cad workstation
Download as pptx, pdf2 likes891 views
The document discusses the functions and components of a CAD workstation. A CAD workstation must accomplish five key functions: interface with the central processing unit, generate a graphic image for the user, provide a digital description of the graphic image, translate computer commands into operations, and facilitate communication between the user and system. A typical CAD workstation consists of operator input devices and a graphics terminal to accomplish these functions interactively.
1 of 6
Download to read offline
Ad
Recommended
Unit 1-ME8691 & COMPUTER AIDED DESIGN AND MANUFACTURING
Unit 1-ME8691 & COMPUTER AIDED DESIGN AND MANUFACTURINGMohanumar S
油
This document provides an introduction and syllabus for a course on computer aided design and manufacturing (CAD/CAM). It discusses the product design and manufacturing processes, including sequential and concurrent engineering models. It also describes CAD systems and computer graphics technologies used to design products digitally. This includes topics like 2D and 3D coordinate systems, geometric transformations, line drawing algorithms, and viewing transformations. The goal of the course is to introduce students to how computer technologies are used in the product design and manufacturing fields.Tool geometry
Tool geometryPrem Kumar Soni
油
This document describes the key components and geometry of a single point cutting tool. A single point cutting tool has a shank that fits into the tool holder, a face along which chips slide upwards, and two cutting edges - a side cutting edge and an end cutting edge where material is removed. It also has flank surfaces below the cutting edges and a nose or cutting point where the edges intersect. The document outlines the various angles of a single point cutting tool, including the end cutting edge angle, side cutting edge angle, back rake angle, and relief angles, which are important for tool function. Tool shape is specified using a signature that lists the numerical values of these angles and the nose radius.FUNDAMENTALS OF CNC & PART PROGRAMMING - UNIT - 4 CAD&M
FUNDAMENTALS OF CNC & PART PROGRAMMING - UNIT - 4 CAD&MBalamurugan Subburaj
油
1. The document discusses the history and development of CNC (Computer Numerical Control) machines from conventional machines to NC (Numerical Control) machines to CNC machines.
2. It describes the key elements of an NC system including the machine control unit, machine tool, and part program/drawings.
3. The document provides details on different types of CNC machines based on their motion type (point-to-point vs continuous path systems) and explains fixed and floating zero systems.3 numerical control
3 numerical controlshaikusmanshag
油
The document provides an overview of numerical control (NC) and computer numerical control (CNC) machines. It discusses:
1) The historical development of NC from mechanized production equipment to programmable automation using NC, PLCs, and robots.
2) The basic definition and components of an NC machine, including the numerical controller, NC code, and interactions between the operator and machine.
3) The main components of NC machines - the machine control unit, machine tool, and various control units. It also discusses different types of machine control units.
4) Key aspects of NC motion control including point-to-point and continuous path control, open and closed loop systems, and differentNC, CNC & DNC Machine 
NC, CNC & DNC Machine Nilraj Vasandia
油
This document summarizes a presentation given by Nilrajsinh Vasandia on introduction to NC, CNC, and DNC machine tools. The presentation included definitions and components of NC, CNC, and DNC systems. It discussed the differences between NC, CNC, and DNC, covering topics like part program input/storage, program modification, the inclusion of feedback systems, and ability to import CAD files. Motion control systems and programming methods for NC and CNC machines were also outlined.Cad cam input output devices
Cad cam input output devicesJagilam Kumar
油
The document discusses various input and output devices used with CAD/CAM systems. It describes keyboards, mice, joysticks, light pens, scanners, touch screens, microphones, and trackballs as common input devices used to enter data and instructions into the computer. Output devices mentioned include monitors for displaying processed information, printers for printed hard copies, speakers for playing audio, and plotters for high-quality printed outputs like drawings.Mechanics of metal cutting
Mechanics of metal cuttingmanoj18biet
油
The document discusses the mechanics of metal cutting. It covers topics such as cutting models, turning forces, power and energies, tool terminology, cutting geometry, material removal rate, orthogonal and oblique cutting models, turning and facing forces, velocities, cutting forces, the merchant's circle diagram, stresses, power, specific cutting energy, and violations of orthogonal cutting models. It provides the theoretical framework for understanding metal cutting and machining processes.Machining Process
Machining ProcessKunj Soni
油
This document provides an overview of various machining operations including turning, drilling, milling, and others. It defines machining as a material removal process using sharp cutting tools. The main machining operations covered are turning operations on lathes such as facing, contour turning, and threading. Drilling operations like through holes, blind holes, reaming and tapping are also discussed. Milling operations like peripheral milling, face milling, end milling, and contour milling are summarized. The document also briefly covers other operations like shaping, planning, broaching, and sawing. It includes diagrams to illustrate the different operations.Laminated object manufacturing
Laminated object manufacturingAnkit Raghuwanshi
油
The document discusses Laminated Object Manufacturing (LOM), a type of solid rapid prototyping that uses lasers to create 3D models from layered materials. The LOM process involves adding and subtracting layers of material such as paper or plastic to build a part. Each thin layer is cut to shape using a CO2 laser before the next layer is added. LOM can produce models and prototypes quickly and cheaply from a variety of materials and is used to make scaled models, patterns for casting, and 3D printed objects for home use. However, LOM also has disadvantages like using unstable paper and producing smoke during cutting.Numerical control machines tool
Numerical control machines tooljntuhcej
油
1. Numerical control (NC) systems were developed to automate machine tools using programmed sequences of instructions to control machine motions and functions.
2. NC systems use a machine control unit to read numerical input from a program and translate it into mechanical motions of the machine tool.
3. Modern computer numerical control (CNC) systems provide even greater flexibility and precision by using computers to generate and process NC programs and control machine tools.DNC SYSTEMS
DNC SYSTEMSElson Paul
油
Elson Paul V's thesis discusses direct numerical control (DNC) systems. A DNC system connects multiple machine tools to a central computer in real-time. The computer stores NC part programs and transmits them to machines on demand over telecommunication lines. This allows programs to be edited centrally and eliminates tape readers. DNC systems provide advantages like convenient program storage, reporting, and editing compared to conventional NC systems.Numeric control
Numeric controlKANA RAM MEENA
油
The document summarizes the history and development of numerical control, including its evolution from mechanized machining in the 15th century to computerized numerical control (CNC) in the 20th century. It describes the basic components and functions of NC machines, including the machine control unit, machine tool, control loops unit, and data processing unit. It also discusses the different types of numerical control systems such as conventional NC, direct NC, and computer NC.Rapid prototyping and tooling
Rapid prototyping and toolingThulasikanth Vaddi
油
Rapid prototyping and tooling techniques allow for the quick fabrication of prototypes and tools with minimal lead time based on CAD models. Stereolithography is one of the earliest techniques and works by curing liquid photopolymer resin layer-by-layer with a laser. Multijet modeling is similar but uses inkjet print heads to deposit photopolymer layers. Selective laser sintering works by using a laser to sinter powder materials layer-by-layer. Fused deposition modeling extrudes thermoplastic filaments layer-by-layer. Together these additive techniques provide fast and flexible options for prototyping and manufacturing.COMPUTER AIDED PROCESS PLANNING (CAPP)
COMPUTER AIDED PROCESS PLANNING (CAPP)KRUNAL RAVAL
油
Computer-aided process planning (CAPP) helps determine the processing steps required to make a part after CAP has been used to define what is to be made. CAPP programs develop a process plan or route sheet by following either a variant or a generative approach.
Computer Aided process planning (CAPP)
Computer Aided process planning (CAPP)jntuhcej
油
Computer-Aided process planning (CAPP) aims to capture the logic, judgements, and experience required for process planning and incorporate them into computer programs that can automatically generate manufacturing operation sequences. There are three main approaches to CAPP: retrieval systems that retrieve standardized process plans, generative systems that create plans through decision logic and algorithms, and hybrid systems that combine aspects of both. CAPP reduces routine work for manufacturing engineers and aims to standardize and optimize the process planning procedure.Orthogonal & oblique cutting
Orthogonal & oblique cuttingShivam Kumar
油
Metal cutting involves removing unwanted material from a workpiece. In orthogonal cutting, the cutting tool edge is perpendicular to the direction of motion, so chip flow is perpendicular to the cutting edge. In oblique cutting, the cutting tool edge is at an angle to the direction of motion, so chip flow is sideways. Orthogonal cutting results in higher heat concentration, shorter tool life, and poorer surface finish than oblique cutting. Oblique cutting is used for most industrial processes like drilling and milling.Stereolithography latest
Stereolithography latestyuvarajeil
油
Stereolithography (SLA) is an additive manufacturing process that involves building 3D objects layer-by-layer by curing liquid photopolymer resin with a UV laser beam. It traces the cross-section of each layer on the surface of the resin vat, solidifying the pattern. The elevator then lowers and the next layer is traced, adhering to the previous one. This process is repeated until the object is completed. SLA provides high accuracy and good surface finish but may require additional curing and removal of support structures.Broaching
Broachingcpandiv
油
Broaching is a machining process that uses a broach tool to remove material from a workpiece. The broach tool has a series of cutting teeth arranged in a row with each tooth slightly higher than the previous one. The broach is moved linearly through the workpiece, with each successive tooth removing more material. Broaching can produce finished surfaces and tight tolerances with a single pass of the broach tool. It is well-suited for mass production applications due to its high material removal rate and long tool life.Milling cutter
Milling cutterAlbert Candor
油
Milling cutters are cutting tools used to remove material from workpieces in milling machines. They have cutting edges and flutes to remove chips of material. Common milling cutter types include end mills, face mills, and inserted tooth cutters. Milling cutters come in various geometries and are made of materials like high-speed steel or carbide depending on the application. Cutting parameters like spindle speed, feed rate, depth of cut, and surface cutting speed determine how efficiently a milling cutter removes material from a workpiece.Chapter 2 constructional feature of cnc machine
Chapter 2 constructional feature of cnc machineRAHUL THAKER
油
This document discusses the constructional features of CNC machines. It classifies CNC systems according to the type of machine into point-to-point, straight-cut, and continuous path systems. It also categorizes them based on programming method as absolute or incremental, and by control system type as open-loop or closed-loop. Point-to-point systems move in straight lines for operations like drilling. Continuous path systems enable contouring for milling complex profiles. Programming specifies tool movements, and feedback loops help verify final positions match programs. Common machine elements include motors, ball screws, and feedback devices.Unit 3-ME8691 & COMPUTER AIDED DESIGN AND MANUFACTURING
Unit 3-ME8691 & COMPUTER AIDED DESIGN AND MANUFACTURINGMohanumar S
油
This document discusses various CAD standards including:
1. Graphical standards like GKS and OpenGL that define graphics primitives and device independence.
2. Data exchange standards like IGES and STEP that define neutral formats for transferring geometric and non-geometric CAD data between systems.
3. Communication standards like LAN and WAN that define how CAD data is transferred over networks between systems.
The goals of CAD standards are to enable interoperability and portability of CAD data across different software and hardware platforms. They aim to support the complete transfer of product description data.CAD - Unit-1 (Fundamentals of Computer Graphics)
CAD - Unit-1 (Fundamentals of Computer Graphics)Priscilla CPG
油
This document provides an overview of computer-aided design (CAD). It discusses the different types of CAD (2D, 2.5D, and 3D) and how CAD software is used to create and test models. CAD is used in fields like architecture, engineering, and medical design. The document then covers the product design cycle and how CAD/CAM fits within stages like synthesis, analysis, and manufacturing. It also discusses concurrent engineering and the benefits of a collaborative design process. Finally, it explains fundamental CAD concepts like transformations, viewing, clipping algorithms, and the Sutherland-Hodgman area clipping method.FDM FUSED DEPOSITION MODELLING
FDM FUSED DEPOSITION MODELLINGNileshKhona
油
This document provides an overview of fused deposition modeling (FDM) 3D printing technology. It discusses that FDM works by extruding melted thermoplastic through a nozzle to build an object layer by layer. Common materials used are ABS and PLA plastics. FDM printers have advantages of a wide material selection and low cost, but lower accuracy than other technologies. Applications include prototyping, manufacturing tools and end-use parts for industries like automotive, aerospace, medical and more. In conclusion, FDM is well-suited for prototyping and less structurally demanding applications.Flexible manufacturing systems (FMS)
Flexible manufacturing systems (FMS)SERCOD
油
This document discusses flexible manufacturing systems (FMS). It defines FMS as an automated set of numerically controlled machine tools and material handling systems capable of performing a wide range of manufacturing operations with quick tooling and instruction changeovers. The key components of an FMS are described as numerical control machine tools, work holding and tooling, material handling equipment, inspection equipment, and other ancillary systems. FMS provides several types of flexibility including machine, production, mix, product, routing, volume, and expansion flexibility. The document also outlines the physical and control subsystems that make up an FMS.CNC part programming
CNC part programmingjntuhcej
油
CNC machines use computer programs and numeric control to operate machine tools like milling machines and lathes. Key features include automated tool changes and multi-axis movement controlled by motors. CNC programming involves specifying coordinates, feed rates, spindle speeds, and preparatory codes like G-codes for different motions and functions. Programs are debugged to ensure accurate machining based on part designs.INTRODUCTION TO CAD,WORKSTATION & DESIGN PROCESS
INTRODUCTION TO CAD,WORKSTATION & DESIGN PROCESSAbhilash kk
油
CAD/CAM involves the use of computers to assist with design and manufacturing processes. CAD is used for design activities like creation, modification, and optimization of designs. CAM uses computers to plan, manage, and control manufacturing operations. When CAD and CAM are integrated together in a system called CIM, it allows for automation of material handling, robotics, and business/managerial processes. The document discusses CAD fundamentals like interactive computer graphics systems, workstations, design processes, and geometric modeling. It also covers potential benefits of implementing an integrated CAD/CAM system such as improved productivity, reduced costs, and better communication.Tool makers microscope
Tool makers microscopeUrvesh Prajapati
油
The toolmaker's microscope is an optical measuring device that can measure lengths, profiles, angles, and threads up to 1/100th of a millimeter. It works on the principle of projecting a shadow image of the workpiece through an optical system onto a screen with cross lines, allowing measurements to be taken. Key components include a base, measuring head with light source and lenses, and a glass table with scales for measuring movement in the X, Y, and rotational directions. It can be used to accurately measure various mechanical components and perform tasks like thread measurement and angle measurement of tools.GEOMETRIC MODELING
GEOMETRIC MODELINGBalamurugan Subburaj
油
The document discusses geometric modeling techniques used in computer aided design (CAD). It describes three main types of geometric modeling: wireframe, surface, and solid modeling. Wireframe modeling represents an object with lines and curves, surface modeling uses surfaces, and solid modeling provides a complete 3D representation of mass properties. Hermite cubic splines are discussed as an interpolation technique for generating smooth curves through data points with continuous slopes and curvatures. Parametric curve representations are also presented as they allow curves to be easily defined over a range of parameter values.Introduction to CAD/CAM
Introduction to CAD/CAMDINBANDHU SINGH
油
This document provides an introduction to computer-aided design (CAD). It defines CAD and computer-aided manufacturing (CAM) as using computers to aid in design and manufacturing functions. The document outlines the basic product design cycle and how CAD/CAM can be integrated at various stages, including computer-aided drafting, process planning, and computer-controlled manufacturing. It also describes the basic hardware and software components of CAD systems, including how interactive computer graphics are used to aid designers. Finally, it summarizes the general six-phase design process.Summative 1 TLE 7 Creative Technology 3D Modeling summative test quarter 3.pptx
Summative 1 TLE 7 Creative Technology 3D Modeling summative test quarter 3.pptxMaamFerlGshs
油
This document contains a multiple choice quiz about CAD (Computer Aided Design). It tests knowledge about what CAD stands for, its components and tools used by designers. Questions cover related technologies like CAM, ICG and CAE. It also addresses the hardware components of CAD, characteristics and features of CAD packages, and reasons for using CAD.More Related Content
What's hot (20)
Laminated object manufacturing
Laminated object manufacturingAnkit Raghuwanshi
油
The document discusses Laminated Object Manufacturing (LOM), a type of solid rapid prototyping that uses lasers to create 3D models from layered materials. The LOM process involves adding and subtracting layers of material such as paper or plastic to build a part. Each thin layer is cut to shape using a CO2 laser before the next layer is added. LOM can produce models and prototypes quickly and cheaply from a variety of materials and is used to make scaled models, patterns for casting, and 3D printed objects for home use. However, LOM also has disadvantages like using unstable paper and producing smoke during cutting.Numerical control machines tool
Numerical control machines tooljntuhcej
油
1. Numerical control (NC) systems were developed to automate machine tools using programmed sequences of instructions to control machine motions and functions.
2. NC systems use a machine control unit to read numerical input from a program and translate it into mechanical motions of the machine tool.
3. Modern computer numerical control (CNC) systems provide even greater flexibility and precision by using computers to generate and process NC programs and control machine tools.DNC SYSTEMS
DNC SYSTEMSElson Paul
油
Elson Paul V's thesis discusses direct numerical control (DNC) systems. A DNC system connects multiple machine tools to a central computer in real-time. The computer stores NC part programs and transmits them to machines on demand over telecommunication lines. This allows programs to be edited centrally and eliminates tape readers. DNC systems provide advantages like convenient program storage, reporting, and editing compared to conventional NC systems.Numeric control
Numeric controlKANA RAM MEENA
油
The document summarizes the history and development of numerical control, including its evolution from mechanized machining in the 15th century to computerized numerical control (CNC) in the 20th century. It describes the basic components and functions of NC machines, including the machine control unit, machine tool, control loops unit, and data processing unit. It also discusses the different types of numerical control systems such as conventional NC, direct NC, and computer NC.Rapid prototyping and tooling
Rapid prototyping and toolingThulasikanth Vaddi
油
Rapid prototyping and tooling techniques allow for the quick fabrication of prototypes and tools with minimal lead time based on CAD models. Stereolithography is one of the earliest techniques and works by curing liquid photopolymer resin layer-by-layer with a laser. Multijet modeling is similar but uses inkjet print heads to deposit photopolymer layers. Selective laser sintering works by using a laser to sinter powder materials layer-by-layer. Fused deposition modeling extrudes thermoplastic filaments layer-by-layer. Together these additive techniques provide fast and flexible options for prototyping and manufacturing.COMPUTER AIDED PROCESS PLANNING (CAPP)
COMPUTER AIDED PROCESS PLANNING (CAPP)KRUNAL RAVAL
油
Computer-aided process planning (CAPP) helps determine the processing steps required to make a part after CAP has been used to define what is to be made. CAPP programs develop a process plan or route sheet by following either a variant or a generative approach.
Computer Aided process planning (CAPP)
Computer Aided process planning (CAPP)jntuhcej
油
Computer-Aided process planning (CAPP) aims to capture the logic, judgements, and experience required for process planning and incorporate them into computer programs that can automatically generate manufacturing operation sequences. There are three main approaches to CAPP: retrieval systems that retrieve standardized process plans, generative systems that create plans through decision logic and algorithms, and hybrid systems that combine aspects of both. CAPP reduces routine work for manufacturing engineers and aims to standardize and optimize the process planning procedure.Orthogonal & oblique cutting
Orthogonal & oblique cuttingShivam Kumar
油
Metal cutting involves removing unwanted material from a workpiece. In orthogonal cutting, the cutting tool edge is perpendicular to the direction of motion, so chip flow is perpendicular to the cutting edge. In oblique cutting, the cutting tool edge is at an angle to the direction of motion, so chip flow is sideways. Orthogonal cutting results in higher heat concentration, shorter tool life, and poorer surface finish than oblique cutting. Oblique cutting is used for most industrial processes like drilling and milling.Stereolithography latest
Stereolithography latestyuvarajeil
油
Stereolithography (SLA) is an additive manufacturing process that involves building 3D objects layer-by-layer by curing liquid photopolymer resin with a UV laser beam. It traces the cross-section of each layer on the surface of the resin vat, solidifying the pattern. The elevator then lowers and the next layer is traced, adhering to the previous one. This process is repeated until the object is completed. SLA provides high accuracy and good surface finish but may require additional curing and removal of support structures.Broaching
Broachingcpandiv
油
Broaching is a machining process that uses a broach tool to remove material from a workpiece. The broach tool has a series of cutting teeth arranged in a row with each tooth slightly higher than the previous one. The broach is moved linearly through the workpiece, with each successive tooth removing more material. Broaching can produce finished surfaces and tight tolerances with a single pass of the broach tool. It is well-suited for mass production applications due to its high material removal rate and long tool life.Milling cutter
Milling cutterAlbert Candor
油
Milling cutters are cutting tools used to remove material from workpieces in milling machines. They have cutting edges and flutes to remove chips of material. Common milling cutter types include end mills, face mills, and inserted tooth cutters. Milling cutters come in various geometries and are made of materials like high-speed steel or carbide depending on the application. Cutting parameters like spindle speed, feed rate, depth of cut, and surface cutting speed determine how efficiently a milling cutter removes material from a workpiece.Chapter 2 constructional feature of cnc machine
Chapter 2 constructional feature of cnc machineRAHUL THAKER
油
This document discusses the constructional features of CNC machines. It classifies CNC systems according to the type of machine into point-to-point, straight-cut, and continuous path systems. It also categorizes them based on programming method as absolute or incremental, and by control system type as open-loop or closed-loop. Point-to-point systems move in straight lines for operations like drilling. Continuous path systems enable contouring for milling complex profiles. Programming specifies tool movements, and feedback loops help verify final positions match programs. Common machine elements include motors, ball screws, and feedback devices.Unit 3-ME8691 & COMPUTER AIDED DESIGN AND MANUFACTURING
Unit 3-ME8691 & COMPUTER AIDED DESIGN AND MANUFACTURINGMohanumar S
油
This document discusses various CAD standards including:
1. Graphical standards like GKS and OpenGL that define graphics primitives and device independence.
2. Data exchange standards like IGES and STEP that define neutral formats for transferring geometric and non-geometric CAD data between systems.
3. Communication standards like LAN and WAN that define how CAD data is transferred over networks between systems.
The goals of CAD standards are to enable interoperability and portability of CAD data across different software and hardware platforms. They aim to support the complete transfer of product description data.CAD - Unit-1 (Fundamentals of Computer Graphics)
CAD - Unit-1 (Fundamentals of Computer Graphics)Priscilla CPG
油
This document provides an overview of computer-aided design (CAD). It discusses the different types of CAD (2D, 2.5D, and 3D) and how CAD software is used to create and test models. CAD is used in fields like architecture, engineering, and medical design. The document then covers the product design cycle and how CAD/CAM fits within stages like synthesis, analysis, and manufacturing. It also discusses concurrent engineering and the benefits of a collaborative design process. Finally, it explains fundamental CAD concepts like transformations, viewing, clipping algorithms, and the Sutherland-Hodgman area clipping method.FDM FUSED DEPOSITION MODELLING
FDM FUSED DEPOSITION MODELLINGNileshKhona
油
This document provides an overview of fused deposition modeling (FDM) 3D printing technology. It discusses that FDM works by extruding melted thermoplastic through a nozzle to build an object layer by layer. Common materials used are ABS and PLA plastics. FDM printers have advantages of a wide material selection and low cost, but lower accuracy than other technologies. Applications include prototyping, manufacturing tools and end-use parts for industries like automotive, aerospace, medical and more. In conclusion, FDM is well-suited for prototyping and less structurally demanding applications.Flexible manufacturing systems (FMS)
Flexible manufacturing systems (FMS)SERCOD
油
This document discusses flexible manufacturing systems (FMS). It defines FMS as an automated set of numerically controlled machine tools and material handling systems capable of performing a wide range of manufacturing operations with quick tooling and instruction changeovers. The key components of an FMS are described as numerical control machine tools, work holding and tooling, material handling equipment, inspection equipment, and other ancillary systems. FMS provides several types of flexibility including machine, production, mix, product, routing, volume, and expansion flexibility. The document also outlines the physical and control subsystems that make up an FMS.CNC part programming
CNC part programmingjntuhcej
油
CNC machines use computer programs and numeric control to operate machine tools like milling machines and lathes. Key features include automated tool changes and multi-axis movement controlled by motors. CNC programming involves specifying coordinates, feed rates, spindle speeds, and preparatory codes like G-codes for different motions and functions. Programs are debugged to ensure accurate machining based on part designs.INTRODUCTION TO CAD,WORKSTATION & DESIGN PROCESS
INTRODUCTION TO CAD,WORKSTATION & DESIGN PROCESSAbhilash kk
油
CAD/CAM involves the use of computers to assist with design and manufacturing processes. CAD is used for design activities like creation, modification, and optimization of designs. CAM uses computers to plan, manage, and control manufacturing operations. When CAD and CAM are integrated together in a system called CIM, it allows for automation of material handling, robotics, and business/managerial processes. The document discusses CAD fundamentals like interactive computer graphics systems, workstations, design processes, and geometric modeling. It also covers potential benefits of implementing an integrated CAD/CAM system such as improved productivity, reduced costs, and better communication.Tool makers microscope
Tool makers microscopeUrvesh Prajapati
油
The toolmaker's microscope is an optical measuring device that can measure lengths, profiles, angles, and threads up to 1/100th of a millimeter. It works on the principle of projecting a shadow image of the workpiece through an optical system onto a screen with cross lines, allowing measurements to be taken. Key components include a base, measuring head with light source and lenses, and a glass table with scales for measuring movement in the X, Y, and rotational directions. It can be used to accurately measure various mechanical components and perform tasks like thread measurement and angle measurement of tools.GEOMETRIC MODELING
GEOMETRIC MODELINGBalamurugan Subburaj
油
The document discusses geometric modeling techniques used in computer aided design (CAD). It describes three main types of geometric modeling: wireframe, surface, and solid modeling. Wireframe modeling represents an object with lines and curves, surface modeling uses surfaces, and solid modeling provides a complete 3D representation of mass properties. Hermite cubic splines are discussed as an interpolation technique for generating smooth curves through data points with continuous slopes and curvatures. Parametric curve representations are also presented as they allow curves to be easily defined over a range of parameter values.Similar to cad workstation (10)
Introduction to CAD/CAM
Introduction to CAD/CAMDINBANDHU SINGH
油
This document provides an introduction to computer-aided design (CAD). It defines CAD and computer-aided manufacturing (CAM) as using computers to aid in design and manufacturing functions. The document outlines the basic product design cycle and how CAD/CAM can be integrated at various stages, including computer-aided drafting, process planning, and computer-controlled manufacturing. It also describes the basic hardware and software components of CAD systems, including how interactive computer graphics are used to aid designers. Finally, it summarizes the general six-phase design process.Summative 1 TLE 7 Creative Technology 3D Modeling summative test quarter 3.pptx
Summative 1 TLE 7 Creative Technology 3D Modeling summative test quarter 3.pptxMaamFerlGshs
油
This document contains a multiple choice quiz about CAD (Computer Aided Design). It tests knowledge about what CAD stands for, its components and tools used by designers. Questions cover related technologies like CAM, ICG and CAE. It also addresses the hardware components of CAD, characteristics and features of CAD packages, and reasons for using CAD.CAD & CAM introduction
CAD & CAM introductionJamshid khan
油
This document provides an overview of a course on CAD/CAM. It is a two credit hour course taught by Engr. M Irfan Khan at CECOS University. The course covers fundamentals of CAD including hardware, computer graphics, software, and finite element analysis. It also covers CAM topics like numerical control, part programming, and computer controls in NC. Students will be evaluated based on assignments, quizzes, sessional tests, and a final exam. The document provides definitions of key terms and outlines the basic design process and components of a CAD system. It explains how CAD assists product designers throughout the design process.Introduction to Coputer Aided Manufacturing
Introduction to Coputer Aided Manufacturingsachinmaheshwara
油
Introduction to Coputer Aided ManufacturingComputer Technology Question Answer Fundamental MCQ
Computer Technology Question Answer Fundamental MCQSONU HEETSON
油
Computer Technology Question answer. Latest fundamental of information technology, computer science and current trends related basic to advanced MCQ question answer PDF. Objective Questions and answers, latest important multiple choice MCQs for all competitive exams like SSC, RAILWAY, BANK, UPSC, IBPS, CHSL, MP Police etc.Part 1-Introduction to CAD-CAM-CAE.pptx
Part 1-Introduction to CAD-CAM-CAE.pptxKhalil Alhatab
油
This document provides an overview and introduction to CAD/CAM. It defines CAD as using computers to assist in the design process through computer graphics and software packages. CAD involves creating, modifying, analyzing, or optimizing a design on a computer system using hardware and software. CAM is defined as using computers to control machines and processes during manufacturing. The document outlines the basic concepts of CAD/CAM, the role of computers in design and manufacturing, and the design process from recognizing needs to presenting the final design.Cad cam report-final (mechanical workshop)
Cad cam report-final (mechanical workshop)Parthibanraj Selvaraj
油
The document discusses CAD/CAM software and its uses. It describes BobCAD software which offers CADCAM solutions for CNC machining. Autodesk partners with CAM leaders to provide tools that work with AutoCAD and Inventor. CAD consists of design, analysis, and visualization components while CAM involves CAD, networking, and NC programming to manufacture parts without human touch. The document also lists advantages like increased productivity and disadvantages like requiring expensive software and machines.CAD/CAM
CAD/CAMadi000055
油
This document provides an introduction to CAD/CAM systems and their tools and applications. It discusses how CAD/CAM is used for tasks like producing drawings, visualization, engineering analysis, and generating NC programs. CAD tools are defined as the intersection of geometric modeling, computer graphics, and design tools. The benefits of CAD include improved productivity, reduced costs, better design accuracy, and easier customization. Factors to consider when evaluating CAD/CAM systems include hardware, software, modeling capabilities, documentation generation, and supported applications. The document also covers different hardware configurations for CAD and roles of computers in manufacturing.Cad cam
Cad camAjay Singh
油
The document discusses CAD (Computer Aided Design) and CAM (Computer Aided Manufacturing). It explains that CAD is used to design a part which is then used by CAM to generate tool paths for CNC machine tools. Both CAD and CAM functions can be performed by the same or separate systems. CAD designs are exported to CAM systems which assist in all phases of manufacturing. The integration of CAD and CAM automates the process and links product design to manufacturing.Multiple Choice Questions for CAD/CAM
Multiple Choice Questions for CAD/CAMAbhay Gore
油
The document contains 63 multiple choice questions related to CAD/CAM. The questions cover topics such as CAD concepts like geometric modeling techniques, curves and surfaces; CAM concepts like CNC machining processes and G-codes; and other topics such as computer hardware, graphics software and MRP systems. The questions are from past GATE exams on CAD/CAM from 1992 to 2013 and assess fundamental knowledge of key topics in computer-aided design and manufacturing.Ad
Recently uploaded (20)
May 2025: Top 10 Read Articles Advanced Information Technology
May 2025: Top 10 Read Articles Advanced Information Technologyijait
油
International journal of advanced Information technology (IJAIT) is a bi monthly open access peer-reviewed journal, will act as a major forum for the presentation of innovative ideas, approaches, developments, and research projects in the area advanced information technology applications and services. It will also serve to facilitate the exchange of information between researchers and industry professionals to discuss the latest issues and advancement in the area of advanced IT. Core areas of advanced IT and multi-disciplinary and its applications will be covered during the conferences.Strength of materials (Thermal stress and strain relationships)
Strength of materials (Thermal stress and strain relationships)pelumiadigun2006
油
Understand thermal stress and strain relationships in normal objects and composite bodiesResearch_Sensitization_&_Innovative_Project_Development.pptx
Research_Sensitization_&_Innovative_Project_Development.pptxniranjancse
油
This presentation highlights project development using software development life cycle (SDLC) with a major focus on incorporating research in the design phase to develop innovative solution. Some case-studies are also highlighted which makes the reader to understand the different phases with practical examples.
ACEP Magazine Fifth Edition on 5june2025
ACEP Magazine Fifth Edition on 5june2025Rahul
油
This document provides information about the Fifth edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
May 2025 - Top 10 Read Articles in Artificial Intelligence and Applications (...
May 2025 - Top 10 Read Articles in Artificial Intelligence and Applications (...gerogepatton
油
The International Journal of Artificial Intelligence & Applications (IJAIA) is a bi monthly open access peer-reviewed journal that publishes articles which contribute new results in all areas of the Artificial Intelligence & Applications (IJAIA). It is an international journal intended for professionals and researchers in all fields of AI for researchers, programmers, and software and hardware manufacturers. The journal also aims to publish new attempts in the form of special issues on emerging areas in Artificial Intelligence and applications.Numerical Investigation of the Aerodynamic Characteristics for a Darrieus H-t...
Numerical Investigation of the Aerodynamic Characteristics for a Darrieus H-t...Mohamed905031
油
Numerical Investigation of the Aerodynamic Characteristics for a Darrieus H-type Vertical Axis Wind Turbine (VAWT) using CFD MethodSoftware Engineering Project Presentation Tanisha Tasnuva
Software Engineering Project Presentation Tanisha Tasnuvatanishatasnuva76
油
Software Engineering Presentation.First Review PPT gfinal gyft ftu liu yrfut go
First Review PPT gfinal gyft ftu liu yrfut goSowndarya6
油
CyberShieldX provides end-to-end security solutions, including vulnerability assessment, penetration testing, and real-time threat detection for business websites. It ensures that organizations can identify and mitigate security risks before exploitation.
Unlike traditional security tools, CyberShieldX integrates AI models to automate vulnerability detection, minimize false positives, and enhance threat intelligence. This reduces manual effort and improves security accuracy.
Many small and medium businesses lack dedicated cybersecurity teams. CyberShieldX provides an easy-to-use platform with AI-powered insights to assist non-experts in securing their websites.
Traditional enterprise security solutions are often expensive. CyberShieldX, as a SaaS platform, offers cost-effective security solutions with flexible pricing for businesses of all sizes.
Businesses must comply with security regulations, and failure to do so can result in fines or data breaches. CyberShieldX helps organizations meet compliance requirements efficiently.
Pruebas y Solucion de problemas empresariales en redes de Fibra Optica
Pruebas y Solucion de problemas empresariales en redes de Fibra OpticaOmarAlfredoDelCastil
油
FLUKE
Pruebas y Solucion de problemas
empresariales en redes de Fibra OpticaA Comprehensive Investigation into the Accuracy of Soft Computing Tools for D...
A Comprehensive Investigation into the Accuracy of Soft Computing Tools for D...Journal of Soft Computing in Civil Engineering
油
This study will provide the audience with an understanding of the capabilities of soft tools such as Artificial Neural Networks (ANN), Support Vector Regression (SVR), Model Trees (MT), and Multi-Gene Genetic Programming (MGGP) as a statistical downscaling tool. Many projects are underway around the world to downscale the data from Global Climate Models (GCM). The majority of the statistical tools have a lengthy downscaling pipeline to follow. To improve its accuracy, the GCM data is re-gridded according to the grid points of the observed data, standardized, and, sometimes, bias-removal is required. The current work suggests that future precipitation can be predicted by using precipitation data from the nearest four grid points as input to soft tools and observed precipitation as output. This research aims to estimate precipitation trends in the near future (2021-2050), using 5 GCMs, for Pune, in the state of Maharashtra, India. The findings indicate that each one of the soft tools can model the precipitation with excellent accuracy as compared to the traditional method of Distribution Based Scaling (DBS). The results show that ANN models appear to give the best results, followed by MT, then MGGP, and finally SVR. This work is one of a kind in that it provides insights into the changing monsoon season in Pune. The anticipated average precipitation levels depict a rise of 300500% in January, along with increases of 200-300% in February and March, and a 100-150% increase for April and December. In contrast, rainfall appears to be decreasing by 20-30% between June and September.Presentacion Tomograf鱈a Axial Computarizada
Presentacion Tomograf鱈a Axial ComputarizadaJuliana Ovalle Jim辿nez
油
En esta presentaci坦n se encuentra la explicaci坦n sobre la tomograf鱈a Axial Computarizada, se habla sobre su historia, partes, operaci坦n general y especifica del equipo, tipos de densidades y sus aplicaciones m叩s comunes y las innovadoras.
Structural Design for Residential-to-Restaurant Conversion
Structural Design for Residential-to-Restaurant ConversionDanielRoman285499
油
Overview of a 4-month project working on designing the structural components of a residential building to meet new code
Introduction to AI agent development with MCP
Introduction to AI agent development with MCPDori Waldman
油
Introduction to AI development
with MCP and AI2AI 
Electrical and Electronics Engineering: An International Journal (ELELIJ)
Electrical and Electronics Engineering: An International Journal (ELELIJ)elelijjournal653
油
Call For Papers...!!!
Electrical and Electronics Engineering: An International Journal (ELELIJ)
Web page link: https://wireilla.com/engg/eeeij/index.html
Submission Deadline: June 08, 2025
Submission link: elelijjournal@wireilla.com
Contact Us: wirelinux@wireilla.org
IOt Based Research on Challenges and Future
IOt Based Research on Challenges and FutureSACHINSAHU821405
油
IOt Based Research on Challenges and Future A Comprehensive Investigation into the Accuracy of Soft Computing Tools for D...
A Comprehensive Investigation into the Accuracy of Soft Computing Tools for D...Journal of Soft Computing in Civil Engineering
油
Ad
cad workstation
- 1. CAD/CAM TOPIC: CAD WORKSTATION By J KUMAR CHANDRA, ASST. PROF., DEPARTMENT OF ME, NNRG-HYDERABAD
- 2. CAD WORKSTATION (DESIGN WORKSTATION ) The CAD workstation is the system interface with the outside world. It represents a significant factor in determining how convenient and efficient it is for a designer to use the CAD system. The workstation must accomplish five functions
- 3. WORKSTATION FUNCTIONS l. It must interface with the central processing unit. 2. It must generate a steady graphic image for the user. 3. It must provide digital descriptions of the graphic image. 4. It must translate computer commands into operating functions. 5. It must facilitate communication between the user and the system
- 4. The use of interactive graphics has been found to be the best approach to accomplish these functions. A typical interactive graphics workstation would consist of the following hardware Components: Operator input devices A graphics terminal