The document provides installation instructions and specifications for capacitors, including that a minimum 50mm gap is required between capacitors, the air temperature must not exceed 65 degrees Celsius, and the bottom of copper bars should be at least 180mm above capacitor terminals to avoid magnetic interference. It also lists technical parameters for the capacitors such as voltage, frequency, amps, weight, and individual kvar and MFD specifications for 5 capacitors along with an internal wiring diagram and date.
1 of 1
Download to read offline
More Related Content
Capacitor Cabinet-RAM 2.1-3600-0.3Y.pdf
1. 2100 300
433
1714
3600
Special Note:
1. When installing and using, the minimum gap between capacitors
should not be less than 50mm;
2. The air temperature around the capacitor is not more than
3. The adverse effect of external current magnetic field on the
capacitor should be avoided. It is recommended that the minimum
distance between the bottom edge of the main copper bar and the
top of the capacitor terminal is not less than 180mm.
720
1 2 3 4
M16
73
0
5
50
230
4
3
2
0
0
0
65
65
65
1 2 3 4 5
5
0
1
0
175
65
86.6 86.6 86.6 86.6 86.6
720 720 720 720
(1).Internal wiring diagram:
(2).technical parameter:
kvar
TAP
MFD(uf)
VOLTS(V) FREQ(Hz) AMPS(A)
Total
Weight
2021.5.21
Hangzhou TianHe Power capacitor
limited company
Outline drawing of
capacitor
Date
