More Related Content
What's hot (20)
Viewers also liked (19)
More from miguelangelperezhenao (20)
Configuracion de los router clase 04 agosto.ppt
- 1. ROUTER 3 Router> Router>en Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#int s0/0/0 Router(config-if)#ip add 200.1.1.1 255.255.255.0 Router(config-if)#no shu Router(config-if)#exit Router(config)#int s0/0/0 Router(config-if)#cloc rate Router(config-if)#cloc rate 64000 Router(config-if)#exit Router(config)#router ei Router(config)#router eigrp 1 Router(config-router)#net Router(config-router)#network 172.16.1.0 Router(config-router)#network 172.16.2.0 Router(config-router)#network 200.1.1.0 Router(config-router)#exit Router(config)#dia Router(config)#dial-peer voice Router(config)#dial-peer voice 1 voip Router(config-dial-peer)#des Router(config-dial-peer)#destination-pattern 9... Router(config-dial-peer)#se Router(config-dial-peer)#session tar
- 2. Router(config-dial-peer)#session target ipv4:99.99.99.97 Router(config-dial-peer)#exit Router(config)#dial-peer voice 2 voip Router(config-dial-peer)#destination-pattern 1... Router(config-dial-peer)#session target ipv4:200.1.1.3 Router(config-dial-peer)#exit Router(config)# ROUTER 2 Router>en Router#conf t Enter configuration commands, one per line. End with CNTL/Z. Router(config)#int s0/0/0 Router(config-if)#ip add 200.1.1.3 255.255.255.0 Router(config-if)#no sh Router(config-if)# %LINK-5-CHANGED: Interface Serial0/0/0, changed state to up Router(config-if)#int s0/0/1 Router(config-if)#ip add 99.99.99.99 255.255.255.0 Router(config-if)#clo Router(config-if)#clock rate 64000 Router(config-if)#no sh %LINK-5-CHANGED: Interface Serial0/0/1, changed state to down Router(config-if)#exit Router(config)#dial Router(config)#dial-peer voice 1 voip Router(config-dial-peer)#de Router(config-dial-peer)#destination-pattern 2...
- 3. Router(config-dial-peer)#session target ipv4:200.1.1.1 Router(config-dial-peer)#exit Router(config)#dial-peer voice 2 voip Router(config-dial-peer)#destination-pattern 9... Router(config-dial-peer)#session target ipv4:99.99.99.97 Router(config-dial-peer)#exit Router(config)# %LINK-5-CHANGED: Interface Serial0/0/1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1, changed state to up Router(config)#router ei Router(config)#router eigrp 1 Router(config-router)#net Router(config-router)#network 192.168.1.0 Router(config-router)#network 192.168.2.0 Router(config-router)#network 99.99.99.0 Router(config-router)#exit Router(config)# %DUAL-5-NBRCHANGE: IP-EIGRP 1: Neighbor 99.99.99.97 (Serial0/0/1) is up: new adjacency Router(config)#router ei Router(config)#router eigrp 1 Router(config-router)#network 200.1.1.1 Router(config-router)# %DUAL-5-NBRCHANGE: IP-EIGRP 1: Neighbor 200.1.1.1 (Serial0/0/0) is up: new adjacency Router(config-router)#network 200.1.1.0 Router(config-router)#
- 4. ROUTER 1 Router(config)# Router(config)#int s 0/0/0 Router(config-if)#ip add 99.99.99.97 255.255.255.0 Router(config-if)#no shu Router(config-if)# %LINK-5-CHANGED: Interface Serial0/0/0, changed state to up Router(config-if)#exit Router(config-dial-peer)#dial-peer voice 1 voip Router(config-dial-peer)#de Router(config-dial-peer)#destination-pattern 1... Router(config-dial-peer)#se Router(config-dial-peer)#session tar Router(config-dial-peer)#session target ipv4:99.99.99.99 Router(config-dial-peer)#exit Router(config)#dial-peer voice 2 voip Router(config-dial-peer)#destination-pattern 2... Router(config-dial-peer)#session target ipv4:200.1.1.1 Router(config-dial-peer)#exit Router(config)#router ei Router(config)#router eigrp 1 Router(config-router)#net Router(config-router)#network 10.1.1.0 Router(config-router)#network 10.1.2.0 Router(config-router)#network 99.99.99.0
- 5. Router(config-router)# %DUAL-5-NBRCHANGE: IP-EIGRP 1: Neighbor 99.99.99.99 (Serial0/0/0) is up: new adjacency Router(config-router)#network 99.99.99.99 Router(config-router)#