ºÝºÝߣ

ºÝºÝߣShare a Scribd company logo

Rn qts dev_support

?
?
Hendrik Moch Yusro
Hendrik Moch Yusro

The document provides information about device support in Altera's Quartus II version 11.1 software. It lists devices that have full, advance, and initial support. It also discusses memory recommendations for design processing and provides a summary of the status of timing and power models for supported devices.

1 of 10
Download to read offline
Quartus II Software Version 11.1 Device Support RN-01068 Release Notes This document provides late-breaking information about device support in the Altera? Quartus? II software version 11.1. For information about disk space and system requirements, refer to the readme.txt file in your altera/<version number>/quartus directory. For information about new features, EDA Tool version support, and existing and resolved software issues, refer to the Quartus II Software Release Notes. This document contains the following sections: ¡ö ¡°Device Support and Pin-Out Status¡± on page 1 ¡ö ¡°Memory Recommendations¡± on page 3 ¡ö ¡°Timing and Power Models¡± on page 6 ¡ö ¡°Changes in Device Support¡± on page 7 Device Support and Pin-Out Status This section contains information about the device support status in the Quartus II software version 11.1. Full Device Support Full compilation, simulation, timing analysis, and programming support is now available for the following new devices and device packages: Table 1. Devices with Full Support Device Family Devices Stratix? V 5SGXEA7ES 5SGTMC7ES ? 2011 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as trademarks or service marks are the property of their respective holders as described at www.altera.com/common/legal.html. Altera warrants performance of its semiconductor ISO 101 Innovation Drive products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any 9001:2008 products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use Registered San Jose, CA 95134 of any information, product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are www.altera.com advised to obtain the latest version of device specifications before relying on any published information and before placing orders for products or services. November 2011 Altera Corporation
Page 2 Device Support and Pin-Out Status Advance Device Support Compilation, simulation, and timing analysis support is provided for the devices listed in Table 2 that will be released in the near future. The Compiler generates pin- out information for these devices in this release, but does not generate programming files. Table 2. Devices with Advance Support Device Family Devices 5AGXBB1 5AGXBB3 5AGXBB5 5AGXBB7 5AGXFB1 5AGXFB3 Arria V ? 5AGXFB5 5AGXFB7 5AGXFB3ES 5AGXMB1 5AGXMB3 5AGXMB3ES 5AGXMB5 5AGXMB7 5SGTMC5 5SGTMC7 5SGXEA5 5SGXEA7 5SGXEB5 5SGXEB6 Stratix V 5SGXEB6ES 5SGXMA5 5SGXMA7 5SGXMB5 5SGXMB6 Initial Information Device Support Compilation, simulation, and timing analysis support is provided for the devices listed in Table 3 that will be released in upcoming versions of the Quartus II software. Programming files and pin-out information are not generated for these devices in this release. Table 3. Devices with Initial Information Support Device Family Devices Cyclone ? V 5CGXBC7 5CGXFC7 5SGSED6 5SGSED8 5SGSMD3 5SGSMD4 5SGSMD5 5SGSMD6 5SGSMD8 5SGXEAB Stratix V 5SGXEA3 5SGXEA4 5SGXEA9 5SGXMAB 5SGXMA3 5SGXMA4 5SGXMA9 Quartus II Software Version 11.1 Device Support November 2011 Altera Corporation
Memory Recommendations Page 3 Memory Recommendations A full installation of the Altera software requires up to 10 GB of available disk space on the drive or partition where you are installing the Altera software. The Quartus II Stand-Alone Programmer requires a minimum of 1 GB of RAM plus additional memory, based on the size and number of .sof files and the size and number of devices being configured. Altera recommends that your system be configured to provide virtual memory equal to the recommended physical RAM that is required to process your design. Table 4 lists the memory required to process designs targeted for Altera devices. Table 4. Memory Recommendations Recommended Physical RAM Family Device 32-bit 64-bit EP1AGX20 512 MB 512 MB EP1AGX35, Arria GX 1.0 GB 1.5 GB EP1AGX50, EP1AGX60 EP1AGX90 1.5 GB 2.0 GB EP2AGX45 1.0 GB 1.5 GB EP2AGX65 1.5 GB 2.0 GB Arria II GX EP2AGX95, EP2AGX125, 3.0 GB 4.0 GB EP2AGX190 EP2AGX260 4.0 GB 6.0 GB EP2AGZ225 3.0 GB 4.0 GB Arria II GZ EP2AGZ300 4.0 GB 6.0 GB EP2AGZ350 N/A 8.0 GB 5AGXB1 8.0 GB 5AGXB3 Arria V N/A 5AGXB5 12.0 GB 5AGXB7 Cyclone All 512 MB 512 MB EP2C5, EP2C8, 512 MB 512 MB EP2C15, EP2C20 Cyclone II EP2C35, EP2C50 1.0 GB 1.5 GB EP2C70 1.5 GB 2.0 GB EP3C5, EP3C10, EP3C16, EP3C25, 512 MB 512 MB Cyclone III EP3C40 EP3C55, EP3C80 768 MB 1.0 GB EP3C120 1.5 GB 2.0 GB November 2011 Altera Corporation Quartus II Software Version 11.1 Device Support
Page 4 Memory Recommendations Table 4. Memory Recommendations (Continued) Recommended Physical RAM Family Device 32-bit 64-bit EP3CLS70, 1.5 GB 2.0 GB EP3CLS100 Cyclone III LS EP3CLS150, 3.0 GB 4.0 GB EP3CLS200 EP4CE6, EP4CE10, EP4CE15, EP4CE22, 512 MB 512 MB Cyclone IV E EP4CE30, EP4CE40 EP4CE55, EP4CE75 768 MB 1.0 GB EP4CE115 1.0 GB 1.5 GB EP4CGX15, 512 MB 512 MB EP4CGX22, EP4CGX30 Cyclone IV GX EP4CGX50, EP4CGX75 1.0 GB 1.5 GB EP4CGX110, 1.5 GB 2.0 GB EP4CGX150 Cyclone V 5CGXC7 3.0 GB 4.0 GB HC210, HC210W 1.5 GB 2.0 GB HardCopy ? II HC220, HC230, HC240 3.0 GB 4.0 GB HC325 8.0 GB HardCopy III N/A HC335 12.0 GB HC4E25 8.0 GB HC4GX15 12.0 GB HardCopy IV N/A HC4E35, HC4GX25 16.0 GB HC4GX35 20.0 GB MAX ? All 512 MB 512 MB MAX II All 512 MB 512 MB MAX V All 512 MB 512 MB EP1S10, EP1S20 512 MB 512 MB EP1S25, EP1S30, Stratix 1.0 GB 1.5 GB EP1S40, EP1S60 EP1S80 1.5 GB 2.0 GB EP1SGX10 512 MB 512 MB Stratix GX EP1SGX25, EP1SGX40 1.0 GB 1.5 GB EP2S15 512 MB 512 MB EP2S30 1.0 GB 1.5 GB Stratix II EP2S60, EP2S90 1.5 GB 2.0 GB EP2S130, EP2S180 3.0 GB 4.0 GB EP2SGX30, EP2SGX60 1.0 GB 1.5 GB Stratix II GX EP2SGX90 1.5 GB 2.0 GB EP2SGX130 3.0 GB 4.0 GB Quartus II Software Version 11.1 Device Support November 2011 Altera Corporation
Memory Recommendations Page 5 Table 4. Memory Recommendations (Continued) Recommended Physical RAM Family Device 32-bit 64-bit EP3SL50, EP3SE50, 1.0 GB 1.5 GB EP3SL70 EP3SE80 1.5 GB 2.0 GB Stratix III EP3SL110, EP3SE110, 3.0 GB 4.0 GB EP3SL150, EP3SL200 EP3SE260, EP3SL340 4.0 GB 6.0 GB EP4SGX70 1.5 GB 2.0 GB EP4SE230 EP4SGX110, EP4SGX230, 3.0 GB 4.0 GB EP4S40G2, EP4S100G2 EP4SGX290 4.0 GB 6.0 GB Stratix IV EP4SE360 EP4SGX360, N/A 8.0 GB EP4S100G3, EP4S100G4 EP4SGX530, EP4SE530, EP4SE820, N/A 12.0 GB EP4S40G5, EP4S100G5 5SGXA3, 5SGXA4, 5SGSD3, 5SGSD4, N/A 12.0 GB 5SGTC5 5SGXA5, 5SGXB5, N/A 16.0 GB 5SGSD5 Stratix V 5SGXA7, 5SGXB6, 5SGSD6, 5SGSD8, N/A 20.0 GB 5SGTC7 5SGXA9, 5SGXAB N/A 24.0 GB 5SEE9, 5SEEB N/A 28.0 GB November 2011 Altera Corporation Quartus II Software Version 11.1 Device Support
Page 6 Timing and Power Models Timing and Power Models Table 5 lists a summary of timing and power model status in the current version of the Quartus II software. Table 5. Devices with Timing and Power Models Device Family Device Timing Model Status Power Model Status EP2AGX45 EP2AGX65 Final ¨C 10.0 EP2AGX95 Arria II GX Final ¨C 10.0 EP2AGX125 EP2AGX190 Final ¨C 10.0 SP1 EP2AGX260 Arria II GZ All Final ¨C 10.1 Final ¨C 10.1 Arria V All Preliminary Preliminary EPC3LS70 EPC3LS100 Final ¨C 10.0 Final ¨C 10.0 SP1 Cyclone III LS EPC3LS150 EPC3LS200 All 1.0V Final ¨C 10.0 SP1 Cyclone IV E Final ¨C 10.0 SP1 All 1.2V Final ¨C 10.0 EP4CGX15 Final ¨C 10.1 Final ¨C 11.0 EP4CGX22 Final ¨C 11.0 EP4CGX30 Final ¨C (1) Cyclone IV GX EP4CGX50 Final ¨C 11.0 Final ¨C11.1 EP4CGX75 EP4CGX110 Final ¨C 10.1 Final ¨C 11.0 EP4CGX150 Cyclone V All Preliminary Preliminary HardCopy III All Correlated ¨C 11.1 Preliminary HardCopy IV E All Correlated ¨C 11.1 Preliminary HardCopy IV GX All Correlated ¨C 11.1 Preliminary MAX V All Final ¨C 11.0 Final ¨C 11.0 Quartus II Software Version 11.1 Device Support November 2011 Altera Corporation
Changes in Device Support Page 7 Table 5. Devices with Timing and Power Models (Continued) Device Family Device Timing Model Status Power Model Status EP4SE230 EP4SGX180 EP4SGX230 Final ¨C 9.1 SP1 EP4S40G2 EP4S100G2 EP4SE360 EP4SE530 Final ¨C 10.0 EP4SGX290 Stratix IV EP4SGX360 EP4SGX530 Final ¨C 9.1 SP2 EP4S40G5 EP4S100G3 EP4S100G4 EP4S100G5 EP4SGX70 Final ¨C 10.0 EP4SGX110 Final ¨C 10.1 EP4SE820 Final ¨C 10.0 SP1 Stratix V All Preliminary Preliminary (1) EP4CGX30BF14 and EP4CGX30CF19 are final in 11.0, EP4CGX30CF23 final in 11.1. The current version of the Quartus II software also includes final timing and power models for the Arria GX, Cyclone, Cyclone II, Cyclone III, HardCopy II, MAX, MAX II, MAX IIZ, Stratix, Stratix GX, Stratix II, Stratix II GX, and Stratix III device families. Timing models for these device families became final in the Quartus II software versions 9.0 and earlier. Changes in Device Support The following section is divided into device support changes according to whether the change is a notification, or whether the change has been fixed or not fixed. Change Notifications This section provides notifications for changes to devices. Cyclone IV GX slew rate change The transceiver slew rate settings are updated for Cyclone IV GX devices to meet specifications. Applies to: Cyclone IV GX devices November 2011 Altera Corporation Quartus II Software Version 11.1 Device Support
Page 8 Changes in Device Support Arria II GZ pin mark change For Arria II GZ F1517 packages, the 24 pins listed were previously marked as GXB_NC in the Quartus II software pin file. These pins are now marked as NC and you should leave them unconnected. The affected devices include EP2AGZ225HF40, EP2AGZ300HF40, and EP2AGZ350HF40. These are the Arria II GZ devices in the F1517 (F40) package. Applies to: Arria II GZ devices Stratix IV pin file changes In pin files that are generated by the Quartus II software version 11.0, you can observe the following changes as compared to the previously generated pin files. The affected devices include Stratix IV EP4SGX290/360 FH29 devices and all Stratix IV GT devices. Certain pins that you could use in configuration mode only or for their JTAG functionality, now show the corresponding functions in the pin file. Previously, they appeared as the GND* pin. You might see similar changes in the Pin Planner. Only the reported names changed; the underlying functionality and the placement remain the same. Applies to: Stratix IV devices Final timing model change for Cyclone IV E The fast corner timing model was updated to reflect a smaller minimum pulse width. This timing model update results in a higher fM AX limit when analyzing under the fast corner operating condition. This fix will remove the false warning ¡°minimum pulse width violation¡± in timing reports. If your design passes timing checks in existing designs, no action is required. Designs that do not pass all timing checks before this update should employ the necessary timing closure techniques to ensure all timing checks pass. Applies to: Cyclone IV E devices Device Support Not Fixed For the latest known issues related to the Quartus II software, refer to the Knowledge Base: http://www.altera.com/support/kdb/kdb-search.jsp Arria V change to pin tables Description In the Quartus II software version 11.1, for Arria V devices 5AGXB3 and 5AGXB1 F1517 the pinouts have been changed as follows: ¡ö R9 changed from NC to VccD ¡ö T31 changed from NC to VccD ¡ö U9 changed from NC to VccA ¡ö V31 changed from NC to VccA Quartus II Software Version 11.1 Device Support November 2011 Altera Corporation
Changes in Device Support Page 9 Workaround This change only affects you if you plan to migrate your design from either an 5AGXB1 or 5AGXB3 device to either an 5AGXB7 or 5AGXB5 F1517 device. Without this change, when you migrate your design it will lack the four fractional PLLs. This change has no impact if you do not migrate your design. Applies to Arria V devices Negative pin location assignments not supported for MAX V LVDS pair Description The Quartus II software does not support pin location assignments for the negative pin of an LVDS pair for MAX V devices. Workaround Assign positive pins. Applies to MAX V devices ALTGXB not supported for Stratix GX designs Description The Quartus II software version 10.0 and later does not support creating or updating the ALTGXB megafunction for Stratix GX devices. Workaround Use an earlier version of the Quartus II software to create or update Stratix GX designs using the GXB transceivers. Applies to Stratix GX devices November 2011 Altera Corporation Quartus II Software Version 11.1 Device Support
Page 10 Changes in Device Support Quartus II Software Version 11.1 Device Support November 2011 Altera Corporation

More Related Content

Rn qts dev_support

  • 1. Quartus II Software Version 11.1 Device Support RN-01068 Release Notes This document provides late-breaking information about device support in the Altera? Quartus? II software version 11.1. For information about disk space and system requirements, refer to the readme.txt file in your altera/<version number>/quartus directory. For information about new features, EDA Tool version support, and existing and resolved software issues, refer to the Quartus II Software Release Notes. This document contains the following sections: ¡ö ¡°Device Support and Pin-Out Status¡± on page 1 ¡ö ¡°Memory Recommendations¡± on page 3 ¡ö ¡°Timing and Power Models¡± on page 6 ¡ö ¡°Changes in Device Support¡± on page 7 Device Support and Pin-Out Status This section contains information about the device support status in the Quartus II software version 11.1. Full Device Support Full compilation, simulation, timing analysis, and programming support is now available for the following new devices and device packages: Table 1. Devices with Full Support Device Family Devices Stratix? V 5SGXEA7ES 5SGTMC7ES ? 2011 Altera Corporation. All rights reserved. ALTERA, ARRIA, CYCLONE, HARDCOPY, MAX, MEGACORE, NIOS, QUARTUS and STRATIX words and logos are trademarks of Altera Corporation and registered in the U.S. Patent and Trademark Office and in other countries. All other words and logos identified as trademarks or service marks are the property of their respective holders as described at www.altera.com/common/legal.html. Altera warrants performance of its semiconductor ISO 101 Innovation Drive products to current specifications in accordance with Altera's standard warranty, but reserves the right to make changes to any 9001:2008 products and services at any time without notice. Altera assumes no responsibility or liability arising out of the application or use Registered San Jose, CA 95134 of any information, product, or service described herein except as expressly agreed to in writing by Altera. Altera customers are www.altera.com advised to obtain the latest version of device specifications before relying on any published information and before placing orders for products or services. November 2011 Altera Corporation
  • 2. Page 2 Device Support and Pin-Out Status Advance Device Support Compilation, simulation, and timing analysis support is provided for the devices listed in Table 2 that will be released in the near future. The Compiler generates pin- out information for these devices in this release, but does not generate programming files. Table 2. Devices with Advance Support Device Family Devices 5AGXBB1 5AGXBB3 5AGXBB5 5AGXBB7 5AGXFB1 5AGXFB3 Arria V ? 5AGXFB5 5AGXFB7 5AGXFB3ES 5AGXMB1 5AGXMB3 5AGXMB3ES 5AGXMB5 5AGXMB7 5SGTMC5 5SGTMC7 5SGXEA5 5SGXEA7 5SGXEB5 5SGXEB6 Stratix V 5SGXEB6ES 5SGXMA5 5SGXMA7 5SGXMB5 5SGXMB6 Initial Information Device Support Compilation, simulation, and timing analysis support is provided for the devices listed in Table 3 that will be released in upcoming versions of the Quartus II software. Programming files and pin-out information are not generated for these devices in this release. Table 3. Devices with Initial Information Support Device Family Devices Cyclone ? V 5CGXBC7 5CGXFC7 5SGSED6 5SGSED8 5SGSMD3 5SGSMD4 5SGSMD5 5SGSMD6 5SGSMD8 5SGXEAB Stratix V 5SGXEA3 5SGXEA4 5SGXEA9 5SGXMAB 5SGXMA3 5SGXMA4 5SGXMA9 Quartus II Software Version 11.1 Device Support November 2011 Altera Corporation
  • 3. Memory Recommendations Page 3 Memory Recommendations A full installation of the Altera software requires up to 10 GB of available disk space on the drive or partition where you are installing the Altera software. The Quartus II Stand-Alone Programmer requires a minimum of 1 GB of RAM plus additional memory, based on the size and number of .sof files and the size and number of devices being configured. Altera recommends that your system be configured to provide virtual memory equal to the recommended physical RAM that is required to process your design. Table 4 lists the memory required to process designs targeted for Altera devices. Table 4. Memory Recommendations Recommended Physical RAM Family Device 32-bit 64-bit EP1AGX20 512 MB 512 MB EP1AGX35, Arria GX 1.0 GB 1.5 GB EP1AGX50, EP1AGX60 EP1AGX90 1.5 GB 2.0 GB EP2AGX45 1.0 GB 1.5 GB EP2AGX65 1.5 GB 2.0 GB Arria II GX EP2AGX95, EP2AGX125, 3.0 GB 4.0 GB EP2AGX190 EP2AGX260 4.0 GB 6.0 GB EP2AGZ225 3.0 GB 4.0 GB Arria II GZ EP2AGZ300 4.0 GB 6.0 GB EP2AGZ350 N/A 8.0 GB 5AGXB1 8.0 GB 5AGXB3 Arria V N/A 5AGXB5 12.0 GB 5AGXB7 Cyclone All 512 MB 512 MB EP2C5, EP2C8, 512 MB 512 MB EP2C15, EP2C20 Cyclone II EP2C35, EP2C50 1.0 GB 1.5 GB EP2C70 1.5 GB 2.0 GB EP3C5, EP3C10, EP3C16, EP3C25, 512 MB 512 MB Cyclone III EP3C40 EP3C55, EP3C80 768 MB 1.0 GB EP3C120 1.5 GB 2.0 GB November 2011 Altera Corporation Quartus II Software Version 11.1 Device Support
  • 4. Page 4 Memory Recommendations Table 4. Memory Recommendations (Continued) Recommended Physical RAM Family Device 32-bit 64-bit EP3CLS70, 1.5 GB 2.0 GB EP3CLS100 Cyclone III LS EP3CLS150, 3.0 GB 4.0 GB EP3CLS200 EP4CE6, EP4CE10, EP4CE15, EP4CE22, 512 MB 512 MB Cyclone IV E EP4CE30, EP4CE40 EP4CE55, EP4CE75 768 MB 1.0 GB EP4CE115 1.0 GB 1.5 GB EP4CGX15, 512 MB 512 MB EP4CGX22, EP4CGX30 Cyclone IV GX EP4CGX50, EP4CGX75 1.0 GB 1.5 GB EP4CGX110, 1.5 GB 2.0 GB EP4CGX150 Cyclone V 5CGXC7 3.0 GB 4.0 GB HC210, HC210W 1.5 GB 2.0 GB HardCopy ? II HC220, HC230, HC240 3.0 GB 4.0 GB HC325 8.0 GB HardCopy III N/A HC335 12.0 GB HC4E25 8.0 GB HC4GX15 12.0 GB HardCopy IV N/A HC4E35, HC4GX25 16.0 GB HC4GX35 20.0 GB MAX ? All 512 MB 512 MB MAX II All 512 MB 512 MB MAX V All 512 MB 512 MB EP1S10, EP1S20 512 MB 512 MB EP1S25, EP1S30, Stratix 1.0 GB 1.5 GB EP1S40, EP1S60 EP1S80 1.5 GB 2.0 GB EP1SGX10 512 MB 512 MB Stratix GX EP1SGX25, EP1SGX40 1.0 GB 1.5 GB EP2S15 512 MB 512 MB EP2S30 1.0 GB 1.5 GB Stratix II EP2S60, EP2S90 1.5 GB 2.0 GB EP2S130, EP2S180 3.0 GB 4.0 GB EP2SGX30, EP2SGX60 1.0 GB 1.5 GB Stratix II GX EP2SGX90 1.5 GB 2.0 GB EP2SGX130 3.0 GB 4.0 GB Quartus II Software Version 11.1 Device Support November 2011 Altera Corporation
  • 5. Memory Recommendations Page 5 Table 4. Memory Recommendations (Continued) Recommended Physical RAM Family Device 32-bit 64-bit EP3SL50, EP3SE50, 1.0 GB 1.5 GB EP3SL70 EP3SE80 1.5 GB 2.0 GB Stratix III EP3SL110, EP3SE110, 3.0 GB 4.0 GB EP3SL150, EP3SL200 EP3SE260, EP3SL340 4.0 GB 6.0 GB EP4SGX70 1.5 GB 2.0 GB EP4SE230 EP4SGX110, EP4SGX230, 3.0 GB 4.0 GB EP4S40G2, EP4S100G2 EP4SGX290 4.0 GB 6.0 GB Stratix IV EP4SE360 EP4SGX360, N/A 8.0 GB EP4S100G3, EP4S100G4 EP4SGX530, EP4SE530, EP4SE820, N/A 12.0 GB EP4S40G5, EP4S100G5 5SGXA3, 5SGXA4, 5SGSD3, 5SGSD4, N/A 12.0 GB 5SGTC5 5SGXA5, 5SGXB5, N/A 16.0 GB 5SGSD5 Stratix V 5SGXA7, 5SGXB6, 5SGSD6, 5SGSD8, N/A 20.0 GB 5SGTC7 5SGXA9, 5SGXAB N/A 24.0 GB 5SEE9, 5SEEB N/A 28.0 GB November 2011 Altera Corporation Quartus II Software Version 11.1 Device Support
  • 6. Page 6 Timing and Power Models Timing and Power Models Table 5 lists a summary of timing and power model status in the current version of the Quartus II software. Table 5. Devices with Timing and Power Models Device Family Device Timing Model Status Power Model Status EP2AGX45 EP2AGX65 Final ¨C 10.0 EP2AGX95 Arria II GX Final ¨C 10.0 EP2AGX125 EP2AGX190 Final ¨C 10.0 SP1 EP2AGX260 Arria II GZ All Final ¨C 10.1 Final ¨C 10.1 Arria V All Preliminary Preliminary EPC3LS70 EPC3LS100 Final ¨C 10.0 Final ¨C 10.0 SP1 Cyclone III LS EPC3LS150 EPC3LS200 All 1.0V Final ¨C 10.0 SP1 Cyclone IV E Final ¨C 10.0 SP1 All 1.2V Final ¨C 10.0 EP4CGX15 Final ¨C 10.1 Final ¨C 11.0 EP4CGX22 Final ¨C 11.0 EP4CGX30 Final ¨C (1) Cyclone IV GX EP4CGX50 Final ¨C 11.0 Final ¨C11.1 EP4CGX75 EP4CGX110 Final ¨C 10.1 Final ¨C 11.0 EP4CGX150 Cyclone V All Preliminary Preliminary HardCopy III All Correlated ¨C 11.1 Preliminary HardCopy IV E All Correlated ¨C 11.1 Preliminary HardCopy IV GX All Correlated ¨C 11.1 Preliminary MAX V All Final ¨C 11.0 Final ¨C 11.0 Quartus II Software Version 11.1 Device Support November 2011 Altera Corporation
  • 7. Changes in Device Support Page 7 Table 5. Devices with Timing and Power Models (Continued) Device Family Device Timing Model Status Power Model Status EP4SE230 EP4SGX180 EP4SGX230 Final ¨C 9.1 SP1 EP4S40G2 EP4S100G2 EP4SE360 EP4SE530 Final ¨C 10.0 EP4SGX290 Stratix IV EP4SGX360 EP4SGX530 Final ¨C 9.1 SP2 EP4S40G5 EP4S100G3 EP4S100G4 EP4S100G5 EP4SGX70 Final ¨C 10.0 EP4SGX110 Final ¨C 10.1 EP4SE820 Final ¨C 10.0 SP1 Stratix V All Preliminary Preliminary (1) EP4CGX30BF14 and EP4CGX30CF19 are final in 11.0, EP4CGX30CF23 final in 11.1. The current version of the Quartus II software also includes final timing and power models for the Arria GX, Cyclone, Cyclone II, Cyclone III, HardCopy II, MAX, MAX II, MAX IIZ, Stratix, Stratix GX, Stratix II, Stratix II GX, and Stratix III device families. Timing models for these device families became final in the Quartus II software versions 9.0 and earlier. Changes in Device Support The following section is divided into device support changes according to whether the change is a notification, or whether the change has been fixed or not fixed. Change Notifications This section provides notifications for changes to devices. Cyclone IV GX slew rate change The transceiver slew rate settings are updated for Cyclone IV GX devices to meet specifications. Applies to: Cyclone IV GX devices November 2011 Altera Corporation Quartus II Software Version 11.1 Device Support
  • 8. Page 8 Changes in Device Support Arria II GZ pin mark change For Arria II GZ F1517 packages, the 24 pins listed were previously marked as GXB_NC in the Quartus II software pin file. These pins are now marked as NC and you should leave them unconnected. The affected devices include EP2AGZ225HF40, EP2AGZ300HF40, and EP2AGZ350HF40. These are the Arria II GZ devices in the F1517 (F40) package. Applies to: Arria II GZ devices Stratix IV pin file changes In pin files that are generated by the Quartus II software version 11.0, you can observe the following changes as compared to the previously generated pin files. The affected devices include Stratix IV EP4SGX290/360 FH29 devices and all Stratix IV GT devices. Certain pins that you could use in configuration mode only or for their JTAG functionality, now show the corresponding functions in the pin file. Previously, they appeared as the GND* pin. You might see similar changes in the Pin Planner. Only the reported names changed; the underlying functionality and the placement remain the same. Applies to: Stratix IV devices Final timing model change for Cyclone IV E The fast corner timing model was updated to reflect a smaller minimum pulse width. This timing model update results in a higher fM AX limit when analyzing under the fast corner operating condition. This fix will remove the false warning ¡°minimum pulse width violation¡± in timing reports. If your design passes timing checks in existing designs, no action is required. Designs that do not pass all timing checks before this update should employ the necessary timing closure techniques to ensure all timing checks pass. Applies to: Cyclone IV E devices Device Support Not Fixed For the latest known issues related to the Quartus II software, refer to the Knowledge Base: http://www.altera.com/support/kdb/kdb-search.jsp Arria V change to pin tables Description In the Quartus II software version 11.1, for Arria V devices 5AGXB3 and 5AGXB1 F1517 the pinouts have been changed as follows: ¡ö R9 changed from NC to VccD ¡ö T31 changed from NC to VccD ¡ö U9 changed from NC to VccA ¡ö V31 changed from NC to VccA Quartus II Software Version 11.1 Device Support November 2011 Altera Corporation
  • 9. Changes in Device Support Page 9 Workaround This change only affects you if you plan to migrate your design from either an 5AGXB1 or 5AGXB3 device to either an 5AGXB7 or 5AGXB5 F1517 device. Without this change, when you migrate your design it will lack the four fractional PLLs. This change has no impact if you do not migrate your design. Applies to Arria V devices Negative pin location assignments not supported for MAX V LVDS pair Description The Quartus II software does not support pin location assignments for the negative pin of an LVDS pair for MAX V devices. Workaround Assign positive pins. Applies to MAX V devices ALTGXB not supported for Stratix GX designs Description The Quartus II software version 10.0 and later does not support creating or updating the ALTGXB megafunction for Stratix GX devices. Workaround Use an earlier version of the Quartus II software to create or update Stratix GX designs using the GXB transceivers. Applies to Stratix GX devices November 2011 Altera Corporation Quartus II Software Version 11.1 Device Support
  • 10. Page 10 Changes in Device Support Quartus II Software Version 11.1 Device Support November 2011 Altera Corporation