This document provides product data and specifications for Colbond's CX1000 geocomposite for vertical drainage. The CX1000 has a flow capacity of 140 ml/s under specified conditions, a tensile strength of 2.5 kN, and an elongation of 3.0% at 1.0 kN. It has a thickness of 4 mm, weight of 80 g/lm, and is supplied in rolls that are 0.1 m wide, 280 m long, with a pack diameter of 1.16 m and length of 1.0 m, weighing 245 kg.
1 of 1
Download to read offline
More Related Content
Cdr 001 colbonddrain cx1000-gb-a[1]
1. ?
Colbonddrain
Geocomposite for vertical drainage
PRODUCT DATA
Properties
Type CX1000
Polymer PE/PP
Hydraulic properties geocomposite [1]
Flow capacity qw (350 kPa, i = 0.1) EN ISO 12958 ml/s 140
Mechanical properties geocomposite
Tensile strength MD EN ISO 10319 kN 2.5
Elongation at 1.0 kN EN ISO 10319 % 3.0
Hydraulic properties fleece
Water permeability, VIH50 EN ISO 11058 mm/s 70
Opening size EN ISO 12956 ?m 75
Dimensions
Roll
Thickness mm 4
Weight g/lm 80
Width m 0.1
Length m 280
Pack (10 rolls)
Diameter m 1.16
Length m 1.0
Gross weight kg 245
[1]
Flow capacity is tested under foam/foam circumstances.
The information set forth in this data sheet Colbond bv T: +31 26 366 4600
reflects the best knowledge at the time of
publication. The document is subject to change P.O. Box 9600 F: +31 26 366 5812
pursuant to new developments and findings. The 6800 TC Arnhem geosynthetics@colbond.com
same reservation applies to the properties of the The Netherlands www.colbond-geosynthetics.com
products described. No liability is undertaken for
results obtained by usage of the products and www.colbond.com
CDR-001-GB-A-01/2010 information.