Coa pyrolysis-oil
•
0 likes•1,044 views
This certificate analyzes the properties of fuel oil manufactured from pyrolysis of waste plastic. It lists 17 tests performed on the sample according to ASTM standards, including density, acidity, API gravity, flash point, kinematic viscosity, carbon content, pour point, sulfur content, and distillation range. The fuel oil had a density of 0.7930 gm/ml, acidity of 0.76 mg KOH/gm, API gravity of 46.67, and flash point below 400°C. Testing was carried out by Intertek in Mumbai.
Coa pyrolysis-oil
- 1. Sanjivani Phytopharma Pvt. Ltd. Machinery Fabrication > Turnkey Installation & Commissioning > Industrial Production Certificate of analysis: Fuel oil Sample tested: Fuel oil manufactured from pyrolysis of Waste Plastic. Sr. No. Test Method Of Testing Result 0 1 Density at @15 C ASTM D 4052:2002 0.7930 gm/ml 2 Acidity (mg KOH/gm) ASTM D 974:2002 0.76 3 API Gravity @ 600 F ASTM D 1298:1999 46.67 4 Flash Point COC ASTM D 92-05a <400 C 5 Kinematic viscosity @ 400 C ASTM D 445:2005 2.149 mm2/s 6 Colour ASTM D 1500:2004a D8 7 Conradson Carbon residue ASTM D 189:2005 0.010% (wt) 8 Asphaltine content ASTM D 3279:2001 0.21% (wt) 9 Ash Content ASTM D 482:2003 < 0.01% (wt) 10 Calculated carbon aromatic ISO 8217 :1996 763.4 index 11 Pour Point ASTM D 97-05a - 40 C 12 Sediment by extraction ASTM D 473:2002 0.012 (wt) 13 Specific gravity @ 150 C ASTM D 4052:2002 0.7932 14 Sulphur content ASTM D 4094:2003 75 ppm 15 Water by distillation ASTM D 95-05el < 0.05% (vol) 16 Colorific value ASTM D 240 cal/g 10000 17 Distillation range ASTM D 86:04 b Initial boiling point 71.00 C 05% Recovery 110.00 C 10% Recovery 141.00 C 20% Recovery 185.00 C 30% Recovery 226.00 C 40% Recovery 261.00 C 50% Recovery 291.00 C 60% Recovery 319.00 C 70% Recovery 343.00 C 80% Recovery 365.00 C 85% Recovery 380.00 C 90% Recovery 390.00 C Total Recovery 90% (vol) Testing carried out at: Intertek, Mumbai Reg Office: 307, Prabhat Center (Annex), Sector 1A, C.B.D. Belapur, Navi Mumbai, Maharashtra State, India. PIN: 400 614. Phone: 022-3299 0790. Fax: 022-2757 2832 / 2757 4535 Email: sanjivaniherbals@gmail.com, Visit us: www.sanjivaniherbals.com. Page 1 of 2
- 2. Sanjivani Phytopharma Pvt. Ltd. Machinery Fabrication > Turnkey Installation & Commissioning > Industrial Production Certificate of analysis: Fuel oil Sample tested: Fuel oil manufactured from pyrolysis of Waste Tyre. Reg Office: 307, Prabhat Center (Annex), Sector 1A, C.B.D. Belapur, Navi Mumbai, Maharashtra State, India. PIN: 400 614. Phone: 022-3299 0790. Fax: 022-2757 2832 / 2757 4535 Email: sanjivaniherbals@gmail.com, Visit us: www.sanjivaniherbals.com. Page 2 of 2