This document provides three certificates of employment for Muhammad Aamir Shahzad. The certificates are from M/S.Descon Engineering LLC in Qatar, Technip in Abu Dhabi, and Descon Engineering in Abu Dhabi, certifying that Mr. Shahzad worked as an electrical inspector and QC inspector from 2012 to 2010. The certificates praise his job performance and contributions to various projects.
This certificate confirms that Mr. Murtuza Noor Uddin Karlawala worked as an Engineer (Networks) for KNETCOI HR from February 9, 2008 to November 15, 2009. During his employment, he ensured quality control and timely completion of G8M installation and commissioning projects in the region. The VP of HR provided this certificate at Mr. Karlawala's request and states that the company is satisfied with his work and found him capable of discharging his duties as an engineer for wireless networks efficiently and with honesty.
Sujoy Koley worked as an Engineer (Civil) for Larsen and Toubro Limited in their Construction - Metallurgical Material Handling unit in Kolkata from July 25, 2013 until resigning from the position on February 8, 2016. At the time of his resignation, Sujoy Koley held the grade of Supervisory I and received this service certificate from Larsen and Toubro Limited to document his employment history with the company.
Mr. Akash Naik worked as a Project Engineer at NriA) r V T . LTD. from January 13, 2014 to July 31, 2014. He was involved in designing and executing projects involving special purpose equipment and automation. The company found his performance to be very good and that he was diligent and hard working. He has now left the company of his own accord to pursue better prospects, and the company wishes him the best in his future endeavors.
Peter Dylan worked as a Safety Supervisor at Engineers and Contractors in Kochi, Kerala, India from August 2006 to May 2008. The letter certifies that during this time, Peter was found to be hardworking, sincere, honest and had excellent conduct. The letter wishes Peter all success in his future endeavors.
Mr. Muhammad Zubair Noor worked as a QA/QC Engineer for Engin (Pvt) Ltd from March 16, 2014 to present on two construction projects for the Pakistan Atomic Energy Commission: 1) Construction of SR, RS & EM Building for C-3/C-4 in Chashma, and 2) Construction of Internal Roads, Foot Paths, Fencing, and Covered Walkways for C-3/C-4 in Chashma. The project manager found him to be efficient, hard working, and dedicated, able to work in tough conditions and independently according to technical specifications.
This certificate verifies that Ahmed Mohamed Marouf worked for Archirodon Construction (Overseas) Co. as an Equipment Plant Engineer from July 2008 to September 2015 and as a Workshop Manager from September 2015 to April 2016. As Workshop Manager, Ahmed was responsible for preventative maintenance, routine maintenance, troubleshooting, and repairs of equipment according to manufacturer specifications and safety standards. Ahmed proved himself to be competent, reliable, and able to perform his duties professionally, earning the trust and respect of colleagues. The certificate was issued at Ahmed's request and does not obligate the company in any way.
Mr. Mohamad Danish Anis completed a summer internship at various departments of AYTB Company from June to September 2014. During this time, his conduct and code was very good, and he showed remarkable interest in technical fields and sustainability in oil and gas industries. He demonstrated excellent communication skills along with strong technical knowledge and interpersonal skills required for modern industry standards. He was found to be sincere and hardworking during his training in AYTB's Safety and Security System, Engineering & Maintenance, Fabrication & Machine Shops, Quality Assurance and Control System, and Procurement & Ware Housing System departments.
This letter from Uttaron Technologies verifies that Taraque Mohammad Dostogir worked as an electrical engineer for the company from February 2012 to July 2015. As an engineer, his duties included electrical safety audits, designs, assessments, thermography work, and report making for various factories and organizations. The CEO wishes him success in future endeavors.
Mr. Ahmed Elkalshy Fahmy worked as the managing engineer for Nurol L.L.C from November 2007 to August 2009. During this time, he was responsible for managing the construction phase of the Khalidiya Palace Residential project and making sure milestones were met. He displayed rapid and creative problem-solving skills, worked cooperatively with colleagues, and helped accomplish tasks entrusted to the team. We wish him continued success in his career.
This certificate certifies that Arunraj J worked for HCL Technologies Ltd. from October 10, 2012 to July 11, 2014 as a Member Technical Staff. He left the company voluntarily. The certificate, issued on August 05, 2014, is signed by an authorized representative and verifies his employment period and role.
EDUARDO H. PARE WORK EXPERIENCE CERTIFICATE – LAHMEYER INTERNATIONAL QATAR (2...Eduardo H. Pare
Ìý
EDUARDO H. PARE WORK EXPERIENCE CERTIFICATE
LAHMEYER INTERNATIONAL QATAR (2011 - 2015)
QATAR POWER TRANSMISSION SYSTEM
EXPANSION PROJECTS - PHASE 10 SUBSTATIONS
KAHRAMAA CONTRACT/PART NO.
GTC/371B/2010, GTC/371C/2010, GTC/371D/2010
DOHA, QATAR
Paramount Industrial Piping Engineering - PIPE is a plant design and piping engineering firm located in Thrissur, Kerala. The document is a letter confirming that Rohith P R worked as a design engineer (piping) at the firm from May 2015 to June 2016. During his tenure, Rohith prepared material take-off sheets, piping isometric drawings, stress analyses using CAESAR II, and piping layouts using Aveva PDMS software. His last monthly salary was Rs. 15,000.
Mr. Akash Naik worked as a Project Engineer at NriA) r V T . LTD. from January 13, 2014 to July 31, 2014. He was involved in designing and executing projects involving special purpose equipment and automation. The company found his performance to be very good and that he was diligent and hard working. He has now left the company of his own accord to pursue better prospects, and the company wishes him the best in his future endeavors.
Peter Dylan worked as a Safety Supervisor at Engineers and Contractors in Kochi, Kerala, India from August 2006 to May 2008. The letter certifies that during this time, Peter was found to be hardworking, sincere, honest and had excellent conduct. The letter wishes Peter all success in his future endeavors.
Mr. Muhammad Zubair Noor worked as a QA/QC Engineer for Engin (Pvt) Ltd from March 16, 2014 to present on two construction projects for the Pakistan Atomic Energy Commission: 1) Construction of SR, RS & EM Building for C-3/C-4 in Chashma, and 2) Construction of Internal Roads, Foot Paths, Fencing, and Covered Walkways for C-3/C-4 in Chashma. The project manager found him to be efficient, hard working, and dedicated, able to work in tough conditions and independently according to technical specifications.
This certificate verifies that Ahmed Mohamed Marouf worked for Archirodon Construction (Overseas) Co. as an Equipment Plant Engineer from July 2008 to September 2015 and as a Workshop Manager from September 2015 to April 2016. As Workshop Manager, Ahmed was responsible for preventative maintenance, routine maintenance, troubleshooting, and repairs of equipment according to manufacturer specifications and safety standards. Ahmed proved himself to be competent, reliable, and able to perform his duties professionally, earning the trust and respect of colleagues. The certificate was issued at Ahmed's request and does not obligate the company in any way.
Mr. Mohamad Danish Anis completed a summer internship at various departments of AYTB Company from June to September 2014. During this time, his conduct and code was very good, and he showed remarkable interest in technical fields and sustainability in oil and gas industries. He demonstrated excellent communication skills along with strong technical knowledge and interpersonal skills required for modern industry standards. He was found to be sincere and hardworking during his training in AYTB's Safety and Security System, Engineering & Maintenance, Fabrication & Machine Shops, Quality Assurance and Control System, and Procurement & Ware Housing System departments.
This letter from Uttaron Technologies verifies that Taraque Mohammad Dostogir worked as an electrical engineer for the company from February 2012 to July 2015. As an engineer, his duties included electrical safety audits, designs, assessments, thermography work, and report making for various factories and organizations. The CEO wishes him success in future endeavors.
Mr. Ahmed Elkalshy Fahmy worked as the managing engineer for Nurol L.L.C from November 2007 to August 2009. During this time, he was responsible for managing the construction phase of the Khalidiya Palace Residential project and making sure milestones were met. He displayed rapid and creative problem-solving skills, worked cooperatively with colleagues, and helped accomplish tasks entrusted to the team. We wish him continued success in his career.
This certificate certifies that Arunraj J worked for HCL Technologies Ltd. from October 10, 2012 to July 11, 2014 as a Member Technical Staff. He left the company voluntarily. The certificate, issued on August 05, 2014, is signed by an authorized representative and verifies his employment period and role.
EDUARDO H. PARE WORK EXPERIENCE CERTIFICATE – LAHMEYER INTERNATIONAL QATAR (2...Eduardo H. Pare
Ìý
EDUARDO H. PARE WORK EXPERIENCE CERTIFICATE
LAHMEYER INTERNATIONAL QATAR (2011 - 2015)
QATAR POWER TRANSMISSION SYSTEM
EXPANSION PROJECTS - PHASE 10 SUBSTATIONS
KAHRAMAA CONTRACT/PART NO.
GTC/371B/2010, GTC/371C/2010, GTC/371D/2010
DOHA, QATAR
Paramount Industrial Piping Engineering - PIPE is a plant design and piping engineering firm located in Thrissur, Kerala. The document is a letter confirming that Rohith P R worked as a design engineer (piping) at the firm from May 2015 to June 2016. During his tenure, Rohith prepared material take-off sheets, piping isometric drawings, stress analyses using CAESAR II, and piping layouts using Aveva PDMS software. His last monthly salary was Rs. 15,000.