This document provides an overview of biomechanics of posture. It defines static and dynamic posture and describes the major goals and elements of postural control, including maintaining the body's center of gravity over its base of support. It discusses perturbations that can disrupt posture and the compensatory muscle synergies and strategies used to regain equilibrium, such as ankle and hip synergies. The document also covers kinetics of posture involving forces like inertia, gravity and ground reaction forces. It analyzes optimal posture and deviations, and describes various postural abnormalities.
Joint mobilization refers to a technique of manual therapy by which a therapist applies a brief stretch of 30s or less through traction and gliding along a joint surface.
The document discusses the scapulohumeral rhythm, which is the coordinated movement between the glenohumeral joint and scapulothoracic joint during shoulder movement. Specifically, it notes that for every 2 degrees of shoulder abduction or flexion, the scapula upwardly rotates approximately 1 degree. This ratio maintains proper shoulder range of motion and prevents impingement. Clinical issues like frozen shoulder and scapular winging can result from impairments affecting the scapulothoracic joint.
The document summarizes the biomechanics of the shoulder joint, including its components and motions. It describes the sternoclavicular joint, acromioclavicular joint, glenohumeral joint, and scapulothoracic joint. It details the ligaments and muscles that provide stability and allow movement at each joint. Key points are that shoulder function requires integrated and coordinated motion of all its parts, and the rotator cuff and scapular stabilizers are essential for dynamic stabilization of the glenohumeral joint during arm movement.
This document discusses active and passive insufficiency in muscles. Active insufficiency occurs when a multi-joint muscle shortens over both joints simultaneously, losing tension. Passive insufficiency occurs when a multi-joint muscle is lengthened to its fullest extent at both joints, preventing full range of motion. Examples given are the rectus femoris causing active insufficiency in hip flexion and knee extension together, and the flexor digitorum profundus losing the ability to make a tight fist when the wrist is flexed. The relationship between them is that when the agonist contracts, the antagonist relaxes or lengthens, so the extensibility of the antagonist can limit the agonist's capability,
This document provides an overview of the anatomy of the knee joint. It describes the bones that make up the knee (femur, tibia, patella). It then discusses the tibiofemoral joint and patellofemoral joint. It provides details on the degrees of freedom in the knee joint and the ligaments, menisci, and other structures that are involved in the knee joint.
The elbow complex is designed to provide mobility and stability for the hand. It consists of three joints - the humeroulnar joint between the humerus and ulna, the humeroradial joint between the humerus and radius, and the superior and inferior radioulnar joints. These joints allow for flexion-extension, pronation, and supination movements. The elbow is stabilized by ligaments and muscles like the biceps brachi, triceps, and pronators. Common problems affecting the elbow include tennis elbow, golfer's elbow, nursemaid's elbow, and cubital tunnel syndrome.
Biomwchanics of wrist and hand
- Kinematics and Kinetics of joints including flexion and extension mechanism
-Pathomechanics
- Prehension
-Functional position of wrist
The document provides details about the biomechanics of the thorax, including its general structures, bones, joints, ligaments, and muscles involved in ventilation. The key structures discussed are the ribs, sternum, thoracic vertebrae, and their articulations. The document describes the types of joints between these structures, including the costovertebral, costotransverse, costochondral, and sternocostal joints. It also summarizes the primary muscles that promote inspiration, such as the diaphragm, intercostals, and scalenes.
This document discusses prehension, or gripping, which is made possible by the opposable thumb in humans. It describes two main types of grip: power grip, which involves the whole hand and is used to hold cylindrical or spherical objects, and precision grip, which requires finer motor control and pad-to-pad, tip-to-tip, or pad-to-side contact between the thumb and fingers. Specific grips like hook, spherical, and lateral grips are subtypes of power grip. Precision grips depend on intact sensation and muscles like the flexor pollicis brevis and opponens pollicis. The functional position of the wrist and fingers optimizes power and efficiency of grip.
1. The document discusses the biomechanics of the lumbar spine, including its osteology, articulations, ligaments, muscles, blood supply, and kinematics.
2. Key structures include the five lumbar vertebrae and intervertebral disks, facet joints, and ligaments like the anterior longitudinal ligament.
3. The major muscles are the erector spinae and multifidus posteriorly and abdominal muscles like rectus abdominis anteriorly. Range of motion includes flexion, extension, lateral flexion, and rotation.
Frenkel exercises are a series of movements developed to treat patients with loss of proprioception. The exercises start simple and increase in difficulty, using visual and auditory cues to facilitate restoration of smooth, coordinated movement. Key principles are concentration, precision, and repetition of movements like limb motions and transfers of weight. Exercises progress from lying to sitting to standing positions and incorporate movement of the legs, arms, and whole body. The goal is to improve coordination, balance, proprioception and control through attention to rhythmic counting and placement of limbs in specific positions.
This document defines joint mobilization techniques and provides guidelines for their use. It describes mobilization as a manual therapy that uses passive joint movement to increase range of motion or decrease pain. Accessory joint movements like gliding and traction are explained. Precautions and contraindications for mobilization are outlined. A grading scale from I to V is presented to indicate the amplitude of oscillations used in different mobilization techniques.
A chronicle on muscle strengthening:
MMT is a procedure for the evaluation of strength of individual
muscle or muscles group, based upon the effective performance of a movement in relation to the forces of gravity or manual resistance through the available ROM.
Posture - a perquisite for functional abilities in daily life. Posture is a combination of anatomy and physiology with inherent application of bio-mechanics and kinematics. Sitting, standing, walking are all functional activities depending on the ability of the body to support that posture to carry out each activity. Injuries and pathologies either postural or structural can massively change the bio-mechanics of posture and thus affect functional abilities.
The document summarizes the anatomy and biomechanics of the shoulder joint. It describes the three joints that make up the shoulder complex - the sternoclavicular joint, acromioclavicular joint, and glenohumeral joint. For each joint, it outlines the bony structures, ligaments, range of motion, and stabilizing muscles involved. It then discusses the kinetics of the glenohumeral joint, including the static stabilization of the humeral head both with the arm unloaded and loaded at the side through the resultant force of surrounding structures.
This document discusses the biomechanics of the patellofemoral joint. It describes the anatomy of the patella and its articulation with the femur. As the knee flexes and extends, the patella translates and rotates in complex motions to maintain contact within the femoral groove. The patellofemoral joint experiences high stresses from quadriceps forces, especially between 30-90 degrees of flexion when contact area is increasing. Several mechanisms help minimize stresses on the joint.
The document provides information on the biomechanics of the wrist joint. It discusses the basic anatomy including the ligaments and muscles. It describes the two joints of the wrist complex - the radiocarpal and midcarpal joints. It details the range of motion of the wrist in flexion, extension, ulnar deviation, and radial deviation. It explains the osteokinematics and arthrokinematics of wrist movement including the convex-concave rule and how the bones roll and slide during flexion, extension, ulnar deviation, and radial deviation.
The document discusses different types and methods of traction used in physiotherapy. It defines traction as a mechanical force applied to separate joint structures and stretch surrounding soft tissues. There are four main types of traction: mechanical, self, positional, and manual. Mechanical traction can be further divided into over door cervical traction and electrical traction. The document then covers application techniques for cervical, thoracic, and lumbar traction, highlighting factors like force levels, durations, angles, and positioning. Recommended parameters are provided for initial treatment phases and specific treatment goals for each spinal region.
The document discusses the range of motion of muscle work, specifically focusing on the quadriceps and hamstrings muscles. It defines the full range of motion as the muscle changing from full stretch to maximal shortening. This full range is divided into the outer, middle, and inner ranges. It then provides details on the specific ranges of motion for the quadriceps and hamstrings muscles, and how weaknesses in certain ranges can impact functions like stair climbing or cause pain. Physiotherapy exercises often target strengthening the quadriceps muscle throughout its full range of motion.
This document provides an overview of posture, including definitions, types, mechanisms, patterns, principles of re-education, and presentation of good posture. It defines posture as the body's position either at rest or during movement. There are inactive postures for rest and active static and dynamic postures that require muscle coordination. Posture is maintained through complex reflexes involving muscles, eyes, ears, and joints. Good posture is efficient with minimal effort, while poor posture is inefficient and causes unnecessary muscle strain. Re-education of posture focuses on identifying and treating causes, gaining patient cooperation, relaxation/mobility exercises, and establishing new posture habits through repetition and education.
This document provides an overview of biomechanics of the elbow, including its structure, function, kinematics, muscle actions, and stability mechanisms. It describes the three joints that make up the elbow complex - the humeroulnar joint, humeroradial joint, and proximal radioulnar joint. It details the motions of elbow flexion/extension and forearm pronation/supination, identifying the muscles, ligaments, and bony structures involved in each motion. Common injuries to the elbow from direct stresses and repeated stresses are also summarized.
Frenkel's Exercise (Bangladesh Health Profession Institute) CRPBipul Debnath
油
This document provides an overview and instructions for Frenkel's Exercises, which were developed in 1889 by Swiss physician Heinrich Sebastian Frenkel to treat patients with sensory ataxia and loss of proprioception. The exercises are a series of gradual, progressive movements designed to improve coordination, control, and confidence in movement. The document describes the indications, principles, techniques, and specific exercises for the lower and upper extremities in different positions like lying, sitting, and standing. It also discusses factors that affect the exercises and how to progress the routine based on the patient's disability level and control.
Functional re-education aims to retrain patients' movements and activities that they already know but cannot properly perform due to illness or injury. The goal is to increase independence through a tailored program of progressive exercises. Exercises may include rolling, sitting, kneeling, standing, and walking activities. Principles include thorough assessment, task-specific treatment, and avoiding discouragement to build confidence and independence over time.
Joint mobilization is a manual therapy technique used to modulate pain, increase range of motion, and treat joint dysfunctions. It involves passive movement of joints and surrounding soft tissues at varying speeds and amplitudes. There are 5 types of joint movement - roll, slide, spin, compression, and distraction. Mobilization techniques are graded based on amplitude and location within the range of motion. Lower grades are used for pain modulation while higher grades aim to increase mobility. Proper positioning, stabilization, direction, and patient response are important considerations when applying mobilization.
This document discusses quadriceps inhibition, including its causes and treatment using electrotherapy. It begins with an overview of quadriceps anatomy. Common causes of quadriceps inhibition include fractures of the femur, meniscal injuries, traumatic knee synovitis, and soft tissue injuries around the knee. The treatment procedure involves examining and preparing the patient, setting up the electrotherapy apparatus, placing electrodes on the thigh, and administering a current to contract the quadriceps muscle and reduce inhibition. The treatment is administered with the patient in a half-lying position with the knee flexed at 15 degrees.
This document discusses the biomechanics of posture. It defines posture as the relative arrangement of body parts in relation to gravity. There are static and dynamic types of posture. The biomechanics of posture involves analyzing the kinetics and kinematics of all body segments. Perfect posture reduces stress on muscles and joints. However, the erect human posture is less stable than quadrupedal postures due to a smaller base of support and the location of the center of gravity being further from the base. Proper balance and control of posture depends on compensating for forces from gravity and maintaining stability of individual body segments and the whole body.
The document discusses posture, including the development and curvature of the spine, definition of normal and poor posture, types of posture, advantages of good posture, causes of poor posture, and evaluation of posture. It defines normal posture and outlines how to analyze posture from the front, back, and side views by examining spinal curves, pelvic tilt, leg alignment, and other factors. Deviations from normal alignment like kyphosis, lordosis, and scoliosis are also described.
This document discusses prehension, or gripping, which is made possible by the opposable thumb in humans. It describes two main types of grip: power grip, which involves the whole hand and is used to hold cylindrical or spherical objects, and precision grip, which requires finer motor control and pad-to-pad, tip-to-tip, or pad-to-side contact between the thumb and fingers. Specific grips like hook, spherical, and lateral grips are subtypes of power grip. Precision grips depend on intact sensation and muscles like the flexor pollicis brevis and opponens pollicis. The functional position of the wrist and fingers optimizes power and efficiency of grip.
1. The document discusses the biomechanics of the lumbar spine, including its osteology, articulations, ligaments, muscles, blood supply, and kinematics.
2. Key structures include the five lumbar vertebrae and intervertebral disks, facet joints, and ligaments like the anterior longitudinal ligament.
3. The major muscles are the erector spinae and multifidus posteriorly and abdominal muscles like rectus abdominis anteriorly. Range of motion includes flexion, extension, lateral flexion, and rotation.
Frenkel exercises are a series of movements developed to treat patients with loss of proprioception. The exercises start simple and increase in difficulty, using visual and auditory cues to facilitate restoration of smooth, coordinated movement. Key principles are concentration, precision, and repetition of movements like limb motions and transfers of weight. Exercises progress from lying to sitting to standing positions and incorporate movement of the legs, arms, and whole body. The goal is to improve coordination, balance, proprioception and control through attention to rhythmic counting and placement of limbs in specific positions.
This document defines joint mobilization techniques and provides guidelines for their use. It describes mobilization as a manual therapy that uses passive joint movement to increase range of motion or decrease pain. Accessory joint movements like gliding and traction are explained. Precautions and contraindications for mobilization are outlined. A grading scale from I to V is presented to indicate the amplitude of oscillations used in different mobilization techniques.
A chronicle on muscle strengthening:
MMT is a procedure for the evaluation of strength of individual
muscle or muscles group, based upon the effective performance of a movement in relation to the forces of gravity or manual resistance through the available ROM.
Posture - a perquisite for functional abilities in daily life. Posture is a combination of anatomy and physiology with inherent application of bio-mechanics and kinematics. Sitting, standing, walking are all functional activities depending on the ability of the body to support that posture to carry out each activity. Injuries and pathologies either postural or structural can massively change the bio-mechanics of posture and thus affect functional abilities.
The document summarizes the anatomy and biomechanics of the shoulder joint. It describes the three joints that make up the shoulder complex - the sternoclavicular joint, acromioclavicular joint, and glenohumeral joint. For each joint, it outlines the bony structures, ligaments, range of motion, and stabilizing muscles involved. It then discusses the kinetics of the glenohumeral joint, including the static stabilization of the humeral head both with the arm unloaded and loaded at the side through the resultant force of surrounding structures.
This document discusses the biomechanics of the patellofemoral joint. It describes the anatomy of the patella and its articulation with the femur. As the knee flexes and extends, the patella translates and rotates in complex motions to maintain contact within the femoral groove. The patellofemoral joint experiences high stresses from quadriceps forces, especially between 30-90 degrees of flexion when contact area is increasing. Several mechanisms help minimize stresses on the joint.
The document provides information on the biomechanics of the wrist joint. It discusses the basic anatomy including the ligaments and muscles. It describes the two joints of the wrist complex - the radiocarpal and midcarpal joints. It details the range of motion of the wrist in flexion, extension, ulnar deviation, and radial deviation. It explains the osteokinematics and arthrokinematics of wrist movement including the convex-concave rule and how the bones roll and slide during flexion, extension, ulnar deviation, and radial deviation.
The document discusses different types and methods of traction used in physiotherapy. It defines traction as a mechanical force applied to separate joint structures and stretch surrounding soft tissues. There are four main types of traction: mechanical, self, positional, and manual. Mechanical traction can be further divided into over door cervical traction and electrical traction. The document then covers application techniques for cervical, thoracic, and lumbar traction, highlighting factors like force levels, durations, angles, and positioning. Recommended parameters are provided for initial treatment phases and specific treatment goals for each spinal region.
The document discusses the range of motion of muscle work, specifically focusing on the quadriceps and hamstrings muscles. It defines the full range of motion as the muscle changing from full stretch to maximal shortening. This full range is divided into the outer, middle, and inner ranges. It then provides details on the specific ranges of motion for the quadriceps and hamstrings muscles, and how weaknesses in certain ranges can impact functions like stair climbing or cause pain. Physiotherapy exercises often target strengthening the quadriceps muscle throughout its full range of motion.
This document provides an overview of posture, including definitions, types, mechanisms, patterns, principles of re-education, and presentation of good posture. It defines posture as the body's position either at rest or during movement. There are inactive postures for rest and active static and dynamic postures that require muscle coordination. Posture is maintained through complex reflexes involving muscles, eyes, ears, and joints. Good posture is efficient with minimal effort, while poor posture is inefficient and causes unnecessary muscle strain. Re-education of posture focuses on identifying and treating causes, gaining patient cooperation, relaxation/mobility exercises, and establishing new posture habits through repetition and education.
This document provides an overview of biomechanics of the elbow, including its structure, function, kinematics, muscle actions, and stability mechanisms. It describes the three joints that make up the elbow complex - the humeroulnar joint, humeroradial joint, and proximal radioulnar joint. It details the motions of elbow flexion/extension and forearm pronation/supination, identifying the muscles, ligaments, and bony structures involved in each motion. Common injuries to the elbow from direct stresses and repeated stresses are also summarized.
Frenkel's Exercise (Bangladesh Health Profession Institute) CRPBipul Debnath
油
This document provides an overview and instructions for Frenkel's Exercises, which were developed in 1889 by Swiss physician Heinrich Sebastian Frenkel to treat patients with sensory ataxia and loss of proprioception. The exercises are a series of gradual, progressive movements designed to improve coordination, control, and confidence in movement. The document describes the indications, principles, techniques, and specific exercises for the lower and upper extremities in different positions like lying, sitting, and standing. It also discusses factors that affect the exercises and how to progress the routine based on the patient's disability level and control.
Functional re-education aims to retrain patients' movements and activities that they already know but cannot properly perform due to illness or injury. The goal is to increase independence through a tailored program of progressive exercises. Exercises may include rolling, sitting, kneeling, standing, and walking activities. Principles include thorough assessment, task-specific treatment, and avoiding discouragement to build confidence and independence over time.
Joint mobilization is a manual therapy technique used to modulate pain, increase range of motion, and treat joint dysfunctions. It involves passive movement of joints and surrounding soft tissues at varying speeds and amplitudes. There are 5 types of joint movement - roll, slide, spin, compression, and distraction. Mobilization techniques are graded based on amplitude and location within the range of motion. Lower grades are used for pain modulation while higher grades aim to increase mobility. Proper positioning, stabilization, direction, and patient response are important considerations when applying mobilization.
This document discusses quadriceps inhibition, including its causes and treatment using electrotherapy. It begins with an overview of quadriceps anatomy. Common causes of quadriceps inhibition include fractures of the femur, meniscal injuries, traumatic knee synovitis, and soft tissue injuries around the knee. The treatment procedure involves examining and preparing the patient, setting up the electrotherapy apparatus, placing electrodes on the thigh, and administering a current to contract the quadriceps muscle and reduce inhibition. The treatment is administered with the patient in a half-lying position with the knee flexed at 15 degrees.
This document discusses the biomechanics of posture. It defines posture as the relative arrangement of body parts in relation to gravity. There are static and dynamic types of posture. The biomechanics of posture involves analyzing the kinetics and kinematics of all body segments. Perfect posture reduces stress on muscles and joints. However, the erect human posture is less stable than quadrupedal postures due to a smaller base of support and the location of the center of gravity being further from the base. Proper balance and control of posture depends on compensating for forces from gravity and maintaining stability of individual body segments and the whole body.
The document discusses posture, including the development and curvature of the spine, definition of normal and poor posture, types of posture, advantages of good posture, causes of poor posture, and evaluation of posture. It defines normal posture and outlines how to analyze posture from the front, back, and side views by examining spinal curves, pelvic tilt, leg alignment, and other factors. Deviations from normal alignment like kyphosis, lordosis, and scoliosis are also described.
Strength training for sport - FILEX 2013Mark McKean
油
The document discusses differences between general gym strength training programs and sport-specific strength training. It outlines the science behind strength training goals for different sports, including maximal strength, contraction speed, and force output. It provides examples of typical weekly strength training schedules for various athletes and tips for coaches on effective exercise selection, programming, and progression for sport-specific strength training.
1. The document discusses posture analysis and identifies key aspects to evaluate, including the spinal curves, pelvis, shoulders, and lower extremities from the lateral, posterior, and anterior views.
2. Correct posture maintains the natural curves of the spine with minimal joint stress, while poor posture can result from positional habits, muscle imbalances, or underlying medical conditions and lead to increased joint stress.
3. A thorough posture analysis examines the body with reference to plumb lines and assesses for common postural faults in each region, such as rounded shoulders, anterior pelvic tilt, or foot pronation.
Posture is maintained through a combination of muscle tone and reflexes. The muscles that maintain posture contain a high proportion of slow-twitch fibers to allow for sustained contraction. Postural reflexes integrate inputs from proprioceptors, the vestibular system and visual system to make continuous corrections to muscle activity and maintain balance. The spinal cord, brainstem and cerebellum are involved in regulating these reflexes. Upright human posture relies on minimal muscle activity but reflex adjustments of antigravity muscles in response to sway to oppose the effects of gravity.
Proper body mechanics are important when assisting patients to prevent injury. Key principles include getting adequate help from the patient or others, avoiding twisting movements, keeping a wide base of support, and using the arms and legs rather than the back to share the load. The document reviews range of motion exercises and common assistive devices like pillows and splints, and covers different bed positions like supine, prone, and side-lying that impact body mechanics.
The document discusses the concept of center of gravity and how it relates to an object's stability. It defines center of gravity as the point where an object's entire weight seems to act and explains that an object's stability depends on the position of its center of gravity relative to its base. Specifically, an object will be stable if tilting moves the center of gravity higher within the base, unstable if tilting lowers it outside the base, and neutrally stable if tilting does not change the height. Real-life examples like buses and lamps are designed with low, broad bases to lower the center of gravity and increase stability.
The document discusses center of gravity and stability. It defines key terms like center of mass, center of gravity, and equilibrium. It explains that an object's center of gravity depends on the distribution of its mass, and that an object will topple if its center of gravity extends beyond its base of support. The document also distinguishes between stable, unstable, and neutral equilibrium based on how the center of gravity changes with displacement.
The document discusses body mechanics, which refers to the efficient, coordinated, and safe use of the body to move objects and carry out daily activities. Maintaining proper body mechanics is important to prevent injury by keeping the body aligned, the center of gravity low and over the base of support, and using large muscle groups rather than small ones like in the back. Specific guidelines are provided for lifting, pulling, pushing, pivoting, and moving clients safely.
Posture refers to the alignment of the body parts when standing in a relaxed stance. Good posture involves training the body to stand, sit and lie in positions that place the least strain on supporting muscles and ligaments. There is no single definition of "normal" posture as everyone's body is different. Maintaining proper posture can help decrease joint stress and strain, prevent back pain, and contribute to a good appearance. Poor posture is corrected through exercises and therapies that realign the body and strengthen weak muscles. Daily posture exercises can help reinforce good habits and balance.
Year 11 biomechanics with levers, force summationryanm9
油
The document discusses key concepts in biomechanics including:
- Characteristics of linear, angular, and general motion.
- Centre of gravity and how it can change depending on body position.
- Line of gravity and base of support in relation to stability.
- Newton's laws of motion and how they apply to human movement.
- Force summation and how multiple body parts can work together to maximize force.
- Projectile motion principles like gravity, speed, height, and angle of release that influence how objects are thrown or projected.
Posture is a position or attitude of the body a relative arrangement of body part
for a specific activity or a characteristic manner of bearing the body.
This document provides an overview of posture biomechanics, including:
1. Definitions of static and dynamic posture, and descriptions of optimal sagittal and frontal plane alignment.
2. Explanations of how posture is controlled through sensory inputs, muscle activity, and strategies like fixed support and changing support.
3. Analyses of deviations from optimal posture, including positions of the foot, knee, spine, and effects of sitting and lying postures. Factors like age, gender, and occupation are also discussed.
This document defines and describes different types of posture including static, dynamic, and ideal posture. It explains that posture results from the interaction of muscles, bones, and ligaments working together. Static posture maintains a constant position while dynamic posture adjusts with movement. Ideal posture minimizes strain and maximizes support. The document then describes common faulty postures involving the head, neck, shoulders, trunk, and pelvis. It details how different muscle imbalances can lead to issues like forward head, sway back, military-type posture, and lower crossed syndrome. The document also discusses scoliosis and how it is detected.
POSTURE
Dr. Quazi Huma
MPT Neurosciences
Asst Professor
Objectives
Definition
Human posture quadruped to bipedal
Postural Control
Analysis of all views
Physiological Deviations
Factors affecting posture
Definition
Good posture is the attitude which, is assumed by body parts to maintain stability and balance with minimum effort and least strain during supportive and non supportive positions.
CHARACTERISTICS OF GOOD POSTURE (Prerequisites of good posture)
For good posture to be maintained the following must be obtained:
The ability to maintain 'the body upright in good and erect position with less energy.
The ability to maintain balance in upright position via keeping the line of gravity near the center of the base of support.
Quadruped Vs Bipedal
Quadruped posture
Body weight is distributed between the upper and lower extremities
Good stability
Bipedal posture
Unique found in human
Small BOS
Use of upper extremities
Instability caused by a small BoS and a high CoM
BASE OF SUPPORT
BOS is defined by an area bounded posteriorly by the tips of the heels and anteriorly by a line joining the tips of the toes
CENTER OF MASS
It is the point where the mass of the body is centered
Position of the CoM is not fixed
CoM moves lower to a location in the standing adult at about the level of the second sacral segment in the midsagittal plane.
POSTURAL CONTROL
refers to a persons ability to maintain stability of the body and body segments in response to forces that threaten to disturb the bodys equilibrium
POSTURAL CONTROL
STATIC POSTUREThe body and its segments are aligned and maintained in certain position
DYNAMIC POSTUREPostures in which the body or its segments are moving
PLUMB LINE
ANALYSIS OF POSTURE IN SAGITTAL VIEW
DEVIATION IN SAGITTAL VIEW
FLEXED KNEE POSTURE
GENU RECURVATUM
KYPHOTIC AND LORDOTIC CURVES
DOWAGERS HUMP AND GIBBUS DEFORMITY
ANALYSIS OF POSTURE IN FRONTAL VIEW
A. NORMAL FOOT B. PES PLANUS
C. PES CAVUS
ANALYSIS OF POSTURE IN CORONAL VIEW
FACTORS AFFECTING POSTURE
THANK YOU!!!!
Pamela K. Levangie, Cynthia C. Norkin; Joint Structure and Function: A Comprehensive Analysis 4th Edition.
The document discusses hip joint anatomy and biomechanics from the perspective of total hip arthroplasty. It describes key terms like kinematics and kinetics. It provides details on normal ranges of motion for the hip. It discusses femoral head anatomy and the forces acting on the hip during single leg stance, which can be up to 4 times body weight. Factors like leg length, weight, and abductor lever arm influence joint loading.
This document discusses the biomechanics of the hip joint. It begins by defining biomechanics and describing the mobility and stability of the hip. It then discusses forces acting on the hip like body weight, abductor muscles, and joint reaction forces. It explains how these forces are balanced in different positions like two-leg stance, single-leg stance, and with the use of a cane. The document concludes by discussing implications for conditions like coxa valga and coxa vara, and principles of total hip replacement surgery.
This document discusses the biomechanics of the hip joint. It describes how the hip functions as a lever with the body weight and abductor muscles producing forces on either side of the fulcrum. It explains how the hip is designed to provide both mobility and stability. Key factors like the neck angle, acetabular direction, and forces during activities like standing, walking and running are summarized. The effects of conditions like coxa valga and coxa vara on hip biomechanics are also outlined. Lastly, the biomechanical goals and considerations for total hip replacement surgery are presented.
This document defines posture and describes the different types of posture including static, dynamic, and abnormal postures. It discusses postural control and how it is maintained through various body systems. Key points of postural control include control of body orientation in space, maintaining center of gravity over base of support, and stabilizing the head. The document also examines postural strategies like fixed support synergies and changing support synergies that help restore equilibrium when perturbed. Sitting and lying postures are analyzed as well in terms of alignment and pressures on the spine.
Human posture is influenced by mechanical, anatomical, and physiological factors. A good posture protects the body from injury by maintaining balanced alignment. It differs between individuals based on their body type and environment. Posture is dynamic and changes with body position and movement throughout life. It involves control systems to counteract gravity and stabilize body segments during both static and dynamic activities.
Starting Position.pptx(Fundamental position or Posture required for physiothe...nidhiagarwal260755
油
Position is assumed by the body and take movement to come in a equilibrium.
Posture follows movements like a shadow.
Movement- Every movement begin with posture and end with posture.
Posture- Posture is an attitude either with support or without support.
The posture from which movement is initiated are known as standing position.
The movement may be either by active or passive.
STARTING POSITION- The movement either active or passive which comes our body in equilibrium with attitude and with less effort then the position is known as starting position.
There are five types of starting position that is known as Fundamental position. These are:-
Standing
Kneeling
Sitting
Lying
Hanging
This PPT helps the students to learn the different type of postures which are needed to treat the patient. Easy to understand the importance of Starting positions. Easily to understand the muscle effects in different fundamental positions and their benefits
This document discusses the biomechanics of the hip and pelvis. It begins by defining biomechanics and describing the mobility and stability of the hip joint. It then covers the angles of the femoral neck, direction of the acetabulum, and axes of the lower limb. Key biomechanical concepts discussed include levers, forces across the hip joint, and instant centers of rotation. Specific examples analyzed include forces in single leg stance, the effects of a cane, and changes with weight gain or femoral neck deformities. The document concludes by reviewing the biomechanical principles of total hip replacement.
This document discusses posture and factors that affect it. It defines good posture as optimal muscular balance and efficiency. Posture changes throughout life and with activity. The spine curves allow strength and mobility. Maintaining upright standing, sitting, and lifting postures protects the back, while improper forms can strain muscles and ligaments over time. Small postural sways help prevent fatigue and aid circulation while balancing.
HUMAN POSTURE and it is help full for physiotherapy and neursing students.PPTShubham Kendre
油
The document discusses human posture from several perspectives. It defines posture as the relative arrangement of body parts and notes that it can vary based on activity and over time. A good posture is described as muscular and skeletal balance that protects the body from injury while allowing efficient muscle function. Several factors are described that can influence posture, including mechanical factors like body structure and the line of gravity, as well as psychological and environmental factors. Different types of postures like easy, fatigue, and rigid postures are also outlined. Faulty posture is defined as an asymmetrical strain on the body that can lead to long-term joint and muscle issues if not addressed.
1) The hip joint is a ball and socket joint that connects the femur to the pelvis and allows for flexion, extension, abduction, adduction, and rotation. It is stabilized by strong ligaments and powered by surrounding muscles.
2) Biomechanics examines the forces acting on the hip joint during various activities like walking, running, and standing. The forces are counterbalanced to allow for stability and mobility.
3) Hip disorders are managed by reducing joint reaction forces through decreasing body weight moments, improving abductor function, and redistributing forces through aids like canes or limping.
Postural deviation in different planes.pptxAvaniAkbari
油
Postural deviation refers to any abnormal alignment or positioning of the body's joints and structures while standing, sitting, or moving. These deviations can occur due to a variety of factors, including muscle imbalances, skeletal abnormalities, poor posture habits, injuries, or neurological conditions. Postural deviations can affect people of all ages and can lead to discomfort, pain, reduced mobility, and functional limitations if left unaddressed.
There are several common types of postural deviations:
*Kyphosis: This is an excessive curvature of the upper back, leading to a rounded or hunched posture. It can result from factors such as poor sitting habits, weak back muscles, or structural abnormalities in the spine.
*Lordosis: Lordosis is an exaggerated inward curvature of the lower back, often causing the pelvis to tilt forward and the abdomen to protrude. Factors contributing to lordosis include tight hip flexors, weak abdominal muscles, obesity, or pregnancy.
*Scoliosis: Scoliosis is characterized by an abnormal sideways curvature of the spine, which can cause the shoulders, hips, or waist to appear uneven. It can be congenital or develop during growth spurts in adolescence.
*Forward head posture: This occurs when the head juts forward from its ideal alignment with the spine. It can be caused by prolonged sitting, excessive screen time, weak neck muscles, or carrying heavy backpacks.
*Flat feet: Flat feet, or pes planus, is a condition where the arches of the feet collapse, causing the entire foot to make contact with the ground. This can lead to altered gait patterns and contribute to knee, hip, and back pain.
*Knock knees and bow legs: Knock knees (genu valgum) is when the knees angle inward, while bow legs (genu varum) is when the knees angle outward. These deviations can be due to genetic factors, abnormal bone growth, or muscle imbalances around the knees.
*Uneven shoulders or hips: A noticeable difference in the height or alignment of the shoulders or hips can indicate postural deviations such as scoliosis, muscle imbalances, or leg length discrepancies
This document discusses human posture and provides information on proper and improper posture. It begins by defining posture and listing the components of proper posture using the acronym POSTURE. It then classifies postures as inactive, active static, or active dynamic. Key points include:
- Proper posture, known as correct posture, distributes weight evenly and keeps joints stable while maintaining upright ribs, retracted shoulders, and ears over shoulders.
- Common faulty postures include lordotic, kyphotic, scoliotic, swayback, and flat back postures, each with different causes and potential sources of pain.
- Maintaining good posture requires strong core muscles as well as flexibility in joints and surrounding tissues. Exercises target
2. Definition
Posture is the attitude assumed by the body
either with support during muscular
inactivity,or by means of the co-ordinated
action of many muscles working to maintain
stability
4. Static and Dynamic
Posture
Static- body and its segments are aligned
and maintained.Egs Sitting, Standing.
Dynamic- body or its segments are
moving.Egs Walking, Running
5. Erect bipedal stance
Advantage: freedom for upper
extremities
Disadv: -increases work of heart
-increase stress on vertebral
col.,pelvis,LE
-reduces stability
-small BOS and high COG
8. Postural Control
It is a persons ability-maintain
stability of body and body segments in
response to forces that disturb the
bodys structural equilibrium
9. Posture control depends on integrity of
CNS,visual, vestibular and musculoskeletal
system
It also depends on information from
receptors located in and around joints
(jt.capsules,tendons and ligaments) and from
the sole of feet
10. Major Goals and Basic
Elements of Control
Major goals:
Control the bodys orientation
Maintain bodys COG over BOS
Stabilize the head vertically- eye gaze is
appropriately oriented
11. -Absent or altered inputs:
In absence of normal gravitational force in
weightless conditions during space flight
Occurs in decreased sensation of LE
-Altered outputs:
Inability of the muscles to respond app. to
signals from the CNS
ms of a person in peripheral nerve damage
12. Muscle synergies
- PERTURBATION is any sudden change in conditions
that displaces the body posture away from equilibrium
Perturbation
sensory mechanical
(altering of visual (displacements- movts of
input) body segments or of entire
body)
13. Postural responses to perturbations caused by
either platform or by pushes or pulls are called
REACTIVE or COMPENSATORY response
These responses are a.k.a SYNERGIES or
STRATEGIES
15. Fixed-support synergies:
patterns of muscle activity in which the
BOS remains fixed during the perturbation
and recovery of equilibrium
stability is regained through movements of
parts of the body but,the feet remain fixed
on BOS
eg:Ankle synergy,Hip synergy
16. Ankle Synergy
Ankle synergy consists of discrete bursts of
muscle activity on either the anterior or
posterior aspects of the body that occur in a
distal-to-proximal pattern in response to
forward and backward movements of the
supporting platform respectively
20. Hip Synergy
Hip synergy consists of discrete bursts
of muscle activity opposite to ankle
pattern in a proximal-distal pattern of
activation
21. Change-in-support Synergies
Includes stepping (forward,backward,
sideways) and grasping (using ones hands to
grasp a bar or other fixed support) in response
to movements of the platform
Maintains stability in the instance of large
perturbation
22. Head Stabilizing Strategies
Proactive strategy: occur in
anticipation of initiation of internally
generated forces
Used in dynamic equilibrium situation
Eg: maintain the head during walking
23. Strategies for maintaining the
vertical stability of head
Head stabilization in space (HSS)
Head stabilization on trunk (HST)
24. HSS : modification of head position in
anticipation of displacements of the bodys
COG
HST : head and trunk move as a single unit
25. Kinetics and Kinematics of
Posture
External forces: Inertia,Gravity and Ground
Reaction Forces(GRFs)
Internal forces: muscle activity,passive
tension in ligaments,tendons,jt. capsules and
other soft tissue structures
26. Inertia
In the erect standing posture the body
undergoes a constant swaying motion called
postural sway or sway envelope
Sway envelope for a normal
individual,standing with 4 b/w the feet
12属 in sagittal plane and 16属 in frontal plane
27. Gravity
Gravitational forces act downward
from the bodys COG
In static erect standing posture,the
LOG must fall within the BOS,which
is typically the space defined by the
two feet
29. Ground Reaction Forces
GRFV is equal in magnitude but opposite in
direction to the gravitational force in erect
standing posture
The point of application of GRFV is at the
bodys centre of pressure(COP)
COP is located in the foot in unilateral
stance and b/w the feet in bilateral standing
postures
32. Optimal or Ideal Posture
-An ideal posture is one in which the body
segments are aligned vertically and LOG passes
through all the jt. axes
-Normal body structures makes it impossible to
achieve,but is possible to attain a posture,close
to ideal one
33. -In normal standing posture,the LOG falls
close to,but not through most jt. axes
-Compressive forces are distributed over the
weight bearing surfaces of jts; no excessive
tension exerted on ligamentous or required
muscles
34. Analysis of Posture
Skilled observational analysis of posture
involves identification of the location of
body segments relative to the LOG
Body segments-either side of LOG-
symmetrical
35. A plumb line is used to represent the
LOG
Postural analysis may be performed
using; radiography,photography,EMG,
electrogoniometry,force plates, 3-
dimensional computer analysis
47. Lateral view- Deviations from optimal
alignment
Foot and Toes:
-Claw toe
-Hammer toe
Knee:
-Flexed Knee Posture
-Genu Recurvatum
Pelvis:
-Excessive Anterior Pelvic Tilt
49. Claw Toes
Deformity of toes- hyperextension of MTP jt., flexion
of PIP and DIP jt.s
Callus- dorsal aspect of flexed phalanges
Affects all toes (2nd through 5th)
61. Lordosis
It refers to an abnormal increase in the
normal anterior convexities of either
the cervical or lumbar regions of the
vertebral column
66. Kyphosis
It refers to an abnormal increase in the
normal posterior convexity of the thoracic
vertebral column
70. Gibbus
a.k.a Hump Back is a deformity that may
occur as result of TB
It forms a sharp posterior angulation in the
upper thoracic region of vertebral column
72. Dowagers Hump
Found in post-menopausal women with
osteoporosis
Anterior aspect of bodies of series of
vertebra collapse due to osteoporotic
weakening and therefore, increase in post.
convexity of thoracic area
81. Optimal alignment-Anterior aspect
Body segments
Head
Chest
Abdomen/hips
Hips/pelvis
Knees
Ankles/feet
LOG location
Middle of forehead,nose,chin
Middle of xyphoid process
Through umbilicus
Line equidistant from rt and lt
ASIS and through symphysis pubis
Equidistant from medial femoral
condyles
Equidistant from the medial
malleoli
82. Optimal alignment-Posterior aspect
Head
Shoulders/spine
Hips/pelvis
Knees
Ankles/feet
Middle of head
Along vertebral column in a
straight line,which should bisect
the back into two symmetrical
halves
Through gluteal cleft of buttocks
and equidistant from PSIS
Equidistant from medial jt. aspects
Equidistant from medial malleoli
83. Anterior-posterior View Deviations from
the optimal alignment
Foot and Toes: -Pes planus
-Pes cavus
-Hallux valgus
Knees: -Genu valgum
-Genu varum
-Squinting or cross-eyed patella
-Grasshopper eyes patella
Vertebral column: -Scoliosis
84. Pes Planus(flat foot)
It is characterized by reduced or absent arch,which
may be either rigid or flexible
Talar head-displaced-ant.,med.,inf. and causes
depression of navicular bone and lenghthening of
tibialis post. muscle
Navicular lies below the Feiss line and may even
rest on the floor in severe conditions
85. Rigid flat foot: it is a structural
deformity where the medial longitudinal
arch of foot is absent in NWB,WB and
toe standing
Flexible flat foot: the arch is reduced
during normal wt. bearing,but reappears
during toe standing and non wt. bearing
87. Pes Cavus
The medial longitudinal arch of foot may be
unusually high
A high arch is called pes cavus
It is a more stable position of foot than pes
planus,Wt. borne-lat. borders of foot
Lateral lig. and peroneus longus muscle
stretched
89. Hallux Valgus
It is a very fairly common deformity- medial deviation
of the first metatarsal at tarsometatarsal jt. and lateral
deviation of phalanges at MTP jt.
Bursa on the medial aspect of first MTP head may be
inflammed- Bunion
91. Genu Valgum (knock knee)
In genu valgum,mechanical axes of LE are displaced lat.
and patella may be displaced lat.
If genu valgum exceeds 30属 and persists beyond 8yrs of
age structural changes occur
Medial knee jt. structures abnormal tensile or
distraction stress
Lateral knee jt. Structures abnormal compressive
stress
93. Genu varum (bow legs)
Knees are widely seperated when the feet are
together
Cortical thickening on medial concavity on femur
and tibia increased compressive force
Patella may be displaced medially
94. Squinting or Cross-Eyed Patella
A.k.a in-facing patella
Tilted/rotated position of patella
Superior medial pole of patella faces medially
Inferior pole faces laterally
Q-angle may be increased
97. Scoliosis
Lateral deviations of a series of vertebrae
from the LOG in one or more regions of the
spine may indicate the presence of lateral
spinal curvature
99. Idiopathic Scoliosis
Lateral flexion moment present
Deviation of vertebrae with rotation
Compression of vertebral body on the side of concavity
of curve
Therfore,inhibition of growth of vertebral body on that
side
This leads to wedging of vertebra
Shortening of trunk muscle on concavity
Convexity- stretching of muscles,ligaments and joint
capsules
100. Non-structural Scoliosis
A.k.a functional curves
Can be reversed if the cause of curve is
corrected
These curves are a result of correctable
imbalance such as limb length discrepancy
or a muscle spasm