際際滷

際際滷Share a Scribd company logo

Fiber optics

Download as PPT, PDF
Laxmi Meena
Laxmi Meena

Fiber optic cables transmit digital information over long distances using thin strands of glass. They work by total internal reflection of light signals within the glass core. Fiber optic cables have a core, cladding, and protective buffer coating. They transmit light using either single-mode or multi-mode fibers and technologies like DWDM increase bandwidth capacity. Fiber optics provide advantages like high bandwidth, low signal degradation, and flexibility for uses like telecommunications, medical imaging, and industrial inspection.

1 of 26
Downloaded 15 times
Fiber Optics
Introduction You hear about fiber-optic cables whenever people talk about the telephone system, the cable TV system or the Internet. Fiber-optic lines are strands of optically pure glass as thin as a human hair that carry digital information over long distances. They are also used in medical imaging and mechanical engineering inspection.
What are Fiber Optics? Fiber optics (optical fibers) are long, thin strands of very pure glass about the diameter of a human hair. They are arranged in bundles called optical cables and used to transmit light signals over long distances.
What are Fiber Optics? If you look closely at a single optical fiber, you will see that it has the following parts: Core - Thin glass center of the fiber where the light travels Cladding - Outer optical material surrounding the core that reflects the light back into the core Buffer coating - Plastic coating that protects the fiber from damage and moisture
Fiber Optics glass or plastic plastic jacket fiber core cladding TOTAL INTERNAL REFLECTION
What are Fiber Optics?
Fiber Optic Cables SOURCE: SURFNET.NL
What are Fiber Optics? Single-mode fibers have small cores (about 3.5 x 10- 4 inches or 9 microns in diameter) and transmit infrared laser light (wavelength = 1,300 to 1,550 nanometers). Multi-mode fibers have larger cores (about 2.5 x 10-3 inches or 62.5 microns in diameter) and transmit infrared light (wavelength = 850 to 1,300 nm) from light-emitting diodes (LEDs). Some optical fibers can be made from plastic . These fibers have a large core (0.04 inches or 1 mm diameter) and transmit visible red light (wavelength = 650 nm) from LEDs.
How Does an Optical Fiber Transmit Light? Suppose you want to shine a flashlight beam down a long, straight hallway. Just point the beam straight down the hallway -- light travels in straight lines, so it is no problem. What if the hallway has a bend in it? You could place a mirror at the bend to reflect the light beam around the corner. What if the hallway is very winding with multiple bends? You might line the walls with mirrors and angle the beam so that it bounces from side-to-side all along the hallway. This is exactly what happens in an optical fiber.
How Does an Optical Fiber Transmit Light?
How Does an Optical Fiber Transmit Light? The light in a fiber-optic cable travels through the core (hallway) by constantly bouncing from the cladding (mirror-lined walls), a principle called total internal reflection . Because the cladding does not absorb any light from the core, the light wave can travel great distances. However, some of the light signal degrades within the fiber, mostly due to impurities in the glass. The extent that the signal degrades depends on the purity of the glass and the wavelength of the transmitted light
Dense Wave-Division Multiplexing (DWDM) 1 Multiple colors (frequencies) sent 2 through the fiber at the same time, 3 more than 100 - - - Each color carries a separate signal N Allows huge bandwidth
Advantages of Fiber Optics Less expensive . Thinner Higher carrying capacity Less signal degradation Light signals Low power Digital signals Non-flammable Lightweight Flexible Medical imaging - in bronchoscopes, endoscopes, laparoscopes Mechanical imaging - inspecting mechanical welds in pipes and engines (in airplanes, rockets, space shuttles, cars) Plumbing - to inspect sewer lines
How Are Optical Fibers Made? Now that we know how fiber-optic systems work and why they are useful -- how do they make them? Optical fibers are made of extremely pure optical glass . We think of a glass window as transparent, but the thicker the glass gets, the less transparent it becomes due to impurities in the glass. However, the glass in an optical fiber has far fewer impurities than window-pane glass. One company's description of the quality of glass is as follows: If you were on top of an ocean that is miles of solid core optical fiber glass, you could see the bottom clearly.
How Are Optical Fibers Made? Making optical fibers requires the following steps: Making a preform glass cylinder Drawing the fibers from the preform Testing the fibers
Making the Preform Blank The glass for the preform is made by a process called modified chemical vapor deposition (MCVD).
Making the Preform Blank In MCVD, oxygen is bubbled through solutions of silicon chloride (SiCl4), germanium chloride (GeCl4) and/or other chemicals. The precise mixture governs the various physical and optical properties (index of refraction, coefficient of expansion, melting point, etc.). The gas vapors are then conducted to the inside of a synthetic silica or quartz tube (cladding) in a special lathe . As the lathe turns, a torch is moved up and down the outside of the tube.
Making the Preform Blank The extreme heat from the torch causes two things to happen: The silicon and germanium react with oxygen, forming silicon dioxide (SiO2) and germanium dioxide (GeO2). The silicon dioxide and germanium dioxide deposit on the inside of the tube and fuse together to form glass
Making the Preform Blank The lathe turns continuously to make an even coating and consistent blank. The purity of the glass is maintained by using corrosion- resistant plastic in the gas delivery system (valve blocks, pipes, seals) and by precisely controlling the flow and composition of the mixture. The process of making the preform blank is highly automated and takes several hours. After the preform blank cools, it is tested for quality control.
Drawing Fibers from the Preform Blank Once the preform blank has been tested, it gets loaded into a fiber drawing tower . Diagram of a fiber drawing tower used to draw optical glass fibers from a preform blank. The blank gets lowered into a graphite furnace (3,452 to 3,992 degrees Fahrenheit or 1,900 to 2,200 degrees Celsius) and the tip gets melted until a molten glob falls down by gravity. As it drops, it cools and forms a thread.
Drawing Fibers from the Preform Blank The operator threads the strand through a series of coating cups (buffer coatings) and ultraviolet light curing ovens onto a tractor- controlled spool. The tractor mechanism slowly pulls the fiber from the heated preform blank and is precisely controlled by using a laser micrometer to measure the diameter of the fiber and feed the information back to the tractor mechanism. Fibers are pulled from the blank at a rate of 33 to 66 ft/s (10 to 20 m/s) and the finished product is wound onto the spool. It is not uncommon for spools to contain more than 1.4 miles (2.2 km) of optical fiber.
Testing the Finished Optical Fiber The finished optical fiber is tested for the following: Tensile strength Refractive index profile Fiber geometry Attenuation Information carrying capacity (bandwidth) Chromatic dispersion ) Operating temperature/humidity range Temperature dependence of attenuation Ability to conduct light underwater
Optical Fiber Capacity Growth 1983- 2002 World record ~ 16 terabits per second 1,400 OC-192, 128了 1,200 1 Terabit = 1,000 OC-192, 80了 Single 800 Fiber Capacity 600 (Gigabits/sec) OC-192, 48了 400 OC-192, 32了 OC-48, 96了 OC-192, 16了 200 OC-48, 40了 565Mb 1.7 Gb OC-48 OC-192, 2了 135Mb OC-192 0 91 83 84 85 86 87 88 89 90 92 93 94 95 96 97 98 99 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19
Fiber Optic Lines in Central Philadelphia TELECOM HOTEL SOURCE: CYBERGEOGRAPHY.ORG
SOURCE: ALCATEL
Submarine Cables in North East Asia

More Related Content

Fiber optics

  • 2. Introduction You hear about fiber-optic cables whenever people talk about the telephone system, the cable TV system or the Internet. Fiber-optic lines are strands of optically pure glass as thin as a human hair that carry digital information over long distances. They are also used in medical imaging and mechanical engineering inspection.
  • 3. What are Fiber Optics? Fiber optics (optical fibers) are long, thin strands of very pure glass about the diameter of a human hair. They are arranged in bundles called optical cables and used to transmit light signals over long distances.
  • 4. What are Fiber Optics? If you look closely at a single optical fiber, you will see that it has the following parts: Core - Thin glass center of the fiber where the light travels Cladding - Outer optical material surrounding the core that reflects the light back into the core Buffer coating - Plastic coating that protects the fiber from damage and moisture
  • 5. Fiber Optics glass or plastic plastic jacket fiber core cladding TOTAL INTERNAL REFLECTION
  • 6. What are Fiber Optics?
  • 7. Fiber Optic Cables SOURCE: SURFNET.NL
  • 8. What are Fiber Optics? Single-mode fibers have small cores (about 3.5 x 10- 4 inches or 9 microns in diameter) and transmit infrared laser light (wavelength = 1,300 to 1,550 nanometers). Multi-mode fibers have larger cores (about 2.5 x 10-3 inches or 62.5 microns in diameter) and transmit infrared light (wavelength = 850 to 1,300 nm) from light-emitting diodes (LEDs). Some optical fibers can be made from plastic . These fibers have a large core (0.04 inches or 1 mm diameter) and transmit visible red light (wavelength = 650 nm) from LEDs.
  • 9. How Does an Optical Fiber Transmit Light? Suppose you want to shine a flashlight beam down a long, straight hallway. Just point the beam straight down the hallway -- light travels in straight lines, so it is no problem. What if the hallway has a bend in it? You could place a mirror at the bend to reflect the light beam around the corner. What if the hallway is very winding with multiple bends? You might line the walls with mirrors and angle the beam so that it bounces from side-to-side all along the hallway. This is exactly what happens in an optical fiber.
  • 10. How Does an Optical Fiber Transmit Light?
  • 11. How Does an Optical Fiber Transmit Light? The light in a fiber-optic cable travels through the core (hallway) by constantly bouncing from the cladding (mirror-lined walls), a principle called total internal reflection . Because the cladding does not absorb any light from the core, the light wave can travel great distances. However, some of the light signal degrades within the fiber, mostly due to impurities in the glass. The extent that the signal degrades depends on the purity of the glass and the wavelength of the transmitted light
  • 12. Dense Wave-Division Multiplexing (DWDM) 1 Multiple colors (frequencies) sent 2 through the fiber at the same time, 3 more than 100 - - - Each color carries a separate signal N Allows huge bandwidth
  • 13. Advantages of Fiber Optics Less expensive . Thinner Higher carrying capacity Less signal degradation Light signals Low power Digital signals Non-flammable Lightweight Flexible Medical imaging - in bronchoscopes, endoscopes, laparoscopes Mechanical imaging - inspecting mechanical welds in pipes and engines (in airplanes, rockets, space shuttles, cars) Plumbing - to inspect sewer lines
  • 14. How Are Optical Fibers Made? Now that we know how fiber-optic systems work and why they are useful -- how do they make them? Optical fibers are made of extremely pure optical glass . We think of a glass window as transparent, but the thicker the glass gets, the less transparent it becomes due to impurities in the glass. However, the glass in an optical fiber has far fewer impurities than window-pane glass. One company's description of the quality of glass is as follows: If you were on top of an ocean that is miles of solid core optical fiber glass, you could see the bottom clearly.
  • 15. How Are Optical Fibers Made? Making optical fibers requires the following steps: Making a preform glass cylinder Drawing the fibers from the preform Testing the fibers
  • 16. Making the Preform Blank The glass for the preform is made by a process called modified chemical vapor deposition (MCVD).
  • 17. Making the Preform Blank In MCVD, oxygen is bubbled through solutions of silicon chloride (SiCl4), germanium chloride (GeCl4) and/or other chemicals. The precise mixture governs the various physical and optical properties (index of refraction, coefficient of expansion, melting point, etc.). The gas vapors are then conducted to the inside of a synthetic silica or quartz tube (cladding) in a special lathe . As the lathe turns, a torch is moved up and down the outside of the tube.
  • 18. Making the Preform Blank The extreme heat from the torch causes two things to happen: The silicon and germanium react with oxygen, forming silicon dioxide (SiO2) and germanium dioxide (GeO2). The silicon dioxide and germanium dioxide deposit on the inside of the tube and fuse together to form glass
  • 19. Making the Preform Blank The lathe turns continuously to make an even coating and consistent blank. The purity of the glass is maintained by using corrosion- resistant plastic in the gas delivery system (valve blocks, pipes, seals) and by precisely controlling the flow and composition of the mixture. The process of making the preform blank is highly automated and takes several hours. After the preform blank cools, it is tested for quality control.
  • 20. Drawing Fibers from the Preform Blank Once the preform blank has been tested, it gets loaded into a fiber drawing tower . Diagram of a fiber drawing tower used to draw optical glass fibers from a preform blank. The blank gets lowered into a graphite furnace (3,452 to 3,992 degrees Fahrenheit or 1,900 to 2,200 degrees Celsius) and the tip gets melted until a molten glob falls down by gravity. As it drops, it cools and forms a thread.
  • 21. Drawing Fibers from the Preform Blank The operator threads the strand through a series of coating cups (buffer coatings) and ultraviolet light curing ovens onto a tractor- controlled spool. The tractor mechanism slowly pulls the fiber from the heated preform blank and is precisely controlled by using a laser micrometer to measure the diameter of the fiber and feed the information back to the tractor mechanism. Fibers are pulled from the blank at a rate of 33 to 66 ft/s (10 to 20 m/s) and the finished product is wound onto the spool. It is not uncommon for spools to contain more than 1.4 miles (2.2 km) of optical fiber.
  • 22. Testing the Finished Optical Fiber The finished optical fiber is tested for the following: Tensile strength Refractive index profile Fiber geometry Attenuation Information carrying capacity (bandwidth) Chromatic dispersion ) Operating temperature/humidity range Temperature dependence of attenuation Ability to conduct light underwater
  • 23. Optical Fiber Capacity Growth 1983- 2002 World record ~ 16 terabits per second 1,400 OC-192, 128了 1,200 1 Terabit = 1,000 OC-192, 80了 Single 800 Fiber Capacity 600 (Gigabits/sec) OC-192, 48了 400 OC-192, 32了 OC-48, 96了 OC-192, 16了 200 OC-48, 40了 565Mb 1.7 Gb OC-48 OC-192, 2了 135Mb OC-192 0 91 83 84 85 86 87 88 89 90 92 93 94 95 96 97 98 99 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19
  • 24. Fiber Optic Lines in Central Philadelphia TELECOM HOTEL SOURCE: CYBERGEOGRAPHY.ORG
  • 26. Submarine Cables in North East Asia