interfacial active site density at catalytic heterojunctions and better light management are imperative to steer the structure-activity correlations to enhance the photo-efficiency of nanocomposite photocatalysts. Herein, we report the decoration of nitrogen defects-rich carbon nitride CN(T) with metallic Au nanostructures of different morphologies and sizes to investigate their influence on the photocatalytic hydrogen evolution reactions (HER). The CN(T)-7-NP nano-heterostructure comprises Au nanoparticles (NPs) of ~7 nm and thiourea-derived defective CN exhibits an excellent H2 production rate of 76.8 µmol g–1 h–1 from pure water under simulated AM 1.5 solar irradiation. In contrast to large-size Au nanorods, the high activity of CN(T)-7-NP was attributed to their strong localized surface plasmon resonance (LSPR) mediated visible absorption and interfacial charge separation. The surface ligands used to control Au nanostructures morphology were found to play a major role in the stabilization of NPs and improve interfacial charge transport between Au NPs and CN(T). First-principles calculations revealed that defects in CN and Au-CN interfacial sites in these nanocomposites facilitate the separation of e-/h+ pairs after light excitation and provide lower energy barrier pathways for H2 production by photocatalytic water splitting.]]>
Photocatalytic pure water splitting using solar energy is one of the promising routes to produce sustainable green hydrogen (H2). Tuning the interfacial active site density at catalytic heterojunctions and better light management are imperative to steer the structure-activity correlations to enhance the photo-efficiency of nanocomposite photocatalysts. Herein, we report the decoration of nitrogen defects-rich carbon nitride CN(T) with metallic Au nanostructures of different morphologies and sizes to investigate their influence on the photocatalytic hydrogen evolution reactions (HER). The CN(T)-7-NP nano-heterostructure comprises Au nanoparticles (NPs) of ~7 nm and thiourea-derived defective CN exhibits an excellent H2 production rate of 76.8 µmol g–1 h–1 from pure water under simulated AM 1.5 solar irradiation. In contrast to large-size Au nanorods, the high activity of CN(T)-7-NP was attributed to their strong localized surface plasmon resonance (LSPR) mediated visible absorption and interfacial charge separation. The surface ligands used to control Au nanostructures morphology were found to play a major role in the stabilization of NPs and improve interfacial charge transport between Au NPs and CN(T). First-principles calculations revealed that defects in CN and Au-CN interfacial sites in these nanocomposites facilitate the separation of e-/h+ pairs after light excitation and provide lower energy barrier pathways for H2 production by photocatalytic water splitting.]]> Sat, 23 Sep 2023 07:00:15 GMT /slideshow/nanoengineered-aucarbon-nitride-interfaces-enhance-photocatalytic-pure-water-splitting-261320980/261320980 pawankumar325@slideshare.net(pawankumar325) Nanoengineered Au-Carbon Nitride Interfaces Enhance PhotoCatalytic Pure Water Splitting pawankumar325 Photocatalytic pure water splitting using solar energy is one of the promising routes to produce sustainable green hydrogen (H2). Tuning the interfacial active site density at catalytic heterojunctions and better light management are imperative to steer the structure-activity correlations to enhance the photo-efficiency of nanocomposite photocatalysts. Herein, we report the decoration of nitrogen defects-rich carbon nitride CN(T) with metallic Au nanostructures of different morphologies and sizes to investigate their influence on the photocatalytic hydrogen evolution reactions (HER). The CN(T)-7-NP nano-heterostructure comprises Au nanoparticles (NPs) of ~7 nm and thiourea-derived defective CN exhibits an excellent H2 production rate of 76.8 µmol g–1 h–1 from pure water under simulated AM 1.5 solar irradiation. In contrast to large-size Au nanorods, the high activity of CN(T)-7-NP was attributed to their strong localized surface plasmon resonance (LSPR) mediated visible absorption and interfacial charge separation. The surface ligands used to control Au nanostructures morphology were found to play a major role in the stabilization of NPs and improve interfacial charge transport between Au NPs and CN(T). First-principles calculations revealed that defects in CN and Au-CN interfacial sites in these nanocomposites facilitate the separation of e-/h+ pairs after light excitation and provide lower energy barrier pathways for H2 production by photocatalytic water splitting. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/d3ta05201j-230923070015-4ce739ad-thumbnail.jpg?width=120&height=120&fit=bounds" /> Photocatalytic pure water splitting using solar energy is one of the promising routes to produce sustainable green hydrogen (H2). Tuning the interfacial active site density at catalytic heterojunctions and better light management are imperative to steer the structure-activity correlations to enhance the photo-efficiency of nanocomposite photocatalysts. Herein, we report the decoration of nitrogen defects-rich carbon nitride CN(T) with metallic Au nanostructures of different morphologies and sizes to investigate their influence on the photocatalytic hydrogen evolution reactions (HER). The CN(T)-7-NP nano-heterostructure comprises Au nanoparticles (NPs) of ~7 nm and thiourea-derived defective CN exhibits an excellent H2 production rate of 76.8 µmol g–1 h–1 from pure water under simulated AM 1.5 solar irradiation. In contrast to large-size Au nanorods, the high activity of CN(T)-7-NP was attributed to their strong localized surface plasmon resonance (LSPR) mediated visible absorption and interfacial charge separation. The surface ligands used to control Au nanostructures morphology were found to play a major role in the stabilization of NPs and improve interfacial charge transport between Au NPs and CN(T). First-principles calculations revealed that defects in CN and Au-CN interfacial sites in these nanocomposites facilitate the separation of e-/h+ pairs after light excitation and provide lower energy barrier pathways for H2 production by photocatalytic water splitting.

Nanoengineered Au-Carbon Nitride Interfaces Enhance PhotoCatalytic Pure Water Splitting from Pawan Kumar

]]> 17 0 https://cdn.slidesharecdn.com/ss_thumbnails/d3ta05201j-230923070015-4ce739ad-thumbnail.jpg?width=120&height=120&fit=bounds document Black http://activitystrea.ms/schema/1.0/post

http://activitystrea.ms/schema/1.0/posted

0 Nanoengineered Au-Carbon Nitride Interfaces Enhance Photo-Catalytic Pure Water Splitting /slideshow/nanoengineered-aucarbon-nitride-interfaces-enhance-photocatalytic-pure-water-splitting/261277461 d3ta05201j1-230922070434-3da9f296
Photocatalytic pure water splitting using solar energy is one of the promising routes to produce sustainable green hydrogen (H2). Tuning the interfacial active site density at catalytic heterojunctions and better light management are imperative to steer the structure-activity correlations to enhance the photo-efficiency of nanocomposite photocatalysts. Herein, we report the decoration of nitrogen defects-rich carbon nitride CN(T) with metallic Au nanostructures of different morphologies and sizes to investigate their influence on the photocatalytic hydrogen evolution reactions (HER). The CN(T)-7-NP nano-heterostructure comprises Au nanoparticles (NPs) of ~7 nm and thiourea-derived defective CN exhibits an excellent H2 production rate of 76.8 µmol g–1 h–1 from pure water under simulated AM 1.5 solar irradiation. In contrast to large-size Au nanorods, the high activity of CN(T)-7-NP was attributed to their strong localized surface plasmon resonance (LSPR) mediated visible absorption and interfacial charge separation. The surface ligands used to control Au nanostructures morphology were found to play a major role in the stabilization of NPs and improve interfacial charge transport between Au NPs and CN(T). First-principles calculations revealed that defects in CN and Au-CN interfacial sites in these nanocomposites facilitate the separation of e-/h+ pairs after light excitation and provide lower energy barrier pathways for H2 production by photocatalytic water splitting.]]>
Photocatalytic pure water splitting using solar energy is one of the promising routes to produce sustainable green hydrogen (H2). Tuning the interfacial active site density at catalytic heterojunctions and better light management are imperative to steer the structure-activity correlations to enhance the photo-efficiency of nanocomposite photocatalysts. Herein, we report the decoration of nitrogen defects-rich carbon nitride CN(T) with metallic Au nanostructures of different morphologies and sizes to investigate their influence on the photocatalytic hydrogen evolution reactions (HER). The CN(T)-7-NP nano-heterostructure comprises Au nanoparticles (NPs) of ~7 nm and thiourea-derived defective CN exhibits an excellent H2 production rate of 76.8 µmol g–1 h–1 from pure water under simulated AM 1.5 solar irradiation. In contrast to large-size Au nanorods, the high activity of CN(T)-7-NP was attributed to their strong localized surface plasmon resonance (LSPR) mediated visible absorption and interfacial charge separation. The surface ligands used to control Au nanostructures morphology were found to play a major role in the stabilization of NPs and improve interfacial charge transport between Au NPs and CN(T). First-principles calculations revealed that defects in CN and Au-CN interfacial sites in these nanocomposites facilitate the separation of e-/h+ pairs after light excitation and provide lower energy barrier pathways for H2 production by photocatalytic water splitting.]]> Fri, 22 Sep 2023 07:04:33 GMT /slideshow/nanoengineered-aucarbon-nitride-interfaces-enhance-photocatalytic-pure-water-splitting/261277461 pawankumar325@slideshare.net(pawankumar325) Nanoengineered Au-Carbon Nitride Interfaces Enhance Photo-Catalytic Pure Water Splitting pawankumar325 Photocatalytic pure water splitting using solar energy is one of the promising routes to produce sustainable green hydrogen (H2). Tuning the interfacial active site density at catalytic heterojunctions and better light management are imperative to steer the structure-activity correlations to enhance the photo-efficiency of nanocomposite photocatalysts. Herein, we report the decoration of nitrogen defects-rich carbon nitride CN(T) with metallic Au nanostructures of different morphologies and sizes to investigate their influence on the photocatalytic hydrogen evolution reactions (HER). The CN(T)-7-NP nano-heterostructure comprises Au nanoparticles (NPs) of ~7 nm and thiourea-derived defective CN exhibits an excellent H2 production rate of 76.8 µmol g–1 h–1 from pure water under simulated AM 1.5 solar irradiation. In contrast to large-size Au nanorods, the high activity of CN(T)-7-NP was attributed to their strong localized surface plasmon resonance (LSPR) mediated visible absorption and interfacial charge separation. The surface ligands used to control Au nanostructures morphology were found to play a major role in the stabilization of NPs and improve interfacial charge transport between Au NPs and CN(T). First-principles calculations revealed that defects in CN and Au-CN interfacial sites in these nanocomposites facilitate the separation of e-/h+ pairs after light excitation and provide lower energy barrier pathways for H2 production by photocatalytic water splitting. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/d3ta05201j1-230922070434-3da9f296-thumbnail.jpg?width=120&height=120&fit=bounds" /> Photocatalytic pure water splitting using solar energy is one of the promising routes to produce sustainable green hydrogen (H2). Tuning the interfacial active site density at catalytic heterojunctions and better light management are imperative to steer the structure-activity correlations to enhance the photo-efficiency of nanocomposite photocatalysts. Herein, we report the decoration of nitrogen defects-rich carbon nitride CN(T) with metallic Au nanostructures of different morphologies and sizes to investigate their influence on the photocatalytic hydrogen evolution reactions (HER). The CN(T)-7-NP nano-heterostructure comprises Au nanoparticles (NPs) of ~7 nm and thiourea-derived defective CN exhibits an excellent H2 production rate of 76.8 µmol g–1 h–1 from pure water under simulated AM 1.5 solar irradiation. In contrast to large-size Au nanorods, the high activity of CN(T)-7-NP was attributed to their strong localized surface plasmon resonance (LSPR) mediated visible absorption and interfacial charge separation. The surface ligands used to control Au nanostructures morphology were found to play a major role in the stabilization of NPs and improve interfacial charge transport between Au NPs and CN(T). First-principles calculations revealed that defects in CN and Au-CN interfacial sites in these nanocomposites facilitate the separation of e-/h+ pairs after light excitation and provide lower energy barrier pathways for H2 production by photocatalytic water splitting.

Nanoengineered Au-Carbon Nitride Interfaces Enhance Photo-Catalytic Pure Water Splitting from Pawan Kumar

]]> 9 0 https://cdn.slidesharecdn.com/ss_thumbnails/d3ta05201j1-230922070434-3da9f296-thumbnail.jpg?width=120&height=120&fit=bounds document Black http://activitystrea.ms/schema/1.0/post

http://activitystrea.ms/schema/1.0/posted

0 Cooperative Copper Single Atom Catalyst in Two-dimensional Carbon Nitride for Enhanced CO2 Electrolysis to Methane /slideshow/cooperative-copper-single-atom-catalyst-in-twodimensional-carbon-nitride-for-enhanced-co2-electrolysis-to-methane/260775856 advancedmaterials-2023-roy-230910170832-2e505610
Renewable electricity powered carbon dioxide (CO2) reduction (eCO2R) to high-value fuels like methane (CH4) holds the potential to close the carbon cycle at meaningful scales. However, this kinetically staggered 8-electron multistep reduction still suffers from inadequate catalytic efficiency and current density. Atomic Cu-structures can boost eCO2R-to-CH4 selectivity due to enhanced intermediate binding energies (BEs) resulting from favorably shifted d-band centers. Herein, we exploit two-dimensional carbon nitride (CN) matrices, viz. Na-polyheptazine (PHI) and Li-polytriazine imides (PTI), to host Cu-N2 type single atom sites with high density (∼1.5 at%), via a facile metal ion exchange process. Optimized Cu loading in nanocrystalline Cu-PTI maximizes eCO2R-to-CH4 performance with Faradaic efficiency (FECH4) of ≈68% and a high partial current density of 348 mA cm−2 at a low potential of -0.84 V versus RHE, surpassing the state-of-the-art catalysts. Multi-Cu substituted N-appended nanopores in the CN frameworks yield thermodynamically stable quasi-dual/triple sites with large interatomic distances dictated by the pore dimensions. First-principles calculations elucidate the relative Cu-CN cooperative effects between the two matrices and how the Cu-Cu distance and local environment dictate the adsorbate BEs, density of states, and CO2-to-CH4 energy profile landscape. The 9N pores in Cu-PTI yield cooperative Cu-Cu sites that synergistically enhance the kinetics of the rate-limiting steps in the eCO2R-to-CH4 pathway.]]>
Renewable electricity powered carbon dioxide (CO2) reduction (eCO2R) to high-value fuels like methane (CH4) holds the potential to close the carbon cycle at meaningful scales. However, this kinetically staggered 8-electron multistep reduction still suffers from inadequate catalytic efficiency and current density. Atomic Cu-structures can boost eCO2R-to-CH4 selectivity due to enhanced intermediate binding energies (BEs) resulting from favorably shifted d-band centers. Herein, we exploit two-dimensional carbon nitride (CN) matrices, viz. Na-polyheptazine (PHI) and Li-polytriazine imides (PTI), to host Cu-N2 type single atom sites with high density (∼1.5 at%), via a facile metal ion exchange process. Optimized Cu loading in nanocrystalline Cu-PTI maximizes eCO2R-to-CH4 performance with Faradaic efficiency (FECH4) of ≈68% and a high partial current density of 348 mA cm−2 at a low potential of -0.84 V versus RHE, surpassing the state-of-the-art catalysts. Multi-Cu substituted N-appended nanopores in the CN frameworks yield thermodynamically stable quasi-dual/triple sites with large interatomic distances dictated by the pore dimensions. First-principles calculations elucidate the relative Cu-CN cooperative effects between the two matrices and how the Cu-Cu distance and local environment dictate the adsorbate BEs, density of states, and CO2-to-CH4 energy profile landscape. The 9N pores in Cu-PTI yield cooperative Cu-Cu sites that synergistically enhance the kinetics of the rate-limiting steps in the eCO2R-to-CH4 pathway.]]> Sun, 10 Sep 2023 17:08:31 GMT /slideshow/cooperative-copper-single-atom-catalyst-in-twodimensional-carbon-nitride-for-enhanced-co2-electrolysis-to-methane/260775856 pawankumar325@slideshare.net(pawankumar325) Cooperative Copper Single Atom Catalyst in Two-dimensional Carbon Nitride for Enhanced CO2 Electrolysis to Methane pawankumar325 Renewable electricity powered carbon dioxide (CO2) reduction (eCO2R) to high-value fuels like methane (CH4) holds the potential to close the carbon cycle at meaningful scales. However, this kinetically staggered 8-electron multistep reduction still suffers from inadequate catalytic efficiency and current density. Atomic Cu-structures can boost eCO2R-to-CH4 selectivity due to enhanced intermediate binding energies (BEs) resulting from favorably shifted d-band centers. Herein, we exploit two-dimensional carbon nitride (CN) matrices, viz. Na-polyheptazine (PHI) and Li-polytriazine imides (PTI), to host Cu-N2 type single atom sites with high density (∼1.5 at%), via a facile metal ion exchange process. Optimized Cu loading in nanocrystalline Cu-PTI maximizes eCO2R-to-CH4 performance with Faradaic efficiency (FECH4) of ≈68% and a high partial current density of 348 mA cm−2 at a low potential of -0.84 V versus RHE, surpassing the state-of-the-art catalysts. Multi-Cu substituted N-appended nanopores in the CN frameworks yield thermodynamically stable quasi-dual/triple sites with large interatomic distances dictated by the pore dimensions. First-principles calculations elucidate the relative Cu-CN cooperative effects between the two matrices and how the Cu-Cu distance and local environment dictate the adsorbate BEs, density of states, and CO2-to-CH4 energy profile landscape. The 9N pores in Cu-PTI yield cooperative Cu-Cu sites that synergistically enhance the kinetics of the rate-limiting steps in the eCO2R-to-CH4 pathway. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/advancedmaterials-2023-roy-230910170832-2e505610-thumbnail.jpg?width=120&height=120&fit=bounds" /> Renewable electricity powered carbon dioxide (CO2) reduction (eCO2R) to high-value fuels like methane (CH4) holds the potential to close the carbon cycle at meaningful scales. However, this kinetically staggered 8-electron multistep reduction still suffers from inadequate catalytic efficiency and current density. Atomic Cu-structures can boost eCO2R-to-CH4 selectivity due to enhanced intermediate binding energies (BEs) resulting from favorably shifted d-band centers. Herein, we exploit two-dimensional carbon nitride (CN) matrices, viz. Na-polyheptazine (PHI) and Li-polytriazine imides (PTI), to host Cu-N2 type single atom sites with high density (∼1.5 at%), via a facile metal ion exchange process. Optimized Cu loading in nanocrystalline Cu-PTI maximizes eCO2R-to-CH4 performance with Faradaic efficiency (FECH4) of ≈68% and a high partial current density of 348 mA cm−2 at a low potential of -0.84 V versus RHE, surpassing the state-of-the-art catalysts. Multi-Cu substituted N-appended nanopores in the CN frameworks yield thermodynamically stable quasi-dual/triple sites with large interatomic distances dictated by the pore dimensions. First-principles calculations elucidate the relative Cu-CN cooperative effects between the two matrices and how the Cu-Cu distance and local environment dictate the adsorbate BEs, density of states, and CO2-to-CH4 energy profile landscape. The 9N pores in Cu-PTI yield cooperative Cu-Cu sites that synergistically enhance the kinetics of the rate-limiting steps in the eCO2R-to-CH4 pathway.

Cooperative Copper Single Atom Catalyst in Two-dimensional Carbon Nitride for Enhanced CO2 Electrolysis to Methane from Pawan Kumar

]]> 45 0 https://cdn.slidesharecdn.com/ss_thumbnails/advancedmaterials-2023-roy-230910170832-2e505610-thumbnail.jpg?width=120&height=120&fit=bounds document Black http://activitystrea.ms/schema/1.0/post

http://activitystrea.ms/schema/1.0/posted

0 Bioinspired multimetal electrocatalyst for selective methane oxidation /slideshow/bioinspired-multimetal-electrocatalyst-for-selective-methane-oxidation/260775776 1-s2-230910170553-5abd76d9
Selective partial electrooxidation of methane (CH4) to liquid oxygenates has been a long-sought goal. However, the high activation energy of C–H bonds and competing oxygen evolution reaction limit product selectivity and reaction rates. Inspired by iron (IV)-oxo containing metalloenzymes’ functionality to activate the C–H bond, here we report on the design of a copper-iron-nickel catalyst for selective oxidation of CH4 to formate via a peroxide-assisted pathway. Each catalyst serves a specific role which is confirmed via electrochemical, in situ, and theoretical studies. A combination of electrochemical and in situ spectroelectrochemical studies revealed that H2O2 oxidation on nickel led to the formation of active oxygen species which trigger the formation of iron (IV) at low voltages. Density functional theory analysis helped reveal the role of iron (IV)-oxo species in reducing the activation energy barrier for CH4 deprotonation and the critical role of copper to suppress overoxidation. Our multimetal catalyst exhibits a formate faradaic efficiency of 42% at an applied potential of 0.9 V versus a reversible hydrogen electrode.]]>
Selective partial electrooxidation of methane (CH4) to liquid oxygenates has been a long-sought goal. However, the high activation energy of C–H bonds and competing oxygen evolution reaction limit product selectivity and reaction rates. Inspired by iron (IV)-oxo containing metalloenzymes’ functionality to activate the C–H bond, here we report on the design of a copper-iron-nickel catalyst for selective oxidation of CH4 to formate via a peroxide-assisted pathway. Each catalyst serves a specific role which is confirmed via electrochemical, in situ, and theoretical studies. A combination of electrochemical and in situ spectroelectrochemical studies revealed that H2O2 oxidation on nickel led to the formation of active oxygen species which trigger the formation of iron (IV) at low voltages. Density functional theory analysis helped reveal the role of iron (IV)-oxo species in reducing the activation energy barrier for CH4 deprotonation and the critical role of copper to suppress overoxidation. Our multimetal catalyst exhibits a formate faradaic efficiency of 42% at an applied potential of 0.9 V versus a reversible hydrogen electrode.]]> Sun, 10 Sep 2023 17:05:52 GMT /slideshow/bioinspired-multimetal-electrocatalyst-for-selective-methane-oxidation/260775776 pawankumar325@slideshare.net(pawankumar325) Bioinspired multimetal electrocatalyst for selective methane oxidation pawankumar325 Selective partial electrooxidation of methane (CH4) to liquid oxygenates has been a long-sought goal. However, the high activation energy of C–H bonds and competing oxygen evolution reaction limit product selectivity and reaction rates. Inspired by iron (IV)-oxo containing metalloenzymes’ functionality to activate the C–H bond, here we report on the design of a copper-iron-nickel catalyst for selective oxidation of CH4 to formate via a peroxide-assisted pathway. Each catalyst serves a specific role which is confirmed via electrochemical, in situ, and theoretical studies. A combination of electrochemical and in situ spectroelectrochemical studies revealed that H2O2 oxidation on nickel led to the formation of active oxygen species which trigger the formation of iron (IV) at low voltages. Density functional theory analysis helped reveal the role of iron (IV)-oxo species in reducing the activation energy barrier for CH4 deprotonation and the critical role of copper to suppress overoxidation. Our multimetal catalyst exhibits a formate faradaic efficiency of 42% at an applied potential of 0.9 V versus a reversible hydrogen electrode. <img style="border:1px solid #C3E6D8;float:right;" alt="" src="https://cdn.slidesharecdn.com/ss_thumbnails/1-s2-230910170553-5abd76d9-thumbnail.jpg?width=120&height=120&fit=bounds" /> Selective partial electrooxidation of methane (CH4) to liquid oxygenates has been a long-sought goal. However, the high activation energy of C–H bonds and competing oxygen evolution reaction limit product selectivity and reaction rates. Inspired by iron (IV)-oxo containing metalloenzymes’ functionality to activate the C–H bond, here we report on the design of a copper-iron-nickel catalyst for selective oxidation of CH4 to formate via a peroxide-assisted pathway. Each catalyst serves a specific role which is confirmed via electrochemical, in situ, and theoretical studies. A combination of electrochemical and in situ spectroelectrochemical studies revealed that H2O2 oxidation on nickel led to the formation of active oxygen species which trigger the formation of iron (IV) at low voltages. Density functional theory analysis helped reveal the role of iron (IV)-oxo species in reducing the activation energy barrier for CH4 deprotonation and the critical role of copper to suppress overoxidation. Our multimetal catalyst exhibits a formate faradaic efficiency of 42% at an applied potential of 0.9 V versus a reversible hydrogen electrode.

Bioinspired multimetal electrocatalyst for selective methane oxidation from Pawan Kumar

]]> 26 0 https://cdn.slidesharecdn.com/ss_thumbnails/1-s2-230910170553-5abd76d9-thumbnail.jpg?width=120&height=120&fit=bounds document Black http://activitystrea.ms/schema/1.0/post

http://activitystrea.ms/schema/1.0/posted

0 https://cdn.slidesharecdn.com/profile-photo-pawankumar325-48x48.jpg?cb=1731307447 choudhary2486pawan.wixsite.com/pawankumar https://cdn.slidesharecdn.com/ss_thumbnails/afmkumaretal2024-240320020920-8e67a00a-thumbnail.jpg?width=320&height=320&fit=bounds slideshow/isolated-iridium-sites-on-potassiumdoped-carbonnitride-wrapped-tellurium-nanostructures-for-enhanced-glycerol-photooxidation-c40e/266876229 Isolated Iridium Sites... https://cdn.slidesharecdn.com/ss_thumbnails/advfunctmaterials-2024-kumar-isolatediridiumsitesonpotassiumdopedcarbonnitridewrappedtellurium-240319144356-2529d9e0-thumbnail.jpg?width=320&height=320&fit=bounds slideshow/isolated-iridium-sites-on-potassiumdoped-carbonnitride-wrapped-tellurium-nanostructures-for-enhanced-glycerol-photooxidation-5699/266868360 Isolated Iridium Sites... https://cdn.slidesharecdn.com/ss_thumbnails/adfm202313793-sup-0001-suppmat-240319144249-284757dd-thumbnail.jpg?width=320&height=320&fit=bounds slideshow/isolated-iridium-sites-on-potassiumdoped-carbonnitride-wrapped-tellurium-nanostructures-for-enhanced-glycerol-photooxidation/266868339 Isolated Iridium Sites...