際際滷

際際滷Share a Scribd company logo

ProMIS Technical Specification

Haptica
Haptica

Technical Specification of the ProMIS Surgical Simulator including dimensions, weight, technical requirements, etc.

1 of 2
Downloaded 18 times
Technical Specification Co m pu ter Windows Vista; Dell OptiPlex 960 SFStandard Base Small Form Factor Chassis 17 touch-screen Elo 1000 Series 1715L - Flat panel display or equivalent; simulates the laparoscopic stacking unit view 60GB hard-drive or higher; 1GB RAM; 6800 GFORCE TOGO Graphics Card or equivalent Associated cables and documentation NOTE: Computers are identified with a specific Bodyform and are not interchangeable ProMIS Simulator Software Core System software Tracking system that tracks 5-13mm instruments with appropriate labelling and coating; tracks hand position and movement where the hand is wearing appropriate (purple nitrile) glove Graphics engine Integrated Diagnostics and SetUp software ProMIS Simulator Hardware Training Modules content and related software Learning Management System software (for user Bo d yf o rm records) Bodyform with model skin held in place by clamped Remote access and networking facility (optional) top; sliding drawer for placement of ProMIS Tasks. Three cameras inside the bodyform link to core software Surgical Training Modules enable tracking and measuring of real surgical instruments (and hand movements). Surgical Training Modules on ProMIS may use pure virtual Fixed cameras within the Bodyform linked to vision- reality or may require physical task trays or physical tracking system. anatomical models. LED light strips in bodyform provide lighting for surgical Where a Module is purely virtual, only software is tasks and procedures. provided and is installed on the PC. For Modules that use physical tasks and models, Task Trays are provided. The Til t Me c h an is m dimensions of Task Trays are given below. Detachable tilt mechanism fixed to base of bodyform; enables Bodyform to rotate and tilt to 45 degrees. Cam e ra Fisso articulated arm to support PromisCam; mounted and fixed to bodyform or standard bench. PromisCam, a model laparoscope that can be hand-held or fixed to the camera arm.
Technical Specification Dimensions Powe r Bodyform PC: standard 110V 230V ProMIS 3 Simulator bodyform: 48cm x 60cm x 28cm; 6kg Monitor: standard 110V-230V ProMIS 3 Simulator with tilt: 48cm x 60cm x 50cm; Bodyform: standard 110V 230V each 13.5kg evenly distributed Requires minimum one (max three) single phase Haptica Pedestal: 50cm x 50cm; 15kg (optional and to mains socket to draw electrical power within 2M of order only) simulator. (With one socket, use extension lead). Ergotron LCD Cart: 53cm x 42cm x 110cm; 28.2kg Normal ambient lighting required. (optional and to order only) No specific workspace lighting required. Dimensions of physical tasks are as follows: Basic Laparoscopic Skills Documentation 6 x Basic Skills trays 19.5cm x 17.5cm x .4 5cm Open Module tray 19.5cm x 17.5cm x .35cm User Manual Model Laparoscope: 31cm x .8cm Learning Management System Manual Storage unit Quick set-up guide A storage unit with 5 drawers is provided to hold Skills Trays Instrument marking Guide and various peripherals: 51.5cm x 50cm x 31cm Laparoscopic Procedures NOTE: Haptica reserves the right to substitute any of the LapAppendectomy Tray: 19.5cm x 17.5cm x 2.5cm above component parts with similar or equivalent parts. LapColectomy Tray: 19.5cm x 17.5cm x 4cm LapCholecystectomy Tray: 440mm x 32cm x 4cm LapNissen Fundoplication Tray: 19.5cm x 17.5cm x 6cm Surgical Instruments ProMIS requires real, non-sterile surgical instruments. The following are recommended: 45mm Linear Stapler 2 x 5mm Graspers, Scissors Clip Applicator Dissection Forceps Instruments are not supplied; a storage area of (9) x 13cm x 45cm is recommended. Peripherals and accessories Calibration Tray: 19.5cm x 17.5cm x 10cm An Instrument Marking Kit (for labelling instruments to facilitate tracking within the Bodyform) Storage Box: 17cm x 5.1cm x 2cm; 50 x labels designed for 5mm instruments; 50 x labels designed for 10-11mm instruments; 2 x marking caps to facilitate placement of labels.

More Related Content

ProMIS Technical Specification

  • 1. Technical Specification Co m pu ter Windows Vista; Dell OptiPlex 960 SFStandard Base Small Form Factor Chassis 17 touch-screen Elo 1000 Series 1715L - Flat panel display or equivalent; simulates the laparoscopic stacking unit view 60GB hard-drive or higher; 1GB RAM; 6800 GFORCE TOGO Graphics Card or equivalent Associated cables and documentation NOTE: Computers are identified with a specific Bodyform and are not interchangeable ProMIS Simulator Software Core System software Tracking system that tracks 5-13mm instruments with appropriate labelling and coating; tracks hand position and movement where the hand is wearing appropriate (purple nitrile) glove Graphics engine Integrated Diagnostics and SetUp software ProMIS Simulator Hardware Training Modules content and related software Learning Management System software (for user Bo d yf o rm records) Bodyform with model skin held in place by clamped Remote access and networking facility (optional) top; sliding drawer for placement of ProMIS Tasks. Three cameras inside the bodyform link to core software Surgical Training Modules enable tracking and measuring of real surgical instruments (and hand movements). Surgical Training Modules on ProMIS may use pure virtual Fixed cameras within the Bodyform linked to vision- reality or may require physical task trays or physical tracking system. anatomical models. LED light strips in bodyform provide lighting for surgical Where a Module is purely virtual, only software is tasks and procedures. provided and is installed on the PC. For Modules that use physical tasks and models, Task Trays are provided. The Til t Me c h an is m dimensions of Task Trays are given below. Detachable tilt mechanism fixed to base of bodyform; enables Bodyform to rotate and tilt to 45 degrees. Cam e ra Fisso articulated arm to support PromisCam; mounted and fixed to bodyform or standard bench. PromisCam, a model laparoscope that can be hand-held or fixed to the camera arm.
  • 2. Technical Specification Dimensions Powe r Bodyform PC: standard 110V 230V ProMIS 3 Simulator bodyform: 48cm x 60cm x 28cm; 6kg Monitor: standard 110V-230V ProMIS 3 Simulator with tilt: 48cm x 60cm x 50cm; Bodyform: standard 110V 230V each 13.5kg evenly distributed Requires minimum one (max three) single phase Haptica Pedestal: 50cm x 50cm; 15kg (optional and to mains socket to draw electrical power within 2M of order only) simulator. (With one socket, use extension lead). Ergotron LCD Cart: 53cm x 42cm x 110cm; 28.2kg Normal ambient lighting required. (optional and to order only) No specific workspace lighting required. Dimensions of physical tasks are as follows: Basic Laparoscopic Skills Documentation 6 x Basic Skills trays 19.5cm x 17.5cm x .4 5cm Open Module tray 19.5cm x 17.5cm x .35cm User Manual Model Laparoscope: 31cm x .8cm Learning Management System Manual Storage unit Quick set-up guide A storage unit with 5 drawers is provided to hold Skills Trays Instrument marking Guide and various peripherals: 51.5cm x 50cm x 31cm Laparoscopic Procedures NOTE: Haptica reserves the right to substitute any of the LapAppendectomy Tray: 19.5cm x 17.5cm x 2.5cm above component parts with similar or equivalent parts. LapColectomy Tray: 19.5cm x 17.5cm x 4cm LapCholecystectomy Tray: 440mm x 32cm x 4cm LapNissen Fundoplication Tray: 19.5cm x 17.5cm x 6cm Surgical Instruments ProMIS requires real, non-sterile surgical instruments. The following are recommended: 45mm Linear Stapler 2 x 5mm Graspers, Scissors Clip Applicator Dissection Forceps Instruments are not supplied; a storage area of (9) x 13cm x 45cm is recommended. Peripherals and accessories Calibration Tray: 19.5cm x 17.5cm x 10cm An Instrument Marking Kit (for labelling instruments to facilitate tracking within the Bodyform) Storage Box: 17cm x 5.1cm x 2cm; 50 x labels designed for 5mm instruments; 50 x labels designed for 10-11mm instruments; 2 x marking caps to facilitate placement of labels.