際際滷

際際滷Share a Scribd company logo

6A CAT-M.PDF

S
Shane Wells

The document provides an overview of the products and services offered by Apache Pressure Products, a leading distributor of oilfield equipment. It describes Apache as utilizing a network of qualified manufacturers who undergo a quality audit process. The document then summarizes Apache's extensive line of wellhead equipment including casing heads, casing spools, tubing spools, tubing heads, multibowl wellhead systems, bottom hole test adapters, tubing head adapters, and various valves. Technical specifications are provided for each type of equipment.

1 of 20
Downloaded 20 times
6A CAT-M.PDF
Table of Contents Who We Are 01 Casing Heads 02 Casing Spools 03 Tubing Spools 04 Threaded Tubing Heads 05 Multibowl Wellhead System 06 Bottom Hole Test Adapters 07 Tubing Head Adapters 08 Secondary Seals 09 Casing Hangers 10 Tubing Hangers 11 Studded Crosses and Tees 12 Gate Valves 13 Slab Gate Valves 14 Expanding Gate Valves 15 Consumables 16
Who we are Apache Pressure Products is a leading distributor of oil鍖eld and industrial equipment. Our line of API 6A wellhead equipment is made to the highest quality standards and has been 鍖eld tested time and time again. Our sales specialists will assist you on your purchase whether you are looking for just one gate valve or an entire multi-bowl system with custom design elements and modi鍖cations. Apache Pressure Products utilizes a network of quali鍖ed manufacturers, all whom must complete a quality audit process with satisfactory rating to be considered. We also conduct an annual quality inspection of each supplier to ensure that the level of quality is maintained. We leverage two decades worth of contracting manufacturing experience in the selection and quali鍖cation of our vendors. Our onsite representatives are on call and ready at any given time to inspect and monitor manufacturing and testing of our products. When the products arrive in the US they are further scrutinized for material and workmanship defects at our quality control center. We ensure that every piece of equipment meets and surpasses all speci鍖cation requirements. At our Manvel warehouse we keep an extensive stock of wellhead equipment as well as vast selections of valves and 鍖ttings for all of your drilling and production needs. Please give us a call today and see what we can o鍖er you. Our mission is to provide unsurpassed value to our customers through constant improvement and innovation.
C-22/29 Casing Heads Apache Casing heads have a straight bore bowl design with 45 landing shoulders which prevents damage to sealing areas by drilling tools and eliminates bowl protector wedging issues when pressure is applied. Ordering Options Overview Outlets Line Pipe Outlets Side Studded Outlets Lock Screws BP pins (2) are supplied upon request Bottom Connections Slip-on-weld Slip-on-weld + Oring Threaded Sure Lock API 6A specifications PSL 1, PSL 2 (on request), PR 1, DD Casing Size Top Flange Working Pressure (psi) A B C Weight (lbs) 2,000 17.25 8.00 10.88 340 3,000 17.25 8.00 10.88 460 5,000 17.50 8.00 10.88 710 2,000 17.25 9.00 10.88 320 3,000 17.25 9.00 10.88 430 5,000 17.50 9.00 10.88 680 2,000 17.25 10.00 10.88 300 3,000 17.25 10.00 10.88 410 5,000 17.50 10.00 10.88 560 2,000 17.50 11.00 13.50 469 3,000 17.50 11.00 13.50 587 5,000 17.50 11.00 13.50 - 3,000 17.50 11.00 16.62 - 5,000 18.00 11.00 16.62 - 2,000 17.50 12.56 13.50 380 3,000 17.50 12.56 13.50 500 5,000 17.50 12.56 13.50 750 3,000 17.50 12.56 16.62 - 5,000 18.00 12.56 16.62 - 2,000 17.50 15.37 16.62 980 3,000 17.50 15.37 16.62 995 5,000 18.00 15.37 16.62 - 21-1/4" 2,000 19.00 19.12 20.12 1210 20-3/4" 3,000 19.00 19.12 20.12 1331 16-3/4" 20" 13-5/8" 16-3/4" 13-3/8" 13-5/8" 16-3/4" 16" 11-3/4" 8-5/8" 11" 9-5/8" 11" 10-3/4" 11"
Apache C-22 Casing Spools have a straight bore bowl design with 45 landing shoulders. Bottom prep can be standard PE/BG, OO bottom (below 5,000 psi applications) or double P seal bottom. C-29 Casing Spools are based on the same design as the C-22 with a larger bowl. Which permits the acceptance of the C-29 Casing Hanger with larger load capacity. Ordering Options Outlets Line Pipe Outlets Side Studded Outlets API 6A specifications PSL 1, PSL 2, PR 1, DD A B C 2,000 23.12 10.00 10.88 570 3,000 23.12 10.00 10.88 600 3,000 23.12 10.00 10.88 710 5,000 26.25 10.00 10.88 - 5,000 26.25 10.00 10.88 - 10,000 31.25 10.00 10.88 - 2,000 23.12 10.00 10.88 - 3,000 23.12 10.00 10.88 740 2,000 23.12 12.50 13.50 - 3,000 23.12 12.50 13.50 - 3,000 26.25 10.00 10.88 785 5,000 26.25 10.00 10.88 1175 3,000 26.75 12.50 13.50 - 5,000 26.75 12.50 13.50 - 5,000 29.38 10.00 10.88 1595 10,000 30.25 10.00 10.88 1948 5,000 30.25 12.50 13.50 - 10,000 30.25 12.50 13.50 - 11" 10,000 30.88 10.00 10.88 2950 13-5/8" 10,000 32.62 12.50 13.50 3900 2,000 23.12 10.00 10.88 - 3,000 23.12 10.00 10.88 - 2,000 23.12 12.50 13.50 - 3,000 23.12 12.50 13.50 - 3,000 23.12 10.00 10.88 1200 5,000 24.12 10.00 10.88 1518 3,000 24.12 12.50 13.50 1725 5,000 25.00 12.50 13.50 1950 5,000 30.50 10.00 10.88 - 10,000 29.75 10.00 10.88 3235 5,000 29.75 12.50 13.50 - 10,000 30.50 12.50 13.50 3243 13-5/8" 10,000 32.62 12.50 13.50 - 16-3/4" 10,000 33.00 15.37 16.62 - 2,000 25.25 12.50 13.50 - 3,000 25.25 12.50 13.50 2063.00 2,000 25.25 15.37 16.62 - 3,000 25.25 15.37 16.62 - 3,000 25.25 12.50 13.50 1960 5,000 27.00 12.50 13.50 2450.00 20-3/4" 3,000 27.00 19.12 20.12 - 21-1/4" 5,000 29.25 19.12 20.12 - 5,000 27.00 12.50 13.50 - 10,000 29.25 12.50 13.50 - 5,000 30.75 15.37 16.62 - 10,000 32.25 15.37 16.62 - 20-3/4" 3,000 13-5/8" 21-1/4" 5,000 13-5/8" 16-3/4" 13-5/8" 10,000 21-1/4" 2,000 13-5/8" 16-3/4" 10,000 16-3/4" 2,000 11" 13-5/8" 3,000 11" 13-5/8" 5,000 11" 2,000 11" 13-5/8" 13-5/8" 11" 13-5/8" 11" 13-5/8" 3,000 5,000 Dimensions (inch) Weight (lbs) 11" 2,000 11" 3,000 11" 5,000 11" Bottom Flange (wp in psi) Top Flange (wp in psi) Overview Casing Spool Lock Screws BP pins (2) are supplied upon request Bottom Prep PE/BG Bottom OO Bottom Dobule P Seal Bottom
Tubing Spools Outlets Line Pipe Outlets Side Studded Outlets Lock Screws BP pins are included Bottom Prep PE/BG bottom HPE bottom API 6A specifications PSL 1 or PSL 2, PR 1, DD-NL Apache Tubing Spools have a straight bore bowl design with 45 landing shoulders which prevents damage to sealing areas by drilling tools and eliminates bowl protector wedging issues when pressure is applied. Accepts all TC style tubing hangers, can be converted from single to multiple completions. Overview Ordering Options A B C 2,000 7-1/16 3,000 23.12 6.76 7.00 550 3,000 23.12 6.76 7.00 600 5,000 26.25 6.76 7.00 670 3,000 26.25 8.25 8.75 750 5,000 26.25 8.25 8.75 800 5,000 26.25 6.76 7.00 880 10,000 31.25 6.76 7.00 856 9 10,000 31.25 8.25 8.75 1249 10,000 32.62 6.76 7.00 1318 15,000 33.25 6.76 7.00 - 9 10,000 32.62 8.25 8.75 1700 7-1/16 3,000 23.12 6.76 7.00 445 9 3,000 23.12 8.25 8.75 655 3,000 26.25 6.76 7.00 670 5,000 26.25 6.76 7.00 805 3,000 26.25 8.25 8.75 705 5,000 26.75 8.25 8.75 715 5,000 11 10,000 30.25 10.00 10.88 1754 10,000 7-1/16 13-5/8" 2,000 3,000 7-1/16 9 Bottom Flange (wp in psi) Top Flange (wp in psi) Dimensions (inch) Weight (lbs) 11" 3,000 7-1/16 9 5,000 7-1/16
Apache Threaded Tubing Heads has a TCM top and threaded bottom connection. All Tubing Heads are supplied with 4 BP Lock pins and comes with 2 LP outlets. Tubing Heads are supplied up to 5,000 psi. Overview A B C 3,000 4 1/2" 8rd 2 X 2" LP 14.000 7.000 7.126 103 3,000 5 1/2" 8rd 2 X 2" LP 14.000 7.000 7.126 101 5,000 4 1/2" 8rd 2 X 2" LP 15.945 7.000 7.126 108 5,000 5 1/2" 8rd 2 X 2" LP 15.945 7.000 7.126 104 Wt (lbs) 7 1/16" Bottom Outlet Dimensions (inches) Flange (w orking pressure in psi) Threaded Tubing Heads
Multibowl Wellhead System The multi-bowl system allows the support of multiple casing strings therefore reducing installation time. Our multi-bowl well head system is con鍖gurable according to your speci鍖cations. Apache's multi-bowl system can signi鍖cantly reduce your operational cost and improve safety at the same time. Overview Casing Spool Straightbore design casing spool incorporates two sets of ET style lockpins. Supplied with two Side-Studded Outlets Packoff Support Bushing Pack-o鍖 support busing lands on the mandrel hanger and suspend the intermediate casing string. Casing Hanger Multi-bowl system utilizes a 鍖uted mandrel casing hanger to allow cement returns. Tubing Hanger Mulit-bowl system uses traditional TCM Tubing Hangers. Tubing hanger lands on the packo鍖 support bushing. Lockdown pins from the upper casing spool locks the tubing hangers in place. Casing Head Apache Multibowl casing head uses a straight-bore desgin with 45 landing shoulders. Casing heads are supplied with eight lockpins to support the packo鍖 bushing. o
Flange Size Bore A B C Lift Thread Wt (lbs) 2-1/16" 5,000 psi 2 1/16" 7.79" 8.46" 2.07" 2 3/8" EUE 52 2-9/16" 5,000 psi 2 9/16" 7.79" 9.65" 2.56" 2 7/8" EUE 60 Overview Bottom hole test adapters or Treecaps allow a 鍖exible means of entry into the tubing bore. Apache tree caps are constructed with one piece forging and is designed to use where a integral 鍖anged unit is preferred. Bottom Hole Test Adapters
Overview Apache Pressure Products o鍖ers a wide selection of tubing head adapters for transition from the wellhead to the tree. Adapters are designed for mulitiple types of heads and hangers. Comes in threaded, 鍖anged or studded connections. B1 Theaded Adapters Flanged adapter with male externally threaded top connection and female bottom internally threaded both with 8rd EUE threads. B2P Adapters Flanged adapter with studded top and 8rd EUE threaded bottoms. A5P Adapters Flanged adapter with studded top and bottom pocket of 2 or 2.5. Available with 1/2 NPT test port. Tubing Head Adapters Flange Size Threaded Top Bottom Thread Wt. (lbs) 7-1/16" 2,000 2-3/8" UPTBG 2-3/8" UPTBG 117 7-1/16" 2,000 2-7/8" UPTBG 2-7/8" UPTBG 110 7-1/16" 3,000 2-3/8" UPTBG 2-3/8" UPTBG 142 7-1/16" 3,000 2-7/8" UPTBG 2-7/8" UPTBG 135 7-1/16" 3,000 3-1/2" UPTBG 3-1/2" UPTBG 145 7-1/16" 5,000 2-3/8" UPTBG 2-3/8" UPTBG 210 7-1/16" 5,000 2-7/8" UPTBG 2-7/8" UPTBG 195 7-1/16" 5,000 3-1/2" UPTBG 3-1/2" UPTBG 175 Flange Size Studded Top Bottom Thread Wt. (lbs) 7-1/16" 2,000 2-1/16" 2,000 2-3/8" UPTBG 107 7-1/16" 3,000 2-1/16" 5,000 2-3/8" UPTBG 114 7-1/16" 3,000 2-9/16" 5,000 2-7/8" UPTBG 170 7-1/16" 3,000 3-1/8" 5,000 3-1/2" UPTBG 225 7-1/16" 5,000 2-1/16" 5,000 2-3/8" UPTBG 160 7-1/16" 5,000 2-9/16" 5,000 2-7/8" UPTBG 230 7-1/16" 5,000 3-1/8" 5,000 3-1/2" UPTBG 330 Flange Size Studded Top Bottom Pocket Wt. (lbs) 7-1/16" 3,000 2-1/16" 5,000 2" 124 7-1/16" 3,000 2-9/16" 5,000 2-1/2" 117 7-1/16" 5,000 2-1/16" 5,000 2" 178 7-1/16" 5,000 2-9/16" 5,000 2-1/2" 175 7-1/16" 10,000 2-1/16" 10,000 2" 318 7-1/16" 10,000 2-9/16" 10,000 2-1/2" 316
Secondary Seals Overview Secondary seals are inserted in the bottom of a casing or tubing spool. It is used to seal around the production casing. Apache Pressure Products carries PE and HPE secondary seals. PE Seals PE seal is inserted in the bottom of a casing or tubing spool and retained with a snap wire. The seal is energized when the spool is installed over the casing stub and the 鍖anged connection is made up. HPE Seals HPE seal is inserted into a HPE bottom preparation of most 10,000- 15,000 psi casing or tubing spools. The bottom plate is threaded into the bottom prep and is designed for high pressure applications 7" 9" 10-3/4" 4-1/2" 5,000 psi-15,000 psi 5,000 psi-15,000 psi 5" 5,000 psi-15,000 psi 5,000 psi-15,000 psi 5-1/2" 5,000 psi-15,000 psi 5,000 psi-15,000 psi 6-5/8" 5,000 psi-15,000 psi 7" 5,000 psi-15,000 psi 7-5/8" 5,000 psi-15,000 psi 8-5/8" 5,000 psi-15,000 psi 9-5/8" 5,000 psi-15,000 psi Casing Size SpoolNominalBottom Prep
C-22/29 Apache C-22 wrap around casing hangers incorporates pack o鍖, slip bowl and slips. Packo鍖 seals the annulus below the slips when casing load is applied. The C-22 Hangers controlled fricition reduces casing de鍖ection. C-22 casing hangers are easy to install and economical. Nominal Bowl Size Casing Size 4-1/2" 5" 5-1/2" 7" 7-5/8" 5-1/2" 7" 7-5/8" 8-5/8" 9-5/8" 9-5/8" 10-3/4" 11-7/8" 13-3/8" 16" 11" 13-5/8" 16-3/4" 20" Overview Apache Pressure Products o鍖ers a wide selection of Casing Hangers. Casing Hanger lands inside the casing head and is responsible for hanging the casing string. We supply both slip and mandrel style casing hangers. Casing Hangers
TC1W Tubing Hanger TC1W Wrap around hanger is designed to seal o鍖 the casing annulus at the same time supporting the tubing string and nippling up the christmas tree without the BOP. TC1A Tubing Hanger TC1A is a threaded tubing hanger. The hanger is energized by the weight of the tubing and tightening the lock screws in the tubing head 鍖ange. TC1A-EN Tubing Hanger TC1A-EN is an extended neck TC1A hanger with packing rings that con鍖ne all of the well pressure and 鍖uids to the tubing bore. TC1A-EN hangers can be modi鍖ed to include connections and ports for the hydraulic ontrol line in the event of hydraulically controlled down-hole safety valve installation. Size Wt (lbs) 7 1/16" X 2 3/8" O.D. 70 7 1/16" X 2 7/8" O.D. 70 Size Wt (lbs) 7 1/16" X 2 3/8" O.D. 68 7 1/16" X 2 7/8" O.D. 68 Size Wt (lbs) 7 1/16" X 2 3/8" O.D. 77 7 1/16" X 2 7/8" O.D. 70 Overview Apache Pressure Products o鍖ers a wide selection of tubing hangers. Tubing hangers suspends the production tubing and provide seal o鍖 of the casing annulus.
Studded Crosses and Tees Overview Apache Pressure Products o鍖ers a wide selection of crosses and tees in di鍖erent sizes and pressures. A, inch B, inch C, inch D, inch TEE Cross 2-1/16"2,000 2-1/16"2,000 3.50 3.50 2.06 2.06 95 85 2-1/16"5,000 2-1/16"5,000 4.50 4.50 2.06 2.06 160 161 2-9/16"2,000 2-9/16"2,000 4.50 4.50 2.56 2.56 125 119 2-9/16"5,000 2-1/16"5,000 4.50 5.00 2.56 2.06 375 255 2-9/16"5,000 2-9/16"5,000 5.00 5.00 2.56 2.56 350 225 3-1/8"2,000 3-1/8"2,000 4.50 4.50 3.12 3.12 198 185 3-1/8"3,000 2-1/16"5,000 4.50 5.00 3.12 2.06 264 231 3-1/8"3,000 2-9/16"5,000 5.00 5.00 3.12 2.56 350 275 3-1/8"3,000 3-1/8"3,000 5.00 5.00 3.12 3.12 264 271 3-1/8"5,000 2-1/16"5,000 4.50 5.50 3.12 2.06 264 295 3-1/8"5,000 2-9/16"5,000 5.50 5.50 3.12 2.56 364 310 3-1/8"5,000 3-1/8"5,000 5.50 5.50 3.12 3.12 414 321 4-1/16"2,000 4-1/16"2,000 5.50 5.50 4.06 4.06 405 354 4-1/16"3,000 3-1/8"3,000 5.00 6.12 4.06 3.12 451 435 4-1/16"3,000 4-1/16"3,000 6.12 6.12 4.06 4.06 495 451 4-1/16"5,000 2-9/16"5,000 5.00 6.50 4.06 2.56 447 425 4-1/16"5,000 3-1/8"5,000 5.50 6.50 4.06 3.12 488 425 4-1/16"5,000 4-1/16"5,000 6.50 6.50 4.06 2.56 565 486 1-13/16"10,000 1-13/16"10,000 4.38 4.38 1.81 1.81 191 187 1-13/16"15,000 1-13/16"15,000 5.00 5.00 1.81 1.81 257 253 2-1/16"10,000 1-13/16"10,000 4.38 4.38 2.06 1.81 191 187 2-1/16"10,000 2-1/16"10,000 4.38 4.38 2.06 2.06 191 187 2-1/16"15,000 1-13/16"15,000 5.00 5.00 2.06 1.81 257 253 2-1/16"15,000 1-13/16"10,000 5.00 5.00 2.06 2.06 257 253 2-9/16"10,000 2-1/16"10,000 4.50 5.12 2.56 1.81 246 241 2-9/16"10,000 1-13/16"15,000 4.50 5.12 2.56 2.06 246 241 2-9/16"10,000 2-9/16"10,000 5.12 5.12 2.56 2.56 286 280 2-9/16"15,000 1-13/16"15,000 5.50 5.50 2.56 1.81 386 307 2-9/16"15,000 2-1/16"15,000 5.50 5.50 2.56 2.06 389 350 2-9/16"15,000 2-9/16"15,000 5.50 5.50 2.56 2.56 375 335 3-1/16"10,000 1-13/16"10,000 4.50 5.88 3.06 1.81 370 350 3-1/16"10,000 3-1/16"10,000 4.50 5.88 3.06 2.06 370 350 3-1/16"10,000 2-9/16"10,000 5.12 5.88 3.06 2.56 407 433 3-1/16"10,000 3-1/16"10,000 5.88 5.88 3.06 3.06 480 464 3-1/16"15,000 1-13/16"15,000 6.31 6.31 3.06 1.81 486 470 3-1/16"15,000 2-1/16"15,000 6.31 6.31 3.06 2.06 470 440 3-1/16"15,000 2-9/16"15,000 6.31 6.31 3.06 2.56 440 432 3-1/16"15,000 3-1/16"15,000 6.31 6.31 3.06 3.06 430 422 Run Outlets Dimensions Wt. (lbs)
Body Bonnet Stem Gate Seat Stem Seal Seat Seal Bonnet Seal API CLASS AA General Non-corrosive Alloy Steel Forging or casting Alloy Steel Forging Alloy Nitrided Alloy Nitrided Alloy Nitrided Te鍖on FKM Graphite PEEK Viton 304or 316SS API CLASS BB General Slightly Corrosive Alloy Steel Forging or casting Alloy Steel Forging A564 Type. 630 (17-4PH) 410 SS Nitrided 410 SS Nitrided Te鍖on FKM Graphite PEEK Viton 304or 316SS API CLASS CC General Moderately Corrosive, CO2 410 Stainless Steel 410 Stainless Steel A564 Type. 630 (17-4PH) 410 SS Nitrided 410 SS Nitrided Te鍖on FKM Graphite PEEK Viton 304or 316SS API CLASS DD-NL Sour Non-corrosive Alloy Steel Forging or casting Alloy Steel Forging Alloy Nitrided Alloy Nitrided Alloy Nitrided Te鍖on FKM Graphite PEEK Viton 304or 316SS API CLASS EE-0,5 Sour Slightly Corrosive Alloy Steel Forging or casting Alloy Steel Forging A564 Type. 630 (17-4PH) 410 SS Nitrided 410 SS Nitrided Te鍖on FKM Graphite PEEK Viton 304or 316SS API CLASS EE-1,5 Sour Moderately Corrosive CO2 Alloy Steel Forging or casting Alloy Steel Forging Inconel 718 410 SS w/Hard facing 410 SS Nitrided Te鍖on FKM Graphite PEEK Viton 304or 316SS API CLASS EE-NL Sour Moderately Corrosive CO2 Alloy Steel Forging or casting Alloy Steel Forging Inconel 718 410 SS w/Hard facing 410 SS Nitrided Te鍖on FKM Graphite PEEK Viton 304or 316SS API CLASS FF-0,5 Sour, Moderately Corrosive, H2S 410 Stainless Steel 410 Stainless Steel A564 Type. 630 (17-4PH) 410 SS Nitrided 410 SS Nitrided Te鍖on FKM Graphite PEEK Viton 304or 316SS API CLASS FF-1,5 Sour Highly Corrosive H2S and CO2 410 Stainless Steel 410 Stainless Steel Inconel 718 410 SS w/Hard facing 410 SS Nitrided Te鍖on FKM Graphite PEEK Viton 304or 316SS API CLASS FF-NL Sour Highly Corrosive H2S and CO2 410 Stainless Steel 410 Stainless Steel Inconel 718 410 SS w/Hard facing 410 SS Nitrided Te鍖on FKM Graphite PEEK Viton 304or 316SS API CLASS HH High Corrosion Alloy Steel w/625 Claded Alloy Steel w/625 Claded Inconel 718 Inconel 718/625 w/Hard facing Inconel 718/625 w/Hard facing Te鍖on FKM Graphite PEEK Viton Inconel 718 Service Condition Body Description Material specification for API 6A Gate Valves
The Apache slab gate is a high performance, bi- directional slab gate valve is ideal for high pressure, critical service applications from 3,000 psi through 20,000 psi. Apache slab gate valve utilitizes a forged body and bonnect with alloy steel and at the minimum meets API PSL 2 requirements. Apache slab gate valves comes in variety of trim and product service levels, please consult trim chart or specify well conditions at time of inquiry for the best trim and PSL level for your application. Also available in ball screw or hydraulic operation at higher pressure ratings. Overview Slab Gate Valves Size D (inch) E (inch) Wt (lbs) 1-13/16" 14.8 17 243 2-1/16" 15.5 17 329 2-9/16" 16.5 17 410 3-1/16" 17.4 18.75 518 4-1/16" 19.1 18.75 1118 5-1/8" 24.4 25 1528 3.06 24.38 7.9 BX-154 4.06 26.38 9.8 BX-155 5.12 29 12.7 BX-169 1.81 18.25 5.6 BX-151 2.06 20.5 6.1 BX-152 2.56 22.25 6.8 BX-153 A (Bore, inch) B (inch) C (inch) API Ring Size C (inch) E(inch) Wt (lbs) 1-13/16" 5.9 17 260 2-1/16" 6.5 17 315 2-9/16" 7.7 18.75 576 3-1/16" 9 18.75 602 2.56 21 16.5 BX-153 3.06 23.56 17.4 BX-154 A(Bore, inch) B (inch) D (inch) API Ring 1.81 18 14.8 BX-151 2.06 19 15.5 BX-152 B (inch) D (inch) API Ring 14.62 15.5 R-24 16.62 16.5 R-27 18.62 17.4 R-35 21.62 19.1 R-39 28.62 24.4 R-44 29 27.1 R-46 29 27.3 R-46 32 27.6 R-467-1/16" 7.06 15.3 25 2187 7-1/16"x 6" 6 14.8 25 2106 7-1/16"x 6-3/8" 6.38 15 25 2132 4-1/16" 4.06 8.3 17 688 5-1/8" 5.12 11 18.75 1387 2-9/16" 2.56 5.9 13.5 289 3-1/8" 3.12 6.7 17 419 Size A(Bore, inch) C (inch) E(inch) Wt (lbs) 2-1/16" 2.06 5.1 13.5 216 Flanged 10,000 psi working Pressure Flanged 15,000 psi working Pressure Flanged 5,000 psi working Pressure
The Apache expanding gate valve is a bi-directional, with a preferred sealing side valve. For wellhead, production trees, and manifold applications with working pressure rated up to 5,000 psi. Supplied in 鍖anged or threaded connections. Apache expanding gate valves utilizes a wedge gate design for easy manual operation and parts are usually compatible with most major manufacturer and distributors for easy repair and maintenance. Apache expanding gate valves comes in variety of trim and product service levels, please consult trim chart or specify well conditions at time of inquiry for the best trim and PSL level for your application. Size A (Bore,inch) B (inch) C (inch) D (inch) E (inch) # of Turns Wt (lbs) 2-1/16" 2.06 9.62 5.3 19.6 13 13 126 2-9/16" 2.56 10.25 6.1 20.6 13 15-1/2 142 3-1/8" 3.12 11.38 7.6 22.8 16 20 236 4-1/16" 4.06 13 9.4 25.9 16 24-1/2 454 Threaded Size A (Bore, inch) B (inch) C(inch) D(inch) E(inch) # of Turns Wt (lbs) 2-1/16" 2.06 14.62 5.3 19.6 13 13 176 2-9/16" 2.56 16.62 6.1 20.6 13 15-1/2 224 3-1/8" 3.12 18.62 7.6 22.8 16 20 334 4-1/16" 4.06 21.62 9.4 25.9 16 24-1/2 614 Flanged Overview Expanding Gate Valves
Ring Joint Gaskets Apache carries a wide selection of Ring Joint Gaskets in low carbon steel or stainless 316. R-Type Octagonal gaskets designed for 鍖anges up to 5,000 psi RX-Type Interchangeable with R-type gaskets RX-type gaskets are pressure-energized for improved sealing e鍖ciency BX-Type High pressure gaskets for working pressures up to 20,000 psi. Designed with pressure balance hole to equalize potential trapped gases within the grooves. B7 Stud and nuts B7 bolts are available in either two nuts per stud, tap end or combo styles. Standard B7 are black 鍖nish. Special tap end thread con鍖guration, 鍖nish or length requirements are available upon request. Needle Valves Apache o鍖ers a full line of needle valves in carbon steel AISI 1040 or Stainless 316. Various body style and seat selection ensures the right valve for your application. Available in 6,000 psi and 10,000 psi. Oilfield Ball Valves Carbon by Stainless threaded ball valves with pressure rating up to 5,000 psi. Available from 1 to 3 in both reduced and full port. All oil鍖eld ball valves are equipment with a grease 鍖tting. Also available in bolted pattern body style. Consumables
1. PRICING - Products and services provided will be invoiced at the price shown and agreed upon at the time of service, invoice, or, as printed on any and/or all Apache Pressure Products sales/information material including purchase orders, letters, or emails. Printed prices do not include freight or any applicable taxes. Taxes and other fees such as shipping will be quoted and or billed as per order, or as required. 2. TREMS OF PAYMENT Payment is due upon receipt or as agreed to by contract. Any unpaid past due balance will accrue interest and penalties at the rate of 12% APR, or the max allowed by state law, for the period that the past due balance remains unpaid, and shall not be less than twenty dollars ($20.00). Further customers agree to pay all attorney and/or collection fees and waives notice of such should subsequent litigation become required to effect collection or to assert our interest for unpaid balances. 3. QUOTATIONS - All quotations and sales are F.O.B. our plant in Manvel, Texas. Net prices and discounts are subject to change without notice. Prices in effect at the time of receipt of order whether higher or lower, will prevail. All sales tax, use tax, or other excise taxes which may be required by law to be paid in connection with any sale will be added to the gross sales price. 4. DELIVERY/FREIGHT - All shipments are F.O.B. Manvel, Texas unless otherwise stated. All promises of shipments are as closely estimated as possible. We will make every effort to ship within the time promised, but do not guarantee to do so, or assume further or implied liability with respect to delivery dates or timelines. Our responsibility ceases upon delivery to any common carrier or other agent furnished or specified by the customer and we do not, unless previously instructed, insure shipments beyond the point of delivery to such carriers. Full freight allowance will be covered on individual orders of $3000.00-$5000.00 based upon the state to which the shipment will be delivered to. The Freight carrier will be chosen by the seller unless otherwise instructed or agreed upon in advance by both parties. Individual orders that do not meet the required amount will not receive freight allowance. 5. SHORTAGES AND DAMAGES IN TRANSIT - All claims for shortages or damaged products must be made within five days after receipt of shipment. All lost or damaged materials in transit become the responsibility. 6. WARRANTY - This warranty is in lieu of all other warranties, expressed or implied, including any implied warranty or merchantability or fitness for any use or purpose. All of Apache Pressure Products INC. products are warranted to be free from manufacturing defects and workmanship for a period of one (1) year from the date of shipment, and if found to be defective within that period the product will be replaced at no charge to the customer. However, the product being returned must have been used in accordance with the intended or published purpose, and approved installation and operating practices. There must be a properly filled out return authorization (RA) before credit or replacement will be offered. 7. CANCELLATIONS/CHANGES - Cancellations or instructions to change work or delivery must be submitted in writing to the seller. If any order is canceled the buyer will be responsible for the payment of work already performed and any material already in use.
APACHE PRESSURE PRODUCTS 3909 BAILEY AVE MANVEL, TX 77578 (713) 941-1669 (713) 941-2660 WWW.APACHEMFG.COM

More Related Content

6A CAT-M.PDF

  • 2. Table of Contents Who We Are 01 Casing Heads 02 Casing Spools 03 Tubing Spools 04 Threaded Tubing Heads 05 Multibowl Wellhead System 06 Bottom Hole Test Adapters 07 Tubing Head Adapters 08 Secondary Seals 09 Casing Hangers 10 Tubing Hangers 11 Studded Crosses and Tees 12 Gate Valves 13 Slab Gate Valves 14 Expanding Gate Valves 15 Consumables 16
  • 3. Who we are Apache Pressure Products is a leading distributor of oil鍖eld and industrial equipment. Our line of API 6A wellhead equipment is made to the highest quality standards and has been 鍖eld tested time and time again. Our sales specialists will assist you on your purchase whether you are looking for just one gate valve or an entire multi-bowl system with custom design elements and modi鍖cations. Apache Pressure Products utilizes a network of quali鍖ed manufacturers, all whom must complete a quality audit process with satisfactory rating to be considered. We also conduct an annual quality inspection of each supplier to ensure that the level of quality is maintained. We leverage two decades worth of contracting manufacturing experience in the selection and quali鍖cation of our vendors. Our onsite representatives are on call and ready at any given time to inspect and monitor manufacturing and testing of our products. When the products arrive in the US they are further scrutinized for material and workmanship defects at our quality control center. We ensure that every piece of equipment meets and surpasses all speci鍖cation requirements. At our Manvel warehouse we keep an extensive stock of wellhead equipment as well as vast selections of valves and 鍖ttings for all of your drilling and production needs. Please give us a call today and see what we can o鍖er you. Our mission is to provide unsurpassed value to our customers through constant improvement and innovation.
  • 4. C-22/29 Casing Heads Apache Casing heads have a straight bore bowl design with 45 landing shoulders which prevents damage to sealing areas by drilling tools and eliminates bowl protector wedging issues when pressure is applied. Ordering Options Overview Outlets Line Pipe Outlets Side Studded Outlets Lock Screws BP pins (2) are supplied upon request Bottom Connections Slip-on-weld Slip-on-weld + Oring Threaded Sure Lock API 6A specifications PSL 1, PSL 2 (on request), PR 1, DD Casing Size Top Flange Working Pressure (psi) A B C Weight (lbs) 2,000 17.25 8.00 10.88 340 3,000 17.25 8.00 10.88 460 5,000 17.50 8.00 10.88 710 2,000 17.25 9.00 10.88 320 3,000 17.25 9.00 10.88 430 5,000 17.50 9.00 10.88 680 2,000 17.25 10.00 10.88 300 3,000 17.25 10.00 10.88 410 5,000 17.50 10.00 10.88 560 2,000 17.50 11.00 13.50 469 3,000 17.50 11.00 13.50 587 5,000 17.50 11.00 13.50 - 3,000 17.50 11.00 16.62 - 5,000 18.00 11.00 16.62 - 2,000 17.50 12.56 13.50 380 3,000 17.50 12.56 13.50 500 5,000 17.50 12.56 13.50 750 3,000 17.50 12.56 16.62 - 5,000 18.00 12.56 16.62 - 2,000 17.50 15.37 16.62 980 3,000 17.50 15.37 16.62 995 5,000 18.00 15.37 16.62 - 21-1/4" 2,000 19.00 19.12 20.12 1210 20-3/4" 3,000 19.00 19.12 20.12 1331 16-3/4" 20" 13-5/8" 16-3/4" 13-3/8" 13-5/8" 16-3/4" 16" 11-3/4" 8-5/8" 11" 9-5/8" 11" 10-3/4" 11"
  • 5. Apache C-22 Casing Spools have a straight bore bowl design with 45 landing shoulders. Bottom prep can be standard PE/BG, OO bottom (below 5,000 psi applications) or double P seal bottom. C-29 Casing Spools are based on the same design as the C-22 with a larger bowl. Which permits the acceptance of the C-29 Casing Hanger with larger load capacity. Ordering Options Outlets Line Pipe Outlets Side Studded Outlets API 6A specifications PSL 1, PSL 2, PR 1, DD A B C 2,000 23.12 10.00 10.88 570 3,000 23.12 10.00 10.88 600 3,000 23.12 10.00 10.88 710 5,000 26.25 10.00 10.88 - 5,000 26.25 10.00 10.88 - 10,000 31.25 10.00 10.88 - 2,000 23.12 10.00 10.88 - 3,000 23.12 10.00 10.88 740 2,000 23.12 12.50 13.50 - 3,000 23.12 12.50 13.50 - 3,000 26.25 10.00 10.88 785 5,000 26.25 10.00 10.88 1175 3,000 26.75 12.50 13.50 - 5,000 26.75 12.50 13.50 - 5,000 29.38 10.00 10.88 1595 10,000 30.25 10.00 10.88 1948 5,000 30.25 12.50 13.50 - 10,000 30.25 12.50 13.50 - 11" 10,000 30.88 10.00 10.88 2950 13-5/8" 10,000 32.62 12.50 13.50 3900 2,000 23.12 10.00 10.88 - 3,000 23.12 10.00 10.88 - 2,000 23.12 12.50 13.50 - 3,000 23.12 12.50 13.50 - 3,000 23.12 10.00 10.88 1200 5,000 24.12 10.00 10.88 1518 3,000 24.12 12.50 13.50 1725 5,000 25.00 12.50 13.50 1950 5,000 30.50 10.00 10.88 - 10,000 29.75 10.00 10.88 3235 5,000 29.75 12.50 13.50 - 10,000 30.50 12.50 13.50 3243 13-5/8" 10,000 32.62 12.50 13.50 - 16-3/4" 10,000 33.00 15.37 16.62 - 2,000 25.25 12.50 13.50 - 3,000 25.25 12.50 13.50 2063.00 2,000 25.25 15.37 16.62 - 3,000 25.25 15.37 16.62 - 3,000 25.25 12.50 13.50 1960 5,000 27.00 12.50 13.50 2450.00 20-3/4" 3,000 27.00 19.12 20.12 - 21-1/4" 5,000 29.25 19.12 20.12 - 5,000 27.00 12.50 13.50 - 10,000 29.25 12.50 13.50 - 5,000 30.75 15.37 16.62 - 10,000 32.25 15.37 16.62 - 20-3/4" 3,000 13-5/8" 21-1/4" 5,000 13-5/8" 16-3/4" 13-5/8" 10,000 21-1/4" 2,000 13-5/8" 16-3/4" 10,000 16-3/4" 2,000 11" 13-5/8" 3,000 11" 13-5/8" 5,000 11" 2,000 11" 13-5/8" 13-5/8" 11" 13-5/8" 11" 13-5/8" 3,000 5,000 Dimensions (inch) Weight (lbs) 11" 2,000 11" 3,000 11" 5,000 11" Bottom Flange (wp in psi) Top Flange (wp in psi) Overview Casing Spool Lock Screws BP pins (2) are supplied upon request Bottom Prep PE/BG Bottom OO Bottom Dobule P Seal Bottom
  • 6. Tubing Spools Outlets Line Pipe Outlets Side Studded Outlets Lock Screws BP pins are included Bottom Prep PE/BG bottom HPE bottom API 6A specifications PSL 1 or PSL 2, PR 1, DD-NL Apache Tubing Spools have a straight bore bowl design with 45 landing shoulders which prevents damage to sealing areas by drilling tools and eliminates bowl protector wedging issues when pressure is applied. Accepts all TC style tubing hangers, can be converted from single to multiple completions. Overview Ordering Options A B C 2,000 7-1/16 3,000 23.12 6.76 7.00 550 3,000 23.12 6.76 7.00 600 5,000 26.25 6.76 7.00 670 3,000 26.25 8.25 8.75 750 5,000 26.25 8.25 8.75 800 5,000 26.25 6.76 7.00 880 10,000 31.25 6.76 7.00 856 9 10,000 31.25 8.25 8.75 1249 10,000 32.62 6.76 7.00 1318 15,000 33.25 6.76 7.00 - 9 10,000 32.62 8.25 8.75 1700 7-1/16 3,000 23.12 6.76 7.00 445 9 3,000 23.12 8.25 8.75 655 3,000 26.25 6.76 7.00 670 5,000 26.25 6.76 7.00 805 3,000 26.25 8.25 8.75 705 5,000 26.75 8.25 8.75 715 5,000 11 10,000 30.25 10.00 10.88 1754 10,000 7-1/16 13-5/8" 2,000 3,000 7-1/16 9 Bottom Flange (wp in psi) Top Flange (wp in psi) Dimensions (inch) Weight (lbs) 11" 3,000 7-1/16 9 5,000 7-1/16
  • 7. Apache Threaded Tubing Heads has a TCM top and threaded bottom connection. All Tubing Heads are supplied with 4 BP Lock pins and comes with 2 LP outlets. Tubing Heads are supplied up to 5,000 psi. Overview A B C 3,000 4 1/2" 8rd 2 X 2" LP 14.000 7.000 7.126 103 3,000 5 1/2" 8rd 2 X 2" LP 14.000 7.000 7.126 101 5,000 4 1/2" 8rd 2 X 2" LP 15.945 7.000 7.126 108 5,000 5 1/2" 8rd 2 X 2" LP 15.945 7.000 7.126 104 Wt (lbs) 7 1/16" Bottom Outlet Dimensions (inches) Flange (w orking pressure in psi) Threaded Tubing Heads
  • 8. Multibowl Wellhead System The multi-bowl system allows the support of multiple casing strings therefore reducing installation time. Our multi-bowl well head system is con鍖gurable according to your speci鍖cations. Apache's multi-bowl system can signi鍖cantly reduce your operational cost and improve safety at the same time. Overview Casing Spool Straightbore design casing spool incorporates two sets of ET style lockpins. Supplied with two Side-Studded Outlets Packoff Support Bushing Pack-o鍖 support busing lands on the mandrel hanger and suspend the intermediate casing string. Casing Hanger Multi-bowl system utilizes a 鍖uted mandrel casing hanger to allow cement returns. Tubing Hanger Mulit-bowl system uses traditional TCM Tubing Hangers. Tubing hanger lands on the packo鍖 support bushing. Lockdown pins from the upper casing spool locks the tubing hangers in place. Casing Head Apache Multibowl casing head uses a straight-bore desgin with 45 landing shoulders. Casing heads are supplied with eight lockpins to support the packo鍖 bushing. o
  • 9. Flange Size Bore A B C Lift Thread Wt (lbs) 2-1/16" 5,000 psi 2 1/16" 7.79" 8.46" 2.07" 2 3/8" EUE 52 2-9/16" 5,000 psi 2 9/16" 7.79" 9.65" 2.56" 2 7/8" EUE 60 Overview Bottom hole test adapters or Treecaps allow a 鍖exible means of entry into the tubing bore. Apache tree caps are constructed with one piece forging and is designed to use where a integral 鍖anged unit is preferred. Bottom Hole Test Adapters
  • 10. Overview Apache Pressure Products o鍖ers a wide selection of tubing head adapters for transition from the wellhead to the tree. Adapters are designed for mulitiple types of heads and hangers. Comes in threaded, 鍖anged or studded connections. B1 Theaded Adapters Flanged adapter with male externally threaded top connection and female bottom internally threaded both with 8rd EUE threads. B2P Adapters Flanged adapter with studded top and 8rd EUE threaded bottoms. A5P Adapters Flanged adapter with studded top and bottom pocket of 2 or 2.5. Available with 1/2 NPT test port. Tubing Head Adapters Flange Size Threaded Top Bottom Thread Wt. (lbs) 7-1/16" 2,000 2-3/8" UPTBG 2-3/8" UPTBG 117 7-1/16" 2,000 2-7/8" UPTBG 2-7/8" UPTBG 110 7-1/16" 3,000 2-3/8" UPTBG 2-3/8" UPTBG 142 7-1/16" 3,000 2-7/8" UPTBG 2-7/8" UPTBG 135 7-1/16" 3,000 3-1/2" UPTBG 3-1/2" UPTBG 145 7-1/16" 5,000 2-3/8" UPTBG 2-3/8" UPTBG 210 7-1/16" 5,000 2-7/8" UPTBG 2-7/8" UPTBG 195 7-1/16" 5,000 3-1/2" UPTBG 3-1/2" UPTBG 175 Flange Size Studded Top Bottom Thread Wt. (lbs) 7-1/16" 2,000 2-1/16" 2,000 2-3/8" UPTBG 107 7-1/16" 3,000 2-1/16" 5,000 2-3/8" UPTBG 114 7-1/16" 3,000 2-9/16" 5,000 2-7/8" UPTBG 170 7-1/16" 3,000 3-1/8" 5,000 3-1/2" UPTBG 225 7-1/16" 5,000 2-1/16" 5,000 2-3/8" UPTBG 160 7-1/16" 5,000 2-9/16" 5,000 2-7/8" UPTBG 230 7-1/16" 5,000 3-1/8" 5,000 3-1/2" UPTBG 330 Flange Size Studded Top Bottom Pocket Wt. (lbs) 7-1/16" 3,000 2-1/16" 5,000 2" 124 7-1/16" 3,000 2-9/16" 5,000 2-1/2" 117 7-1/16" 5,000 2-1/16" 5,000 2" 178 7-1/16" 5,000 2-9/16" 5,000 2-1/2" 175 7-1/16" 10,000 2-1/16" 10,000 2" 318 7-1/16" 10,000 2-9/16" 10,000 2-1/2" 316
  • 11. Secondary Seals Overview Secondary seals are inserted in the bottom of a casing or tubing spool. It is used to seal around the production casing. Apache Pressure Products carries PE and HPE secondary seals. PE Seals PE seal is inserted in the bottom of a casing or tubing spool and retained with a snap wire. The seal is energized when the spool is installed over the casing stub and the 鍖anged connection is made up. HPE Seals HPE seal is inserted into a HPE bottom preparation of most 10,000- 15,000 psi casing or tubing spools. The bottom plate is threaded into the bottom prep and is designed for high pressure applications 7" 9" 10-3/4" 4-1/2" 5,000 psi-15,000 psi 5,000 psi-15,000 psi 5" 5,000 psi-15,000 psi 5,000 psi-15,000 psi 5-1/2" 5,000 psi-15,000 psi 5,000 psi-15,000 psi 6-5/8" 5,000 psi-15,000 psi 7" 5,000 psi-15,000 psi 7-5/8" 5,000 psi-15,000 psi 8-5/8" 5,000 psi-15,000 psi 9-5/8" 5,000 psi-15,000 psi Casing Size SpoolNominalBottom Prep
  • 12. C-22/29 Apache C-22 wrap around casing hangers incorporates pack o鍖, slip bowl and slips. Packo鍖 seals the annulus below the slips when casing load is applied. The C-22 Hangers controlled fricition reduces casing de鍖ection. C-22 casing hangers are easy to install and economical. Nominal Bowl Size Casing Size 4-1/2" 5" 5-1/2" 7" 7-5/8" 5-1/2" 7" 7-5/8" 8-5/8" 9-5/8" 9-5/8" 10-3/4" 11-7/8" 13-3/8" 16" 11" 13-5/8" 16-3/4" 20" Overview Apache Pressure Products o鍖ers a wide selection of Casing Hangers. Casing Hanger lands inside the casing head and is responsible for hanging the casing string. We supply both slip and mandrel style casing hangers. Casing Hangers
  • 13. TC1W Tubing Hanger TC1W Wrap around hanger is designed to seal o鍖 the casing annulus at the same time supporting the tubing string and nippling up the christmas tree without the BOP. TC1A Tubing Hanger TC1A is a threaded tubing hanger. The hanger is energized by the weight of the tubing and tightening the lock screws in the tubing head 鍖ange. TC1A-EN Tubing Hanger TC1A-EN is an extended neck TC1A hanger with packing rings that con鍖ne all of the well pressure and 鍖uids to the tubing bore. TC1A-EN hangers can be modi鍖ed to include connections and ports for the hydraulic ontrol line in the event of hydraulically controlled down-hole safety valve installation. Size Wt (lbs) 7 1/16" X 2 3/8" O.D. 70 7 1/16" X 2 7/8" O.D. 70 Size Wt (lbs) 7 1/16" X 2 3/8" O.D. 68 7 1/16" X 2 7/8" O.D. 68 Size Wt (lbs) 7 1/16" X 2 3/8" O.D. 77 7 1/16" X 2 7/8" O.D. 70 Overview Apache Pressure Products o鍖ers a wide selection of tubing hangers. Tubing hangers suspends the production tubing and provide seal o鍖 of the casing annulus.
  • 14. Studded Crosses and Tees Overview Apache Pressure Products o鍖ers a wide selection of crosses and tees in di鍖erent sizes and pressures. A, inch B, inch C, inch D, inch TEE Cross 2-1/16"2,000 2-1/16"2,000 3.50 3.50 2.06 2.06 95 85 2-1/16"5,000 2-1/16"5,000 4.50 4.50 2.06 2.06 160 161 2-9/16"2,000 2-9/16"2,000 4.50 4.50 2.56 2.56 125 119 2-9/16"5,000 2-1/16"5,000 4.50 5.00 2.56 2.06 375 255 2-9/16"5,000 2-9/16"5,000 5.00 5.00 2.56 2.56 350 225 3-1/8"2,000 3-1/8"2,000 4.50 4.50 3.12 3.12 198 185 3-1/8"3,000 2-1/16"5,000 4.50 5.00 3.12 2.06 264 231 3-1/8"3,000 2-9/16"5,000 5.00 5.00 3.12 2.56 350 275 3-1/8"3,000 3-1/8"3,000 5.00 5.00 3.12 3.12 264 271 3-1/8"5,000 2-1/16"5,000 4.50 5.50 3.12 2.06 264 295 3-1/8"5,000 2-9/16"5,000 5.50 5.50 3.12 2.56 364 310 3-1/8"5,000 3-1/8"5,000 5.50 5.50 3.12 3.12 414 321 4-1/16"2,000 4-1/16"2,000 5.50 5.50 4.06 4.06 405 354 4-1/16"3,000 3-1/8"3,000 5.00 6.12 4.06 3.12 451 435 4-1/16"3,000 4-1/16"3,000 6.12 6.12 4.06 4.06 495 451 4-1/16"5,000 2-9/16"5,000 5.00 6.50 4.06 2.56 447 425 4-1/16"5,000 3-1/8"5,000 5.50 6.50 4.06 3.12 488 425 4-1/16"5,000 4-1/16"5,000 6.50 6.50 4.06 2.56 565 486 1-13/16"10,000 1-13/16"10,000 4.38 4.38 1.81 1.81 191 187 1-13/16"15,000 1-13/16"15,000 5.00 5.00 1.81 1.81 257 253 2-1/16"10,000 1-13/16"10,000 4.38 4.38 2.06 1.81 191 187 2-1/16"10,000 2-1/16"10,000 4.38 4.38 2.06 2.06 191 187 2-1/16"15,000 1-13/16"15,000 5.00 5.00 2.06 1.81 257 253 2-1/16"15,000 1-13/16"10,000 5.00 5.00 2.06 2.06 257 253 2-9/16"10,000 2-1/16"10,000 4.50 5.12 2.56 1.81 246 241 2-9/16"10,000 1-13/16"15,000 4.50 5.12 2.56 2.06 246 241 2-9/16"10,000 2-9/16"10,000 5.12 5.12 2.56 2.56 286 280 2-9/16"15,000 1-13/16"15,000 5.50 5.50 2.56 1.81 386 307 2-9/16"15,000 2-1/16"15,000 5.50 5.50 2.56 2.06 389 350 2-9/16"15,000 2-9/16"15,000 5.50 5.50 2.56 2.56 375 335 3-1/16"10,000 1-13/16"10,000 4.50 5.88 3.06 1.81 370 350 3-1/16"10,000 3-1/16"10,000 4.50 5.88 3.06 2.06 370 350 3-1/16"10,000 2-9/16"10,000 5.12 5.88 3.06 2.56 407 433 3-1/16"10,000 3-1/16"10,000 5.88 5.88 3.06 3.06 480 464 3-1/16"15,000 1-13/16"15,000 6.31 6.31 3.06 1.81 486 470 3-1/16"15,000 2-1/16"15,000 6.31 6.31 3.06 2.06 470 440 3-1/16"15,000 2-9/16"15,000 6.31 6.31 3.06 2.56 440 432 3-1/16"15,000 3-1/16"15,000 6.31 6.31 3.06 3.06 430 422 Run Outlets Dimensions Wt. (lbs)
  • 15. Body Bonnet Stem Gate Seat Stem Seal Seat Seal Bonnet Seal API CLASS AA General Non-corrosive Alloy Steel Forging or casting Alloy Steel Forging Alloy Nitrided Alloy Nitrided Alloy Nitrided Te鍖on FKM Graphite PEEK Viton 304or 316SS API CLASS BB General Slightly Corrosive Alloy Steel Forging or casting Alloy Steel Forging A564 Type. 630 (17-4PH) 410 SS Nitrided 410 SS Nitrided Te鍖on FKM Graphite PEEK Viton 304or 316SS API CLASS CC General Moderately Corrosive, CO2 410 Stainless Steel 410 Stainless Steel A564 Type. 630 (17-4PH) 410 SS Nitrided 410 SS Nitrided Te鍖on FKM Graphite PEEK Viton 304or 316SS API CLASS DD-NL Sour Non-corrosive Alloy Steel Forging or casting Alloy Steel Forging Alloy Nitrided Alloy Nitrided Alloy Nitrided Te鍖on FKM Graphite PEEK Viton 304or 316SS API CLASS EE-0,5 Sour Slightly Corrosive Alloy Steel Forging or casting Alloy Steel Forging A564 Type. 630 (17-4PH) 410 SS Nitrided 410 SS Nitrided Te鍖on FKM Graphite PEEK Viton 304or 316SS API CLASS EE-1,5 Sour Moderately Corrosive CO2 Alloy Steel Forging or casting Alloy Steel Forging Inconel 718 410 SS w/Hard facing 410 SS Nitrided Te鍖on FKM Graphite PEEK Viton 304or 316SS API CLASS EE-NL Sour Moderately Corrosive CO2 Alloy Steel Forging or casting Alloy Steel Forging Inconel 718 410 SS w/Hard facing 410 SS Nitrided Te鍖on FKM Graphite PEEK Viton 304or 316SS API CLASS FF-0,5 Sour, Moderately Corrosive, H2S 410 Stainless Steel 410 Stainless Steel A564 Type. 630 (17-4PH) 410 SS Nitrided 410 SS Nitrided Te鍖on FKM Graphite PEEK Viton 304or 316SS API CLASS FF-1,5 Sour Highly Corrosive H2S and CO2 410 Stainless Steel 410 Stainless Steel Inconel 718 410 SS w/Hard facing 410 SS Nitrided Te鍖on FKM Graphite PEEK Viton 304or 316SS API CLASS FF-NL Sour Highly Corrosive H2S and CO2 410 Stainless Steel 410 Stainless Steel Inconel 718 410 SS w/Hard facing 410 SS Nitrided Te鍖on FKM Graphite PEEK Viton 304or 316SS API CLASS HH High Corrosion Alloy Steel w/625 Claded Alloy Steel w/625 Claded Inconel 718 Inconel 718/625 w/Hard facing Inconel 718/625 w/Hard facing Te鍖on FKM Graphite PEEK Viton Inconel 718 Service Condition Body Description Material specification for API 6A Gate Valves
  • 16. The Apache slab gate is a high performance, bi- directional slab gate valve is ideal for high pressure, critical service applications from 3,000 psi through 20,000 psi. Apache slab gate valve utilitizes a forged body and bonnect with alloy steel and at the minimum meets API PSL 2 requirements. Apache slab gate valves comes in variety of trim and product service levels, please consult trim chart or specify well conditions at time of inquiry for the best trim and PSL level for your application. Also available in ball screw or hydraulic operation at higher pressure ratings. Overview Slab Gate Valves Size D (inch) E (inch) Wt (lbs) 1-13/16" 14.8 17 243 2-1/16" 15.5 17 329 2-9/16" 16.5 17 410 3-1/16" 17.4 18.75 518 4-1/16" 19.1 18.75 1118 5-1/8" 24.4 25 1528 3.06 24.38 7.9 BX-154 4.06 26.38 9.8 BX-155 5.12 29 12.7 BX-169 1.81 18.25 5.6 BX-151 2.06 20.5 6.1 BX-152 2.56 22.25 6.8 BX-153 A (Bore, inch) B (inch) C (inch) API Ring Size C (inch) E(inch) Wt (lbs) 1-13/16" 5.9 17 260 2-1/16" 6.5 17 315 2-9/16" 7.7 18.75 576 3-1/16" 9 18.75 602 2.56 21 16.5 BX-153 3.06 23.56 17.4 BX-154 A(Bore, inch) B (inch) D (inch) API Ring 1.81 18 14.8 BX-151 2.06 19 15.5 BX-152 B (inch) D (inch) API Ring 14.62 15.5 R-24 16.62 16.5 R-27 18.62 17.4 R-35 21.62 19.1 R-39 28.62 24.4 R-44 29 27.1 R-46 29 27.3 R-46 32 27.6 R-467-1/16" 7.06 15.3 25 2187 7-1/16"x 6" 6 14.8 25 2106 7-1/16"x 6-3/8" 6.38 15 25 2132 4-1/16" 4.06 8.3 17 688 5-1/8" 5.12 11 18.75 1387 2-9/16" 2.56 5.9 13.5 289 3-1/8" 3.12 6.7 17 419 Size A(Bore, inch) C (inch) E(inch) Wt (lbs) 2-1/16" 2.06 5.1 13.5 216 Flanged 10,000 psi working Pressure Flanged 15,000 psi working Pressure Flanged 5,000 psi working Pressure
  • 17. The Apache expanding gate valve is a bi-directional, with a preferred sealing side valve. For wellhead, production trees, and manifold applications with working pressure rated up to 5,000 psi. Supplied in 鍖anged or threaded connections. Apache expanding gate valves utilizes a wedge gate design for easy manual operation and parts are usually compatible with most major manufacturer and distributors for easy repair and maintenance. Apache expanding gate valves comes in variety of trim and product service levels, please consult trim chart or specify well conditions at time of inquiry for the best trim and PSL level for your application. Size A (Bore,inch) B (inch) C (inch) D (inch) E (inch) # of Turns Wt (lbs) 2-1/16" 2.06 9.62 5.3 19.6 13 13 126 2-9/16" 2.56 10.25 6.1 20.6 13 15-1/2 142 3-1/8" 3.12 11.38 7.6 22.8 16 20 236 4-1/16" 4.06 13 9.4 25.9 16 24-1/2 454 Threaded Size A (Bore, inch) B (inch) C(inch) D(inch) E(inch) # of Turns Wt (lbs) 2-1/16" 2.06 14.62 5.3 19.6 13 13 176 2-9/16" 2.56 16.62 6.1 20.6 13 15-1/2 224 3-1/8" 3.12 18.62 7.6 22.8 16 20 334 4-1/16" 4.06 21.62 9.4 25.9 16 24-1/2 614 Flanged Overview Expanding Gate Valves
  • 18. Ring Joint Gaskets Apache carries a wide selection of Ring Joint Gaskets in low carbon steel or stainless 316. R-Type Octagonal gaskets designed for 鍖anges up to 5,000 psi RX-Type Interchangeable with R-type gaskets RX-type gaskets are pressure-energized for improved sealing e鍖ciency BX-Type High pressure gaskets for working pressures up to 20,000 psi. Designed with pressure balance hole to equalize potential trapped gases within the grooves. B7 Stud and nuts B7 bolts are available in either two nuts per stud, tap end or combo styles. Standard B7 are black 鍖nish. Special tap end thread con鍖guration, 鍖nish or length requirements are available upon request. Needle Valves Apache o鍖ers a full line of needle valves in carbon steel AISI 1040 or Stainless 316. Various body style and seat selection ensures the right valve for your application. Available in 6,000 psi and 10,000 psi. Oilfield Ball Valves Carbon by Stainless threaded ball valves with pressure rating up to 5,000 psi. Available from 1 to 3 in both reduced and full port. All oil鍖eld ball valves are equipment with a grease 鍖tting. Also available in bolted pattern body style. Consumables
  • 19. 1. PRICING - Products and services provided will be invoiced at the price shown and agreed upon at the time of service, invoice, or, as printed on any and/or all Apache Pressure Products sales/information material including purchase orders, letters, or emails. Printed prices do not include freight or any applicable taxes. Taxes and other fees such as shipping will be quoted and or billed as per order, or as required. 2. TREMS OF PAYMENT Payment is due upon receipt or as agreed to by contract. Any unpaid past due balance will accrue interest and penalties at the rate of 12% APR, or the max allowed by state law, for the period that the past due balance remains unpaid, and shall not be less than twenty dollars ($20.00). Further customers agree to pay all attorney and/or collection fees and waives notice of such should subsequent litigation become required to effect collection or to assert our interest for unpaid balances. 3. QUOTATIONS - All quotations and sales are F.O.B. our plant in Manvel, Texas. Net prices and discounts are subject to change without notice. Prices in effect at the time of receipt of order whether higher or lower, will prevail. All sales tax, use tax, or other excise taxes which may be required by law to be paid in connection with any sale will be added to the gross sales price. 4. DELIVERY/FREIGHT - All shipments are F.O.B. Manvel, Texas unless otherwise stated. All promises of shipments are as closely estimated as possible. We will make every effort to ship within the time promised, but do not guarantee to do so, or assume further or implied liability with respect to delivery dates or timelines. Our responsibility ceases upon delivery to any common carrier or other agent furnished or specified by the customer and we do not, unless previously instructed, insure shipments beyond the point of delivery to such carriers. Full freight allowance will be covered on individual orders of $3000.00-$5000.00 based upon the state to which the shipment will be delivered to. The Freight carrier will be chosen by the seller unless otherwise instructed or agreed upon in advance by both parties. Individual orders that do not meet the required amount will not receive freight allowance. 5. SHORTAGES AND DAMAGES IN TRANSIT - All claims for shortages or damaged products must be made within five days after receipt of shipment. All lost or damaged materials in transit become the responsibility. 6. WARRANTY - This warranty is in lieu of all other warranties, expressed or implied, including any implied warranty or merchantability or fitness for any use or purpose. All of Apache Pressure Products INC. products are warranted to be free from manufacturing defects and workmanship for a period of one (1) year from the date of shipment, and if found to be defective within that period the product will be replaced at no charge to the customer. However, the product being returned must have been used in accordance with the intended or published purpose, and approved installation and operating practices. There must be a properly filled out return authorization (RA) before credit or replacement will be offered. 7. CANCELLATIONS/CHANGES - Cancellations or instructions to change work or delivery must be submitted in writing to the seller. If any order is canceled the buyer will be responsible for the payment of work already performed and any material already in use.
  • 20. APACHE PRESSURE PRODUCTS 3909 BAILEY AVE MANVEL, TX 77578 (713) 941-1669 (713) 941-2660 WWW.APACHEMFG.COM