Building specification
Download as pptx, pdf8 likes2,844 views
This document provides specifications for white washing and color washing building surfaces. It outlines how to properly erect scaffolding and prepare various surfaces. It describes the process for preparing lime wash, including ingredients and application methods. Finally, it specifies that for new work, 3 or more coats of white wash should be applied until a smooth, uniform finish is achieved and that color washes require a sample to be approved before application.
1 of 7
Downloaded 112 times
Ad
Recommended
specification of Rcc
specification of RccPrabhat chhirolya
油
The document discusses reinforced cement concrete (RCC), including its history, materials, specifications, and advantages/disadvantages. RCC uses steel reinforcement embedded in concrete to resist tensile, shear, and sometimes compressive stresses. Fran巽ois Coignet is considered a pioneer of RCC, building the first reinforced concrete structure in 1853. Proper proportions and mixing of cement, aggregates like sand and gravel, and water are needed to produce durable concrete. Precast concrete involves casting pieces off-site then transporting them for assembly.Bye laws
Bye lawsRCNandish
油
This document provides an overview of building bye laws in India. It discusses that building construction varies by region depending on factors like materials, labor, and weather. Bye laws establish rules and regulations to maintain proper ventilation, privacy, and safety between neighbors. They define restrictions on building construction set by local authorities regarding setbacks, open spaces, heights, and more. The objectives are to allow orderly development while protecting safety, providing efficient use of space, and ensuring occupant health and comfort. Various terms and requirements related to setbacks, heights, room sizes, floor area ratios, and lighting/ventilation are also outlined.Terrazzo flooring and PCC flooring
Terrazzo flooring and PCC flooringShubhamRai1305
油
Presentation By Students Of Delhi Technical campus.
Topic Covered flooring, its purpose, Terrazzo flooring, PCC flooringAdvanced Building Materials
Advanced Building MaterialsSrishti Mehta
油
The document provides an introduction to advanced building materials. It discusses how materials are becoming more intelligent, interactive and responsive. It then classifies advanced building materials into intelligent materials that can sense and respond on their own, and interactive materials that require external commands to function. The document lists several material trends and properties of advanced materials, and outlines the aims and scope of studying these materials for sustainable construction. It provides examples of specific advanced materials like aerogel, lotusan paint and others, describing their composition, characteristics and applications.Pile foundations_Advanced Construction Technology
Pile foundations_Advanced Construction TechnologyA Makwana
油
Pile foundation is that type of deep foundation in which the loads are taken to a low level by means of vertical members which may be of timber, concrete or steel.TALL BUILDINGS
TALL BUILDINGSAbhijit Pal
油
DEMAND FOR TALL BUILDINGS
COURSE OF DEVELOPMENT OF TALL BUILDINGS
STRUCTURAL CONCERNS
CONSTRUCTION METHODS
FUTURE TALL BUILDINGS
ADVANCE FORMWORK SYSTEM
ADVANCE FORMWORK SYSTEMDeepak Verma
油
The document discusses various types of reinforcement and formwork materials used for speedy construction. It describes four main types of reinforcement - hot rolled deformed bars, mild steel plain bars, cold worked steel reinforcement, and pre-stressing steel. It also discusses four common formwork systems - table or flying formwork, column formwork, horizontal panel systems, and vertical panel systems. The formwork systems allow for faster construction through modular, engineered components that reduce time, costs, and waste compared to traditional formwork.Waffle or ribbed slab
Waffle or ribbed slabPritesh Parmar
油
Waffle slab or ribbed slab is a structural component with a flat top surface and grid-like bottom surface containing perpendicular ribs. It has two-directional reinforcement and is used for large spans to avoid many interior columns. The waffle shape is formed by placing pods on the formwork before pouring concrete, leaving ribs containing reinforcement. Waffle slabs provide stiff, lightweight structures suitable for areas requiring low deflection and vibration control like airports and hospitals.Flat slab design
Flat slab designMoussa Rili
油
This document provides details on the design and construction of flat slab structures. It discusses the benefits of flat slabs such as flexibility in layout, reduced building height and faster construction. Key considerations for design include wall and column placement, structural layout optimization, deflection checks, crack control and punching shear. Analysis involves dividing the slab into strips and determining moment and shear distributions. Reinforcement is arranged in two directions and detailing includes reinforcement lapping and service penetrations.Cavity walls
Cavity wallsRimpi Baro
油
Cavity walls consist of two masonry skins separated by a hollow space. The cavity serves to drain water out of the absorbent masonry skins through weep holes. Cavity wall insulation such as mineral wool, polystyrene beads, or urea formaldehyde foam is used to reduce heat loss by filling the air space. Wall ties connect the two skins to prevent separation, and are spaced according to building regulations. Weep holes above windows and doors allow moisture in the cavity to escape. Cavity walls provide advantages like insulation from sound and moisture, reduced heat transfer, and lower foundation loads.Specifications of rcc foundation 
Specifications of rcc foundation Prabhat chhirolya
油
The document discusses foundations, which are the part of a structure below ground level that transmits the load of the superstructure to the soil. It also discusses concrete mixes like M25 grade concrete, which has a specified 28-day compressive strength of 25 N/mm2. Finally, it provides specifications for excavation of foundations, removal of water from foundations, damp proof course installation, and precautions for designing foundations.Defects and remedies of building
Defects and remedies of buildingtoshi gupta
油
The document discusses common defects found in buildings such as cracks and dampness. It categorizes defects into pre-construction, during construction, and post-construction. Cracks can be structural or non-structural, and are caused by factors like drying shrinkage, thermal movement, elastic deformation, creep, chemical reactions, and foundation issues. Dampness is usually due to penetrating damp from gaps or rising damp without a proper damp proof course. Preventive measures include proper design, materials, construction practices, and addressing the root causes of defects.Wall finishes
Wall finishespadamatikona swapnika
油
Wall finishes provide decorative coverings for walls, ceilings and floors and conceal building components. Common internal wall finishes include plaster, paint, wallpaper, wood panelling, cement plaster, laminate, tiles and mirrors. Finishes are either self finishes that are inherent in the material or applied finishes that require application on site. Factors like intended use, maintenance needs and durability must be considered when selecting wall finishes. Proper application and allowing finishes to fully dry is important to prevent damage.Flat slab
Flat slabTarun kumar
油
Flat slabs are reinforced concrete slabs that are supported directly by columns without beams. They provide minimum depth, fast construction, and flexible column placement. There are four main types: slabs without drops and with column heads, slabs with drops and without column heads, slabs with both drops and column heads, and typical flat slabs. Column heads increase shear strength while drops increase shear strength and negative moment capacity. Flat slab systems can be either one-way or two-way depending on span ratios and load distribution. Advantages include simple formwork, no beams, and minimum depth, while disadvantages include potential interference from drops.Day lighting
Day lightingDeepak Thapa
油
This document discusses concepts and methods for daylighting buildings. It begins by stating that daylight is a renewable source of light that can save energy and create a comfortable environment when utilized for interior lighting. It then describes various daylighting design methods like the use of skylights, clerestories, light shelves, and building orientation. The document also notes some challenges of daylighting like increased heat gain and potential for glare. It provides guidance on daylighting design for different climates.Tall Buildings - Core Design
Tall Buildings - Core DesignYasser Mahgoub
油
The document discusses rules of thumb for determining the number of elevators needed in high-rise office buildings. It states that one elevator is required for every 45,000 square feet of usable space, and the ratio of floors to elevators should be between 2:1 and 2.5:1 depending on building occupancy. No single elevator group should serve more than 16 floors or include more than 8 elevators. Service elevators are required for buildings over 9 floors. Special areas like cafeterias may also increase elevator needs. Examples of institutional buildings in Thailand are provided.Long wall and short wall method 1
Long wall and short wall method 1Saiyyed Akbar
油
The procedure used to calculate quantities of various building item using long wall short wall method.Precast construction
Precast constructionDivya Vishnoi
油
This presentation include the precast construction, precast components , advantages and disadvantages, their connections.Retaining walls 
Retaining walls Rohan Narvekar
油
Retaining walls are used at the Shraddha Vivanta Residency construction site in Mumbai for two main purposes. Cantilever retaining walls around 3.5 meters deep allow for a basement and four floors of stacked parking underneath the residential building. Additional retaining walls surround underground water tanks for suction and firefighting. The walls are located along the building perimeter and around the tank areas. Proper waterproofing of the retaining walls is important given their underground locations.Construction Materials site visit report 
Construction Materials site visit report Batoul Alshamali
油
This document summarizes a student's site visit to a precast and prestressed concrete manufacturing facility. The objectives of the visit were to see how theoretical concrete knowledge applies practically, gain experience in materials science, and learn about new construction materials. During the visit, the student observed various production processes, equipment used, and curing methods. They asked questions about reinforcing precast concrete and insulating methods. In conclusion, the student determined that precast concrete is an efficient modern construction approach that saves time for large projects. Retaining wall 
Retaining wall kamariya keyur
油
This document provides an overview of different types of retaining walls, including gravity, cantilever, counterfort, sheet pile, and diaphragm walls. It discusses the key components and design considerations for gravity and cantilever retaining walls. Gravity walls rely on their own weight for stability, while cantilever walls consist of a vertical stem with a heel and toe slab acting as a cantilever beam. The document also covers lateral earth pressures, drainage of retaining walls, uses of sheet pile walls, and construction methods for diaphragm walls.Chapter 8 floorings
Chapter 8 flooringsKHUSHBU SHAH
油
This document discusses different types of flooring materials and their properties. It describes various flooring options like brick, flagstone, concrete, tile, wood, and terrazzo. The key factors that influence the selection of flooring materials are initial cost, appearance, durability, moisture resistance, sound and thermal insulation, fire resistance, and maintenance requirements. Different flooring types suit various needs based on their strengths and weaknesses. The document provides details on constructing and laying different flooring types like brick, concrete, tile and terrazzo floors.One Way Slabs
One Way SlabsGaurang Prajapati
油
This document discusses one way slabs. It defines one way slabs as slabs supported by beams on two opposite sides, with the load transferred to the two supports. For a slab to be considered one way, the ratio of its long side (ly) to short side (lx) must be greater than or equal to 2. Reinforcement in a one way slab is provided only along the short span direction. In contrast, two way slabs have reinforcement in both directions since for them ly/lx is less than 2. Other types of slabs discussed include flat slabs supported directly on columns and grid slabs supported within a column-free area by perimeter beams.SITE REPORT (PAD FOOTING)
SITE REPORT (PAD FOOTING)I'mMiss Lily
油
The document is a site visit report for a construction site building 96 terrace houses and related infrastructure. It includes an introduction to the site visit, objectives of the visit, observations of the site and construction processes, and photos from the visit. Specifically, it describes the pad footing foundation system being used, including excavating the ground, laying a lean concrete base, forming and reinforcing the pad, and pouring the concrete. The report concludes the visit provided valuable first-hand learning about construction site safety, materials, techniques and the pad footing construction process.Underpinning presentation chakamba
Underpinning presentation chakambaJohn Chakamba
油
This document discusses technical education and underpinning foundations. It begins with definitions of technical education and underpinning. Reasons for underpinning include new construction, structural issues, soil instability, and excavation. Common underpinning methods discussed include conventional pit method, jet grouting, micropiles, needle beams, cantilever needle beams, and underpinning railway bridges. The document emphasizes that underpinning requires expert design and execution to safely renovate structures and protect surrounding buildings.High rise construction
High rise constructionakkshay jawlekar
油
This whole ppt is about high rise construction... Having types..
why it is necessary.. and much more with literature study..
i hope u will like it..Prestressed concrete
Prestressed concreteUdisha15
油
this presentation is all about prestressing in concrete. Recommended for architecture students or anyone who wishes to know the basicsBricks
BricksGAURAV. H .TANDON
油
This document describes the properties of bricks, including their physical, mechanical, and thermal characteristics. It discusses the shape, size, color, density, compressive strength, insulation properties, durability, and frost resistance of standard bricks. It also outlines various tests conducted on bricks, such as those measuring compressive strength and water absorption. Additionally, it defines the qualities of good bricks and provides a classification system for bricks based on their characteristics and intended uses. Special types of bricks are also outlined, including those with modified shapes, perforations, and alternative compositions like sand lime bricks and refractory fire bricks.Unit 5 ACUTE, SUBACUTE,CHRONIC TOXICITY.pptx
Unit 5 ACUTE, SUBACUTE,CHRONIC TOXICITY.pptxMayuri Chavan
油
Unit 5 ACUTE, SUBACUTE,CHRONIC TOXICITY.pptx
Ad
More Related Content
What's hot (20)
Flat slab design
Flat slab designMoussa Rili
油
This document provides details on the design and construction of flat slab structures. It discusses the benefits of flat slabs such as flexibility in layout, reduced building height and faster construction. Key considerations for design include wall and column placement, structural layout optimization, deflection checks, crack control and punching shear. Analysis involves dividing the slab into strips and determining moment and shear distributions. Reinforcement is arranged in two directions and detailing includes reinforcement lapping and service penetrations.Cavity walls
Cavity wallsRimpi Baro
油
Cavity walls consist of two masonry skins separated by a hollow space. The cavity serves to drain water out of the absorbent masonry skins through weep holes. Cavity wall insulation such as mineral wool, polystyrene beads, or urea formaldehyde foam is used to reduce heat loss by filling the air space. Wall ties connect the two skins to prevent separation, and are spaced according to building regulations. Weep holes above windows and doors allow moisture in the cavity to escape. Cavity walls provide advantages like insulation from sound and moisture, reduced heat transfer, and lower foundation loads.Specifications of rcc foundation
Specifications of rcc foundation Prabhat chhirolya
油
The document discusses foundations, which are the part of a structure below ground level that transmits the load of the superstructure to the soil. It also discusses concrete mixes like M25 grade concrete, which has a specified 28-day compressive strength of 25 N/mm2. Finally, it provides specifications for excavation of foundations, removal of water from foundations, damp proof course installation, and precautions for designing foundations.Defects and remedies of building
Defects and remedies of buildingtoshi gupta
油
The document discusses common defects found in buildings such as cracks and dampness. It categorizes defects into pre-construction, during construction, and post-construction. Cracks can be structural or non-structural, and are caused by factors like drying shrinkage, thermal movement, elastic deformation, creep, chemical reactions, and foundation issues. Dampness is usually due to penetrating damp from gaps or rising damp without a proper damp proof course. Preventive measures include proper design, materials, construction practices, and addressing the root causes of defects.Wall finishes
Wall finishespadamatikona swapnika
油
Wall finishes provide decorative coverings for walls, ceilings and floors and conceal building components. Common internal wall finishes include plaster, paint, wallpaper, wood panelling, cement plaster, laminate, tiles and mirrors. Finishes are either self finishes that are inherent in the material or applied finishes that require application on site. Factors like intended use, maintenance needs and durability must be considered when selecting wall finishes. Proper application and allowing finishes to fully dry is important to prevent damage.Flat slab
Flat slabTarun kumar
油
Flat slabs are reinforced concrete slabs that are supported directly by columns without beams. They provide minimum depth, fast construction, and flexible column placement. There are four main types: slabs without drops and with column heads, slabs with drops and without column heads, slabs with both drops and column heads, and typical flat slabs. Column heads increase shear strength while drops increase shear strength and negative moment capacity. Flat slab systems can be either one-way or two-way depending on span ratios and load distribution. Advantages include simple formwork, no beams, and minimum depth, while disadvantages include potential interference from drops.Day lighting
Day lightingDeepak Thapa
油
This document discusses concepts and methods for daylighting buildings. It begins by stating that daylight is a renewable source of light that can save energy and create a comfortable environment when utilized for interior lighting. It then describes various daylighting design methods like the use of skylights, clerestories, light shelves, and building orientation. The document also notes some challenges of daylighting like increased heat gain and potential for glare. It provides guidance on daylighting design for different climates.Tall Buildings - Core Design
Tall Buildings - Core DesignYasser Mahgoub
油
The document discusses rules of thumb for determining the number of elevators needed in high-rise office buildings. It states that one elevator is required for every 45,000 square feet of usable space, and the ratio of floors to elevators should be between 2:1 and 2.5:1 depending on building occupancy. No single elevator group should serve more than 16 floors or include more than 8 elevators. Service elevators are required for buildings over 9 floors. Special areas like cafeterias may also increase elevator needs. Examples of institutional buildings in Thailand are provided.Long wall and short wall method 1
Long wall and short wall method 1Saiyyed Akbar
油
The procedure used to calculate quantities of various building item using long wall short wall method.Precast construction
Precast constructionDivya Vishnoi
油
This presentation include the precast construction, precast components , advantages and disadvantages, their connections.Retaining walls
Retaining walls Rohan Narvekar
油
Retaining walls are used at the Shraddha Vivanta Residency construction site in Mumbai for two main purposes. Cantilever retaining walls around 3.5 meters deep allow for a basement and four floors of stacked parking underneath the residential building. Additional retaining walls surround underground water tanks for suction and firefighting. The walls are located along the building perimeter and around the tank areas. Proper waterproofing of the retaining walls is important given their underground locations.Construction Materials site visit report
Construction Materials site visit report Batoul Alshamali
油
This document summarizes a student's site visit to a precast and prestressed concrete manufacturing facility. The objectives of the visit were to see how theoretical concrete knowledge applies practically, gain experience in materials science, and learn about new construction materials. During the visit, the student observed various production processes, equipment used, and curing methods. They asked questions about reinforcing precast concrete and insulating methods. In conclusion, the student determined that precast concrete is an efficient modern construction approach that saves time for large projects. Retaining wall
Retaining wall kamariya keyur
油
This document provides an overview of different types of retaining walls, including gravity, cantilever, counterfort, sheet pile, and diaphragm walls. It discusses the key components and design considerations for gravity and cantilever retaining walls. Gravity walls rely on their own weight for stability, while cantilever walls consist of a vertical stem with a heel and toe slab acting as a cantilever beam. The document also covers lateral earth pressures, drainage of retaining walls, uses of sheet pile walls, and construction methods for diaphragm walls.Chapter 8 floorings
Chapter 8 flooringsKHUSHBU SHAH
油
This document discusses different types of flooring materials and their properties. It describes various flooring options like brick, flagstone, concrete, tile, wood, and terrazzo. The key factors that influence the selection of flooring materials are initial cost, appearance, durability, moisture resistance, sound and thermal insulation, fire resistance, and maintenance requirements. Different flooring types suit various needs based on their strengths and weaknesses. The document provides details on constructing and laying different flooring types like brick, concrete, tile and terrazzo floors.One Way Slabs
One Way SlabsGaurang Prajapati
油
This document discusses one way slabs. It defines one way slabs as slabs supported by beams on two opposite sides, with the load transferred to the two supports. For a slab to be considered one way, the ratio of its long side (ly) to short side (lx) must be greater than or equal to 2. Reinforcement in a one way slab is provided only along the short span direction. In contrast, two way slabs have reinforcement in both directions since for them ly/lx is less than 2. Other types of slabs discussed include flat slabs supported directly on columns and grid slabs supported within a column-free area by perimeter beams.SITE REPORT (PAD FOOTING)
SITE REPORT (PAD FOOTING)I'mMiss Lily
油
The document is a site visit report for a construction site building 96 terrace houses and related infrastructure. It includes an introduction to the site visit, objectives of the visit, observations of the site and construction processes, and photos from the visit. Specifically, it describes the pad footing foundation system being used, including excavating the ground, laying a lean concrete base, forming and reinforcing the pad, and pouring the concrete. The report concludes the visit provided valuable first-hand learning about construction site safety, materials, techniques and the pad footing construction process.Underpinning presentation chakamba
Underpinning presentation chakambaJohn Chakamba
油
This document discusses technical education and underpinning foundations. It begins with definitions of technical education and underpinning. Reasons for underpinning include new construction, structural issues, soil instability, and excavation. Common underpinning methods discussed include conventional pit method, jet grouting, micropiles, needle beams, cantilever needle beams, and underpinning railway bridges. The document emphasizes that underpinning requires expert design and execution to safely renovate structures and protect surrounding buildings.High rise construction
High rise constructionakkshay jawlekar
油
This whole ppt is about high rise construction... Having types..
why it is necessary.. and much more with literature study..
i hope u will like it..Prestressed concrete
Prestressed concreteUdisha15
油
this presentation is all about prestressing in concrete. Recommended for architecture students or anyone who wishes to know the basicsBricks
BricksGAURAV. H .TANDON
油
This document describes the properties of bricks, including their physical, mechanical, and thermal characteristics. It discusses the shape, size, color, density, compressive strength, insulation properties, durability, and frost resistance of standard bricks. It also outlines various tests conducted on bricks, such as those measuring compressive strength and water absorption. Additionally, it defines the qualities of good bricks and provides a classification system for bricks based on their characteristics and intended uses. Special types of bricks are also outlined, including those with modified shapes, perforations, and alternative compositions like sand lime bricks and refractory fire bricks.Recently uploaded (20)
Unit 5 ACUTE, SUBACUTE,CHRONIC TOXICITY.pptx
Unit 5 ACUTE, SUBACUTE,CHRONIC TOXICITY.pptxMayuri Chavan
油
Unit 5 ACUTE, SUBACUTE,CHRONIC TOXICITY.pptxUPSA JUDGEMENT.pdfCopyright Infringement: High Court Rules against UPSA: A Wa...
UPSA JUDGEMENT.pdfCopyright Infringement: High Court Rules against UPSA: A Wa...businessweekghana
油
Copyright Infringement: High Court Rules against UPSA: A Wake-Up Call for Educational Institutions
YSPH VMOC Special Report - Measles Outbreak Southwest US 5-17-2025 .pptx
YSPH VMOC Special Report - Measles Outbreak Southwest US 5-17-2025 .pptxYale School of Public Health - The Virtual Medical Operations Center (VMOC)
油
As of 5/17/25, the Southwestern outbreak has 865 cases, including confirmed and pending cases across Texas, New Mexico, Oklahoma, and Kansas. Experts warn this is likely a severe undercount. The situation remains fluid, though we are starting to see a significant reduction in new cases in Texas. Experts project the outbreak could last up to a year.
CURRENT CASE COUNT: 865 (As of 5/17/2025)
- Texas: 720 (+2) (62% of cases are in Gaines County)
- New Mexico: 74 (+3) (92.4% of cases are from Lea County)
- Oklahoma: 17
- Kansas: 54 (38.89% of the cases are from Gray County)
HOSPITALIZATIONS: 102
- Texas: 93 - This accounts for 13% of all cases in Texas.
- New Mexico: 7 This accounts for 9.47% of all cases in New Mexico.
- Kansas: 2 - This accounts for 3.7% of all cases in Kansas.
DEATHS: 3
- Texas: 2 This is 0.28% of all cases
- New Mexico: 1 This is 1.35% of all cases
US NATIONAL CASE COUNT: 1,038 (Confirmed and suspected)
INTERNATIONAL SPREAD (As of 5/17/2025)
Mexico: 1,412 (+192)
- Chihuahua, Mexico: 1,363 (+171) cases, 1 fatality, 3 hospitalizations
Canada: 2,191 (+231) (Includes
Ontarios outbreak, which began in November 2024)
- Ontario, Canada 1,622 (+182), 101 (+18) hospitalizations
Dastur_ul_Amal under Jahangir Key Features.pptx
Dastur_ul_Amal under Jahangir Key Features.pptxomorfaruqkazi
油
Dastur_ul_Amal under Jahangir Key Features
The Dastur-ul-Amal (or Dasturul Amal) of Emperor Jahangir is a key administrative document from the Mughal period, particularly relevant during Jahangirs reign (16051627). The term "Dastur-ul-Amal" broadly translates to "manual of procedures" or "regulations for administration", and in Jahangirs context, it refers to his set of governance principles, administrative norms, and regulations for court officials and provincial administration.How to Share Accounts Between Companies in Odoo 18
How to Share Accounts Between Companies in Odoo 18Celine George
油
In this slide well discuss on how to share Accounts between companies in odoo 18. Sharing accounts between companies in Odoo is a feature that can be beneficial in certain scenarios, particularly when dealing with Consolidated Financial Reporting, Shared Services, Intercompany Transactions etc.How to Configure Extra Steps During Checkout in Odoo 18 Website
How to Configure Extra Steps During Checkout in Odoo 18 WebsiteCeline George
油
In this slide, well discuss on how to Configure Extra Steps During Checkout in Odoo 18 Website. Odoo website builder offers a flexible way to customize the checkout process. IPL QUIZ | THE QUIZ CLUB OF PSGCAS | 2025.pdf
IPL QUIZ | THE QUIZ CLUB OF PSGCAS | 2025.pdfQuiz Club of PSG College of Arts & Science
油
GUESS WHO'S HERE TO ENTERTAIN YOU DURING THE INNINGS BREAK OF IPL.
THE QUIZ CLUB OF PSGCAS BRINGS YOU A QUESTION SUPER OVER TO TRIUMPH OVER IPL TRIVIA.
GET BOWLED OR HIT YOUR MAXIMUM!
BI T畉P B畛 TR畛 TI畉NG ANH 9 THEO N V畛 BI H畛C - GLOBAL SUCCESS - 鏤C畉 NM (T畛...
BI T畉P B畛 TR畛 TI畉NG ANH 9 THEO N V畛 BI H畛C - GLOBAL SUCCESS - 鏤C畉 NM (T畛...Nguyen Thanh Tu Collection
油
https://app.box.com/s/yfwqwcillls0z4p34958pr8nj0b4udyrMental Health Assessment in 5th semester bsc. nursing and also used in 2nd ye...
Mental Health Assessment in 5th semester bsc. nursing and also used in 2nd ye...parmarjuli1412
油
Mental Health Assessment in 5th semester Bsc. nursing and also used in 2nd year GNM nursing. in included introduction, definition, purpose, methods of psychiatric assessment, history taking, mental status examination, psychological test and psychiatric investigation 
MCQS (EMERGENCY NURSING) DR. NASIR MUSTAFA
MCQS (EMERGENCY NURSING) DR. NASIR MUSTAFADr. Nasir Mustafa
油
MCQS (EMERGENCY NURSING) DR. NASIR MUSTAFAChemotherapy of Malignancy -Anticancer.pptx
Chemotherapy of Malignancy -Anticancer.pptxMayuri Chavan
油
Chemotherapy of Malignancy -Anticancer.pptxBotany Assignment Help Guide - Academic Excellence
Botany Assignment Help Guide - Academic Excellenceonline college homework help
油
Struggling with your botany assignments? This comprehensive guide is designed to support college students in mastering key concepts of plant biology. Whether you're dealing with plant anatomy, physiology, ecology, or taxonomy, this guide offers helpful explanations, study tips, and insights into how assignment help services can make learning more effective and stress-free.
What's Inside:
Introduction to Botany
Core Topics covered
Common Student Challenges
Tips for Excelling in Botany Assignments
Benefits of Tutoring and Academic Support
Conclusion and Next Steps
Perfect for biology students looking for academic support, this guide is a useful resource for improving grades and building a strong understanding of botany.
WhatsApp:- +91-9878492406
Email:- support@onlinecollegehomeworkhelp.com
Website:- https://onlinecollegehomeworkhelp.com/botany-homework-help
Conditions for Boltzmann Law Biophysics Lecture 際際滷
Conditions for Boltzmann Law Biophysics Lecture 際際滷PKLI-Institute of Nursing and Allied Health Sciences Lahore , Pakistan.
油
This presentation covers the conditions required for the application of Boltzmann Law, aimed at undergraduate nursing and allied health science students studying Biophysics. It explains the prerequisites for the validity of the law, including assumptions related to thermodynamic equilibrium, distinguishability of particles, and energy state distribution.
Ideal for students learning about molecular motion, statistical mechanics, and energy distribution in biological systems.
Module_2_Types_and_Approaches_of_Research (2).pptx
Module_2_Types_and_Approaches_of_Research (2).pptxdrroxannekemp
油
Module 2: Types and Approaches of Research
INDIA QUIZ FOR SCHOOLS | THE QUIZ CLUB OF PSGCAS | AUGUST 2024
INDIA QUIZ FOR SCHOOLS | THE QUIZ CLUB OF PSGCAS | AUGUST 2024Quiz Club of PSG College of Arts & Science
油
PREPARE FOR AN ALL-INDIA ODYSSEY!
THE QUIZ CLUB OF PSGCAS BRINGS YOU A QUIZ FROM THE PEAKS OF KASHMIR TO THE SHORES OF KUMARI AND FROM THE DHOKLAS OF KATHIAWAR TO THE TIGERS OF BENGAL.
QM: EIRAIEZHIL R K, THE QUIZ CLUB OF PSGCASClassification of mental disorder in 5th semester bsc. nursing and also used ...
Classification of mental disorder in 5th semester bsc. nursing and also used ...parmarjuli1412
油
Classification of mental disorder in 5th semester Bsc. Nursing and also used in 2nd year GNM Nursing Included topic is ICD-11, DSM-5, INDIAN CLASSIFICATION, Geriatric-psychiatry, review of personality development, different types of theory, defense mechanism, etiology and bio-psycho-social factors, ethics and responsibility, responsibility of mental health nurse, practice standard for MHN, CONCEPTUAL MODEL and role of nurse, preventive psychiatric and rehabilitation, Psychiatric rehabilitation, YSPH VMOC Special Report - Measles Outbreak Southwest US 5-17-2025 .pptx
YSPH VMOC Special Report - Measles Outbreak Southwest US 5-17-2025 .pptxYale School of Public Health - The Virtual Medical Operations Center (VMOC)
油
BI T畉P B畛 TR畛 TI畉NG ANH 9 THEO N V畛 BI H畛C - GLOBAL SUCCESS - 鏤C畉 NM (T畛...
BI T畉P B畛 TR畛 TI畉NG ANH 9 THEO N V畛 BI H畛C - GLOBAL SUCCESS - 鏤C畉 NM (T畛...Nguyen Thanh Tu Collection
油
Conditions for Boltzmann Law Biophysics Lecture 際際滷
Conditions for Boltzmann Law Biophysics Lecture 際際滷PKLI-Institute of Nursing and Allied Health Sciences Lahore , Pakistan.
油
INDIA QUIZ FOR SCHOOLS | THE QUIZ CLUB OF PSGCAS | AUGUST 2024
INDIA QUIZ FOR SCHOOLS | THE QUIZ CLUB OF PSGCAS | AUGUST 2024Quiz Club of PSG College of Arts & Science
油
Ad
Building specification
- 1. SUBMITTED BY:- GAURI RAJ SWATI GOEL BUILDING SPECIFICATION WHITE WASH AND COLOUR WASH
- 2. WHITE WASHING Scaffolding It shall be erected on double supports tied together by horizontal pieces over which scaffolding shall be fixed. Scaffolding shall rest on the surface which is been white washed. Scaffolding should be sound and strong. For ceiling proper stage scaffolding shall Be erected.
- 3. Preparation of surface Then surface shall be thoroughly brushed free from mortar droppings and foreign material. In case of old surface the surface should be thoroughly scraped of and holes in plaster shall be filled up with mortar. The surface shall then be allowed to dry for at least 48hrs before white washing is done.
- 4. PREPARATION OF LIME WASH The lime wash shall be prepared from fresh white lime stone the lime shall be thoroughly slaked ,mixed, stirred with sufficient water to make a thin cream. Now shall be allowed to stand for 24hrs then shall be screened through a clean course cloth. 40 gram of gum dissolved in hot water, shall be added to each 10 cubic decimeters of the cream. Approx quantity: 5:1 where 5 is water 1 is for 1kg of lime. Indigo up to 3gm per kg of lime is dissolved in water and stirred well. Water shall then be added at a rate of about 5 liters/kg of lime.
- 6. APPLICATION White wash shall be applied with moonj brushes. The operation for each coat shall consist of stroke given from top downwards and other from bottom upwards over the first stroke and similarly one stroke horizontally from right and another from the left before it dries. for new work 3 or more coats shall be applied till the surface presents a smooth and uniform finish. For old work single coat or 2 or more coats shall be applied.
- 7. COLOUR WASH The mineral colors shall be added to white wash. No color wash shall be done un till a sample of color wash of the required tint or shade has been got approved from the interior in charge. Color shall be even over the whole surface. For new work 2 or more coats: smooth surface For old work: repairing of surface: two or more coat surface shall present a uniform finish. For new work the priming coat shall be of white wash The rate shall be for a unit of 1 sq.m