1 of 41
Downloaded 20 times
Ad
Recommended
透析中低血压预测模型研究-翔安生医-胡翔崴博士-蔡瑞煌教授指导
透析中低血压预测模型研究-翔安生医-胡翔崴博士-蔡瑞煌教授指导JiunYi Yang
?
【專題重要性】
病患在做血液透析時，常見血壓下降問題；若無法即時處理低血壓，嚴重將會導致各種血管合併症。
【臨床問題】
血壓儀器的測量頻率最高只能每 30 分鐘一次，如何提前預測接下來 30 分鐘內是/否會發生低血壓，提早通知醫護人員？
【專題解決方案】
使用血壓量測歷史紀錄、血液透析數據及生理偵測穿戴式裝置數據等生理數據，進行 LSTM (Long short-term memory) 神經網絡建模，二元分類問題 預測下個時間點是/否會出現低血壓？第3回「国连机関への就职ガイダンス」议事録
第3回「国连机関への就职ガイダンス」议事録IDDP UK
?
【IDDP2008-09 第3回勉強会】 議事録
「国際機関就職ガイダンス」
日時： 2009年1月23日 ／サセックス大学
2009年1月24日 ／ロンドン大学SOAS
講師： 外務省在ジュネーブ国際機関日本政府代表部一等書記官 井手 亮氏
共催： 外務省、英国開発学勉強会（IDDP）
http://iddp.dreamblog.jp/2008 Asts Technical Paper Protocol Aware Ate Submitted
2008 Asts Technical Paper Protocol Aware Ate SubmittedEric Larson
?
1. Modern semiconductor devices often behave in a non-deterministic manner during testing on automatic test equipment (ATE) due to the use of asynchronous IP blocks and industry standard protocols.
2. Current ATE architectures assume deterministic behavior and have difficulty handling variations in timing and output order, resulting in long test times and inadequate fault coverage.
3. A proposed solution is a protocol aware ATE that can natively emulate real-time chip I/O at the protocol level, enabling more complete functional testing similar to "mission mode" operation.Cogent Ate D100 Presentation
Cogent Ate D100 PresentationWilliam Huo
?
科晶特自动测试科技(北京)有限公司成立于2008年，致力于为中国半导体市场提供高性价比的自动测试设备，其技术团队经验丰富，研发出具有行业领先技术的诲100产物，支持多工位并行测试，有效降低测试成本和提高效率。公司的目标是凭借创新和市场需求，不断扩大市场份额，立足国内市场并开拓国际市场，力争成为全球领域的领军者。随着半导体市场的快速发展，公司积极应对行业挑战，提供优化产物解决方案。ic test engineering cost down in China
ic test engineering cost down in Chinajulianjiang
?
This document describes ATE test services offered in China at significantly lower costs than in the US. Engineering hourly and weekly rates are 50% lower, and turn-key test solutions including test planning, debugging, programming, and production support are available. Customized solutions can further reduce costs for production testing through techniques like dedicated test modules that minimize loadboard layers and ATE instruments needed.More Related Content
What's hot (19)
透析中低血压预测模型研究-翔安生医-胡翔崴博士-蔡瑞煌教授指导
透析中低血压预测模型研究-翔安生医-胡翔崴博士-蔡瑞煌教授指导JiunYi Yang
?
【專題重要性】
病患在做血液透析時，常見血壓下降問題；若無法即時處理低血壓，嚴重將會導致各種血管合併症。
【臨床問題】
血壓儀器的測量頻率最高只能每 30 分鐘一次，如何提前預測接下來 30 分鐘內是/否會發生低血壓，提早通知醫護人員？
【專題解決方案】
使用血壓量測歷史紀錄、血液透析數據及生理偵測穿戴式裝置數據等生理數據，進行 LSTM (Long short-term memory) 神經網絡建模，二元分類問題 預測下個時間點是/否會出現低血壓？第3回「国连机関への就职ガイダンス」议事録
第3回「国连机関への就职ガイダンス」议事録IDDP UK
?
【IDDP2008-09 第3回勉強会】 議事録
「国際機関就職ガイダンス」
日時： 2009年1月23日 ／サセックス大学
2009年1月24日 ／ロンドン大学SOAS
講師： 外務省在ジュネーブ国際機関日本政府代表部一等書記官 井手 亮氏
共催： 外務省、英国開発学勉強会（IDDP）
http://iddp.dreamblog.jp/Viewers also liked (11)
2008 Asts Technical Paper Protocol Aware Ate Submitted
2008 Asts Technical Paper Protocol Aware Ate SubmittedEric Larson
?
1. Modern semiconductor devices often behave in a non-deterministic manner during testing on automatic test equipment (ATE) due to the use of asynchronous IP blocks and industry standard protocols.
2. Current ATE architectures assume deterministic behavior and have difficulty handling variations in timing and output order, resulting in long test times and inadequate fault coverage.
3. A proposed solution is a protocol aware ATE that can natively emulate real-time chip I/O at the protocol level, enabling more complete functional testing similar to "mission mode" operation.Cogent Ate D100 Presentation
Cogent Ate D100 PresentationWilliam Huo
?
科晶特自动测试科技(北京)有限公司成立于2008年，致力于为中国半导体市场提供高性价比的自动测试设备，其技术团队经验丰富，研发出具有行业领先技术的诲100产物，支持多工位并行测试，有效降低测试成本和提高效率。公司的目标是凭借创新和市场需求，不断扩大市场份额，立足国内市场并开拓国际市场，力争成为全球领域的领军者。随着半导体市场的快速发展，公司积极应对行业挑战，提供优化产物解决方案。ic test engineering cost down in China
ic test engineering cost down in Chinajulianjiang
?
This document describes ATE test services offered in China at significantly lower costs than in the US. Engineering hourly and weekly rates are 50% lower, and turn-key test solutions including test planning, debugging, programming, and production support are available. Customized solutions can further reduce costs for production testing through techniques like dedicated test modules that minimize loadboard layers and ATE instruments needed.Protocol Aware Ate Semi Submitted
Protocol Aware Ate Semi SubmittedEric Larson
?
The document discusses the benefits of protocol aware automatic test equipment (ATE) compared to traditional ATE. Protocol aware ATE would allow testers to interact with devices under test using the same protocol level of abstraction as designers, making testing easier and reducing development cycles. It provides examples showing how protocol aware ATE could speed up silicon bring-up and debug by enabling direct register reads and writes using protocols instead of low-level vectors. This would help address issues of non-deterministic device behavior from processes like cycle slipping.A100
A100William Huo
?
The document describes Cogent ATE's Leopard A Series Analog and Mixed-Signal Test System. It aims to provide low-cost, high-performance multi-site testing through its Floating Quad-Site Testing architecture. This allows independent testing of up to 4 devices simultaneously while avoiding interference through electrically isolated test sites. The system supports a wide range of analog and mixed-signal devices and can scale from single-site to multi-site testing through its Automatic Test Replication technology.Track g semiconductor test program - testinsight
Track g semiconductor test program - testinsightchiportal
?
This document discusses challenges in semiconductor testing and opportunities to improve test program management. It identifies issues such as lack of visibility into what is tested in production and which test program versions are used. It then proposes several solutions like enabling collaborative test development, enforcing company test methodologies, analyzing and merging test programs, and closing the loop between test program development and production to improve quality.Shmoo Quantify
Shmoo QuantifyDan Shu
?
This document discusses quantifying shmoo plot results by defining a metric called Shmoo Quality (SQ). SQ is defined as the area of the pass region in a shmoo plot. Quantifying SQ allows direct comparison of shmoo plots and trend analysis of SQ over time or process variations. An example is given where SQ is calculated for shmoo plots of three golden devices before and after changes, demonstrating up to 163% improved SQ. Quantifying shmoo results provides benefits for product and test engineering.AUTOMATED TESTING USING PYTHON (ATE)
AUTOMATED TESTING USING PYTHON (ATE)Yuvaraja Ravi
?
Automated hardware testing system using Python. The system includes an embedded test hardware module that can measure voltage, current, resistance and test protocols. Python scripts control the hardware, run test cases, collect results and generate reports. This provides a low-cost automated solution compared to expensive automated test equipment. Test reports show pass/fail results and help locate hardware and software issues.ATE Testers Overview
ATE Testers Overviewstn_tkiller
?
The document compares different types of testers used for debugging components, including S9K, IMS Vanguard, and CWMA testers, describing their key features such as speed, operating system, memory size, and capabilities for timing, patterns, and levels of testing. It also provides overviews of tester channel connections, functional test content and tools, and terms and definitions used for testing.ATE Pattern Structure Basics
ATE Pattern Structure Basicsstn_tkiller
?
A pattern is a collection of data that precisely describes the activity of each tester pin at bus clock resolution. It is generated from a test simulation trace and is specific to each tester. A pattern contains pindefs, vecdefs, vectors, comments and labels. Pindefs define the connection between pattern data and tester channels. Vecdefs define the sequences for each pin. Vectors contain the actual tester data for each period. Comments provide information and labels allow jumping to specific points. Patterns contain reset/initialization routines, the test pattern itself with multiple vectors, and subroutine memory.Ad