Rapier loom
Download as PPTX, PDF
18 likes20,390 views
The document discusses the rapier loom, a type of shuttleless weaving loom. A rapier loom uses finger-like carriers called rapiers to pull the weft yarn across the loom between the warp yarns. There are two main types - single rigid rapier looms, which use one long rapier across the full width, and double rigid rapier looms, which use two rapiers entering from opposite sides to transfer the weft yarn. Rapier looms can operate at high speeds up to 1300 meters of weft per minute. They are flexible and can weave a wide range of fabrics from light to heavy weights.
Rapier loom
- 1. Rapier Loom
- 2. MD SOHEL KHAN Department of Textile Engineering Port City International University
- 3. Loom 1.What is loom? Loom is a mechanical device which is used to produce woven fabric by the insertion of warp and weft yarn. In weaving technology ; loom is the principle mechanical device for weaving. Various types of loom are used for doing the weaving task. Various types of designed fabric are produced by changing the machine setting.
- 4. Types of Modern Loom Rapier Loom Projectile Loom Air Jet Loom Water Jet Loom Multiphase Loom
- 5. Rapier Loom Rapier loom is a shuttleless weaving loom in which the filling yarn is carried through the shed of warp yarns to the other side of the loom by finger like carriers called rapiers.
- 6. continued A rapier loom uses a rapier to pull the weft yarn across the loom. It can be a single rapier or double rapier. For a single rapier, a long rapier device is required to extend across the full width of warp. For a double rapier loom, two rapiers enter the shed from opposite sides of the loom and transfer the weft from one rapier head to the other near the centre of the loom The advantage of two rapier system is only 50% of the rapier movement is utilized in the weft insertion of single rapier loom
- 8. Single Rigid rapier The rigid rapier is a metal or composite bar usually with a circular cross section The rapier enters the shed from one side, picks up the tip of the weft yarn on the other side and passes it across the weaving machine whileretracting Single rapier carries the yarn in one way only and half of the rapier movement is wasted Rapier length is equal to the width of the weavingmachine Requires high mass and rigidity of the rapier - to ensure straight movement of the rapier head Single rapier machines are not popular
- 10. Continued. Advantage Problem of weft transfer does not arise and normal range of fabric can be woven. Disadvantage One movement of rapier is wasted. Loom speed is very slow. The maximum weft insertion rate is 400 m/min
- 12. Double Rigid Rapier Two rapiers enter the shed from the opposite sides and meet at thecenter. The double rapier weaving machines are subdividedinto: One-sided weft insertion. One rapier is the transmitting rapier the other is the taker rapier. Double-sided weft insertion. Each rapier acts alternately as the giver and the taker. The giver picks up the yarn from the accumulator at one side, brings it to the center of the shed, transfers it to the second rapier(taker). As the taker retracts, carries the yarn to the otherside. In a twin-rapier system, two rapiers move together from the same driving source, as is necessary in face-to-face (i.e., double-plush) weaving
- 14. Mechanism of Rapier loom A rapier is a rod or steel tape which carries the weft yarn. In the other end, the rapier connected to the control system. The rapier moves through the warp yarn by carrying weft yarn from one end to other. There are two types of rapier loom. One types of rapier loom consist a rapier in one end. The rapier is then retracted, leaving the new filling in the place. Other types of rapier also available, in which the rapier carries the weft yarn to the centre and the other rapier from the opposite side carries the weft yarn from the centre.
- 15. Continued. There are two types of rapier loom. One is flexible and other is rigid rapier loom. The rigid loom takes more space than rigid loom. Flexible rapier can be coiled, if it is too flexible than it will buckle. The double rapier is used more frequently than single rapier. A rapier machines can be operate at speeds up to 1300 meters of weft per minute. This type of rapier is efficient. The noise level is high because it speeds about 200 to 260 ppm.
- 16. Structure of rapier loom
- 17. Main parts 12.Crank shaft. 3.Bottom shaft. 4. Grippers tapes. 5. Rapier Loom Sensors. 6. Rapier Loom Cutters. 7. Rapier Loom Driving Wheel 8. Rapier Loom Tapes .Motor.
- 18. Features High on quality Low cost Stable weft insertion PLC Base control panel Rigid design
- 19. Continued. Specification of rapier weaving machine is given below Specifications Name Specifications Value Product Category Weaving Machine Category Loom rapier weaving machine Product Name Rapier Loom Machine Product Model According to Manufacturer Product Class New Origin China/India/Others Brand/Manufacturer Name of Manufacturer Agent In Bangladesh No/Yes Power 1.5~2.2kw
- 20. Specification Temperature Normal Certification SGS/Others Production Capacity 100 Set/Sets per Month Fidder 6/8 Droppers 10000pcs Work Width 2300 (mm) Warp Beam Diameter 600mm Drum Diameter 300mm Maximum Speed 280rpm Weft Insertion 160-180m/min Color Selection 6 color
- 21. Continued. Color Selection 6 color Spindle Number 392 Heald Frame 14 Motor Power 1.5 /2.0 Kw Dimension 4450*2300*3100mm Weight 3600kg Description The rapier transfer box build with the most helix gears is stable and dependable. Rear beam tension structure is used to balance tension of warp for high density fabrics
- 22. Advantage Less floor space requirement , spatial productivity is higher. Flexible rapier band are wound on wheels placed in semi-circular channels when they are withdrawn outside the shad, and the result is wide working widths up to 5m.
- 23. Disadvantages The warp threads should not be damages by the ribbed guides . Guiding system may lid the ink breakage due to not failure . Using fancy yarn in warp direction is almost impossible. Wasted movement.
- 24. End Product Very light fabrics with 20 GSM to heavy fabrics with around 850 GSM. Rapier machines are widely used for household textiles and industrial fabrics. Rapier machines are designed for universal uses like Weave classic Wool, Cotton, Man-made fibres, fine Silk and Fancy yarns.
- 25. Conclusion Rapier machines weave more rapidly than most shuttle machines but more slowly than most other projectile machines. An important advantage of rapier machines is their flexibility, which permits the laying of picks of different colours. They also weave yarns of any type of fibre and can weave fabrics up to 110 inches in width without modification.
- 26. THANK YOU