ºÝºÝߣ

ºÝºÝߣShare a Scribd company logo

Asynchronous Presentation

•Download as PPTX, PDF•
•
Lyka Arianne Arellano
Lyka Arianne Arellano

1. The document provides instructions for making a star-shaped Filipino Christmas decoration called a parol. It involves tying bamboo sticks together to form star shapes and securing them with rubber bands. 2. Pegs are inserted into the center pentagon shape and secured with hot glue. Cellophane is applied to the center using glue. 3. The points of the stars are then covered with cellophane by gluing it directly to the bamboo edges. Once all edges are covered, the front faces of the stars are glued with cellophane.

1 of 9
Download to read offline
Asynchronous Presentation
Asynchronous Presentation
1. The first step is to get 2 of the bamboo sticks and tie one end together with rubber bands. Make 3 more bamboo V's. You should end up with 4 bamboo V's and 2 left over sticks.
2. In the next step we will make the star shape. To make it easier to understand how to do this the next images will be color coded. The red sticks will make the top point of the star. Make a W shape with 2 of the V's with the left V overlapping the right V. Now bring over the right stick so it sandwiches one leg of the left V. With loose leg of the left V bring it under and combine it with the right V. Use a rubber band and tie the point together. You should end up with an A shape.
3. Now with one of the single bamboo sticks, thread it through the center of the A. Make sure that all sticks overlap each other. Repeat these steps and make another star. Now that you have 2 stars, combine them and tie all the points together with rubber bands, forming one single star.
4. Notice that the center of the star frame is a pentagon. With the stars securely tied together, pull apart the center of the frame. Now place one peg at each of the point of the pentagon. Now we have a completed Parol frame, but before we go any further we have to secure the pegs. We do this by using hot glue. Put hot glue where the peg meets the frame. Be sure to get both sides of the peg.
5. Use the glue stick to put down a good amount of glue on the center of the frame. Now we put the cellophane. You want to do as less cutting as possible. Line up the straight edge of the cellophane with one of the bamboo sticks, so now you only need to cut 4 sides instead of 5. Use your scissors and cut the extra cellophane from the center of the frame. You don't need to cut too close just do a rough cut around the edge.
6. Put some glue on the loose bits of cellophane and rap it underneath the bamboo to get a clean edge. Now cover the center of the reverse side of the star. Once that is done we start decorating the points of the parol. Put glue on front and reverse side of a point. Then place the cellophane.
7. Keep repeating this step until you have all the edges of your parol covered. Now we finish the parol by covering the front face of the star. Put glue around the one point (the triangle) of the parol. Place a piece of cellophane on the point of the star making sure that the straight edge is on the center of the star. This is so you don't have to cut in the center of the parol. Now repeat for the rest of the points of the parol.

More Related Content

Asynchronous Presentation

  • 3. 1. The first step is to get 2 of the bamboo sticks and tie one end together with rubber bands. Make 3 more bamboo V's. You should end up with 4 bamboo V's and 2 left over sticks.
  • 4. 2. In the next step we will make the star shape. To make it easier to understand how to do this the next images will be color coded. The red sticks will make the top point of the star. Make a W shape with 2 of the V's with the left V overlapping the right V. Now bring over the right stick so it sandwiches one leg of the left V. With loose leg of the left V bring it under and combine it with the right V. Use a rubber band and tie the point together. You should end up with an A shape.
  • 5. 3. Now with one of the single bamboo sticks, thread it through the center of the A. Make sure that all sticks overlap each other. Repeat these steps and make another star. Now that you have 2 stars, combine them and tie all the points together with rubber bands, forming one single star.
  • 6. 4. Notice that the center of the star frame is a pentagon. With the stars securely tied together, pull apart the center of the frame. Now place one peg at each of the point of the pentagon. Now we have a completed Parol frame, but before we go any further we have to secure the pegs. We do this by using hot glue. Put hot glue where the peg meets the frame. Be sure to get both sides of the peg.
  • 7. 5. Use the glue stick to put down a good amount of glue on the center of the frame. Now we put the cellophane. You want to do as less cutting as possible. Line up the straight edge of the cellophane with one of the bamboo sticks, so now you only need to cut 4 sides instead of 5. Use your scissors and cut the extra cellophane from the center of the frame. You don't need to cut too close just do a rough cut around the edge.
  • 8. 6. Put some glue on the loose bits of cellophane and rap it underneath the bamboo to get a clean edge. Now cover the center of the reverse side of the star. Once that is done we start decorating the points of the parol. Put glue on front and reverse side of a point. Then place the cellophane.
  • 9. 7. Keep repeating this step until you have all the edges of your parol covered. Now we finish the parol by covering the front face of the star. Put glue around the one point (the triangle) of the parol. Place a piece of cellophane on the point of the star making sure that the straight edge is on the center of the star. This is so you don't have to cut in the center of the parol. Now repeat for the rest of the points of the parol.