Tanveer

Nov 5, 2017Download as pptx, pdf1 like135 views

This document discusses personal protective equipment (PPE) used in general industry. It covers the importance of head, eye, face, hearing, hand, foot, and leg protection. Common hazards are identified for each body area, such as falling objects hitting the head or chemical splashes to the eyes. Examples of PPE are provided, including hard hats, safety glasses, gloves, steel-toe boots, and ear plugs. Selection criteria are outlined for eye and face protection. The goal of PPE is to shield the body from workplace dangers.

PPT 10-hr. General Industry – PPE v.03.01.17
1
Created by OTIEC Outreach Resources Workgroup
Personal Protective
Equipment

PPT 10-hr. General Industry – PPE v.03.01.17
2
Created by OTIEC Outreach Resources Workgroup
Head protection:
• Frequent causes of head injuries
– Falling objects from above striking on the head;
– Bump head against fixed objects, such as
exposed pipes or beams; or
– Accidental head contact with electrical hazards.
Source: OSHA
Types of PPE

PPT 10-hr. General Industry – PPE v.03.01.17
3
Created by OTIEC Outreach Resources Workgroup
Types of PPE
Why head protection is important…
Source: OSHA

PPT 10-hr. General Industry – PPE v.03.01.17
4
Created by OTIEC Outreach Resources Workgroup
Types of PPE
Eye and face protection:
Source of images: OSHA

PPT 10-hr. General Industry – PPE v.03.01.17
5
Created by OTIEC Outreach Resources Workgroup
Source: OSHA
• Common causes of eye injuries
– Chemical splashes
– Blood or OPIM splashes or sprays
– Intense light
– Dust and other flying particles
– Molten metal splashes
Types of PPE

PPT 10-hr. General Industry – PPE v.03.01.17
6
Created by OTIEC Outreach Resources Workgroup
• Selecting eye and face protection –
elements to consider:
– Ability to protect against workplace hazards
– Should fit properly
– Should provide unrestricted vision and
movement
– Durable and cleanable
– Allow unrestricted functioning of other PPE
Types of PPE

PPT 10-hr. General Industry – PPE v.03.01.17
7
Created by OTIEC Outreach Resources Workgroup
• Safety glasses
– Used to protect against moderate impacts
from particles
Source of graphics: OSHA
Types of PPE

PPT 10-hr. General Industry – PPE v.03.01.17
8
Created by OTIEC Outreach Resources Workgroup
• Face shields
– Protect face from nuisance
dusts and potential splashes
or sprays of hazardous liquids
– Shields do not protect from
impact hazards unless so rated
– Shields are for face protection, not eye
protection. To protect the eyes, wear safety
glasses with side shields, or goggles under
the face shield.
Source: OSHA
Types of PPE

PPT 10-hr. General Industry – PPE v.03.01.17
9
Created by OTIEC Outreach Resources Workgroup
Source of photos: OSHA
• Welding shields
– Protect eyes from burns
caused by:
• Infared light
• Intense radiant light
– Protect eyes and face from
flying sparks, metal spatter,
and slag chips
Types of PPE

PPT 10-hr. General Industry – PPE v.03.01.17
10
Created by OTIEC Outreach Resources Workgroup
• Laser safety goggles
– Provide protection from hazards:
• physical contact such as flying particles
• ultraviolet light, laser, and welding
Source: OSHA
Types of PPE

PPT 10-hr. General Industry – PPE v.03.01.17
11
Created by OTIEC Outreach Resources Workgroup
Source of photos: OSHA
Hearing protection:
Types of PPE

PPT 10-hr. General Industry – PPE v.03.01.17
12
Created by OTIEC Outreach Resources Workgroup
• Examples of hearing protection:
– Disposable foam plugs
– Molded ear plugs
– Noise-cancelling ear plugs
– Ear muffs
• Consider Noise Reduction
Rating (NRR) of devices
NIOSH/John Rekus/elcosh.org
Source of photos: OSHA
Types of PPE

PPT 10-hr. General Industry – PPE v.03.01.17
13
Created by OTIEC Outreach Resources Workgroup
Hand protection:
Types of PPE
• Potential hazards for hands
– Skin absorption of hazardous
substances
– Lacerations or severe cuts
– Punctures
– Chemical burns
– Thermal burns
– Extreme temperatures
Source of photos: OSHA

PPT 10-hr. General Industry – PPE v.03.01.17
14
Created by OTIEC Outreach Resources Workgroup
Source of photos: OSHA
Anti-vibration
Heat-resistant
Leather Palm
Cut-resistant
Permeation-resistant
Chemical-resistant
• Types of gloves
Types of PPE

PPT 10-hr. General Industry – PPE v.03.01.17
15
Created by OTIEC Outreach Resources Workgroup
Foot and leg protection:
• Causes of foot injuries:
– Falling or rolling of heavy objects
– Crushing or penetrating materials
– Sharp objects that can penetrate
the sole
– Exposure to molten metal
– Working on, or around, hot, wet, or
slippery surfaces
– Working when electrical
hazards are present.
Source: OSHA
Types of PPE

PPT 10-hr. General Industry – PPE v.03.01.17
16
Created by OTIEC Outreach Resources Workgroup
• Examples of foot and leg protection
– Impact-resistant toe and/or instep
• Steel
• Composite
– Heat-resistant soles
– Metal shanks
– Specialty footwear may be needed
• Metatarsal guards
• Liquid- or chemical-resistant
• Conductive or nonconductive
Source of photos: OSHA
Types of PPE

PPT 10-hr. General Industry – PPE v.03.01.17
17
Created by OTIEC Outreach Resources Workgroup

This document discusses personal protective equipment (PPE) requirements for concrete workers. It identifies common hazards like silica dust, chemical burns, falling objects, and rebar/nails. Regulations require head, eye, respiratory, hand, and foot protection. Hard hats must be worn for overhead hazards. Safety glasses with side shields or face shields protect from flying debris. Respirators approved for silica are required. Gloves suitable for the task and steel-toed boots offer hand and foot protection. Hearing protection is needed with loud equipment. PPE must be properly worn, maintained, and disposed of to be effective.

Eye protection by GCKATSMikaela Delia

��

Personal protective equipment.........aryaarya das

��

This document discusses personal protective equipment (PPE) and focuses on eye and face protection. It notes that nearly 2 million people receive disabling work injuries each year, with over a quarter involving the head, eyes, hands or feet. PPE is designed to protect workers from hazards like chemicals, radiation, impacts and more. The document outlines OSHA standards for employers to assess hazards, provide necessary PPE and training. It details types of eye and face protection like safety glasses, goggles, face shields and welding helmets and notes criteria for selecting the right protection for specific hazards.

OSHA Eye and Face ProtectionJo Woolery

��

The document discusses eye and face protection in occupational settings. It notes that eye injuries are common in the workplace, with flying objects, dust, and liquid splashes posing top hazards. The document outlines how to identify potential hazards and recommends always assuming hazards are present and wearing appropriate protective equipment. It describes different types of eye and face protection including safety glasses, goggles, and face shields, and how the proper protection depends on the job task and hazard level. Employers are required to assess hazards and provide necessary protective equipment.

Personal protective equipmentstudent

��

Personal protective equipment (PPE) is designed to protect workers from injuries caused by hazards in the workplace. PPE includes items that protect the head, eyes, face, hearing, respiratory system, hands, and feet. Employers are required to provide appropriate PPE to workers when hazards are present and to train workers on the proper use of PPE. Common types of PPE include safety glasses, goggles, face shields, ear plugs or muffs, respirators, gloves, safety shoes, and protective clothing.

Managing health and safetyدكتور تامر عبدالله شراكى

��

This document provides an introduction to managing health and safety. It discusses how people perceive risk differently based on their experiences and expertise. It outlines a case study where a worker fell to his death due to a lack of training and protection on an unsafe worksite. The document states that those responsible for health and safety cannot rely solely on common sense and must implement proper health and safety management practices. It indicates this guide will cover the main principles of occupational health and safety management, including risk assessment, responsibilities, and typical documentation methods. Specialist assessments may still be required for certain hazards.

Eye & face protectionRakesh Kumar

��

This document discusses the importance of eye and face protection in the workplace. It notes that thousands of people are blinded each year from preventable work-related eye injuries. It then describes the delicate structure of the eye and various types of accidents that can cause eye injuries, such as objects striking the eye, hazardous chemicals, swinging objects, and radiant energy sources like welding. The document outlines potential hazards like dusts, powders, fumes, mists, toxic gases and liquids, flying objects or particles, large objects, and electrical hazards. It recommends following safe work practices and using personal protective equipment like safety glasses, face shields, and welding helmets to protect the eyes and face from these workplace dangers.

Personal protective equipmentsGehan R Zaki

��

Personal protective equipment (PPE) is designed to protect workers from workplace hazards and injuries. PPE should be compatible with international standards, fit the body properly, and be effective, comfortable and easy to use. Employers are responsible for providing appropriate PPE to workers and ensuring they receive training on proper use. Common types of PPE include protective clothing, helmets, ear protection, respirators, gloves, footwear, eye and face protection, and safety harnesses. The type of PPE used depends on the specific hazards present. PPE should always be considered a last resort after implementing methods to control hazards at their source or along exposure pathways.

personal protective equipmentRodrigo Moraes

��

Eye protection in workplace Shadi AL Ashwal

��

Eye ProtectionRabia Ammer

��

This document discusses the importance of eye protection and preventing eye injuries. It notes that eye injuries occur at a rate of about 2000 per day, with 10-20% resulting in vision loss. Proper eye protection, such as safety glasses or goggles, can prevent around 90% of eye injuries. The document outlines various types of eye protection equipment and how to select the appropriate equipment based on the job hazards. It emphasizes that eye protection is important both on and off the job, such as during household activities or sports. Education, hazard identification and removal, engineering controls, administrative controls, and personal protective equipment are all discussed as ways to prevent eye injuries.

Know how to use personal protective equipment 5michael mcewan

��

The document discusses personal protective equipment (PPE) and its importance in construction. It states that PPE should be used as a last resort to protect against health and safety risks that cannot otherwise be controlled. The Personal Protective Equipment at Work Regulations require that employers provide PPE free of charge and ensure it is properly assessed, maintained, stored, used correctly and fitted for its intended purpose. The document provides examples of common PPE for different parts of the body and types of hazards, as well as respiratory protective equipment. It emphasizes that the right PPE must be chosen based on the hazards present and be adequate and suitable for the task.

Construction safety equipmentPiash Saha

��

Safety equipment is important for protecting workers and maintaining comfort in the work environment. Safety gear is designed according to the specific work environment and may include protective clothing that is insulated, cooling, high visibility, flame retardant, or chemical resistant. Common safety equipment used in construction includes helmets, gloves, glasses and goggles, ladder stability anchors, gas masks, safety boots and shoes, ear plugs and muffs, harnesses, and flashlights. Proper selection and use of safety equipment can help prevent injuries from hazards like falling, flying debris, extreme temperatures, chemicals, and loud noises.

2.1 personal protective equipments (ppe) convertedMudit M. Saxena

��

Personal protective equipment (PPE) is any safety equipment worn to prevent workplace injuries. Training is required to understand when and how to use different types of PPE. A hazard assessment determines jobs requiring PPE use. Common PPE includes equipment for the head, eyes, face, hands, feet, body, hearing, and respiratory protection. Examples of PPE discussed in the document are safety glasses, goggles, face shields, gloves, steel-toed boots, ear plugs, dust masks, and respirators. Proper use, care, maintenance, and cleaning of PPE is important for effective protection.

Hazards in the WorkplaceKevin Harvey

��

The document discusses various workplace hazards including safety hazards, biological hazards, physical hazards, ergonomic hazards, and chemical hazards. It provides examples of each type of hazard and notes that eliminating hazards can help create a safer and more productive workplace by reducing injuries and time off. The document also provides definitions of a hazard and risk and includes links to additional resources on personal protective equipment and the difference between hazards and risks.

Hazards in The WorkplaceJohn Tucker

��

Personal Protective EquipmentReliance

��

Personal Protective Equipment (P.P.E.)chazzportal8

��

This document defines and describes various types of personal protective equipment (PPE) including: Non-specialty safety-toe protective footwear such as steel-toe boots that protect the feet from falling objects. Non-specialty prescription safety eyewear such as glasses or eyeglasses worn for eye protection or vision correction. Additional PPE described include sturdy work shoes, lineman's boots, ordinary cold weather gear such as jackets, logging boots, ordinary rain gear such as raincoats or rain suits, back belts, long sleeve shirts, long pants, and dusk masks worn over the nose and mouth to protect from dusts.

Use of PPES training meil at solar site rwss-3184Aswini Acharya

��

Personal protective equipment (PPE) is equipment worn to minimize exposure to hazards that cause serious workplace injuries and illnesses. PPE includes items worn on the head (hard hats), eyes (safety glasses), ears (ear plugs), breathing apparatus, hands, body, and feet. The document outlines common types of PPE and their purposes, such as using gloves to protect against cuts, chemicals, and electric shock. It emphasizes that employers must provide appropriate PPE, ensure it is properly maintained and stored, and that workers are trained in its safe use. Assessing workplace hazards is critical for selecting PPE that effectively addresses the risks involved.

Identifying Hazards in the Workplace (and how to reduce their risks)Jonathan James

��

This document discusses identifying and reducing risks from hazards in the workplace. It outlines seven major types of workplace hazards: physical hazards, safety hazards, ergonomic hazards, biological hazards, chemical hazards, and stress-related hazards. Examples of each type of hazard are provided. The document stresses that both employers and employees should be aware of workplace hazards in order to improve safety and ensure proper working conditions.

2- PPE.pptxRudiFajardo1

��

This document discusses personal protective equipment (PPE) and includes the following key points: - It describes different types of PPE including head, eye, face, respiratory, hearing, hand, foot, and body protection. - For each type of PPE, it provides examples and discusses selecting the appropriate equipment to address specific workplace hazards. - It outlines the responsibilities of both employers and employees regarding PPE training, use, maintenance, and replacement.

1-PPE0000000000000000000000000000000000000000000.pptxredamesbah1

��

PPE OMP III.pptxmaritzaDazOrtz

��

This document discusses personal protective equipment (PPE) requirements in general industry workplaces. It outlines the hierarchy of controls employers must follow to protect workers, with PPE as a last resort. The document describes different types of PPE including head, eye, face, respiratory, hearing, hand, foot, and body protection. It notes employer responsibilities to provide appropriate PPE to comply with OSHA standards.

ppe.pptxssuser0ebdc3

��

This document discusses personal protective equipment (PPE) used in general industry workplaces. It covers the employer and employee responsibilities regarding PPE and describes the types of PPE, including head, eye, face, respiratory, hand, foot, and body protection. The presentation emphasizes that PPE should be the last resort after engineering and administrative controls, and that employers must provide appropriate PPE and training, while employees must properly use and maintain assigned PPE.

POWERPOINT PRESENTATION PPE GROUP THREEEChadCalumpang1

��

Personal Protective Equipment(PPE)AsmaraAslam1

��

Gohil & Iligan reporting in OSH.pptxJuvil2

��

This document outlines a presentation on personal protective equipment (PPE) in general industry. It discusses the hierarchy of controls as they relate to PPE, identifies common types of PPE like head, eye, face, respiratory, hand, foot, and hearing protection. It also explains employer and employee responsibilities regarding PPE use, selection, and training. The objectives are to describe PPE controls within the hazard control hierarchy, identify PPE types, and explain PPE requirements.

introduction to ppe in industry.pptxRupeshJadhav50

��

This document provides an overview of personal protective equipment (PPE) used in general industry workplaces. It discusses the hierarchy of controls and explains that PPE should be used as a last resort after engineering and administrative controls are implemented. The document then describes various types of PPE including head, eye, face, respiratory, hearing, hand, foot, and leg protection. For each type of PPE, it provides examples and explains selection criteria to ensure the equipment adequately protects workers from workplace hazards. The intended audience is workers completing a 10-hour general industry outreach training on PPE.

introduction to ppe in industry.pptxRupeshJadhav50

��

PPE (Personal Protective Equipment) kit is a collection of items designed to protect an individual from various hazards and risks in specific environments. The contents of a PPE kit can vary depending on the intended use and the potential dangers involved. PPE kits are commonly used in healthcare settings, industrial workplaces, and in response to emergencies. Here are some common items that might be included in a PPE kit:

Entry-Personnel Protective Equipment- Health and Safety Policy-Material Safet...sankarn34

��

More Related Content

What's hot (12)

personal protective equipmentRodrigo Moraes

��

Eye protection in workplace Shadi AL Ashwal

��

Eye ProtectionRabia Ammer

��

Know how to use personal protective equipment 5michael mcewan

��

Construction safety equipmentPiash Saha

��

2.1 personal protective equipments (ppe) convertedMudit M. Saxena

��

Hazards in the WorkplaceKevin Harvey

��

Hazards in The WorkplaceJohn Tucker

��

Personal Protective EquipmentReliance

��

Personal Protective Equipment (P.P.E.)chazzportal8

��

Use of PPES training meil at solar site rwss-3184Aswini Acharya

��

Identifying Hazards in the Workplace (and how to reduce their risks)Jonathan James

��

personal protective equipmentRodrigo Moraes

��

Eye protection in workplace Shadi AL Ashwal

��

Eye ProtectionRabia Ammer

��

Know how to use personal protective equipment 5michael mcewan

��

Construction safety equipmentPiash Saha

��

2.1 personal protective equipments (ppe) convertedMudit M. Saxena

��

Hazards in the WorkplaceKevin Harvey

��

Hazards in The WorkplaceJohn Tucker

��

Personal Protective EquipmentReliance

��

Personal Protective Equipment (P.P.E.)chazzportal8

��

Use of PPES training meil at solar site rwss-3184Aswini Acharya

��

Identifying Hazards in the Workplace (and how to reduce their risks)Jonathan James

��

Similar to Tanveer (20)

2- PPE.pptxRudiFajardo1

��

1-PPE0000000000000000000000000000000000000000000.pptxredamesbah1

��

PPE OMP III.pptxmaritzaDazOrtz

��

ppe.pptxssuser0ebdc3

��

POWERPOINT PRESENTATION PPE GROUP THREEEChadCalumpang1

��

Personal Protective Equipment(PPE)AsmaraAslam1

��

Gohil & Iligan reporting in OSH.pptxJuvil2

��

introduction to ppe in industry.pptxRupeshJadhav50

��

introduction to ppe in industry.pptxRupeshJadhav50

��

Entry-Personnel Protective Equipment- Health and Safety Policy-Material Safet...sankarn34

��

Routes of Chemical Entry-Personnel Protective Equipment- Health and Safety Po...sankarn34

��

Personal Protective Equipment (PPE) Training - PREPARED BY JAY.pptxarnoldarayata1

��

Personal Protective Equipment TOM.pptxTomGoDawgs

��

This document discusses personal protective equipment (PPE). It begins by explaining the hierarchy of controls for protecting employees, with engineering and administrative controls being more effective than PPE. It then covers the types of PPE including head, eye, face, respiratory, hearing, hand, foot, and body protection. The document emphasizes that PPE is the last line of defense and discusses employer and employee responsibilities for PPE training, use, and maintenance. It concludes with a hazard recognition activity to identify workplace hazards and appropriate PPE.

Module 2.pptxraaachelgreen

��

basics_of_ppe_training.ppt......................................RAPID187OXAGON

��

basics_of_ppe_training.ppt ppe componentsNitika588942

��

specialized clothing or equipment worn by an employee for protection against infectious materials” Types of PPE Used in Healthcare Settings Gloves – protect hands Gowns/aprons – protect skin and/or clothing Masks and respirators– protect mouth/nose Respirators – protect respiratory tract from airborne infectious agents. Types of PPE Used in Healthcare Settings-Goggles – protect eyes Face shields – protect face, mouth, nose, and eyes Key Points About PPE-Don before contact with the patient, generally before entering the room Use carefully – don’t spread contamination Remove and discard carefully, either at the doorway or immediately outside patient room; remove respirator outside room Immediately perform hand hygiene How to Safely Use PPE-Keep gloved hands away from face Avoid touching or adjusting other PPE Remove gloves if they become torn; perform hand hygiene before donning new gloves Limit surfaces and items touched. Contaminated” and “Clean” Areas of PPE-Contaminated – outside front Areas of PPE that have or are likely to have been in contact with body sites, materials, or environmental surfaces where the infectious organism may reside Clean – inside, outside back, ties on head and back Areas of PPE that are not likely to have been in contact with the infectious organism Sequence for Removing PPE-Gloves Face shield or goggles Gown Mask or respirator Where to Remove PPE-At doorway, before leaving patient room or in anteroom* Remove respirator outside room, after door has been closed* Standard Precautions-Previously called Universal Precautions Assumes blood and body fluid of ANY patient could be infectious Recommends PPE and other infection control practices to prevent transmission in any healthcare setting Decisions about PPE use determined by type of clinical interaction with patient Standard Precautions for PPE-Mask and goggles or a face shield – Use during patient care activities likely to generate splashes or sprays of blood, body fluids, secretions, or excretionsMask and goggles or a face shield – Use during patient care activities likely to generate splashes or sprays of blood, body fluids, secretions, or excretions Mask and goggles or a face shield – Use during patient care activities likely to generate splashes or sprays of blood, body fluids, secretions, or excretions Mask and goggles or a face shield – Use during patient care activities likely to generate splashes or sprays of blood, body fluids, secretions, or excretions Mask and goggles or a face shield – Use during patient care activities likely to generate splashes or sprays of blood, body fluids, secretions, or excretions Mask and goggles or a face shield – Use during patient care activities likely to generate splashes or sprays of blood, body fluids, secretions, or excretions Mask and goggles or a face shield – Use during patient care activities likely to generate splashes or sprays of blood, body fluids, secretions, or excretions Mask and goggles or a face shield – Use

basics of ppe training ppt in industry sdtMalekMarryAnne

��

basics_of_ppe_training.pptaqmaraqeem1

��

This document provides instructions for training employees on proper personal protective equipment (PPE) use. It states that the trainer must fill in slides with job-specific PPE information from completed hazard assessments. It can delete non-applicable sections but must keep certain introductory and concluding slides. The document then covers various types of PPE like head, eye, hand and foot protection as well as when they are needed and proper use. It stresses the importance of using PPE correctly for the relevant hazards.

basics_of_ppe_training (1).pptNeha Kajulkar

��

basics_of_ppe_training (1).pptitsAhmad2

��

2- PPE.pptxRudiFajardo1

��

1-PPE0000000000000000000000000000000000000000000.pptxredamesbah1

��

PPE OMP III.pptxmaritzaDazOrtz

��

ppe.pptxssuser0ebdc3

��

POWERPOINT PRESENTATION PPE GROUP THREEEChadCalumpang1

��

Personal Protective Equipment(PPE)AsmaraAslam1

��

Gohil & Iligan reporting in OSH.pptxJuvil2

��

introduction to ppe in industry.pptxRupeshJadhav50

��

introduction to ppe in industry.pptxRupeshJadhav50

��

Entry-Personnel Protective Equipment- Health and Safety Policy-Material Safet...sankarn34

��

Routes of Chemical Entry-Personnel Protective Equipment- Health and Safety Po...sankarn34

��

Personal Protective Equipment (PPE) Training - PREPARED BY JAY.pptxarnoldarayata1

��

Personal Protective Equipment TOM.pptxTomGoDawgs

��

Module 2.pptxraaachelgreen

��

basics_of_ppe_training.ppt......................................RAPID187OXAGON

��

basics_of_ppe_training.ppt ppe componentsNitika588942

��

basics of ppe training ppt in industry sdtMalekMarryAnne

��

basics_of_ppe_training.pptaqmaraqeem1

��

basics_of_ppe_training (1).pptNeha Kajulkar

��

basics_of_ppe_training (1).pptitsAhmad2

��

Recently uploaded (20)

Iobit Driver Booster Pro Crack Free Download [Latest] 2025Mudasir

��

AI against disinformation and why it is not enoughYiannis Kompatsiaris

��

In recent years, the proliferation of generative AI technology has revolutionized the landscape of media content creation, enabling even the average user to fabricate convincing videos, images, text, and audio. However, this advancement has also exacerbated the issue of online disinformation, which is spiraling out of control due to the vast reach of social media platforms, sophisticated campaigns, and the proliferation of deepfakes. After an introduction including the significant impact on key societal values such as Democracy, Public Health and Peace, the talk focuses on techniques to detect visual disinformation, manipulated photos/video, deepfakes and visuals out of context. While AI technologies offer promising avenues for addressing disinformation, it is clear that they alone are not sufficient to address this complex and multifaceted problem. Limitations of current AI approaches will be discussed, along with broader human behaviour, societal and financial challenges that must be addressed to effectively combat online disinformation. A holistic approach that encompasses technological, regulatory, and educational interventions, developing critical thought will be finally presented.

Agentic AI - The New Era of IntelligenceMuzammil Shah

��

This presentation is specifically designed to introduce final-year university students to the foundational principles of Agentic Artificial Intelligence (AI). It aims to provide a clear understanding of how Agentic AI systems function, their key components, and the underlying technologies that empower them. By exploring real-world applications and emerging trends, the session will equip students with essential knowledge to engage with this rapidly evolving area of AI, preparing them for further study or professional work in the field.

GDG Cloud Southlake #43: Tommy Todd: The Quantum Apocalypse: A Looming Threat...James Anderson

��

The Quantum Apocalypse: A Looming Threat & The Need for Post-Quantum Encryption We explore the imminent risks posed by quantum computing to modern encryption standards and the urgent need for post-quantum cryptography (PQC). Bio: With 30 years in cybersecurity, including as a CISO, Tommy is a strategic leader driving security transformation, risk management, and program maturity. He has led high-performing teams, shaped industry policies, and advised organizations on complex cyber, compliance, and data protection challenges.

The fundamental misunderstanding in Team TopologiesPatricia Aas

��

Multistream in SIP and NoSIP @ OpenSIPS Summit 2025Lorenzo Miniero

��

�ݺ�ߣs for my "Multistream support in the Janus SIP and NoSIP plugins" presentation at the OpenSIPS Summit 2025 event. They describe my efforts refactoring the Janus SIP and NoSIP plugins to allow for the gatewaying of an arbitrary number of audio/video streams per call (thus breaking the current 1-audio/1-video limitation), plus some additional considerations on what this could mean when dealing with application protocols negotiated via SIP as well.

UiPath Community Berlin: Studio Tips & Tricks and UiPath InsightsUiPathCommunity

��

Join the UiPath Community Berlin (Virtual) meetup on May 27 to discover handy Studio Tips & Tricks and get introduced to UiPath Insights. Learn how to boost your development workflow, improve efficiency, and gain visibility into your automation performance. 📕 Agenda: - Welcome & Introductions - UiPath Studio Tips & Tricks for Efficient Development - Best Practices for Workflow Design - Introduction to UiPath Insights - Creating Dashboards & Tracking KPIs (Demo) - Q&A and Open Discussion Perfect for developers, analysts, and automation enthusiasts! This session streamed live on May 27, 18:00 CET. Check out all our upcoming UiPath Community sessions at: 👉 https://community.uipath.com/events/ Join our UiPath Community Berlin chapter: 👉 https://community.uipath.com/berlin/

Droidal: AI Agents Revolutionizing HealthcareDroidal LLC

��

Droidal’s AI Agents are transforming healthcare by bringing intelligence, speed, and efficiency to key areas such as Revenue Cycle Management (RCM), clinical operations, and patient engagement. Built specifically for the needs of U.S. hospitals and clinics, Droidal's solutions are designed to improve outcomes and reduce administrative burden. Through simple visuals and clear examples, the presentation explains how AI Agents can support medical coding, streamline claims processing, manage denials, ensure compliance, and enhance communication between providers and patients. By integrating seamlessly with existing systems, these agents act as digital coworkers that deliver faster reimbursements, reduce errors, and enable teams to focus more on patient care. Droidal's AI technology is more than just automation — it's a shift toward intelligent healthcare operations that are scalable, secure, and cost-effective. The presentation also offers insights into future developments in AI-driven healthcare, including how continuous learning and agent autonomy will redefine daily workflows. Whether you're a healthcare administrator, a tech leader, or a provider looking for smarter solutions, this presentation offers a compelling overview of how Droidal’s AI Agents can help your organization achieve operational excellence and better patient outcomes. A free demo trial is available for those interested in experiencing Droidal’s AI Agents firsthand. Our team will walk you through a live demo tailored to your specific workflows, helping you understand the immediate value and long-term impact of adopting AI in your healthcare environment. To request a free trial or learn more: https://droidal.com/

Introducing FME Realize: A New Era of Spatial Computing and ARSafe Software

��

A new era for the FME Platform has arrived – and it’s taking data into the real world. Meet FME Realize: marking a new chapter in how organizations connect digital information with the physical environment around them. With the addition of FME Realize, FME has evolved into an All-data, Any-AI Spatial Computing Platform. FME Realize brings spatial computing, augmented reality (AR), and the full power of FME to mobile teams: making it easy to visualize, interact with, and update data right in the field. From infrastructure management to asset inspections, you can put any data into real-world context, instantly. Join us to discover how spatial computing, powered by FME, enables digital twins, AI-driven insights, and real-time field interactions: all through an intuitive no-code experience. In this one-hour webinar, you’ll: -Explore what FME Realize includes and how it fits into the FME Platform -Learn how to deliver real-time AR experiences, fast -See how FME enables live, contextual interactions with enterprise data across systems -See demos, including ones you can try yourself -Get tutorials and downloadable resources to help you start right away Whether you’re exploring spatial computing for the first time or looking to scale AR across your organization, this session will give you the tools and insights to get started with confidence.

John Carmack’s �ݺ�ߣs From His Upper Bound 2025 TalkRazin Mustafiz

��

Supercharge Your AI Development with Local LLMsFrancesco Corti

��

In today's AI development landscape, developers face significant challenges when building applications that leverage powerful large language models (LLMs) through SaaS platforms like ChatGPT, Gemini, and others. While these services offer impressive capabilities, they come with substantial costs that can quickly escalate especially during the development lifecycle. Additionally, the inherent latency of web-based APIs creates frustrating bottlenecks during the critical testing and iteration phases of development, slowing down innovation and frustrating developers. This talk will introduce the transformative approach of integrating local LLMs directly into their development environments. By bringing these models closer to where the code lives, developers can dramatically accelerate development lifecycles while maintaining complete control over model selection and configuration. This methodology effectively reduces costs to zero by eliminating dependency on pay-per-use SaaS services, while opening new possibilities for comprehensive integration testing, rapid prototyping, and specialized use cases.

System Card: Claude Opus 4 & Claude Sonnet 4Razin Mustafiz

��

With Claude 4, Anthropic redefines AI capabilities, effectively unleashing a ...SOFTTECHHUB

��

Content and eLearning Standards: Finding the Best Fit for Your-TrainingRustici Software

��

AI in Java - MCP in Action, Langchain4J-CDI, SmallRye-LLM, Spring AIBuhake Sindi

��

UiPath Community Zurich: Release Management and Build PipelinesUiPathCommunity

��

Ensuring robust, reliable, and repeatable delivery processes is more critical than ever - it's a success factor for your automations and for automation programmes as a whole. In this session, we’ll dive into modern best practices for release management and explore how tools like the UiPathCLI can streamline your CI/CD pipelines. Whether you’re just starting with automation or scaling enterprise-grade deployments, our event promises to deliver helpful insights to you. This topic is relevant for both on-premise and cloud users - as well as for automation developers and software testers alike. 📕 Agenda: - Best Practices for Release Management - What it is and why it matters - UiPath Build Pipelines Deep Dive - Exploring CI/CD workflows, the UiPathCLI and showcasing scenarios for both on-premise and cloud - Discussion, Q&A 👨‍🏫 Speakers Roman Tobler, CEO@ Routinuum Johans Brink, CTO@ MvR Digital Workforce We look forward to bringing best practices and showcasing build pipelines to you - and to having interesting discussions on this important topic! If you have any questions or inputs prior to the event, don't hesitate to reach out to us. This event streamed live on May 27, 16:00 pm CET. Check out all our upcoming UiPath Community sessions at: 👉 https://community.uipath.com/events/ Join UiPath Community Zurich chapter: 👉 https://community.uipath.com/zurich/

What is DePIN? The Hottest Trend in Web3 Right Now!cryptouniversityoffi

��

Splunk Leadership Forum Wien - 20.05.2025Splunk

��

Big Data Analytics Quick Research Guide by Arthur MorganArthur Morgan

��

This is a Quick Research Guide (QRG). QRGs include the following: - A brief, high-level overview of the QRG topic. - A milestone timeline for the QRG topic. - Links to various free online resource materials to provide a deeper dive into the QRG topic. - Conclusion and a recommendation for at least two books available in the SJPL system on the QRG topic. QRGs planned for the series: - Artificial Intelligence QRG - Quantum Computing QRG - Big Data Analytics QRG - Spacecraft Guidance, Navigation & Control QRG (coming 2026) - UK Home Computing & The Birth of ARM QRG (coming 2027) Any questions or comments? - Please contact Arthur Morgan at art_morgan@att.net. 100% human made.

cloudgenesis cloud workshop , gdg on campus mitasiyaldhande02

��

Step into the future of cloud computing with CloudGenesis, a power-packed workshop curated by GDG on Campus MITA, designed to equip students and aspiring cloud professionals with hands-on experience in Google Cloud Platform (GCP), Microsoft Azure, and Azure Al services. This workshop offers a rare opportunity to explore real-world multi-cloud strategies, dive deep into cloud deployment practices, and harness the potential of Al-powered cloud solutions. Through guided labs and live demonstrations, participants will gain valuable exposure to both platforms- enabling them to think beyond silos and embrace a cross-cloud approach to development and innovation.

Iobit Driver Booster Pro Crack Free Download [Latest] 2025Mudasir

��

AI against disinformation and why it is not enoughYiannis Kompatsiaris

��

Agentic AI - The New Era of IntelligenceMuzammil Shah

��

GDG Cloud Southlake #43: Tommy Todd: The Quantum Apocalypse: A Looming Threat...James Anderson

��

The fundamental misunderstanding in Team TopologiesPatricia Aas

��

Multistream in SIP and NoSIP @ OpenSIPS Summit 2025Lorenzo Miniero

��

UiPath Community Berlin: Studio Tips & Tricks and UiPath InsightsUiPathCommunity

��

Droidal: AI Agents Revolutionizing HealthcareDroidal LLC

��

Introducing FME Realize: A New Era of Spatial Computing and ARSafe Software

��

John Carmack’s �ݺ�ߣs From His Upper Bound 2025 TalkRazin Mustafiz

��

Supercharge Your AI Development with Local LLMsFrancesco Corti

��

System Card: Claude Opus 4 & Claude Sonnet 4Razin Mustafiz

��

With Claude 4, Anthropic redefines AI capabilities, effectively unleashing a ...SOFTTECHHUB

��

Content and eLearning Standards: Finding the Best Fit for Your-TrainingRustici Software

��

AI in Java - MCP in Action, Langchain4J-CDI, SmallRye-LLM, Spring AIBuhake Sindi

��

UiPath Community Zurich: Release Management and Build PipelinesUiPathCommunity

��

What is DePIN? The Hottest Trend in Web3 Right Now!cryptouniversityoffi

��

Splunk Leadership Forum Wien - 20.05.2025Splunk

��

Big Data Analytics Quick Research Guide by Arthur MorganArthur Morgan

��

cloudgenesis cloud workshop , gdg on campus mitasiyaldhande02

��

Tanveer

1. PPT 10-hr. General Industry – PPE v.03.01.17 1 Created by OTIEC Outreach Resources Workgroup Personal Protective Equipment

2. PPT 10-hr. General Industry – PPE v.03.01.17 2 Created by OTIEC Outreach Resources Workgroup Head protection: • Frequent causes of head injuries – Falling objects from above striking on the head; – Bump head against fixed objects, such as exposed pipes or beams; or – Accidental head contact with electrical hazards. Source: OSHA Types of PPE

3. PPT 10-hr. General Industry – PPE v.03.01.17 3 Created by OTIEC Outreach Resources Workgroup Types of PPE Why head protection is important… Source: OSHA

4. PPT 10-hr. General Industry – PPE v.03.01.17 4 Created by OTIEC Outreach Resources Workgroup Types of PPE Eye and face protection: Source of images: OSHA

5. PPT 10-hr. General Industry – PPE v.03.01.17 5 Created by OTIEC Outreach Resources Workgroup Source: OSHA • Common causes of eye injuries – Chemical splashes – Blood or OPIM splashes or sprays – Intense light – Dust and other flying particles – Molten metal splashes Types of PPE

6. PPT 10-hr. General Industry – PPE v.03.01.17 6 Created by OTIEC Outreach Resources Workgroup • Selecting eye and face protection – elements to consider: – Ability to protect against workplace hazards – Should fit properly – Should provide unrestricted vision and movement – Durable and cleanable – Allow unrestricted functioning of other PPE Types of PPE

7. PPT 10-hr. General Industry – PPE v.03.01.17 7 Created by OTIEC Outreach Resources Workgroup • Safety glasses – Used to protect against moderate impacts from particles Source of graphics: OSHA Types of PPE

8. PPT 10-hr. General Industry – PPE v.03.01.17 8 Created by OTIEC Outreach Resources Workgroup • Face shields – Protect face from nuisance dusts and potential splashes or sprays of hazardous liquids – Shields do not protect from impact hazards unless so rated – Shields are for face protection, not eye protection. To protect the eyes, wear safety glasses with side shields, or goggles under the face shield. Source: OSHA Types of PPE

9. PPT 10-hr. General Industry – PPE v.03.01.17 9 Created by OTIEC Outreach Resources Workgroup Source of photos: OSHA • Welding shields – Protect eyes from burns caused by: • Infared light • Intense radiant light – Protect eyes and face from flying sparks, metal spatter, and slag chips Types of PPE

10. PPT 10-hr. General Industry – PPE v.03.01.17 10 Created by OTIEC Outreach Resources Workgroup • Laser safety goggles – Provide protection from hazards: • physical contact such as flying particles • ultraviolet light, laser, and welding Source: OSHA Types of PPE

11. PPT 10-hr. General Industry – PPE v.03.01.17 11 Created by OTIEC Outreach Resources Workgroup Source of photos: OSHA Hearing protection: Types of PPE

12. PPT 10-hr. General Industry – PPE v.03.01.17 12 Created by OTIEC Outreach Resources Workgroup • Examples of hearing protection: – Disposable foam plugs – Molded ear plugs – Noise-cancelling ear plugs – Ear muffs • Consider Noise Reduction Rating (NRR) of devices NIOSH/John Rekus/elcosh.org Source of photos: OSHA Types of PPE

13. PPT 10-hr. General Industry – PPE v.03.01.17 13 Created by OTIEC Outreach Resources Workgroup Hand protection: Types of PPE • Potential hazards for hands – Skin absorption of hazardous substances – Lacerations or severe cuts – Punctures – Chemical burns – Thermal burns – Extreme temperatures Source of photos: OSHA

14. PPT 10-hr. General Industry – PPE v.03.01.17 14 Created by OTIEC Outreach Resources Workgroup Source of photos: OSHA Anti-vibration Heat-resistant Leather Palm Cut-resistant Permeation-resistant Chemical-resistant • Types of gloves Types of PPE

15. PPT 10-hr. General Industry – PPE v.03.01.17 15 Created by OTIEC Outreach Resources Workgroup Foot and leg protection: • Causes of foot injuries: – Falling or rolling of heavy objects – Crushing or penetrating materials – Sharp objects that can penetrate the sole – Exposure to molten metal – Working on, or around, hot, wet, or slippery surfaces – Working when electrical hazards are present. Source: OSHA Types of PPE

16. PPT 10-hr. General Industry – PPE v.03.01.17 16 Created by OTIEC Outreach Resources Workgroup • Examples of foot and leg protection – Impact-resistant toe and/or instep • Steel • Composite – Heat-resistant soles – Metal shanks – Specialty footwear may be needed • Metatarsal guards • Liquid- or chemical-resistant • Conductive or nonconductive Source of photos: OSHA Types of PPE

17. PPT 10-hr. General Industry – PPE v.03.01.17 17 Created by OTIEC Outreach Resources Workgroup

�ݺ�ߣ

Tanveer

Recommended

More Related Content

What's hot (12)

Similar to Tanveer (20)

Recently uploaded (20)

Tanveer