ºÝºÝߣ

ºÝºÝߣShare a Scribd company logo

Construction of a boccia chute

•
•
C
Cristina López

The document provides instructions for constructing a boccia chute in 13 steps. It involves marking and cutting plywood and guides, securing them with glue and screws, sanding, adding hinges and brackets, drilling holes, applying slip material to the base, and painting. The necessary materials include plywood, guides, screws, glue, hinges, brackets, and paint while the tools required are a pencil, screwdriver, pliers, sandpaper, saw, drill, and hammer.

1 of 8
Download to read offline
CONSTRUCTION OF A BOCCIA CHUTE. MATERIAL FACILITATOR OF THE ACTION
2 STAGES OF DEVELOPMENT OF A BOCCIA CHUTE The steps for the construction of the chute are: 1. Tick plywood area where they will go the guides using a pencil. Image 1 2. Mark the holes in the plywood, previously measured. Image 2
3 3. Place White glue between the guides and the plywood and secure with locking pliers. Image 3 4. Screw the plywood to guides using the screwdriver. Image 4
4 5. Stand the Wood using sandpaper. Image 5 6. Sawing vertical corner of the timber base to the hinge bases can be used without any problems. Image 6
5 7. Apply reinforcement in the vertical wooden base so that the hinge has a greater range of motion. Such reinforcement is done with the use of a wooden block. Image 7 8. Mark the different heights of the chute. Image 8
6 9. Run drilling them. Image 9 10.Attach the base of the chute with the use of brackets. Image 10
7 11.Place the slip material base to avoid damage and prevent it can slide. 12.Paint the chute. We used green and yellow colours. Image 11 13.Join the parts. Image 12
8 MATERIALES Y HERRAMIENTAS NECESARIOS MATERIAL TOOLS Screws Screwdrivers Plywood Visa Grips Guides Sandpaper Whitetail Brace Pencil Hammer Hinges Subway Squads Saw Drill Cat Wood painting

More Related Content

Construction of a boccia chute

  • 1. CONSTRUCTION OF A BOCCIA CHUTE. MATERIAL FACILITATOR OF THE ACTION
  • 2. 2 STAGES OF DEVELOPMENT OF A BOCCIA CHUTE The steps for the construction of the chute are: 1. Tick plywood area where they will go the guides using a pencil. Image 1 2. Mark the holes in the plywood, previously measured. Image 2
  • 3. 3 3. Place White glue between the guides and the plywood and secure with locking pliers. Image 3 4. Screw the plywood to guides using the screwdriver. Image 4
  • 4. 4 5. Stand the Wood using sandpaper. Image 5 6. Sawing vertical corner of the timber base to the hinge bases can be used without any problems. Image 6
  • 5. 5 7. Apply reinforcement in the vertical wooden base so that the hinge has a greater range of motion. Such reinforcement is done with the use of a wooden block. Image 7 8. Mark the different heights of the chute. Image 8
  • 6. 6 9. Run drilling them. Image 9 10.Attach the base of the chute with the use of brackets. Image 10
  • 7. 7 11.Place the slip material base to avoid damage and prevent it can slide. 12.Paint the chute. We used green and yellow colours. Image 11 13.Join the parts. Image 12
  • 8. 8 MATERIALES Y HERRAMIENTAS NECESARIOS MATERIAL TOOLS Screws Screwdrivers Plywood Visa Grips Guides Sandpaper Whitetail Brace Pencil Hammer Hinges Subway Squads Saw Drill Cat Wood painting