cover letter
Download as DOCX, PDF1 like160 views
Xolani T Sidambe is seeking a challenging position as an extraordinary diesel mechanic with diagnostic and service skills on heavy duty equipment. He has 11 years of experience in open-cast and underground mining, road construction, and heavy construction projects. Sidambe has skills in overhauling and repairing engines, transmissions, differentials, electrical equipment, and performing diagnostics, troubleshooting, preventative maintenance, and adhering to health and safety regulations.
1 of 1
Download to read offline
![COVER LETTER – XOLANI T SIDAMBE
My aimisto work ina challengingpositionwithinafocusedorganizationwhichthrivestosethigh
classstandardsof operation.Iam seekingextraordinarydiagnosticandservice skillson heavyduty
equipment.A fouryearapprenticeshiptraineddiesel mechanic,borninSoweto,educatedin
Bulawayo,Zimbabwe.Ambitiousandtactful professional with successinheavymining
equipment,compressorsandgenerators.
AREA OF OPERATION:OPENCASTANDUNDERGROUNDMINING,ROADCONSTRUCTION ANDHEAVY
CONSTRUCTION PROJECTS.
Duringmy trainingand11 yearsof experience Iacquiredthe followingskills:
 Overhaulingandmajorrepairs of engines[mechanical and
electronic],transmissions,differentials,finaldrives.
 Repairsandoverhaulsof 12-24volt electrical equipment-startermotors,alternators,wiring
harnesses,instrumentsanddashboards/panels.
 Diagnostics/troubleshootingskills
 ECM[engine control modules] programming,settingof configurations,featuresand
parameters.
 Reading,understandingandusingelectrical,hydraulic schematics
 Strictlyadhering/andthoroughknowledge of rulesandregulationsof Health, Safetyand
 Environment.
 Usingthe CUMMINS Insite electronicdiagnostictool.
 Customerhandlingandcommunicationskills
 Performpreventative andplannedmaintenance onequipment.
 Carry out routine services,unplanned,corrective andpredictivemaintenance.
 Adjustor replace defectivecomponentsorsystemsusinghandandpowertools.
 Complete workordersandjobcards,detailedreportsof anyworkperformed,all partsdrawn
and usedfromstock.
 Clearstipulationof StandardRepairTimes[SRTs]
 Carry out JSA/JHA- JobSafetyAnalysis/JobHazardAnalysis.
SKILL & EXPERTISE
Inspections Time Management ProjectPlanning ,Training, ISO, Analysis, RiskAssessment,
Planned andPreventitive Maintenance, ContinousImprovement.](https://image.slidesharecdn.com/9b49b69b-cc6d-4177-84db-ea30081b8465-150528061729-lva1-app6891/85/cover-letter-1-320.jpg)
Recommended
raj's resume @@@@
raj's resume @@@@RAJA YELLAMELLI
Ìý
Yellamelli raja is seeking a responsible position applying his knowledge and skills in advanced technologies. He has a B.Tech in Electrical and Electronics Engineering from Sreekavitha Engineering College. He has over 2 years of experience in electrical maintenance engineering in India and Saudi Arabia. His skills include programming PLCs, SCADA, DCS, electrical drives, and more. He is proficient in software like MS Office, PLC programming packages, and MATLAB.Saladin c.v
Saladin c.vSalahBadry
Ìý
This document is a resume for Salah eldin Mohamed badry, an electrical maintenance and operations engineer from Egypt with over 12 years of experience. He is seeking a position as an Electrical Maintenance and Operation Manager. His experience includes testing and commissioning electrical equipment, maintaining paper production machinery, programming PLC and DCS systems, and reducing downtime through maintenance. He has a bachelor's degree in electrical engineering and is proficient in Arabic, English, and various electrical testing, maintenance, and programming skills.Saladin c.v
Saladin c.vSalahBadry
Ìý
This document provides a summary of Salah eldin Mohamed badry's professional experience and qualifications. It includes his contact information, work history in electrical maintenance and operation roles for over 12 years, education including a bachelor's degree in electrical engineering, and additional skills like testing electrical installations and maintenance of electrical panels. The objective stated is for an Electrical Maintenance and Operation Manager position.Saladin c.v
Saladin c.vSalahBadry
Ìý
This document contains the contact information, work experience, education, skills, and objective of Salah eldin Mohamed badry. He has over 12 years of experience in electrical installations, commissioning, and maintenance. His most recent role was as a Maintenance and Operation Engineer for a factory for pulp and writing/paper, where he gained experience in various electrical systems, paper machines, and reducing downtime. His objective is an Electrical Maintenance and Operation Manager position.krishna
krishnaVENKATA KRISHNA GUJJULA
Ìý
Venkata Krishna Gujjula is seeking a challenging career in an esteemed organization. He has over 6 years of experience in electrical maintenance and as a service engineer. Currently, he works as a senior engineer at Mylan Laboratories where he is responsible for preventative and breakdown maintenance of equipment, utilities, transformers, and more. Previously, he worked as a service engineer where he diagnosed engine problems and attended regular maintenance visits. He has a Bachelor's degree in electrical engineering and has undergone various training programs in engines, alternators, and controllers.Saladin c.v
Saladin c.vSalahBadry
Ìý
Salah eldin Mohamed badry is an electrical maintenance and operation manager seeking a new position. He has over 12 years of experience in electrical installations, commissioning, maintenance, and fitting. He is proficient in Arabic and English and has a bachelor's degree in electrical engineering. His experience includes testing and commissioning engineering, maintenance engineering, and senior electrical operation and maintenance engineering roles.Document5 - Recovered (2)
Document5 - Recovered (2)Ricardo Demeo
Ìý
Ricardo Ramon Demeo Jr. is an experienced electrician seeking new opportunities. He has an Associate's Degree in Electrical Technology and experience troubleshooting, repairing, and performing preventative maintenance as an Industrial Electrical Technician. His background also includes experience as an Army Diesel Mechanic, where he performed maintenance on diesel trucks.Resume
ResumeEdward Blackwell
Ìý
Edward Blackwell is a mechanical specialist and Army veteran with 5 years of experience as a wheeled vehicle mechanic in the Army. He has a secret security clearance and led teams of 15, managing maintenance for 120 vehicles. He possesses extensive knowledge of hydraulic systems, fuel systems, engines, and brakes. He has received multiple awards for his outstanding performance and professionalism in the Army.ahmed saad
ahmed saadahmed saad
Ìý
This document contains Ahmed Saad Mohamed Ghonem's resume. It lists his personal and contact information, education history including graduating from Port Said University in 2012 with a degree in Electrical Power & Machines. It details his work experience including as an SMT Part Leader at Heesung Electronics Egypt from 2014 to present and previously as an SMD Maintenance Engineer at Samsung Electronics Egypt from 2013 to 2014. It also lists his computer skills, soft skills, and language abilities.GAURAV_CV
GAURAV_CVGaurav Poswal
Ìý
Gaurav Poswal is seeking new opportunities in electrical maintenance, industrial automation or related fields. He has over 3 years of experience working in electrical and automation roles at Bhushan Steel Limited. He has comprehensive knowledge of PLC and automation systems from Siemens, Allen-Bradley, and ABB. His responsibilities have included maintenance, troubleshooting, project work, and documentation. He holds a B.Tech in Electronics and Communication Engineering.Omar Hawari cv
Omar Hawari cvOmar Howwari
Ìý
An electrical engineer graduated from Al-Balqa'a Applied University seeking a challenging career to further develop experience and skills. He has over 5 years of experience as an Electrical Project Engineer and has completed extensive training courses. He is proficient in AutoCAD, Dialux, Matlab and Microsoft Office applications.Suvankar Bhattacharyya
Suvankar BhattacharyyaSUVANKAR BHATTACHARYYA
Ìý
Suvankar Bhattacharyya is an electrical engineer currently working for Siemens Ltd. in Kolkata, India. He has 4 years of experience handling, commissioning, troubleshooting and maintaining Siemens drives, including DC drives, AC drives, and medium voltage drives. Previously, he worked at a steel rolling mill where he oversaw electrical maintenance and operation of the plant, and handled various drives including those from ABB, EEI, and Allen Bradley. He is seeking new career opportunities that allow him to further apply his electrical engineering skills.Electrical Engineer Mena Gamil
Electrical Engineer Mena GamilMENA FATHI ,CPA-IPMA
Ìý
Mena Gameel Fathi is seeking a position as an electrical engineer utilizing their background in process control systems and programmable logic controllers. They have over 10 years of experience in electrical maintenance engineering roles for various companies, where they were responsible for organizing maintenance schedules, allocating work, instrument calibration, responding to breakdowns, and promoting operational excellence. Mena holds a Bachelor's degree in electrical engineering and power from Aswan University, and certifications in project management and various PLC systems.Ali_Alhashim.CV.2015
Ali_Alhashim.CV.2015Ali H Alhashim
Ìý
Ali Hashim Al Hashim is seeking a challenging engineering position where he can apply his experience and academic skills. He has over 5 years of experience as an electrical engineer working on Cummins diesel generators, including adjusting voltages, load testing, and providing technical support to customers. He has a B.S. in Electrical and Computer Engineering from Oregon State University and is proficient in Microsoft Office, circuit simulation software, and Cummins generator control and monitoring systems.Cv
CvER SYED ABRAR UL HAQ
Ìý
Syed Abra Ul Haq is an electrical engineer with over 5 years of experience in the cement industry. He is currently working as an electrical engineer at Dalmia Cement responsible for electrical maintenance and the 132/11kV switchyard. He has a Master's degree in Electrical Power Systems and is seeking new opportunities as an electrical engineer. He has experience planning, operating, and maintaining electrical systems including switchyards, motors, drives, and more at cement plants in India and Saudi Arabia.RAMDASS CV
RAMDASS CVRAMDASS K
Ìý
K. Ramdass is seeking a challenging position utilizing his technical and problem solving skills. He has over 3 years of experience in service engineering and project engineering roles. His experience includes installation, commissioning, preventative maintenance and troubleshooting of various welding equipment. He also has experience with networking projects, PLC programming, SCADA systems and other automation tasks. Ramdass holds a B.E. in electrical engineering and has technical skills in various protocols, operating systems, software and testing tools for industrial equipment.Final IT resume. Heather Bird
Final IT resume. Heather BirdHeather Bird
Ìý
Heather Bird is seeking a position in industrial technology utilizing her education and skills in PLCs, VFDs, industrial machinery maintenance, and electrical systems. She has a certificate in industrial maintenance technology and work experience as a cashier and CNA, and her skills include programming and troubleshooting PLCs, hydraulic and electrical systems maintenance, and machinery component repair.James T Russell Resume
James T Russell ResumeJames Russell
Ìý
James Russell has over 10 years of experience in property management, maintenance, and operations. He has managed commercial properties and overseen maintenance crews. Russell has skills in carpentry, welding, machinery operation and repair, and adheres to all safety regulations. He is looking for a Maintenance Supervisor position to utilize his leadership and technical abilities.Radhe_Resume
Radhe_ResumeRadhe Shyam Singh
Ìý
Radhe Shyam Singh is applying for a position where he can learn and upgrade his skills while achieving organizational objectives. He has 4 years of experience in machine maintenance and quality assurance. He holds a Bachelor's degree in Electrical and Electronics Engineering. His most recent role was as an Electrical Maintenance Engineer at Anchor BY Panasonic, where his responsibilities included preventative maintenance planning, energy management, and team leadership. He has experience working with PLCs, drives, utilities, and handling various projects. He is seeking to enhance his knowledge and skills.hassan1 Electrical Engineer
hassan1 Electrical EngineerHASSAN MANSOUR
Ìý
Hassan Ali Ali Ali Mansour is an electrical engineer seeking a challenging career in design and maintenance management. He has a M.Sc. in Electrical Power and Machines Engineering from Alex University in Egypt and over 10 years of experience in electrical engineering, design, and maintenance in oil and gas plants. Currently he works as an Electrical Engineer in the Asset Engineering Department at SHARQ-SABIC in Saudi Arabia, where his responsibilities include technical support, turnaround maintenance, design change requests, and asset performance management.JamesSchmittResume
JamesSchmittResumejames schmitt
Ìý
James Schmitt has worked as a line cook, dishwasher, sales associate, and currently works as a machine operator. He has a high school diploma and an associate's degree in specialized technology from Ephrata High School and Berks Technical Institute. He is forklift certified with training in light supervision, maintenance, and using computers to track components in industrial settings.Mohamed-Abd-El-Gawad
Mohamed-Abd-El-GawadMohamed Abd el Gawad
Ìý
Mohamed Mahmoud Abd El Gawad is an innovative electrical control engineer with over 10 years of experience in multi-disciplined engineering teams. He has expertise in control system electrical design, BMS, automation concepts, project design, commissioning, start up, manufacturing design improvements, interface systems, data protocols, DDC, PLC and SCADA. He has been a BMS Senior Engineer at Comatrol Company in Egypt since 2014, where he is responsible for tasks such as design, commissioning, programming, software, and communications protocols. He has contributed to projects for pharmaceutical, banking, government, and other sectors.Resume
ResumePRAMOD SHINDE
Ìý
Pramod Shinde is seeking a challenging position in a value-driven organization. He has a Bachelor's degree in Electronics and Telecommunication Engineering. He has over 10 years of experience in maintenance roles at various manufacturing companies. Currently, he works as an Associate Manager at Sterlite Technologies, where his responsibilities include attending to machine breakdowns, preventive maintenance, and improvement projects. Previously he has worked at Baxter India and Cosmo Films in similar maintenance and engineering roles.wordresume
wordresumeBrett Pacl
Ìý
This document is a resume for Brett M. Pacl that outlines his professional experience as a Navy veteran and current I&C Technician. It highlights his skills in electrical troubleshooting, calibration, and repair. It also lists his education and certifications. His work history includes being an Electricians Mate in the Navy for 8 years where he maintained electrical systems, and his current role involves calibrating and repairing test equipment. He is also pursuing a degree in Network Security.Joseph Gleghorn Resume
Joseph Gleghorn ResumeJoe Gleghorn
Ìý
This document is a resume for Joseph Gleghorn that summarizes his education, work experience, certifications, volunteer work, and awards. Gleghorn graduated from Precision Manufacturing Institute with a diploma in Mechatronics and from Mohawk High School. His work experience includes being a mechanic at Plaza Lanes where he performed repairs, maintenance tasks, and customer service. He has certifications in forklift operation and mechatronics and has volunteered with various organizations. Gleghorn received multiple awards for perfect attendance and academic achievement.resume
resumeJim Gerstner
Ìý
Norman James Gerstner is a senior compressor mechanic with over 20 years of experience in compressor repair, maintenance, and mechanical services. He has strong mechanical skills and knowledge of new compressor technologies. As the lead compressor mechanic at Midcon Compression from 2006 to 2016, he developed training programs, accurately diagnosed and repaired mechanical issues, and led overhaul crews. He also competently delivered preventative and corrective field services. Prior to that, from 1996 to 2006 at Rocky's Truck & Auto Repair, he provided maintenance to trucks and autos, inspected equipment, and disassembled and reassembled components.kapilumak
kapilumakkapil umak
Ìý
This document contains a summary of Kapil Umak's professional experience and qualifications. It summarizes that he has nearly 12 years of experience in operations and maintenance of electrical equipment as the Lead Engineer (Manager) for Tata Power Co Ltd. It also lists his educational qualifications which include a B.E. in Electrical Engineering from Amravati University and HSC from Amravati Board.Saladin c.v 
Saladin c.v SalahBadry
Ìý
This document contains the resume of Salah eldin Mohamed badry, an Egyptian electrical engineer seeking an Electrical Maintenance and Operation Manager position. It summarizes his over 12 years of experience in electrical installations, maintenance, and commissioning across various industries. It also lists his education qualifications and additional skills like electrical panel design, maintenance, and testing.Mahmoud_Amer_final_resume
Mahmoud_Amer_final_resumeMahmoud Amer
Ìý
Mahmoud Amer has a Bachelor's degree in Electrical Engineering from Suez Canal University in Egypt and a diploma in Electrical and Mechatronics from Greenville Technical College in the US. He has 9 years of experience in instrumentation, electrical maintenance, and project support for companies in various industries. His areas of expertise include PLC programming, PID control, transmitter calibration, mechatronics systems, and leadership. Currently he works as a senior instrumentation engineer for a maritime project in Kuwait maintaining equipment on oil platforms.Service Engineer
Service EngineerChrister Lindholm
Ìý
The document advertises a job opening for a field service engineer position in Estonia, Latvia, and Lithuania with CLE Baltic. The role involves installing, maintaining, and repairing various machines like press brakes, shears, and laser cutting machines. Requirements include a technical degree or equivalent experience, relevant language skills, and the physical ability to lift equipment and work weekends.More Related Content
What's hot (19)
ahmed saad
ahmed saadahmed saad
Ìý
This document contains Ahmed Saad Mohamed Ghonem's resume. It lists his personal and contact information, education history including graduating from Port Said University in 2012 with a degree in Electrical Power & Machines. It details his work experience including as an SMT Part Leader at Heesung Electronics Egypt from 2014 to present and previously as an SMD Maintenance Engineer at Samsung Electronics Egypt from 2013 to 2014. It also lists his computer skills, soft skills, and language abilities.GAURAV_CV
GAURAV_CVGaurav Poswal
Ìý
Gaurav Poswal is seeking new opportunities in electrical maintenance, industrial automation or related fields. He has over 3 years of experience working in electrical and automation roles at Bhushan Steel Limited. He has comprehensive knowledge of PLC and automation systems from Siemens, Allen-Bradley, and ABB. His responsibilities have included maintenance, troubleshooting, project work, and documentation. He holds a B.Tech in Electronics and Communication Engineering.Omar Hawari cv
Omar Hawari cvOmar Howwari
Ìý
An electrical engineer graduated from Al-Balqa'a Applied University seeking a challenging career to further develop experience and skills. He has over 5 years of experience as an Electrical Project Engineer and has completed extensive training courses. He is proficient in AutoCAD, Dialux, Matlab and Microsoft Office applications.Suvankar Bhattacharyya
Suvankar BhattacharyyaSUVANKAR BHATTACHARYYA
Ìý
Suvankar Bhattacharyya is an electrical engineer currently working for Siemens Ltd. in Kolkata, India. He has 4 years of experience handling, commissioning, troubleshooting and maintaining Siemens drives, including DC drives, AC drives, and medium voltage drives. Previously, he worked at a steel rolling mill where he oversaw electrical maintenance and operation of the plant, and handled various drives including those from ABB, EEI, and Allen Bradley. He is seeking new career opportunities that allow him to further apply his electrical engineering skills.Electrical Engineer Mena Gamil
Electrical Engineer Mena GamilMENA FATHI ,CPA-IPMA
Ìý
Mena Gameel Fathi is seeking a position as an electrical engineer utilizing their background in process control systems and programmable logic controllers. They have over 10 years of experience in electrical maintenance engineering roles for various companies, where they were responsible for organizing maintenance schedules, allocating work, instrument calibration, responding to breakdowns, and promoting operational excellence. Mena holds a Bachelor's degree in electrical engineering and power from Aswan University, and certifications in project management and various PLC systems.Ali_Alhashim.CV.2015
Ali_Alhashim.CV.2015Ali H Alhashim
Ìý
Ali Hashim Al Hashim is seeking a challenging engineering position where he can apply his experience and academic skills. He has over 5 years of experience as an electrical engineer working on Cummins diesel generators, including adjusting voltages, load testing, and providing technical support to customers. He has a B.S. in Electrical and Computer Engineering from Oregon State University and is proficient in Microsoft Office, circuit simulation software, and Cummins generator control and monitoring systems.Cv
CvER SYED ABRAR UL HAQ
Ìý
Syed Abra Ul Haq is an electrical engineer with over 5 years of experience in the cement industry. He is currently working as an electrical engineer at Dalmia Cement responsible for electrical maintenance and the 132/11kV switchyard. He has a Master's degree in Electrical Power Systems and is seeking new opportunities as an electrical engineer. He has experience planning, operating, and maintaining electrical systems including switchyards, motors, drives, and more at cement plants in India and Saudi Arabia.RAMDASS CV
RAMDASS CVRAMDASS K
Ìý
K. Ramdass is seeking a challenging position utilizing his technical and problem solving skills. He has over 3 years of experience in service engineering and project engineering roles. His experience includes installation, commissioning, preventative maintenance and troubleshooting of various welding equipment. He also has experience with networking projects, PLC programming, SCADA systems and other automation tasks. Ramdass holds a B.E. in electrical engineering and has technical skills in various protocols, operating systems, software and testing tools for industrial equipment.Final IT resume. Heather Bird
Final IT resume. Heather BirdHeather Bird
Ìý
Heather Bird is seeking a position in industrial technology utilizing her education and skills in PLCs, VFDs, industrial machinery maintenance, and electrical systems. She has a certificate in industrial maintenance technology and work experience as a cashier and CNA, and her skills include programming and troubleshooting PLCs, hydraulic and electrical systems maintenance, and machinery component repair.James T Russell Resume
James T Russell ResumeJames Russell
Ìý
James Russell has over 10 years of experience in property management, maintenance, and operations. He has managed commercial properties and overseen maintenance crews. Russell has skills in carpentry, welding, machinery operation and repair, and adheres to all safety regulations. He is looking for a Maintenance Supervisor position to utilize his leadership and technical abilities.Radhe_Resume
Radhe_ResumeRadhe Shyam Singh
Ìý
Radhe Shyam Singh is applying for a position where he can learn and upgrade his skills while achieving organizational objectives. He has 4 years of experience in machine maintenance and quality assurance. He holds a Bachelor's degree in Electrical and Electronics Engineering. His most recent role was as an Electrical Maintenance Engineer at Anchor BY Panasonic, where his responsibilities included preventative maintenance planning, energy management, and team leadership. He has experience working with PLCs, drives, utilities, and handling various projects. He is seeking to enhance his knowledge and skills.hassan1 Electrical Engineer
hassan1 Electrical EngineerHASSAN MANSOUR
Ìý
Hassan Ali Ali Ali Mansour is an electrical engineer seeking a challenging career in design and maintenance management. He has a M.Sc. in Electrical Power and Machines Engineering from Alex University in Egypt and over 10 years of experience in electrical engineering, design, and maintenance in oil and gas plants. Currently he works as an Electrical Engineer in the Asset Engineering Department at SHARQ-SABIC in Saudi Arabia, where his responsibilities include technical support, turnaround maintenance, design change requests, and asset performance management.JamesSchmittResume
JamesSchmittResumejames schmitt
Ìý
James Schmitt has worked as a line cook, dishwasher, sales associate, and currently works as a machine operator. He has a high school diploma and an associate's degree in specialized technology from Ephrata High School and Berks Technical Institute. He is forklift certified with training in light supervision, maintenance, and using computers to track components in industrial settings.Mohamed-Abd-El-Gawad
Mohamed-Abd-El-GawadMohamed Abd el Gawad
Ìý
Mohamed Mahmoud Abd El Gawad is an innovative electrical control engineer with over 10 years of experience in multi-disciplined engineering teams. He has expertise in control system electrical design, BMS, automation concepts, project design, commissioning, start up, manufacturing design improvements, interface systems, data protocols, DDC, PLC and SCADA. He has been a BMS Senior Engineer at Comatrol Company in Egypt since 2014, where he is responsible for tasks such as design, commissioning, programming, software, and communications protocols. He has contributed to projects for pharmaceutical, banking, government, and other sectors.Resume
ResumePRAMOD SHINDE
Ìý
Pramod Shinde is seeking a challenging position in a value-driven organization. He has a Bachelor's degree in Electronics and Telecommunication Engineering. He has over 10 years of experience in maintenance roles at various manufacturing companies. Currently, he works as an Associate Manager at Sterlite Technologies, where his responsibilities include attending to machine breakdowns, preventive maintenance, and improvement projects. Previously he has worked at Baxter India and Cosmo Films in similar maintenance and engineering roles.wordresume
wordresumeBrett Pacl
Ìý
This document is a resume for Brett M. Pacl that outlines his professional experience as a Navy veteran and current I&C Technician. It highlights his skills in electrical troubleshooting, calibration, and repair. It also lists his education and certifications. His work history includes being an Electricians Mate in the Navy for 8 years where he maintained electrical systems, and his current role involves calibrating and repairing test equipment. He is also pursuing a degree in Network Security.Joseph Gleghorn Resume
Joseph Gleghorn ResumeJoe Gleghorn
Ìý
This document is a resume for Joseph Gleghorn that summarizes his education, work experience, certifications, volunteer work, and awards. Gleghorn graduated from Precision Manufacturing Institute with a diploma in Mechatronics and from Mohawk High School. His work experience includes being a mechanic at Plaza Lanes where he performed repairs, maintenance tasks, and customer service. He has certifications in forklift operation and mechatronics and has volunteered with various organizations. Gleghorn received multiple awards for perfect attendance and academic achievement.resume
resumeJim Gerstner
Ìý
Norman James Gerstner is a senior compressor mechanic with over 20 years of experience in compressor repair, maintenance, and mechanical services. He has strong mechanical skills and knowledge of new compressor technologies. As the lead compressor mechanic at Midcon Compression from 2006 to 2016, he developed training programs, accurately diagnosed and repaired mechanical issues, and led overhaul crews. He also competently delivered preventative and corrective field services. Prior to that, from 1996 to 2006 at Rocky's Truck & Auto Repair, he provided maintenance to trucks and autos, inspected equipment, and disassembled and reassembled components.kapilumak
kapilumakkapil umak
Ìý
This document contains a summary of Kapil Umak's professional experience and qualifications. It summarizes that he has nearly 12 years of experience in operations and maintenance of electrical equipment as the Lead Engineer (Manager) for Tata Power Co Ltd. It also lists his educational qualifications which include a B.E. in Electrical Engineering from Amravati University and HSC from Amravati Board.Similar to cover letter (20)
Saladin c.v
Saladin c.v SalahBadry
Ìý
This document contains the resume of Salah eldin Mohamed badry, an Egyptian electrical engineer seeking an Electrical Maintenance and Operation Manager position. It summarizes his over 12 years of experience in electrical installations, maintenance, and commissioning across various industries. It also lists his education qualifications and additional skills like electrical panel design, maintenance, and testing.Mahmoud_Amer_final_resume
Mahmoud_Amer_final_resumeMahmoud Amer
Ìý
Mahmoud Amer has a Bachelor's degree in Electrical Engineering from Suez Canal University in Egypt and a diploma in Electrical and Mechatronics from Greenville Technical College in the US. He has 9 years of experience in instrumentation, electrical maintenance, and project support for companies in various industries. His areas of expertise include PLC programming, PID control, transmitter calibration, mechatronics systems, and leadership. Currently he works as a senior instrumentation engineer for a maritime project in Kuwait maintaining equipment on oil platforms.Service Engineer
Service EngineerChrister Lindholm
Ìý
The document advertises a job opening for a field service engineer position in Estonia, Latvia, and Lithuania with CLE Baltic. The role involves installing, maintaining, and repairing various machines like press brakes, shears, and laser cutting machines. Requirements include a technical degree or equivalent experience, relevant language skills, and the physical ability to lift equipment and work weekends.Mahmoud Amer instrument 10-2016
Mahmoud Amer instrument 10-2016Mahmoud Amer
Ìý
Mahmoud Eba is seeking a position as an Instrumentation and Control Engineer. He has a Bachelor's degree in Electrical Engineering from Suez Canal University in Egypt. He has over 9 years of experience working in instrumentation, maintenance, and process control roles for various manufacturing and offshore oil and gas companies. His experience includes programming PLCs, calibrating transmitters, designing and troubleshooting electrical, pneumatic, and hydraulic systems, and leading maintenance teams. He is proficient in techniques like systems analysis, complex problem solving, and leadership.Sedrick Cueto_CV&Cover Letter_
Sedrick Cueto_CV&Cover Letter_Sedrick Cueto
Ìý
Sedrick Cueto is applying for an Electrical Engineer/Maintenance Supervisor/Electrician position. He has 3 years of experience as an Electrical Engineer in power plants in the Philippines. He now seeks a more challenging role in Dubai and believes his experience in maintenance, operations, and safety implementation would be an asset. He is confident he can perform job duties well and maintain positive relationships.Cover letter
Cover letterGokulakrishnan Ramachandran
Ìý
The candidate is applying for an electrical testing and commissioning engineer position. They have 6 years of experience in electrical protection and control systems, working with various relay manufacturers on power and oil & gas projects. Currently, they are spearheading testing and commissioning activities on a Samsung project in Abu Dhabi, which includes high and medium voltage testing, insulation testing, switchgear testing, transformer testing, and ensuring documentation and procedures are followed. The candidate believes their experience, interpersonal skills, and ability to organize and execute strategies would be an asset to the company.ELEC TECH F
ELEC TECH Fmohammed faiz alam
Ìý
Mohammad Faiz Alam is applying for the position of Senior Electrical Technician. He has over 16 years of experience working in Kuwait and Saudi Arabia. He holds a diploma in electrical engineering and has extensive experience planning, installing, and maintaining electrical systems and equipment for oil and gas facilities. He is proficient in all aspects of electrical work including operating switchgears, transformers, and panel boards.A. A attch file industrial Electrician (good one)
A. A attch file industrial Electrician (good one)Ali Ahmad
Ìý
Ali Ahmad is applying for an Industrial Electrician position with the company. He has over 8 years of experience as an electrician working in industrial and commercial settings. He prides himself on safety and believes he can be a valuable asset to the company through his efficient and service-oriented approach. He has always worked with minimum supervision and aims to complete all jobs with diligence, promptness, and honesty. He is requesting a personal interview to further discuss how his qualifications are well suited for the role.Abdelmouizz Mahfouz
Abdelmouizz MahfouzABDELMOAZ BAGHDADY
Ìý
This document contains a summary of Abdelmouizz Mahfouz Baghdady Mohammad's career and qualifications. He has over 17 years of experience in electrical installations and maintenance for large industrial plants. Currently he works as an Electrical Maintenance Manager, where he is responsible for planning and executing maintenance programs. He has a Bachelor's degree in Electrical Engineering and is proficient in English, MS Office, ETAP design software, and various electrical standards.Hamada's cv
Hamada's cvHamada Farag
Ìý
Hamada Farag is an Egyptian electrical engineer seeking a position in technical management or electrical systems. He has almost 7 years of experience in industrial maintenance working for companies like Elfalgi, Saudi Bin-Laden Group, and ASEC Automation. His areas of expertise include electrical network maintenance, system design, and working with equipment like motors, drives, protection relays, and switchgear. He has skills in engineering drawings, programming, and troubleshooting various electrical systems. Farag holds a B.Sc. in power and electrical machines and certifications in project management, leadership, and communication.attach (1)
attach (1)Iqbal khan
Ìý
Iqbal Khan is an electrical supervisor with over 12 years of experience in the cement and steel industries in the UAE, Saudi Arabia, and India. He is proficient in PLC systems, electrical installations, and troubleshooting equipment issues. Currently he works as an electrical shift in charge for Union Cement Company in the UAE, where he oversees electrical maintenance and ensures smooth plant operations. Prior to this, he held similar electrical and instrument roles for several other companies in India, Saudi Arabia, and the UAE. Khan holds a diploma in electrical trades and basic computer skills qualifications.Haja's updated CV
Haja's updated CVHaja Najimudeen
Ìý
Haja najimudeen is seeking a challenging position in power, gas, or desalination plant operation. He has over 8 years of experience as a Senior Power Station Operator at DEWA in Dubai. He currently operates gas turbines, steam turbines, heat recovery steam generators, auxiliary boilers, and desalination plants. He is proficient in DCS systems like Toshiba Tosmap and GE Mark VI. He is trained in the operation and maintenance of various equipment from manufacturers like GE, Siemens, Alstom, and Toshiba. He holds a diploma in electrical engineering and a post-diploma in thermal power plant engineering. He is looking to utilize his experienceRESUME
RESUMEv s narayana raju Bhupathiraju
Ìý
B V S Narayana is an electrical engineer with over 21 years of experience in erection, testing, commissioning, operation, and maintenance of electrical systems. He has worked on projects in cement, power, and process plants. He is proficient in various electrical equipment including transformers, motors, switchgear, and control systems. Narayana seeks a suitable position where he can utilize his skills in electrical planning and project management.H TYAGI LATEST (1)
H TYAGI LATEST (1)Himanshu Tyagi
Ìý
Himanshu Raj Tyagi is an electrical engineer with over 11 years of experience working in maintenance roles for companies like SABIC, Essar Industries, JSW-Ispat, and Zerone Electricals. He has expertise in substations, switchgear, transformers, and plant maintenance. Currently he works as an electrical engineer in the maintenance department of SABIC's Eastern Petrochemical Company in Jubail, Saudi Arabia. He has technical skills in areas like project management, commissioning, and maintenance of electrical equipment. He is seeking a challenging lead position that utilizes his experience in maintenance and operations.C.V 2015
C.V 2015sadam sami
Ìý
This document is a curriculum vitae for Sadam Sami Abd-Alaziz. It includes his contact information, career objective, education qualifications, skills, and qualifications experience. He has a B.S.C in Electrical Engineering from Iraq University of Basrah in 2009. His skills include SAP, Microsoft Office, Photoshop, AutoCAD, and working on various academic and professional projects. He has over 5 years of work experience in oil projects, electrical maintenance, and as an electrical and mechanical maintenance officer.Resume
ResumeYousif Mohammed Abdelmalik
Ìý
Yousif Abdelmalik is applying for a position with 9 years of experience as a superintendent engineer and operation and maintenance experience in power plants. He has a Bachelor's degree in Mechanical Engineering and has experience managing staff and projects related to power plants, pump stations, and diesel generators. He is looking for a suitable position that utilizes his skills in plant operations, maintenance, and project management.bahadin elec.eng
bahadin elec.engBahadin Omar
Ìý
Baha Aldin Omer Habib Moammed is a Sudanese electrical engineer seeking a position in electrical maintenance, commissioning, or training. He has over 4 years of experience commissioning and testing protective relays, transformers, and switchgear for substations. He is proficient in English and Arabic with strong computer and typing skills.manu viswanath1
manu viswanath1Manu Viswanath
Ìý
Manu Viswanath is an electrical supervisor seeking a new position. He has 3.5 years of experience as a maintenance supervisor at MRF Ltd. His responsibilities included troubleshooting equipment, planning preventative maintenance, and coordinating activities. He is proficient with PLCs, drives, and software like SAP and Microsoft Office. Some projects he has handled include machine modifications, installing drives to reduce energy consumption, and converting machines to PLC control. He has a diploma in electrical and electronics engineering and has undergone electrical drives training. He aims to utilize his technical and problem-solving skills while taking on responsibilities.Elangovan_Selvam (1)
Elangovan_Selvam (1)Selvam Elangovan
Ìý
This CV summarizes the professional experience of E.SELVAM, who has 19 years of experience in electrical commissioning, maintenance, and startup roles in the oil and gas industries in the Middle East. He is currently working as a senior electrical technician in Abu Dhabi, where his responsibilities include maintenance, testing, commissioning, and troubleshooting of electrical equipment. Previously he held similar roles in Kazakhstan, Qatar, India, Saudi Arabia, and Kuwait, gaining experience working with various oil and gas companies and electrical equipment manufacturers.Electrical Engineer - ejaz cv (dubai) june16
Electrical Engineer - ejaz cv (dubai) june16Ejaz Wagi
Ìý
Ejaz Ahmad Wagi is an electrical engineer based in Dubai with over 4 years of experience in electrical projects and maintenance. He has worked as an electrical engineer at Dewan Farooque Spinning Mill in Lahore, Pakistan from 2014 to 2016 where he was responsible for electrical installations, maintenance, and overseeing the powerhouse. Prior to that, he worked as a junior electrical engineer at Fecto Cement Factory in Islamabad, Pakistan from 2013 to 2014 where he maintained and overhauled machines. He holds a BSc in Electrical Engineering as well as technical certifications including NEBOSH and is proficient in AutoCAD and Microsoft Office.cover letter
- 1. COVER LETTER – XOLANI T SIDAMBE My aimisto work ina challengingpositionwithinafocusedorganizationwhichthrivestosethigh classstandardsof operation.Iam seekingextraordinarydiagnosticandservice skillson heavyduty equipment.A fouryearapprenticeshiptraineddiesel mechanic,borninSoweto,educatedin Bulawayo,Zimbabwe.Ambitiousandtactful professional with successinheavymining equipment,compressorsandgenerators. AREA OF OPERATION:OPENCASTANDUNDERGROUNDMINING,ROADCONSTRUCTION ANDHEAVY CONSTRUCTION PROJECTS. Duringmy trainingand11 yearsof experience Iacquiredthe followingskills:  Overhaulingandmajorrepairs of engines[mechanical and electronic],transmissions,differentials,finaldrives.  Repairsandoverhaulsof 12-24volt electrical equipment-startermotors,alternators,wiring harnesses,instrumentsanddashboards/panels.  Diagnostics/troubleshootingskills  ECM[engine control modules] programming,settingof configurations,featuresand parameters.  Reading,understandingandusingelectrical,hydraulic schematics  Strictlyadhering/andthoroughknowledge of rulesandregulationsof Health, Safetyand  Environment.  Usingthe CUMMINS Insite electronicdiagnostictool.  Customerhandlingandcommunicationskills  Performpreventative andplannedmaintenance onequipment.  Carry out routine services,unplanned,corrective andpredictivemaintenance.  Adjustor replace defectivecomponentsorsystemsusinghandandpowertools.  Complete workordersandjobcards,detailedreportsof anyworkperformed,all partsdrawn and usedfromstock.  Clearstipulationof StandardRepairTimes[SRTs]  Carry out JSA/JHA- JobSafetyAnalysis/JobHazardAnalysis. SKILL & EXPERTISE Inspections Time Management ProjectPlanning ,Training, ISO, Analysis, RiskAssessment, Planned andPreventitive Maintenance, ContinousImprovement.