Swiss Fluid SBV Ball Valve
•
1 like•1,535 views
The document is a product manual for SBV series ball valves made by Swissfluid AG. The ball valves are full-port valves suited for positive shut-off, flow control, and throttling of corrosive, abrasive, or toxic process media in liquid or gaseous state. They have a modular design available in DIN or ANSI configurations with manual quarter turn operation or a bare shaft for actuator installation. The sturdy bodies are made of cast steel or stainless steel with resistant linings like PFA or PFA-AS. Main features include robust construction, bubble-tight shut-off, one-piece encapsulated ball and shaft, zero stem leakage, low operating torque, and maximum flow rates at low
Swiss Fluid SBV Ball Valve
- 1. PRODUCT MANUAL SBV: Product Info 23 Ball Valves, plastomer-lined PM 23 M.00 e January 2009 Swissfluid AG, Industriestrasse 40, CH-5600 Lenzburg/Switzerland info@swissfluid.ch Ball Valves SBV Series full-port Ideally suited for positive shut-off, flow control and throttling of corrosive, abrasive or even toxic process media in either liquid or gaseous state. Modular Design Ball Valves SBV Series are available as DIN- or ANSI-valves, with handlever for manual quarter turn opera- tion as per standard or with bare shaft for easy installation of actuator units. The sturdy design bodies are made of cast steel 1.0619 (WCB A216), RAL 5005 signal-blue epoxy-coated or compl. of SS316 casting 1.4408 (CF-8M), with resistant linings such as PFA or PFA-AS (conductive). Conformity according to European Pressure Equipment Directive 97/23/EC (PED) Main Features • Heavy-duty, robust construction, maintenance-free • Body halves friction-locked (metal-to-metal) • Bubble-tight shut-off throughout the full pressure and temperature range • One-piece ball/shaft, PFA-encapsulated • Zero stem leakage provided by an innovative stem sealing mechanism • Consistent low operating torque • Maximum flow rates at lowest pressure drops • Integrated ISO top flange for standard actuators • Flanges acc. to DIN PN10/16 resp. ANSI 150lbs for installation into existing piping systems Actuator Options Automated Body 1.0619 (WCB A216)/PFA-lined, pneumatic quarter turn actuator , DA or FC Stainless Steel Body 1.4408 (CF-8M)/PFA-lined, bare shaft Padlock Handlever on ISO top flange, with safety lock