Crane received on site inspection log
0 likes307 views
This document appears to be a checklist for inspecting a scissor lift or crane before use. It contains questions to check that the work area is suitable, the machine is in working condition, required personal protective equipment is available, and that the operator is trained and authorized to use the equipment. The checklist covers functional tests of controls, lifting mechanisms, fluid levels, tires, and structural integrity. Upon completion, it requests the date, authorized operator name, and signatures to verify the inspection was carried out.
1 of 1
Download to read offline
Recommended
Scissor lift 2 daily inspection log
Scissor lift 2 daily inspection logAzmeel Contracting Company
Ìý
The document is a checklist for inspecting a scissor lift. It contains questions to check for debris, overhead obstructions, the work surface's ability to support the lift, and the environment's suitability. It also has sections to check that required personal protective equipment is available and in good condition, that the operator is trained and authorized, and that the overall machine condition is acceptable. Additional sections check that ground and platform controls function properly, emergency controls work from the ground, outriggers function if equipped, lug nuts are tight, cables and wires are secure, guardrails are in good condition, and placards/warnings are legible. The checklist also prompts inspecting fluid levels, for leaks, loose/missing partsFORKLIFT SAFETY
FORKLIFT SAFETYDwarika Bhushan Sharma
Ìý
Forklifts are extremely useful workplace vehicles, as long as they are used safely and appropriately by operators who are appropriately trained and competent to use them.
Forklifts can be dangerous: they account for 25% of injuries at work. Many workplace accidents involve people being hit or run over by forklift trucks (typically when the forklift is reversing) because the driver did not see them. Owing to their size and weight, injuries resulting from forklifts are generally very serious. Accidents involving them are often caused by poor supervision and a lack of training.
Always:
Wear appropriate personal protective clothing as provided by employer. Hard hat, protective footwear and high visibility clothing are recommended as a minimum when working around forklifts. Other equipment may be needed depending on the working environment
Report defects immediately to supervisor
Make sure work path is free of obstructions
Wear operator restraints, where fitted
Look all around before moving off
Look in the direction of travel
Avoid sudden stops and violent braking
Take care when driving on wet, icy , slippery or loose surfaces Slow down at corners, doorways, and at danger spots
Sound the horn several times when approaching blind corners, exits and entrances
Switch off and remove the key before leaving the forklift. Place the key in a safe location when driving task is completed
Apply the parking brake before leaving the forklift
Report any accidents or near misses to a supervisor
Park the forklift in a safe place, on level ground; never on a slope
Leave the forklift with the mast tilted forwards and the forks fully lowered, with the tips on the floor
Apply the parking brake, select neutral, switch off the engine and remove the key
Return keys or other activating devices to their place of safe-keeping
Report any malfunctions or defects immediately to a supervisor.
Assess the load before lifting. Check weight, size, load centre and security
Make sure that pallets are in good condition
Observe floor loading limits & Travel slowly when going down slopes
Find out the weight of the laden forklift
Check safe working load (SWL) of racking before placing loads onto it
Make sure load does not obstruct view. If it does, drive in reverse, looking in direction.
Make sure there is adequate clearance for the forklift and load, including overhead
Make sure the load is stable, Carry the load as close to ground as possible, Use controls smoothly & arms are fully inserted when travelling with a load
Position forks properly and as widely as possible
Make sure the fork Make sure the forklift is stopped before raising the load
Use suitable attachments for lifting unusual or wide loads
Ensure the forks face uphill when travelling up or down slopes with a load
Ensure the forks face downhill when travelling up or down slopes without a load
Adjust the tilt (where fitted) to suit the gradient and raise the forks to clear the ground
Crane safety and_awareness_presentation_ttp
Crane safety and_awareness_presentation_ttpMounir Bassaid
Ìý
This document discusses crane and lifting equipment safety policies and procedures. It defines key terms related to lifting equipment certification such as maximum working tension, working load, hook load, proof load, and safety factor. It provides guidelines for visual inspection and annual load testing of equipment. Color coding procedures are outlined to identify equipment certification status. Requirements are described for various types of lifting equipment including hooks, shackles, sheaves, tool lifting caps, slings, and containers.Tower crane Basics
Tower crane Basicsrama24x7
Ìý
Tower cranes are cranes that are fixed to the ground with a horizontal boom that is balanced asymmetrically by a short arm carrying a counterweight and a long arm that carries the lifting gear. They have several main components including a base, mast or fixed tower, swing ring, boom, and counterweight. Tower cranes provide many benefits to construction projects by saving time, being multipurpose, and allowing for optimum utilization of resources, though they also have some disadvantages like being cumbersome to erect and dismantle and requiring skilled operators.
Apresentação Nauticus Hull Rule CheckJoão Henrique Volpini Mattos
Ìý
O documento descreve o software Nauticus Hull Rule Check da DNV para verificar o projeto estrutural de navios de acordo com as Regras DNV e CSR. O software fornece ferramentas para modelar seções transversais, definir cargas, analisar escantilhões e gerar relatórios de verificação.0264 GustoMSC_PowerPointTemplate_08_2010[1].PPT![0264 GustoMSC_PowerPointTemplate_08_2010[1].PPT](https://cdn.slidesharecdn.com/ss_thumbnails/9c5a2d68-f315-421f-b705-c95654dbba8a-170210072943-thumbnail.jpg?width=560&fit=bounds)
0264 GustoMSC_PowerPointTemplate_08_2010[1].PPTArie van Dijken
Ìý
The document provides information about commissioning and load testing a 5000 tonne crane. It includes details on safety plans, organization of the testing team, objectives of commissioning and testing, load testing procedures, equipment used for testing like pontoons and weights, and procedures for lowering and raising the crane's A-frame. It also outlines activities to be completed after load testing such as examining components for damage and verifying bolt torques.SUC Brasil 2012 : Engineering Study for Barge Lifting Weight on Crane Barge O...
SUC Brasil 2012 : Engineering Study for Barge Lifting Weight on Crane Barge O...João Henrique Volpini Mattos
Ìý
This engineering study evaluated the structural integrity of using a ballasted barge as the test weight for overload tests of a crane barge with a maximum capacity of 2050 tons. Finite element modeling was conducted using SESAM software to analyze the stresses on the test barge under 5 planned loading conditions up to a maximum of 2255 tons. The results indicated the test barge structure is adequate and the overload tests can proceed in January 2013 as scheduled.
Vetter Material Handling Equipments - German Gulf Enterprises LtdGerman Gulf Enterprises Ltd
Ìý
Since 1889, VETTER is true to its tradition of producing special cranes for special applications, and also supplies slewing jib crane technology for the most demanding requirements e.g. in the oil, gas and offshore industries, including explosion-proof versions on request. The standards products are sold all over the world and meet international. For More Info, Contact: 06 5314136. Email: saleshyd@german-gulf.com
Check list for crane inspection, B C Das
Check list for crane inspection, B C DasBimal Chandra Das
Ìý
It is sharing of knowledge. By Bimal Chandra Das, Rtd. AGM (Safety), Bokaro Steel Plant,/ Bokaro. Kolkata
Schillings crane inspection adelaide
Schillings crane inspection adelaideSchilling s
Ìý
Schillings provides solutions for crane maintenance& inspection in Adelaide. We are at the forefront of the industry providing quality lifting & rigging solutions.Crane wire rope damage and inspection methods
Crane wire rope damage and inspection methodsQSC-Fabrication laboratory
Ìý
This document discusses wire rope damage and nondestructive inspection methods for cranes. It describes two main types of wire rope deterioration: fatigue caused by bending over sheaves and drums, and crushing caused when spooled on multi-layer drums. Visual inspections and electromagnetic inspections are the primary nondestructive inspection methods used to detect broken wires and metallic loss. Electromagnetic inspections provide more detailed insight and are better able to detect internal breaks not visible externally. Periodic inspections are important to monitor deterioration over the rope's lifespan and determine when retirement is necessary for safety.İş kurma süreci
Ä°ÅŸ kurma süreci³Ò¾±°ù¾±ÅŸ¾±³¾°Õ¸é
Ìý
Bir iş fikriniz ve ve bu iş fikrini işe dönüştürmek istiyorunuz. Takip etmeniz gereken süreçler, yapmanız gereken çalışmalar ve sahip olmanız gereken nitelikler hakkında bu sunum temel bilgiler içermektedir.
KOSGEB tarafından yayımlanan "Girişimciler İçin İş Planı Rehberi" esas alınarak hazırlanan bu sunumun tüm girişimciler için faydalı olacağına inanıyoruz.Basic load out methodologies introduction
Basic load out methodologies introductionBruce nguyen
Ìý
The document provides details on the load out plan using skidding and strand jacks. It assigns responsibilities to various managers for the safe execution of the load out. The key steps include pre-ballasting the barge, installing strand jacks and anchor blocks, pre-tensioning strands, breaking out the structure, and pulling it onto the barge while coordinating with ballasting operations. Safety is the top priority, and specific responsibilities are defined for project management, supervisors, and subcontractors to ensure a safe load out.Standard hand signals for controlling crane operations Rigging Information, R...
Standard hand signals for controlling crane operations Rigging Information, R...Azmeel Contracting Company
Ìý
The document outlines standard hand signals for controlling crane operations. It provides illustrations and descriptions of various signals including: hoisting with arms raised in small circles; lowering with arms extended downward in small circles; tapping the head to signal using the main hoist; tapping the elbow to signal using the whip line; pointing thumb upward to raise the boom; pointing thumb downward to lower the boom; moving one hand slowly in front of the other to signal moving slowly; flexing fingers in and out with thumb pointed up or down to raise or lower the boom and load; pointing to signal swinging direction; holding the palm down to signal stopping; rapidly moving the palm down hand for emergency stopping; pushing the hand forward to signal travel; pointing thumbsCrane safety by abidnadeemkhan
Crane safety by abidnadeemkhanguest3d4fa4
Ìý
Major causes of crane accidents include contact with power lines, overturns, falls, and mechanical failures. Accidents often occur due to instability from unsecured or overweight loads, lack of communication between the operator and others, and lack of training. Regular inspection and maintenance by a competent person is needed to ensure cranes are properly maintained and safe to operate. Proper planning, training, and following safety procedures can help prevent crane accidents.2016 CRW - Hands-on Crane Inspection
2016 CRW - Hands-on Crane InspectionSpecialized Carriers & Rigging Association
Ìý
Learn how to perform a proper crane inspection and pass a weigh station or road inspection. There aren’t any power point slides or laser pointers during this session! We’re bringing a mobile crane to the Gaylord Hotel so you can walk through the crane inspection process first-hand with Jeff Hammons, VP, Risk Management, a crane operator plus a local compliance officer. This is a great opportunity to get an insider’s perspective and discover new ways to improve your current inspection procedures.
Speakers: Doug Glover, Crane Operator, Digging & Rigging, Inc.
Jeff Hammons, President, Hammons & Associates
Officer Norm Muller, Bensalem Township Police Department Calculation sheet crane
Calculation sheet craneAzmeel Contracting Company
Ìý
This document contains a lift calculation sheet for a crane job. It provides details of the crane configuration including crane type, boom length, jib type and length. It lists the weights of the crane, load, slings and other equipment. It calculates the total weight of the lift and confirms the lift is safe based on the crane's chart capacity at the actual pick radius.2014 CRW - Best Practices for Wire Rope Installation
2014 CRW - Best Practices for Wire Rope InstallationSpecialized Carriers & Rigging Association
Ìý
If you install, use or inspect wire rope - this presentation is for you! Mr. Buschmann covers a variety of topics including:
• Proper shortening/cutting procedures of high performance wire in the field
• Installing rope onto the drum
• Block twisting and how to solve it
• Inspection criteria
• Common causes for rope damage
• ASME rope discard tables
Additionally, Mr. Buschmann discusses the ISO 4309 discard criteria which now differentiates single from multi-layer drum windings.
Speaker: Knut Buschmann, President, Unirope Ltd.EOT Crane Inspection Check list, helpful for safety officers during inspection
EOT Crane Inspection Check list, helpful for safety officers during inspectionBimal Chandra Das
Ìý
This document contains a checklist for inspecting an EOT crane. It lists 17 parameters to observe including the condition of the cabin, lift platform, limits, neutral interlock system, emergency switches, collector platform, bridge lights, walkways, rails, hooks, pulleys, and ropes. For each parameter, the inspection notes the observation and any remarks. The checklist is used to systematically inspect all components of the EOT crane.Bs 7121 2º INSPECTION, TESTING AND EXAMINATION-CRANES
Bs 7121 2º INSPECTION, TESTING AND EXAMINATION-CRANESANA ISABEL R.R.
Ìý
This document provides guidelines for inspection, testing and examination of cranes according to BS 7121-2 Code of Practice for Safe Use of Cranes Part 2. It outlines requirements for pre-use checks, in-service inspections, and thorough examinations to be carried out by competent personnel. Thorough examinations must follow a written examination scheme and are required at least every 6 months for cranes that lift persons and every 12 months for other cranes. The document specifies inspection and testing procedures, responsibilities of different parties, and record keeping requirements.Tower Crane Installation Work
Tower Crane Installation Worknittipurohit
Ìý
This document discusses the installation and use of tower cranes on construction projects. It defines cranes and describes different types, including tower cranes. The key components of tower cranes are described as the base, climbing tower, swing ring, boom, and counterweight. The erection procedure and utility of tower cranes for lifting heavy loads and transporting them horizontally is outlined. Some disadvantages are that they are cumbersome to erect and dismantle and require skilled operators. Statistics are provided comparing project metrics like concreting time and labor needs with and without a tower crane.Training confined space entry holewatch man [compatibility mode]![Training confined space entry holewatch man [compatibility mode]](https://cdn.slidesharecdn.com/ss_thumbnails/trainingconfinedspaceentryholewatchmancompatibilitymode-170727072207-thumbnail.jpg?width=560&fit=bounds)
Training confined space entry holewatch man [compatibility mode]Azmeel Contracting Company
Ìý
The duty of the hole watch is to monitor entrants in confined spaces and ensure safety. A hole watch must:
- Maintain communication with entrants and monitor conditions inside and outside the space
- Attend safety meetings and enforce the confined space entry permit
- Track personnel entering and exiting, initiate emergency response if needed, and prevent unauthorized entry
- Notify entrants if conditions change requiring evacuationRisk assessment for testing & commissioning of cranes
Risk assessment for testing & commissioning of cranesAzmeel Contracting Company
Ìý
Overhead crane, crane safety, lifting operation, EHS, Safety, Testing of Crane, Commissioning of Cranes,
for soft copy please email me at dawoodibrar@hotmail.comElectricity, Electrical Safety, Electrocution, 
Electricity, Electrical Safety, Electrocution, Azmeel Contracting Company
Ìý
Electricity poses serious dangers that should not be underestimated. While 110 volts can kill, the risk depends on individual body resistance and conditions. Insulation failures in portable electric tools can cause electric shock, burns or falls. Electricity always seeks the lowest resistance path to ground through things like pipes, which increases the risk in wet conditions when body resistance is lower. When working in wet areas, take precautions like using wooden platforms or rubber boots and inspecting tools for defects. Regular tool inspections are important to catch any issues since just 1/10 of an amp can kill.Driving permit urdu
Driving permit urduAzmeel Contracting Company
Ìý
Permit for drivers in urdu, drivers driving on site permit form, permit form,Driving in urdu
Driving in urduAzmeel Contracting Company
Ìý
Break Down Procedure, Safe Driving in Urdu, Safety in Driving during breakdown,Drivign permit form
Drivign permit formAzmeel Contracting Company
Ìý
This document outlines the rules for operating vehicles at a site, including always wearing a seatbelt, not exceeding 25 KPH, using a spotter while reversing, stopping for pedestrians, conducting pre-inspection checks, reporting any defects, not exiting the vehicle except in parking areas, maintaining a 10m distance during tipping and between vehicles, and not using a mobile phone while driving. It also provides emergency contact numbers and spaces to attach license and certification copies.
Defensive driving azmeel
Defensive driving azmeelAzmeel Contracting Company
Ìý
This document provides information on defensive driving techniques for different age groups of drivers, safety tips, and hazard awareness. It discusses that younger drivers aged 16-20 have the highest number of aggressive driving crashes, while drivers tend to drive more cautiously after age 30. Key safety tips included are maintaining adequate following distance, checking mirrors frequently, scanning ahead, wearing seatbelts, driving within your abilities, and adjusting driving based on road and weather conditions. The document emphasizes defensive driving practices like avoiding confrontations, allowing other vehicles to merge safely, and using horns sparingly.More Related Content
Viewers also liked (14)
Check list for crane inspection, B C Das
Check list for crane inspection, B C DasBimal Chandra Das
Ìý
It is sharing of knowledge. By Bimal Chandra Das, Rtd. AGM (Safety), Bokaro Steel Plant,/ Bokaro. KolkataSchillings crane inspection adelaide
Schillings crane inspection adelaideSchilling s
Ìý
Schillings provides solutions for crane maintenance& inspection in Adelaide. We are at the forefront of the industry providing quality lifting & rigging solutions.Crane wire rope damage and inspection methods
Crane wire rope damage and inspection methodsQSC-Fabrication laboratory
Ìý
This document discusses wire rope damage and nondestructive inspection methods for cranes. It describes two main types of wire rope deterioration: fatigue caused by bending over sheaves and drums, and crushing caused when spooled on multi-layer drums. Visual inspections and electromagnetic inspections are the primary nondestructive inspection methods used to detect broken wires and metallic loss. Electromagnetic inspections provide more detailed insight and are better able to detect internal breaks not visible externally. Periodic inspections are important to monitor deterioration over the rope's lifespan and determine when retirement is necessary for safety.İş kurma süreci
Ä°ÅŸ kurma süreci³Ò¾±°ù¾±ÅŸ¾±³¾°Õ¸é
Ìý
Bir iş fikriniz ve ve bu iş fikrini işe dönüştürmek istiyorunuz. Takip etmeniz gereken süreçler, yapmanız gereken çalışmalar ve sahip olmanız gereken nitelikler hakkında bu sunum temel bilgiler içermektedir.
KOSGEB tarafından yayımlanan "Girişimciler İçin İş Planı Rehberi" esas alınarak hazırlanan bu sunumun tüm girişimciler için faydalı olacağına inanıyoruz.Basic load out methodologies introduction
Basic load out methodologies introductionBruce nguyen
Ìý
The document provides details on the load out plan using skidding and strand jacks. It assigns responsibilities to various managers for the safe execution of the load out. The key steps include pre-ballasting the barge, installing strand jacks and anchor blocks, pre-tensioning strands, breaking out the structure, and pulling it onto the barge while coordinating with ballasting operations. Safety is the top priority, and specific responsibilities are defined for project management, supervisors, and subcontractors to ensure a safe load out.Standard hand signals for controlling crane operations Rigging Information, R...
Standard hand signals for controlling crane operations Rigging Information, R...Azmeel Contracting Company
Ìý
The document outlines standard hand signals for controlling crane operations. It provides illustrations and descriptions of various signals including: hoisting with arms raised in small circles; lowering with arms extended downward in small circles; tapping the head to signal using the main hoist; tapping the elbow to signal using the whip line; pointing thumb upward to raise the boom; pointing thumb downward to lower the boom; moving one hand slowly in front of the other to signal moving slowly; flexing fingers in and out with thumb pointed up or down to raise or lower the boom and load; pointing to signal swinging direction; holding the palm down to signal stopping; rapidly moving the palm down hand for emergency stopping; pushing the hand forward to signal travel; pointing thumbsCrane safety by abidnadeemkhan
Crane safety by abidnadeemkhanguest3d4fa4
Ìý
Major causes of crane accidents include contact with power lines, overturns, falls, and mechanical failures. Accidents often occur due to instability from unsecured or overweight loads, lack of communication between the operator and others, and lack of training. Regular inspection and maintenance by a competent person is needed to ensure cranes are properly maintained and safe to operate. Proper planning, training, and following safety procedures can help prevent crane accidents.2016 CRW - Hands-on Crane Inspection
2016 CRW - Hands-on Crane InspectionSpecialized Carriers & Rigging Association
Ìý
Learn how to perform a proper crane inspection and pass a weigh station or road inspection. There aren’t any power point slides or laser pointers during this session! We’re bringing a mobile crane to the Gaylord Hotel so you can walk through the crane inspection process first-hand with Jeff Hammons, VP, Risk Management, a crane operator plus a local compliance officer. This is a great opportunity to get an insider’s perspective and discover new ways to improve your current inspection procedures.
Speakers: Doug Glover, Crane Operator, Digging & Rigging, Inc.
Jeff Hammons, President, Hammons & Associates
Officer Norm Muller, Bensalem Township Police Department Calculation sheet crane
Calculation sheet craneAzmeel Contracting Company
Ìý
This document contains a lift calculation sheet for a crane job. It provides details of the crane configuration including crane type, boom length, jib type and length. It lists the weights of the crane, load, slings and other equipment. It calculates the total weight of the lift and confirms the lift is safe based on the crane's chart capacity at the actual pick radius.2014 CRW - Best Practices for Wire Rope Installation
2014 CRW - Best Practices for Wire Rope InstallationSpecialized Carriers & Rigging Association
Ìý
If you install, use or inspect wire rope - this presentation is for you! Mr. Buschmann covers a variety of topics including:
• Proper shortening/cutting procedures of high performance wire in the field
• Installing rope onto the drum
• Block twisting and how to solve it
• Inspection criteria
• Common causes for rope damage
• ASME rope discard tables
Additionally, Mr. Buschmann discusses the ISO 4309 discard criteria which now differentiates single from multi-layer drum windings.
Speaker: Knut Buschmann, President, Unirope Ltd.EOT Crane Inspection Check list, helpful for safety officers during inspection
EOT Crane Inspection Check list, helpful for safety officers during inspectionBimal Chandra Das
Ìý
This document contains a checklist for inspecting an EOT crane. It lists 17 parameters to observe including the condition of the cabin, lift platform, limits, neutral interlock system, emergency switches, collector platform, bridge lights, walkways, rails, hooks, pulleys, and ropes. For each parameter, the inspection notes the observation and any remarks. The checklist is used to systematically inspect all components of the EOT crane.Bs 7121 2º INSPECTION, TESTING AND EXAMINATION-CRANES
Bs 7121 2º INSPECTION, TESTING AND EXAMINATION-CRANESANA ISABEL R.R.
Ìý
This document provides guidelines for inspection, testing and examination of cranes according to BS 7121-2 Code of Practice for Safe Use of Cranes Part 2. It outlines requirements for pre-use checks, in-service inspections, and thorough examinations to be carried out by competent personnel. Thorough examinations must follow a written examination scheme and are required at least every 6 months for cranes that lift persons and every 12 months for other cranes. The document specifies inspection and testing procedures, responsibilities of different parties, and record keeping requirements.Tower Crane Installation Work
Tower Crane Installation Worknittipurohit
Ìý
This document discusses the installation and use of tower cranes on construction projects. It defines cranes and describes different types, including tower cranes. The key components of tower cranes are described as the base, climbing tower, swing ring, boom, and counterweight. The erection procedure and utility of tower cranes for lifting heavy loads and transporting them horizontally is outlined. Some disadvantages are that they are cumbersome to erect and dismantle and require skilled operators. Statistics are provided comparing project metrics like concreting time and labor needs with and without a tower crane.Standard hand signals for controlling crane operations Rigging Information, R...
Standard hand signals for controlling crane operations Rigging Information, R...Azmeel Contracting Company
Ìý
More from Azmeel Contracting Company (20)
Training confined space entry holewatch man [compatibility mode]
Training confined space entry holewatch man [compatibility mode]Azmeel Contracting Company
Ìý
The duty of the hole watch is to monitor entrants in confined spaces and ensure safety. A hole watch must:
- Maintain communication with entrants and monitor conditions inside and outside the space
- Attend safety meetings and enforce the confined space entry permit
- Track personnel entering and exiting, initiate emergency response if needed, and prevent unauthorized entry
- Notify entrants if conditions change requiring evacuationRisk assessment for testing & commissioning of cranes
Risk assessment for testing & commissioning of cranesAzmeel Contracting Company
Ìý
Overhead crane, crane safety, lifting operation, EHS, Safety, Testing of Crane, Commissioning of Cranes,
for soft copy please email me at dawoodibrar@hotmail.comElectricity, Electrical Safety, Electrocution,
Electricity, Electrical Safety, Electrocution, Azmeel Contracting Company
Ìý
Electricity poses serious dangers that should not be underestimated. While 110 volts can kill, the risk depends on individual body resistance and conditions. Insulation failures in portable electric tools can cause electric shock, burns or falls. Electricity always seeks the lowest resistance path to ground through things like pipes, which increases the risk in wet conditions when body resistance is lower. When working in wet areas, take precautions like using wooden platforms or rubber boots and inspecting tools for defects. Regular tool inspections are important to catch any issues since just 1/10 of an amp can kill.Driving permit urdu
Driving permit urduAzmeel Contracting Company
Ìý
Permit for drivers in urdu, drivers driving on site permit form, permit form,Driving in urdu
Driving in urduAzmeel Contracting Company
Ìý
Break Down Procedure, Safe Driving in Urdu, Safety in Driving during breakdown,Drivign permit form
Drivign permit formAzmeel Contracting Company
Ìý
This document outlines the rules for operating vehicles at a site, including always wearing a seatbelt, not exceeding 25 KPH, using a spotter while reversing, stopping for pedestrians, conducting pre-inspection checks, reporting any defects, not exiting the vehicle except in parking areas, maintaining a 10m distance during tipping and between vehicles, and not using a mobile phone while driving. It also provides emergency contact numbers and spaces to attach license and certification copies.Defensive driving azmeel
Defensive driving azmeelAzmeel Contracting Company
Ìý
This document provides information on defensive driving techniques for different age groups of drivers, safety tips, and hazard awareness. It discusses that younger drivers aged 16-20 have the highest number of aggressive driving crashes, while drivers tend to drive more cautiously after age 30. Key safety tips included are maintaining adequate following distance, checking mirrors frequently, scanning ahead, wearing seatbelts, driving within your abilities, and adjusting driving based on road and weather conditions. The document emphasizes defensive driving practices like avoiding confrontations, allowing other vehicles to merge safely, and using horns sparingly.Weekly welding machine checklist
Weekly welding machine checklistAzmeel Contracting Company
Ìý
This welding machine daily inspection checklist contains 14 items to check such as oil, fuel, and water leakage, electrolyte levels, coolant levels, air filters, fans, emissions, wiring, piping, instruments, grounding, output power, leads, tires, inspection stickers, and fire extinguishers. The unnamed contractor supervisor or foreman is tasked with inspecting these items on a welding machine and recording any remarks daily for a given week at an unspecified project or location.Weekly scaffolding checklist
Weekly scaffolding checklistAzmeel Contracting Company
Ìý
A weekly scaffolding inspection checklist was completed for a construction site. The competent person inspected the scaffolding's tag and information, bracing, clamps, ties, safety rails, platforms, planks, and ladders. Any issues were noted as good or poor. The inspection ensures the scaffolding is properly constructed and maintained for worker safety.Weekly generator check list
Weekly generator check listAzmeel Contracting Company
Ìý
This generator daily inspection checklist documents routine inspections for a generator used on Project098-C58. It lists 14 items to check such as oil, fuel, and water levels, emissions, wiring connections, instruments, grounding, output power, and safety equipment. The contractor supervisor signs off after inspecting the generator each date, noting any remarks.Weekly first aid room checklist
Weekly first aid room checklistAzmeel Contracting Company
Ìý
The weekly first aid room checklist documents 15 items to be inspected in the first aid room including medical waste bins, beds, toiletries, equipment, and appliances. The form is to be completed by the project male nurse, concurred by the safety manager, and returned at the end of the week to the contractor safety manager.Weekly excavation checklist
Weekly excavation checklistAzmeel Contracting Company
Ìý
This weekly inspection checklist documents an excavation site inspection. It lists the competent person who performed the inspection, the excavation location and date. It then lists 15 items that were checked for safety compliance, including daily inspections of the excavation and adjacent areas, use of proper PPE, adequate sloping or shoring of deep excavations, and protections from falling material, water accumulation, and cave-ins. Upon completion of the inspection, the contractor supervisor signs off to confirm the excavation meets safety standards.Weekly ambulance checklist
Weekly ambulance checklistAzmeel Contracting Company
Ìý
This document contains a weekly ambulance checklist for Association of Abu-Nayyan, Azmeel & Saudi Tumpane dated [DATE]. It lists 47 items related to the general vehicle components, engine compartment, and underside that are inspected for an ambulance with Make [MAKE] and Model [MODEL]. The inspected ambulance is designated to Nurse Mahdi Ameen Jaffar and driven by Mr. Hilal Sha. The checklist notes the condition of each item as good, fair, needing repair, or not applicable. Signatures are included from the inspector, driver, nurse, and safety manager to acknowledge the inspection.Weekly air compressor check list
Weekly air compressor check listAzmeel Contracting Company
Ìý
This daily inspection checklist is used to inspect an air compressor on a weekly basis. It includes 14 items to check such as oil, fuel, and water levels; air impeller and radiator coolant levels; moisture in the air receiver tank; safety valve actuation; wiring and piping connections; grounding; emissions; air hose connections; whiplash arrestor; color-coded inspection stickers; and fire extinguishers. For each inspection, the operator's name and date are recorded along with any remarks.Water tanker log sheet
Water tanker log sheetAzmeel Contracting Company
Ìý
This document is a log sheet to record water tanker details for filling a test water tank. It contains columns to note the date, time in, time out, quantity of water filled, driver details, tanker registration number, and representatives from the client and contractor who witnessed the filling. The total time taken to fill the tank is also recorded.Water cooler monthly
Water cooler monthlyAzmeel Contracting Company
Ìý
Drinking water shall only come from portable water sources and be tested monthly. Filters must be replaced weekly with the next due date posted, and coolers disinfected every two days or if unused for seven days. A daily cleaning checklist requires signatures to ensure proper hygiene, storage, and maintenance of water refilling stations.Vehicle plant daily inspection log
Vehicle plant daily inspection logAzmeel Contracting Company
Ìý
The document is a daily inspection log for a vehicle used by Azmeel In Association With Abunayyan & Saudi Tumpane. It contains a checklist of 15 items to inspect including fluid levels, lights, tires, brakes, mirrors and attachments. The log runs from Saturday to Friday and is signed by the driver and transport foreman to confirm inspection of the vehicle.Toilet cleaning check list
Toilet cleaning check listAzmeel Contracting Company
Ìý
This document is a weekly cleaning checklist for a clinic recording the availability of cleaning supplies like tissues and waste bins as well as cleaning activities like floor cleaning at different times of the day and days of the week. It also records the name of the person who performed the cleaning each day and includes their signature.Scaffold & fall arest checklist
Scaffold & fall arest checklistAzmeel Contracting Company
Ìý
The document contains inspection records and checklists for scaffolding, fall arrest systems (harnesses), and ladders used on a construction project. The scaffolding records include information on type, size, dates of erection and dismantling, and inspector signatures. The harness inspection checklist includes details to check each month like snap hooks, lanyard arms, and safety latches. The ladder inspection checklist includes criteria to evaluate hardware, wood/metal condition, rigidity, steps, corrosion, dents/bends, safety feet/ropes, and space for inspector comments.Recently uploaded (20)
GRADE-1-QUARTER 4-MATHEMATICS-WEEK-3.pptx
GRADE-1-QUARTER 4-MATHEMATICS-WEEK-3.pptxAngellieMaeDoce
Ìý
math-matatag curriculum
quarter 4
week 3
grade 1Blind spots in AI and Formulation Science, IFPAC 2025.pdf
Blind spots in AI and Formulation Science, IFPAC 2025.pdfAjaz Hussain
Ìý
The intersection of AI and pharmaceutical formulation science highlights significant blind spots—systemic gaps in pharmaceutical development, regulatory oversight, quality assurance, and the ethical use of AI—that could jeopardize patient safety and undermine public trust. To move forward effectively, we must address these normalized blind spots, which may arise from outdated assumptions, errors, gaps in previous knowledge, and biases in language or regulatory inertia. This is essential to ensure that AI and formulation science are developed as tools for patient-centered and ethical healthcare.
Azure Administrator Interview Questions By ScholarHat
Azure Administrator Interview Questions By ScholarHatScholarhat
Ìý
Azure Administrator Interview Questions By ScholarHat
Azure Data Engineer Interview Questions By ScholarHat
Azure Data Engineer Interview Questions By ScholarHatScholarhat
Ìý
Azure Data Engineer Interview Questions By ScholarHatEffective Product Variant Management in Odoo 18
Effective Product Variant Management in Odoo 18Celine George
Ìý
In this slide we’ll discuss on the effective product variant management in Odoo 18. Odoo concentrates on managing product variations and offers a distinct area for doing so. Product variants provide unique characteristics like size and color to single products, which can be managed at the product template level for all attributes and variants or at the variant level for individual variants.
Rest API Interview Questions PDF By ScholarHat
Rest API Interview Questions PDF By ScholarHatScholarhat
Ìý
Rest API Interview Questions PDF By ScholarHatNUTRITIONAL ASSESSMENT AND EDUCATION - 5TH SEM.pdf
NUTRITIONAL ASSESSMENT AND EDUCATION - 5TH SEM.pdfDolisha Warbi
Ìý
NUTRITIONAL ASSESSMENT AND EDUCATION, Introduction, definition, types - macronutrient and micronutrient, food pyramid, meal planning, nutritional assessment of individual, family and community by using appropriate method, nutrition education, nutritional rehabilitation, nutritional deficiency disorder, law/policies regarding nutrition in India, food hygiene, food fortification, food handling and storage, food preservation, food preparation, food purchase, food consumption, food borne diseases, food poisoning
Unit 1 Computer Hardware for Educational Computing.pptx
Unit 1 Computer Hardware for Educational Computing.pptxRomaSmart1
Ìý
Computers have revolutionized various sectors, including education, by enhancing learning experiences and making information more accessible. This presentation, "Computer Hardware for Educational Computing," introduces the fundamental aspects of computers, including their definition, characteristics, classification, and significance in the educational domain. Understanding these concepts helps educators and students leverage technology for more effective learning.
ASP.NET Web API Interview Questions By Scholarhat
ASP.NET Web API Interview Questions By ScholarhatScholarhat
Ìý
ASP.NET Web API Interview Questions By Scholarhat
ASP.NET Interview Questions PDF By ScholarHat
ASP.NET Interview Questions PDF By ScholarHatScholarhat
Ìý
ASP.NET Interview Questions PDF By ScholarHatThe Constitution, Government and Law making bodies .
The Constitution, Government and Law making bodies .saanidhyapatel09
Ìý
This PowerPoint presentation provides an insightful overview of the Constitution, covering its key principles, features, and significance. It explains the fundamental rights, duties, structure of government, and the importance of constitutional law in governance. Ideal for students, educators, and anyone interested in understanding the foundation of a nation’s legal framework.
Crane received on site inspection log
- 1. Azmeel in Association with Abu Nayyan and Saudi Tumpane Yes No N/A 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 1 2 3 1 2 3 4 5 Is the work surface able to support the lift? Is the environment suitable for planned work? (Wind, rain, mud, ice, lighting) OTHER COMMENTS Are you trained and authorized to operate this serial lift? Is the overall condition of the machine acceptable? WORKSITE INSPECTION Are There any drop-offs, holes or soft spot in your work paths? Is there any debris that will hinder your work? Are there any overhead wires or other obstructions? Do the Emergency Controls function from ground? Do the platform controls function properly? Do outriggers (if equipped) function properly? Does the extending Platform move freely on Scissor lift? MISCELLANEOUS Has all required PPE been acquired, inspected and working properly? Are the wires to the control box covered and secured? Is the guardrail system in good condition all around the lif? Are all Placards, warning signs, control markings legible? FUNCTIONAL INSPECTION Do the ground operating controls function properly? Does the platform move up and down property (perform from ground)? Are there any air, hydraulic or fuel leaks? Are the fluid levels correct (Fuel, engine oil and Coolant etc)? Are there any loose or missing parts? Are the tires and wheels in good condition? Are the lug nuts on the wheel, tight? Are all cables and wires in their harness? Scissor Lift/Crane Arrived on Site Date: Authorized Operator: ______________________ Day: Visual Inspection Is the operators Manual on the machine?