Intrond
Download as PPT, PDF0 likes842 views
The INTRON-D system can function as multiple systems, including a talk-back system, public address system, emergency annunciation system, and security/entertainment system. It offers redundancy options at both the system and component level. It has various interface capabilities that allow it to connect to devices like fire/gas detection systems and legacy paging. Installation of the INTRON-D does not require any proprietary cabling and its components are self-powered.
1 of 6
Downloaded 17 times
Recommended
Introndplus
IntrondplusIndustronic
Ìý
The document introduces the INTRON-D plus communication and emergency warning system. It has the following key features:
1. It is a networked and customizable system that can integrate with various network environments and support up to 250 distributed systems.
2. It provides functions like public address, general alarm, intercom, and integration with PBX systems.
3. It has a modular and customizable design that allows configurations to meet various regulatory standards and customer requirements.INTRON_D_eng_02_2012
INTRON_D_eng_02_2012Arie den Boer
Ìý
This document describes the INTRON-D plus digital communication system. It provides modular, flexible solutions for intercom, public address, and general alarm applications in industries like oil & gas, chemicals, mining, energy, and transportation. The system offers digital indoor and outdoor stations, a centralized rack, audio processors, and amplifiers to enable clear two-way communication, broadcasts to groups or zones, integration with other systems, and automated emergency warnings. Modular components and redundancy features help ensure system reliability and safety.Home automation using dtmf
Home automation using dtmfAjay Naidu Jami
Ìý
Using DTMF technology of a cellphone,one can control home appliances or other electrical things remotelyVideo Conferencing Standards
Video Conferencing StandardsVideoguy
Ìý
The document discusses videoconferencing standards defined by the ITU, including H.323, H.320, audio standards like G.711, video standards like H.261 and H.263, communication standards, and T.120 for data collaboration. It provides an overview of key standards, their components and functions, such as terminals, gatekeepers, and gateways in H.323.DTMF based Home Automation System
DTMF based Home Automation SystemDaksh Raj Chopra
Ìý
This document provides a training report for a 6-week internship at Appin Technology Lab on embedded systems. It includes an acknowledgment section thanking guides and mentors. The report then covers the company profile, project undertaken which was a DTMF controlled home automation system, introduction to the project explaining home automation, modular description of the system, design, coding, test cases, industry applications, and future enhancements. It also includes data sheets and sections on DTMF signaling technology.A2Z Control System
A2Z Control Systemzatinsinghal
Ìý
This document discusses DTMF technology and embedded systems. It begins with an overview of DTMF signals, history, and keypads. It then discusses embedded system components, characteristics, and differences from general computing platforms. Finally, it provides details on the hardware and overview of peripherals for an A2Z control system project using a microcontroller, DTMF encoder and decoder, relays, and other components.Global System for Mobile Communication Based Smart Home Security System
Global System for Mobile Communication Based Smart Home Security SystemIJERA Editor
Ìý
Home security system is needed for occupants' convenience and safety. In this paper, we present the design and implementation of an affordable, low power consumption, and GSM (Global System for Mobile Communication) based wireless home security system. In existing system, the home network is engaged with non-wireless technology, where the installation and maintenance is difficult. So the system cost is very high. In our proposed system, these difficulties are overcome by introducing a wireless home network which contains a GPRS Gateway and three kinds of security nodes namely door security node, anti intrusion node and SMS node to inform the user. The nodes are easy installing. All the three nodes are connected to the microcontroller.DTMF (Mobile) Based Automation
DTMF (Mobile) Based AutomationYogesh Kumar
Ìý
This document outlines the steps to design an electronic system for remote home appliance control. It discusses designing block diagrams, electronic circuits, using a Home Automation Control System (HACS) accessed by mobile phone or computer. It describes using DTMF and cell phone signals to send commands through a mobile network that are decoded by a microcontroller and used to interface with appliances through a 220VAC mains supply. The document provides block diagrams and illustrations of electronic circuits to implement a mobile remote control system for appliances.International Journal of Computational Engineering Research(IJCER)
International Journal of Computational Engineering Research(IJCER)ijceronline
Ìý
This document describes a mobile phone based system for remotely controlling multiple devices. The system uses cellular networks to transmit control signals from a mobile phone to a receiver connected to a PC and interface circuits. The PC program decodes the signals and sends commands to circuits controlling devices like motors, valves, levers, and sirens. The system integrates mobile and computing technologies to allow secure remote control of industrial and home appliances, reducing costs and manual labor.Motorola adp apps_catalogue_enduser_nov13 (1)
Motorola adp apps_catalogue_enduser_nov13 (1)Mohamed A. Gelil Radwan
Ìý
This document provides an introduction and overview of applications available through Motorola's MOTOTRBO Application Developer Program (ADP). It describes how the ADP allows third-party developers to create customized communication solutions that integrate with MOTOTRBO two-way radio systems. The document catalogs a wide range of available applications organized by category (e.g. control rooms, safety, radio infrastructure), describing their key features. It aims to help customers quickly identify applications that meet their needs to enhance communications beyond basic voice functionality.Ip network intercom system
Ip network intercom systemSimon Lin
Ìý
This document describes an IP/TCP network audio and intercom system for a prison. The system includes a PC server, paging consoles, intercom panels, adapters, and other equipment connected over a LAN. It allows two-way communication between staff in different areas like the electric room, duty room, and prisoner rooms. Key features include emergency calling, monitoring of surrounding areas, integration with other systems, and easy maintenance of the expandable 8,000 unit system.2n netstarsalesandtechnical1603
2n netstarsalesandtechnical1603Jihed Salhi
Ìý
Thank you for calling Star company. For sales, press 1. For technical support, press 2. For accounting, press 3.
2
For technical support, press 2.
Technical support group is being called.
3
For accounting, press 3.
Accounting group is being called.
0
To repeat the menu, press 0.
Welcome to the Star company. For sales, press 1. For technical support, press 2. For accounting, press 3.
The IVR system guides the caller to the required department.Dtmf based home automation system using microcontroller ppt
Dtmf based home automation system using microcontroller pptSree Sree
Ìý
This document describes a DTMF (Dual Tone Multi Frequency) based home automation system circuit. It consists of an ATmega8 microcontroller, HT9107B DTMF decoder IC, relays, and loads like lights and fans. The circuit allows controlling appliances remotely from a mobile phone by pressing buttons which generate tone pairs decoded by the HT9107B and sent to the microcontroller. When a button is pressed, the corresponding appliance is switched on or off. The system provides remote control of home devices but has limitations in the number of controllable appliances and synchronization issues.DTMF based home automation with ADRUINO
DTMF based home automation with ADRUINOFucck
Ìý
This document provides an overview of a project to develop a home automation system using Dual Tone Multi Frequency (DTMF) technology paired with wireless communication. Chapter 1 introduces DTMF technology and its use in telephone signaling. Chapter 2 discusses implementing the system using an Arduino Uno microcontroller and a DTMF decoder chip. It also describes using relays and a relay driver chip to control appliances. Chapter 3 states the problem is to allow remote control and monitoring of home appliances by cellular phone from anywhere.G3602050055
G3602050055ijceronline
Ìý
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.Dtmf based home appliance control 2
Dtmf based home appliance control 2Krish Karn
Ìý
This document describes a DTMF based home appliance control system using an 8051 microcontroller. The system uses DTMF tones sent over telephone lines to remotely control appliances connected to relays. When a user calls into the system and enters a DTMF code, the microcontroller decodes the tones using a DTMF decoder chip and triggers the corresponding relay to control the appliance. The system is designed to provide low-cost remote control and home security through dedicated passwords known only to authorized users.Embedded system demo
Embedded system demoSeshananda Reddy
Ìý
Embedded systems are electronic systems that perform dedicated functions within larger mechanical or electrical systems. This document provides an overview of embedded systems, including common components, applications in different domains, and the evolution of processors and controllers. It also lists the training programs offered by Arrowsol on embedded system design using microcontrollers, communication protocols, and real-time operating systems.Cell Phone Controlled Home Automation System using DTMF Technology
Cell Phone Controlled Home Automation System using DTMF TechnologyTaufique Sekh
Ìý
This home appliances control or home automation project uses DTMF decoder circuit to control home and office electrical appliances. Just connect your cell phone headset (headphone) jack to the mobile phone and then mobile will control electrical appliances and electrical equipment through the DTMF key pad of your cell phone. Here for demonstrating, we are controlling an electrical bulb using this circuit project but you can extend this circuit to control many electrical devices with some modifications using4×16 decoder IC.
Ap7131 government spec_sheet
Ap7131 government spec_sheetAdvantec Distribution
Ìý
The document provides specifications for the AP-7131-GR 802.11n adaptive services access point. It has the following key features:
- Provides unmatched security for federal and government agencies through FIPS 140-2 Level 2 validation and Common Criteria certification.
- Features dual-band radios that allow it to simultaneously support wireless access, mesh networking, and wireless intrusion prevention system sensing.
- Supports wireless speeds up to 600Mbps and can operate as either a standalone access point or centrally-managed access point for distributed networks.Controlling Home Appliances by using Universal Remote Control System (IoT and...
Controlling Home Appliances by using Universal Remote Control System (IoT and...IRJET Journal
Ìý
This document describes a system for controlling home appliances using a universal remote control over IoT and Bluetooth technologies. The system uses an ARM board connected to home appliances via the control box. An Android smartphone acts as the universal remote control and communicates with the ARM board and appliances wirelessly using IoT, Wi-Fi and Bluetooth. The system architecture includes the remote controller, target devices/appliances, and a software interface to generate control interfaces for different appliances on the remote. The system aims to provide simple control of multiple appliances using a single remote interface.Ap 7131-gr-ss-v4a-fip svalidated
Ap 7131-gr-ss-v4a-fip svalidatedAdvantec Distribution
Ìý
The document describes the AP-7131-GR, an 802.11n wireless access point that is the first to achieve FIPS 140-2 Level 2 validation. It has dual-band radios that allow it to simultaneously support wireless data, voice, video and wireless intrusion prevention system functionality. It provides high security for government agencies through its certifications and ability to perform around-the-clock wireless intrusion detection on both frequency bands using one of its radios. It simplifies deployment and reduces costs by integrating multiple networking functions into a single device.Home Automation using DTMF
Home Automation using DTMFPrashant Jaitly
Ìý
The document provides an overview of DKOP Labs Pvt. Ltd, which provides industrial training in areas such as VLSI design, software development, and embedded technology. It then discusses home automation and how it allows smart homes through centralized control of devices. Finally, it describes the objective of the project, which is to implement a low-cost, reliable home automation system using a microcontroller for hardware simplicity and SMS/voice dialing for remote control capabilities.Introduction to Government funded equipment (GFE)
Introduction to Government funded equipment (GFE)Udit Jain
Ìý
The project describes about the organization history, its areas of working and then focuses on one product, which is GFE. It talks in detail about the parts of GFE, working and the components which are attached to it for its proper working.embedded system bye Sj
embedded system bye SjnoT yeT woRkiNg !! iM stiLl stUdYinG !!
Ìý
The document summarizes topics related to an 8051 embedded system training seminar, including:
- An overview of embedded systems and their requirements for software like Keil uVision and hardware like the AT89C51 microcontroller.
- A description of the 8051 microcontroller's features like 4K ROM, 128 bytes RAM, and timers, as well as its pin diagram.
- Examples of embedded systems in daily life like digital clocks and traffic lights.
- Integrated circuits often used with microcontrollers like 78xx voltage regulators and L293D motor drivers.
- An example code and Proteus simulation of displaying "hello world" on an LCD.Voice Recognition Wireless Home Automation System Based On Zigbee
Voice Recognition Wireless Home Automation System Based On ZigbeeIOSR Journals
Ìý
This document describes a voice recognition wireless home automation system based on Zigbee. The system uses a microcontroller connected to a HM2007 speech recognition chip and Zigbee modules to allow voice control of home appliances from a base station. The base station takes voice commands from a microphone, which are processed by the HM2007 chip and sent via Zigbee to a remote station. The remote station then controls electrical devices and sensors and sends status information back to the base station display. The system is designed for elderly and disabled users to easily operate home automation with voice commands for security and convenience.Olo Cust Prez 
Olo Cust Prez guestd9a90f
Ìý
The document provides a high-level overview of the Olo River digital home platform:
1. The Olo River SoC includes an Intel XScale CPU, video and audio decoding/encoding capabilities, security features, graphics acceleration, memory interfaces, and peripheral interfaces.
2. The Olo Creek development board is a reference design for the Olo River SoC and includes features like memory, PCI/miniPCI slots, smart card interfaces, audio/video I/O, USB, Ethernet, and SATA.
3. The Olo River software architecture includes drivers, libraries and middleware to support features like graphics, audio, streaming media, and interfaces to external devices. Applications can use graphics APIs andFireFlyâ„¢: Evolving Mobile Device Platforms
FireFlyâ„¢: Evolving Mobile Device PlatformsInhand Electronics Incorporated
Ìý
InHand Electronics, Inc. is a leading provider of low-power embedded systems to Original Equipment Manufacturers of battery-operated handheld and wireless devices, such as UMPCs, PDAs, wearable computers, industrial computers, and smart sensors.wiretap brochure7
wiretap brochure7CaudalFin Technologies
Ìý
CaudalFin Technologies produces the WireTap voice logger product line. The WireTap boards can turn an ordinary computer into a digital voice logger for E1/T1/J1 trunks using Asterisk open source software. Key features include on-board DMA, support for multiple audio formats, high impedance recording, gain control, automatic cable detection, and an AMI interface. The WireTap provides lawful intercept and call monitoring capabilities at low cost using open source software and commodity hardware.Catálogo DDC con bus de datos y software para aeronáutica
Catálogo DDC con bus de datos y software para aeronáuticaMarketing Donalba
Ìý
This document provides an overview of Data Device Corporation (DDC), including its product areas, boards, and software. DDC was established in 1964 and specializes in data networking technologies like MIL-STD-1553, ARINC, Ethernet, and more for applications in military, aerospace, vehicles, and industrial markets. The document describes DDC's various boards and products that support these standards in form factors including PCI, PMC, USB, and more. It also outlines DDC's software which can operate devices in standalone, remote access, or protocol conversion modes.Bus de datos y Software de DDC
Bus de datos y Software de DDCMarketing Donalba
Ìý
This document provides an overview of Data Device Corporation's databus boards and software products. It describes DDC's history and facilities, their product areas including MIL-STD-1553, ARINC, and Ethernet devices. It also summarizes their various board form factors for applications including test/simulation, embedded, and portable, with options for 1553, ARINC, or multi-I/O interfaces. Floor plans and specifications are given for several of their computer platforms that support I/O expansion with DDC interface cards.More Related Content
What's hot (17)
International Journal of Computational Engineering Research(IJCER)
International Journal of Computational Engineering Research(IJCER)ijceronline
Ìý
This document describes a mobile phone based system for remotely controlling multiple devices. The system uses cellular networks to transmit control signals from a mobile phone to a receiver connected to a PC and interface circuits. The PC program decodes the signals and sends commands to circuits controlling devices like motors, valves, levers, and sirens. The system integrates mobile and computing technologies to allow secure remote control of industrial and home appliances, reducing costs and manual labor.Motorola adp apps_catalogue_enduser_nov13 (1)
Motorola adp apps_catalogue_enduser_nov13 (1)Mohamed A. Gelil Radwan
Ìý
This document provides an introduction and overview of applications available through Motorola's MOTOTRBO Application Developer Program (ADP). It describes how the ADP allows third-party developers to create customized communication solutions that integrate with MOTOTRBO two-way radio systems. The document catalogs a wide range of available applications organized by category (e.g. control rooms, safety, radio infrastructure), describing their key features. It aims to help customers quickly identify applications that meet their needs to enhance communications beyond basic voice functionality.Ip network intercom system
Ip network intercom systemSimon Lin
Ìý
This document describes an IP/TCP network audio and intercom system for a prison. The system includes a PC server, paging consoles, intercom panels, adapters, and other equipment connected over a LAN. It allows two-way communication between staff in different areas like the electric room, duty room, and prisoner rooms. Key features include emergency calling, monitoring of surrounding areas, integration with other systems, and easy maintenance of the expandable 8,000 unit system.2n netstarsalesandtechnical1603
2n netstarsalesandtechnical1603Jihed Salhi
Ìý
Thank you for calling Star company. For sales, press 1. For technical support, press 2. For accounting, press 3.
2
For technical support, press 2.
Technical support group is being called.
3
For accounting, press 3.
Accounting group is being called.
0
To repeat the menu, press 0.
Welcome to the Star company. For sales, press 1. For technical support, press 2. For accounting, press 3.
The IVR system guides the caller to the required department.Dtmf based home automation system using microcontroller ppt
Dtmf based home automation system using microcontroller pptSree Sree
Ìý
This document describes a DTMF (Dual Tone Multi Frequency) based home automation system circuit. It consists of an ATmega8 microcontroller, HT9107B DTMF decoder IC, relays, and loads like lights and fans. The circuit allows controlling appliances remotely from a mobile phone by pressing buttons which generate tone pairs decoded by the HT9107B and sent to the microcontroller. When a button is pressed, the corresponding appliance is switched on or off. The system provides remote control of home devices but has limitations in the number of controllable appliances and synchronization issues.DTMF based home automation with ADRUINO
DTMF based home automation with ADRUINOFucck
Ìý
This document provides an overview of a project to develop a home automation system using Dual Tone Multi Frequency (DTMF) technology paired with wireless communication. Chapter 1 introduces DTMF technology and its use in telephone signaling. Chapter 2 discusses implementing the system using an Arduino Uno microcontroller and a DTMF decoder chip. It also describes using relays and a relay driver chip to control appliances. Chapter 3 states the problem is to allow remote control and monitoring of home appliances by cellular phone from anywhere.G3602050055
G3602050055ijceronline
Ìý
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.Dtmf based home appliance control 2
Dtmf based home appliance control 2Krish Karn
Ìý
This document describes a DTMF based home appliance control system using an 8051 microcontroller. The system uses DTMF tones sent over telephone lines to remotely control appliances connected to relays. When a user calls into the system and enters a DTMF code, the microcontroller decodes the tones using a DTMF decoder chip and triggers the corresponding relay to control the appliance. The system is designed to provide low-cost remote control and home security through dedicated passwords known only to authorized users.Embedded system demo
Embedded system demoSeshananda Reddy
Ìý
Embedded systems are electronic systems that perform dedicated functions within larger mechanical or electrical systems. This document provides an overview of embedded systems, including common components, applications in different domains, and the evolution of processors and controllers. It also lists the training programs offered by Arrowsol on embedded system design using microcontrollers, communication protocols, and real-time operating systems.Cell Phone Controlled Home Automation System using DTMF Technology
Cell Phone Controlled Home Automation System using DTMF TechnologyTaufique Sekh
Ìý
This home appliances control or home automation project uses DTMF decoder circuit to control home and office electrical appliances. Just connect your cell phone headset (headphone) jack to the mobile phone and then mobile will control electrical appliances and electrical equipment through the DTMF key pad of your cell phone. Here for demonstrating, we are controlling an electrical bulb using this circuit project but you can extend this circuit to control many electrical devices with some modifications using4×16 decoder IC.
Ap7131 government spec_sheet
Ap7131 government spec_sheetAdvantec Distribution
Ìý
The document provides specifications for the AP-7131-GR 802.11n adaptive services access point. It has the following key features:
- Provides unmatched security for federal and government agencies through FIPS 140-2 Level 2 validation and Common Criteria certification.
- Features dual-band radios that allow it to simultaneously support wireless access, mesh networking, and wireless intrusion prevention system sensing.
- Supports wireless speeds up to 600Mbps and can operate as either a standalone access point or centrally-managed access point for distributed networks.Controlling Home Appliances by using Universal Remote Control System (IoT and...
Controlling Home Appliances by using Universal Remote Control System (IoT and...IRJET Journal
Ìý
This document describes a system for controlling home appliances using a universal remote control over IoT and Bluetooth technologies. The system uses an ARM board connected to home appliances via the control box. An Android smartphone acts as the universal remote control and communicates with the ARM board and appliances wirelessly using IoT, Wi-Fi and Bluetooth. The system architecture includes the remote controller, target devices/appliances, and a software interface to generate control interfaces for different appliances on the remote. The system aims to provide simple control of multiple appliances using a single remote interface.Ap 7131-gr-ss-v4a-fip svalidated
Ap 7131-gr-ss-v4a-fip svalidatedAdvantec Distribution
Ìý
The document describes the AP-7131-GR, an 802.11n wireless access point that is the first to achieve FIPS 140-2 Level 2 validation. It has dual-band radios that allow it to simultaneously support wireless data, voice, video and wireless intrusion prevention system functionality. It provides high security for government agencies through its certifications and ability to perform around-the-clock wireless intrusion detection on both frequency bands using one of its radios. It simplifies deployment and reduces costs by integrating multiple networking functions into a single device.Home Automation using DTMF
Home Automation using DTMFPrashant Jaitly
Ìý
The document provides an overview of DKOP Labs Pvt. Ltd, which provides industrial training in areas such as VLSI design, software development, and embedded technology. It then discusses home automation and how it allows smart homes through centralized control of devices. Finally, it describes the objective of the project, which is to implement a low-cost, reliable home automation system using a microcontroller for hardware simplicity and SMS/voice dialing for remote control capabilities.Introduction to Government funded equipment (GFE)
Introduction to Government funded equipment (GFE)Udit Jain
Ìý
The project describes about the organization history, its areas of working and then focuses on one product, which is GFE. It talks in detail about the parts of GFE, working and the components which are attached to it for its proper working.embedded system bye Sj
embedded system bye SjnoT yeT woRkiNg !! iM stiLl stUdYinG !!
Ìý
The document summarizes topics related to an 8051 embedded system training seminar, including:
- An overview of embedded systems and their requirements for software like Keil uVision and hardware like the AT89C51 microcontroller.
- A description of the 8051 microcontroller's features like 4K ROM, 128 bytes RAM, and timers, as well as its pin diagram.
- Examples of embedded systems in daily life like digital clocks and traffic lights.
- Integrated circuits often used with microcontrollers like 78xx voltage regulators and L293D motor drivers.
- An example code and Proteus simulation of displaying "hello world" on an LCD.Voice Recognition Wireless Home Automation System Based On Zigbee
Voice Recognition Wireless Home Automation System Based On ZigbeeIOSR Journals
Ìý
This document describes a voice recognition wireless home automation system based on Zigbee. The system uses a microcontroller connected to a HM2007 speech recognition chip and Zigbee modules to allow voice control of home appliances from a base station. The base station takes voice commands from a microphone, which are processed by the HM2007 chip and sent via Zigbee to a remote station. The remote station then controls electrical devices and sensors and sends status information back to the base station display. The system is designed for elderly and disabled users to easily operate home automation with voice commands for security and convenience.Similar to Intrond (20)
Olo Cust Prez
Olo Cust Prez guestd9a90f
Ìý
The document provides a high-level overview of the Olo River digital home platform:
1. The Olo River SoC includes an Intel XScale CPU, video and audio decoding/encoding capabilities, security features, graphics acceleration, memory interfaces, and peripheral interfaces.
2. The Olo Creek development board is a reference design for the Olo River SoC and includes features like memory, PCI/miniPCI slots, smart card interfaces, audio/video I/O, USB, Ethernet, and SATA.
3. The Olo River software architecture includes drivers, libraries and middleware to support features like graphics, audio, streaming media, and interfaces to external devices. Applications can use graphics APIs andFireFlyâ„¢: Evolving Mobile Device Platforms
FireFlyâ„¢: Evolving Mobile Device PlatformsInhand Electronics Incorporated
Ìý
InHand Electronics, Inc. is a leading provider of low-power embedded systems to Original Equipment Manufacturers of battery-operated handheld and wireless devices, such as UMPCs, PDAs, wearable computers, industrial computers, and smart sensors.wiretap brochure7
wiretap brochure7CaudalFin Technologies
Ìý
CaudalFin Technologies produces the WireTap voice logger product line. The WireTap boards can turn an ordinary computer into a digital voice logger for E1/T1/J1 trunks using Asterisk open source software. Key features include on-board DMA, support for multiple audio formats, high impedance recording, gain control, automatic cable detection, and an AMI interface. The WireTap provides lawful intercept and call monitoring capabilities at low cost using open source software and commodity hardware.Catálogo DDC con bus de datos y software para aeronáutica
Catálogo DDC con bus de datos y software para aeronáuticaMarketing Donalba
Ìý
This document provides an overview of Data Device Corporation (DDC), including its product areas, boards, and software. DDC was established in 1964 and specializes in data networking technologies like MIL-STD-1553, ARINC, Ethernet, and more for applications in military, aerospace, vehicles, and industrial markets. The document describes DDC's various boards and products that support these standards in form factors including PCI, PMC, USB, and more. It also outlines DDC's software which can operate devices in standalone, remote access, or protocol conversion modes.Bus de datos y Software de DDC
Bus de datos y Software de DDCMarketing Donalba
Ìý
This document provides an overview of Data Device Corporation's databus boards and software products. It describes DDC's history and facilities, their product areas including MIL-STD-1553, ARINC, and Ethernet devices. It also summarizes their various board form factors for applications including test/simulation, embedded, and portable, with options for 1553, ARINC, or multi-I/O interfaces. Floor plans and specifications are given for several of their computer platforms that support I/O expansion with DDC interface cards.INTELLIGENT ACCESS CONTROL. TIME & ATTENDANCE SYSTEM
INTELLIGENT ACCESS CONTROL. TIME & ATTENDANCE SYSTEMwisdom0313
Ìý
The document describes an intelligent access control and time attendance system from Bioinsec Co., Ltd. It includes details about various components of the system such as fingerprint and RF card readers, a color LCD display, touchpad, waterproofing, connectivity options, and remote management features. The system provides user authentication, visitor verification, and stores log data. It can be customized with different reader options and has expansion capabilities.Matrix dgs&d presentation
Matrix dgs&d presentationmatrixtelesol
Ìý
The document provides information about DGS&D business and how Matrix products like the ETERNITY PBX platform can benefit organizations working with DGS&D. It discusses:
1) DGS&D is the central purchase and quality assurance organization of the Government of India that handles registration and rate contracts for products. Registering with DGS&D provides a ready platform for sales.
2) Partnering with Matrix for DGS&D business provides benefits like special pricing, marketing support, and opportunities to supply additional products and services beyond just PBXs.
3) The ETERNITY PBX platform from Matrix is well-suited for DGS&D requirements as it offers reliable technology, easy management,Dana Server Datasheet
Dana Server DatasheetAntoine Rouget
Ìý
The document describes the Dana Server, a digital audio network appliance with a flexible I/O configuration. It has a 32-bit floating point DSP, analog and digital I/O cards, audio processing plugins, and network control capabilities. The Dana Server is designed to leverage existing IT infrastructure by using Ethernet for both audio and control data transport, providing greater scalability and simplicity for audio distribution applications.Network Allies 1553/Arinc PC Tablet
Network Allies 1553/Arinc PC Tabletpaulh54
Ìý
The Avionics 1553/ARINC Tablet is designed for aviation and aeronautics, meeting standards for hazards. It has an Intel Atom processor, 10.4" touchscreen display, 2GB RAM, 80GB SSD, and multiple I/O ports. It interfaces with MIL-STD-1553 and ARINC protocols using an FPGA engine and API. It is ruggedized against environmental factors with a 6-pound weight and operating temperature of 0-50°C. Various models offer different channel configurations for 1553 and ARINC.Digital pa audio systems
Digital pa audio systemstm stagetec systems
Ìý
digital PA provides an easy to use audio system with leading edge technology that is effortlessly customised and completely networkable.
Pds m series-traditional_io[1]![Pds m series-traditional_io[1]](https://cdn.slidesharecdn.com/ss_thumbnails/pdsm-seriestraditionalio1-130115100809-phpapp02-thumbnail.jpg?width=560&fit=bounds)
Pds m series-traditional_io[1]Heirarch Meissner
Ìý
This document provides information on DeltaV Traditional I/O, including:
- Traditional I/O offers modular components that decrease costs and installation time/expense while increasing productivity and availability.
- The I/O subsystem includes carriers, power supplies, I/O interface cards and terminal blocks that plug together easily.
- A variety of analog and discrete I/O cards are available, including HART-enabled cards, and some support redundancy.
- Specifications are provided for the analog input, RTD input, and thermocouple/mV input cards.Offline Voice Control
Offline Voice ControlJishnu Rajeev
Ìý
The document describes the development of an offline voice and gesture controlled device called Intelli-Hub. It discusses developing the device using a SoC solution with an integrated audio front-end and voice recognition capabilities. Circuit designs and firmware were developed to enable voice commands to control loads like fans and lights. Gesture sensing was also integrated using an APDS-9960 sensor to allow control through hand gestures. The solution aims to provide privacy-focused voice control at a lower cost than online assistants, making it suitable for both consumer and industrial applications.Edgepluse400 ds en
Edgepluse400 ds ensanzen enterprises
Ìý
The document describes the EdgePlus E400 networked access control solution. It has the following key features:
- Manages up to 44,000 cardholders from a host system and stores the access control database at the door.
- Provides network connectivity for existing or new Wiegand or HID readers using standard CAT5 cabling for both data and power.
- Puts the access control processor and host interface directly at the door for retrofits or new installations with less wiring.Edgepluse400 ds en
Edgepluse400 ds ensanzen enterprises
Ìý
The document describes the EdgePlus E400 networked access control solution. It has the following key features:
- Manages up to 44,000 cardholders from a host system and stores the access control database at the door.
- Provides network connectivity for existing or new Wiegand or HID readers using standard CAT5 cabling for both data and power over Ethernet.
- Puts access control and interface capabilities directly at the door for retrofits or new installations with less wiring.
- Interfaces with various card technologies and controls access devices and doors at the edge of the network.Máy tÃnh công nghiệp Quanmax Ubiq-100
Máy tÃnh công nghiệp Quanmax Ubiq-100Long Trump
Ìý
Máy tÃnh công nghiệp Quanmax Ubiq-100
Ứng dụng IoT cho Smart Home, Tự động hóa, Smart Grid, Nông nghiệp...
Máy tÃnh công nghiệp Quanmax được phân phối bởi:
Công ty TNHH Công Nghệ Milo
http://www.milotech.vn - sales.milotech@gmail.com
Formosa_Mita2000E_FINAL
Formosa_Mita2000E_FINALRon Stimpson
Ìý
The MITA-2000E is a 1800W per channel stereo amplifier with built-in 32-bit DSP and extensive digital network control. It uses Class-D design for high efficiency and includes cooling features for reliability. Its customizable DSP and network control allow easy setup and monitoring of complex sound systems from a single or multiple devices.Ih55 e mht-100101
Ih55 e mht-100101nswsolucoes
Ìý
This document provides a setup manual for the TH55B HD motherboard. It includes the following key points:
1. An introduction section describing the package contents, motherboard features such as CPU and memory support, and rear panel connectors.
2. A hardware installation section covering how to install the CPU, connect fans, and install system memory.
3. A headers and jumpers setup section explaining how to configure headers and jumpers on the motherboard.
4. A BIOS and software section detailing the BIOS features and included software utilities.
5. Additional troubleshooting and support information for driver installation, BIOS beep codes, and common issues.
6. AppendicesDatavideo MS-800
Datavideo MS-800AV ProfShop
Ìý
The MS-800 is an integrated live production system centered around the SE-800 4-channel DV/analog video switcher. It allows switching of up to 4 video and 6 audio channels. Additional integrated components include a hard drive recorder, monitoring, intercom, and titling systems. The MS-800 provides various video and audio connections and outputs composite, S-video, component, SDI, and DV signals for live broadcasting or recording in both analog and digital formats. It is designed for quick setup and portable use at live events.Taurus Series Multimedia Player TB40 Specifications-V1.0.2.pdf
Taurus Series Multimedia Player TB40 Specifications-V1.0.2.pdfHostech LED
Ìý
The document provides specifications for the NovaStar TB40 multimedia player, including its output and input capabilities, control features, performance, functions, appearance, indicators, and media decoder support. Key details include support for up to 1.3 million pixels of LED display output, HDMI and Gigabit Ethernet ports, 4K video playback, synchronous multi-screen playback, and Android operating system with content publishing and monitoring software.Total Recall VR Overview Presentation
Total Recall VR Overview Presentationnickmcl
Ìý
This document describes the Total Recall VR professional audio logging and call recording system. It provides an overview of the system's features, including its ability to capture audio from various communication protocols. It also discusses the system's benefits such as affordability, reliability, security, and flexibility. Various appliance options are presented, including rack-mount and desktop models, with details about their recording channel capacities and components.Intrond
- 1. INTRON-D: One System - Multiple Personalities
- 2. INTRON-D: One System - Multiple Personalities Talk-Back System PAGA Emergency Annunciation (ESD, F&G) Security (Audio, Visual and Access) Entertainment
- 3. INTRON-D – System Redundancy Options 100 % 50 %
- 4. INTRON-D – Component Redundancy Options Each Central Exchange Unit can manage multiple components in a redundant configuration Central Processor Power Source Line Cards Loop Monitors Digital Voice Processor Digital I/O Cards Amplifiers
- 5. INTRON-D Interface Capabilities Fire and Gas Detection 8 DIO Interface Card Allows for 8 digital input/outputs to connect to Legacy Paging external amplification units and address existing speaker loops via talkback call stations. Evacuation Sirens Cellular Mass Notification Security ------------------------------------------------------------------------ 4 DBR / 6 ATI Interface Card Allows for interface to telephony system
- 6. INTRON-D - Installation The INTRON-D does not require any proprietary cable. Digital Components require twisted pair such as CAT-5 or telephony cable and Analog Components such as speakers require basic speaker wire. Unlike other talkback systems, the INTRON-D is a self powered system requiring no additional power at any local devices.