ºÝºÝߣ

ºÝºÝߣShare a Scribd company logo

Computer Networks 2

•
•
Mr Smith
Mr Smith

The document describes the hardware needed to connect standalone computers into a local area network. It discusses network adapters, hubs, switches, and wireless access points. It explains the roles of computers in client-server and peer-to-peer networks. It also defines the ring, bus, and star network topologies.

1 of 13
© GCSE Computing Candidates should be able to:  describe the hardware needed to connect stand-alone computers into a local area network, including hub/switches, wireless access points  explain the different roles of computers in a client-server and a peer- to-peer network  describe, using diagrams or otherwise, the ring, bus and star network topologies ºÝºÝߣ 1 GCSE Computing - 1.6 Computer communications and networking (2)
© GCSE Computing  Cabling is needed in a non-wireless network to connect the computers and peripherals together, either directly or through a hub/switch.  The amount of cabling needed depends on the network topology (the way computers and peripherals are physically connected together).  Cabling is usually copper wire or fibre-optic cable. ºÝºÝߣ 2 What hardware is needed to connect stand- alone computers into a local area network?  A network adapter such as a network interface card (NIC) is needed to connect computers and other peripherals to a network, either by cable or wirelessly. Each connected device is allocated an IP address to uniquely identify it on a TCP/IP network.
© GCSE Computing  A switch is used in the same way as a hub but the data entering the device is switched to the port it is meant to go to, rather than being broadcast to all the ports. This greatly reduces data packet collisions resulting in a faster network than the equivalent one using a hub.  A wireless access point is a device that allows computers and printers etc. to connect to a wired network using radio waves rather than cabling, provided they are equipped with a wireless NIC. This allows a network to built with few or no cables and makes it simple to add further wireless devices. ºÝºÝߣ 3 What hardware is needed to connect stand- alone computers into a local area network?  A hub is used to link computers and peripherals together in a cabled network that uses a star network topology.  It is a sort of junction box but does not manage any of the traffic that comes through it, any data packet entering any port is broadcast out to all the other ports resulting in data packet collisions which slow the network considerably as data traffic rises.
© GCSE Computing ºÝºÝߣ 4  Most LAN networks use cables to connect the computers.  Twisted-pair cables are the most common and is often called Ethernet cabling. Category 5 (Cat5) twisted-pair cables can carry 100Mb per second over distances of up to 100 metres.  Coaxial cable is better at resisting electrical interference so it can be installed over longer lengths, but it is not as flexible.  Fibre optic cable has a central glass core and transmits signals using light at extremely high speeds over huge distances. It can be used outside buildings but it is significantly more expensive to purchase and install. What hardware is needed to connect stand- alone computers into a local area network?
© GCSE Computing  On a client-server network there are two types of computers with two distinct roles. One or more server computers have the role of controlling access to shared resources like files and printers. Multiple client computers are then connected to the server computers and these are where the user works.  The user typically logs onto a client computer which then connects to the server, verifies the user and then allows them access to the files and software stored on the server that they have permission to access.  All the data is stored on the servers, which generally have far greater security controls than the client computers. Since data storage is centralised, security is easier to manage, updates to the data are far easier to administer and it is far easier to backup the data centrally.  Some servers may have a more specialised role such as a print server, dedicated to controlling access to shared printers on the network and queuing print jobs in the order that they were sent by the users. ºÝºÝߣ 5 What are the roles of the computers in client- server network?
© GCSE Computing  In a peer-to-peer network computers are simply linked together, either using cables and a hub or wirelessly.  Such networks do not have computers with particular roles, instead, each computer can simultaneously act as both a client and a server, and each has equivalent responsibilities and status.  This means that any computer on the network can load information from the hard disk of any other computer and a computer on the network can use any printer connected to any other computer.  A peer-to-peer network will be cheaper to set up and, provided there are only a small number of computers, will be easier to manage than server based networks.  However they are less secure and peer-to-peer networks are used mainly by home users and small companies who do not have the necessary technical staff to maintain a client-server network. ºÝºÝߣ 6 What are the roles of the computers in peer-to- peer network?
© GCSE Computing  A network topology is the name given to the way in which devices (called nodes) are physically connected in a network. There are three common network topologies: ring; line (bus) and star.  These devices may include:  Servers  Client computers  Printers  Routers  Hubs/switches  Other peripherals that can be networked i.e. cameras ºÝºÝߣ 7 What is a network topology?
© GCSE Computing  Typically a peer-to-peer network. The nodes are connected in a ring and data travels in one direction using a control signal called a 'token'.  Advantages:  Not greatly affected by adding further nodes or heavy network traffic as only the node with the 'token' can transmit data so there are no data collisions.  Relatively cheap to install and expand.  Disadvantages:  Slower than a star topology under normal load.  If the cable fails anywhere in the ring or any node fails then the whole network will fail because the token cannot be passed around the ring.  This is the hardest topology to troubleshoot because of the difficulty of tracking down where in the ring the failure has occurred.  It is inconvenient to modify or expand because to add or remove a node means the network has to be shut down temporarily.  The special network interface cards needed to connect printers and computers are expensive. ºÝºÝߣ 8 What is a Ring Topology?
© GCSE Computing ºÝºÝߣ 9 What is a Ring Topology?
© GCSE Computing  Typically a peer-to-peer network. Nodes are connected to a main (bus) cable. If data is being sent between nodes then the other nodes cannot transmit..  Advantages:  The simplest and cheapest to install and extend.  Well suited for temporary networks with not many nodes.  Very flexible as nodes can be attached or detached using special T-connectors without disturbing the rest of the network.  Failure of one node does not affect the rest of the bus network.  Simpler than a ring topology to troubleshoot if there is a cable failure because sections can be isolated and tested independently.  Disadvantages:  If the bus cable fails then the whole network will fail.  Performance of the network slows down rapidly if too many nodes are connected then the transfer of data slows dramatically as the nodes have to wait longer for the bus to be clear with more nodes or heavy network traffic.  The bus cable has a limited length and must have a terminator fitted at each end to prevent reflected signals.  Slower than a ring network as data cannot be transmitted while the bus is in use by other nodes. ºÝºÝߣ 10 What is a Bus (line) topology?
© GCSE Computing ºÝºÝߣ 11 What is a Bus (line) topology?
© GCSE Computing  Typically a client-server network. A central computer (server) usually forms the main node and the subsidiary nodes are connected to it and to each other through a switch or hub.  Advantages:  The most reliable because the failure of a node or a node cable does not affect other nodes.  Simple to troubleshoot because only one node is affected by a cable break between the switch and the node.  Adding further nodes does not greatly affect performance because the data does not pass through unnecessary nodes.  Easily upgraded by replacing a hub with a switch. Easy to expand with extra nodes.  Disadvantages:  Uses the most cable which makes it more expensive to install than the other two topologies.  The extra hardware required such as hubs or switches further increases the cost.  As the central computer controls the whole system, the whole system will be affected if it breaks down or if the cable link between it and the switch fails. If the switch, the link to the server or the server itself fails then the whole network fails. ºÝºÝߣ 12 What is a Star topology?
© GCSE Computing ºÝºÝߣ 13 What is a Star topology?

More Related Content

Computer Networks 2

  • 1. © GCSE Computing Candidates should be able to:  describe the hardware needed to connect stand-alone computers into a local area network, including hub/switches, wireless access points  explain the different roles of computers in a client-server and a peer- to-peer network  describe, using diagrams or otherwise, the ring, bus and star network topologies ºÝºÝߣ 1 GCSE Computing - 1.6 Computer communications and networking (2)
  • 2. © GCSE Computing  Cabling is needed in a non-wireless network to connect the computers and peripherals together, either directly or through a hub/switch.  The amount of cabling needed depends on the network topology (the way computers and peripherals are physically connected together).  Cabling is usually copper wire or fibre-optic cable. ºÝºÝߣ 2 What hardware is needed to connect stand- alone computers into a local area network?  A network adapter such as a network interface card (NIC) is needed to connect computers and other peripherals to a network, either by cable or wirelessly. Each connected device is allocated an IP address to uniquely identify it on a TCP/IP network.
  • 3. © GCSE Computing  A switch is used in the same way as a hub but the data entering the device is switched to the port it is meant to go to, rather than being broadcast to all the ports. This greatly reduces data packet collisions resulting in a faster network than the equivalent one using a hub.  A wireless access point is a device that allows computers and printers etc. to connect to a wired network using radio waves rather than cabling, provided they are equipped with a wireless NIC. This allows a network to built with few or no cables and makes it simple to add further wireless devices. ºÝºÝߣ 3 What hardware is needed to connect stand- alone computers into a local area network?  A hub is used to link computers and peripherals together in a cabled network that uses a star network topology.  It is a sort of junction box but does not manage any of the traffic that comes through it, any data packet entering any port is broadcast out to all the other ports resulting in data packet collisions which slow the network considerably as data traffic rises.
  • 4. © GCSE Computing ºÝºÝߣ 4  Most LAN networks use cables to connect the computers.  Twisted-pair cables are the most common and is often called Ethernet cabling. Category 5 (Cat5) twisted-pair cables can carry 100Mb per second over distances of up to 100 metres.  Coaxial cable is better at resisting electrical interference so it can be installed over longer lengths, but it is not as flexible.  Fibre optic cable has a central glass core and transmits signals using light at extremely high speeds over huge distances. It can be used outside buildings but it is significantly more expensive to purchase and install. What hardware is needed to connect stand- alone computers into a local area network?
  • 5. © GCSE Computing  On a client-server network there are two types of computers with two distinct roles. One or more server computers have the role of controlling access to shared resources like files and printers. Multiple client computers are then connected to the server computers and these are where the user works.  The user typically logs onto a client computer which then connects to the server, verifies the user and then allows them access to the files and software stored on the server that they have permission to access.  All the data is stored on the servers, which generally have far greater security controls than the client computers. Since data storage is centralised, security is easier to manage, updates to the data are far easier to administer and it is far easier to backup the data centrally.  Some servers may have a more specialised role such as a print server, dedicated to controlling access to shared printers on the network and queuing print jobs in the order that they were sent by the users. ºÝºÝߣ 5 What are the roles of the computers in client- server network?
  • 6. © GCSE Computing  In a peer-to-peer network computers are simply linked together, either using cables and a hub or wirelessly.  Such networks do not have computers with particular roles, instead, each computer can simultaneously act as both a client and a server, and each has equivalent responsibilities and status.  This means that any computer on the network can load information from the hard disk of any other computer and a computer on the network can use any printer connected to any other computer.  A peer-to-peer network will be cheaper to set up and, provided there are only a small number of computers, will be easier to manage than server based networks.  However they are less secure and peer-to-peer networks are used mainly by home users and small companies who do not have the necessary technical staff to maintain a client-server network. ºÝºÝߣ 6 What are the roles of the computers in peer-to- peer network?
  • 7. © GCSE Computing  A network topology is the name given to the way in which devices (called nodes) are physically connected in a network. There are three common network topologies: ring; line (bus) and star.  These devices may include:  Servers  Client computers  Printers  Routers  Hubs/switches  Other peripherals that can be networked i.e. cameras ºÝºÝߣ 7 What is a network topology?
  • 8. © GCSE Computing  Typically a peer-to-peer network. The nodes are connected in a ring and data travels in one direction using a control signal called a 'token'.  Advantages:  Not greatly affected by adding further nodes or heavy network traffic as only the node with the 'token' can transmit data so there are no data collisions.  Relatively cheap to install and expand.  Disadvantages:  Slower than a star topology under normal load.  If the cable fails anywhere in the ring or any node fails then the whole network will fail because the token cannot be passed around the ring.  This is the hardest topology to troubleshoot because of the difficulty of tracking down where in the ring the failure has occurred.  It is inconvenient to modify or expand because to add or remove a node means the network has to be shut down temporarily.  The special network interface cards needed to connect printers and computers are expensive. ºÝºÝߣ 8 What is a Ring Topology?
  • 9. © GCSE Computing ºÝºÝߣ 9 What is a Ring Topology?
  • 10. © GCSE Computing  Typically a peer-to-peer network. Nodes are connected to a main (bus) cable. If data is being sent between nodes then the other nodes cannot transmit..  Advantages:  The simplest and cheapest to install and extend.  Well suited for temporary networks with not many nodes.  Very flexible as nodes can be attached or detached using special T-connectors without disturbing the rest of the network.  Failure of one node does not affect the rest of the bus network.  Simpler than a ring topology to troubleshoot if there is a cable failure because sections can be isolated and tested independently.  Disadvantages:  If the bus cable fails then the whole network will fail.  Performance of the network slows down rapidly if too many nodes are connected then the transfer of data slows dramatically as the nodes have to wait longer for the bus to be clear with more nodes or heavy network traffic.  The bus cable has a limited length and must have a terminator fitted at each end to prevent reflected signals.  Slower than a ring network as data cannot be transmitted while the bus is in use by other nodes. ºÝºÝߣ 10 What is a Bus (line) topology?
  • 11. © GCSE Computing ºÝºÝߣ 11 What is a Bus (line) topology?
  • 12. © GCSE Computing  Typically a client-server network. A central computer (server) usually forms the main node and the subsidiary nodes are connected to it and to each other through a switch or hub.  Advantages:  The most reliable because the failure of a node or a node cable does not affect other nodes.  Simple to troubleshoot because only one node is affected by a cable break between the switch and the node.  Adding further nodes does not greatly affect performance because the data does not pass through unnecessary nodes.  Easily upgraded by replacing a hub with a switch. Easy to expand with extra nodes.  Disadvantages:  Uses the most cable which makes it more expensive to install than the other two topologies.  The extra hardware required such as hubs or switches further increases the cost.  As the central computer controls the whole system, the whole system will be affected if it breaks down or if the cable link between it and the switch fails. If the switch, the link to the server or the server itself fails then the whole network fails. ºÝºÝߣ 12 What is a Star topology?
  • 13. © GCSE Computing ºÝºÝߣ 13 What is a Star topology?