Details qingan
Download as DOCX, PDF
0 likes176 views
This document provides specifications for an air conditioner compressor, including: 1. It is designed for room air conditioners running on 220-240V/50Hz power with R22 refrigerant. 2. The compressor has a working capacity of 22.6CM3/rev and rated capacity of 3850W at 220V with a motor input power of 1280W and running current of 5.5A. 3. Additional details provided include refrigerant oil type, weight, motor specifications, insulation class, winding resistance, overload conditions, performance standards, and operating requirements.
Details qingan
- 1. Details A/C Compressor Specification of compressors; 1. Application scope: Room air conditioners 2. Rated voltage/frequency/phase: 220-240V/50Hz/1 3. Refrigerant: R22 4. Rage of ambient temperature: -5~43尊C 5. Range of evaporating temperature: 45~65尊C6. working capacity: 22.6CM3/rev 7. Rated capacity "3850W(220V) 8. Motor input power: 1280W(220V) 9. Running current: 5.5A (220V) 10. EER: 3.3 W/W 11. Refrigeration oil: 4GSDI 12. Amount of oil charge: 410ml 13. Net weight: 15.6kg 14. Motor: Motor type, permanent split capacitorted 15. Locked rotor AMPS: 38A( 220V), 16. Running capacitor: 30Mf/450V/AC 17. Insulation class: Class B 18. Winding resistance(M/S): 2.07/4.34OM(@20尊C) 19. Outer compound protector: V260-150-141E OR: MRA13401-9201
- 2. 20. Working conditions: NOMINAL OVERLOAD Evaporating temperature 7.2尊C 10.0 Condensing temperature 54.4尊C 65.8尊C Super-coding temperature 8.3尊C 5尊C Suction gas temperature 35.0尊C 18.0尊C Ambient temperature 35.0尊C 25.0尊C 21. Specific performance A. Temperature of motor winding: 130尊C max B. Vibration: 40M/S2 max C. Noise: 55dB(A) max D. LEAKAGE TESTING PRESSURE: 2.95mpa E. Mechanical strength pressure: 10.5mpa F. Insulation resistance: 30MOM G. Electric strength: 1500V H. Residul moisture: 200mg max I. Residual impurity: 40mg max 22. Operating conditions A. Start-up voltage( min): 58% of rated voltage B. Running voltage range: +/-10% of rated voltage C. When the compressor has been installed into the refrigerating system, it should remain perpendicular to the leveling floor with max inclination no more than 5属 D. The period of turning down and restarting the compressor should be more than 3 minutes E. The residual moisture in the refrigerating system(not include the compressor ) should not exceed 60ppm, the residual impurity in the refrigerating system( not include the compressor) should not exceed 20mg F. The filling amount of refrigerant should not 1250g G. When the electric container cap is installed, the nut screw moment is 1.8N. M