ºÝºÝߣ

ºÝºÝߣShare a Scribd company logo

Deltadyne rca series

•
•
Wilfredo Abel Enríquez Romero
Wilfredo Abel Enríquez Romero

The document describes Pall's RCA series of differential pressure switches and indicators. The RCA series monitors differential pressure across a filter element to signal when it needs changing. Key features include: - Fatigue testing to 1 million cycles at pressures up to 400 bar. Operating temperatures from -20°C to 120°C. - Models with electrical connectors for different applications, including models with LED indicators. - Pressure settings from 2.4 to 3.4 bar. Single pole switches change state when pressure exceeds the set point. - Automatic reset when differential pressure drops below the set point. Connect to Pall filter housings' ports to monitor filter condition.

1 of 2
Download to read offline
‘NEW’ Pall RCA Series Deltadyne Differential Pressure Switch Data Sheet M&ERCAENa Pall RCA216 differential pressure switch Pall RCA217 differential pressure switch Specifications Fatigue Test Pressure: 1 Million cycles at 0-400 bar (5800psi) Operating Temperature: Maximum Fluid Operating Temperature 120 °C (250 °F) Minimum Fluid Operating Temperature -20 °C (-4 °F) Fluid Compatibility: Standard mineral oils and hydrocarbon- based synthetic Hydraulic and Lubrication fluids and Fuels Materials of Construction: Brass body Seal Materials: Fluorocarbon Environmental: IP67 to IEC 60529 connected or unconnected Switch: Normally closed single pole contacts RCA216/217 open on differential pressure exceeding set point Switching Voltage: 48V DC Maximum Switching Current: 0.5 A Maximum Electrical Connectors: RCA 216 - Connector Deustch DT04-2P to mate with Deutsch DT06-2S receptacle RCA 217 - Connector AMP Junior timer to mate with AMP junior timer receptacle 827551-3 and contacts 925596-1 Switch: Single pole, double throw (SPDT) switch RCA218M state changes on differential pressure exceeding set point Switching Voltage: 48V DC Maximum or 250V AC Switching Current: 4 A Maximum Electrical Connectors: Hirschmann type Switch: Single pole, double throw (SPDT) RCA218R switch state changes on differential pressure exceeding set point Switching Voltage: 24V DC Switching Current: 4 A Maximum Electrical Connectors: Hirschmann type with red and green LEDs that illuminate when switch operates Visual indicator: Window changes from white to red on RCA219 detnation. All units automatically reset when differential pressure drops below set-point. System Interface: To fit all standard Pall threaded indicator ports Pall RCA series differential pressure indicators signal the need for filter element change by sensing the differential pressure between ports upstream and downstream of the filter element. They connect to the DeltadyneTM device port available on Pall filter housings. Pall RCA218R differential pressure indicator Pall RCA218M differential pressure indicator Pall RCA219 differential pressure indicator
Visit us on the Web at www.pall.com Pall Corporation has offices and plants throughout the world. For Pall representatives in your area, please go to www.pall.com/contact Because of technological developments related to the products, systems, and/or services described herein, the data and procedures are subject to change without notice. Please consult your Pall representative or visit www.pall.com to verify that this information remains valid. © Copyright 2014, Pall Corporation. Pall, Deltadyne and are trademarks of Pall Corporation. ® Indicates a trademark registered in the USA. Better Lives. Better Planet and Filtration. Separation. Solution.SM are service marks of Pall Corporation. M&ERCAENa Printed in the UK May 2014 25 Harbor Park Drive Port Washington NY 11050 +1 516 484 3600 telephone +1 800 289 7255 toll free US Portsmouth - UK +44 (0)23 9233 8000 telephone +44 (0)23 9233 8811 fax industrialeu@pall.com Table 1 Table 2 Differential Pressure Indicator P/N: RCA Z Z Ordering Information Code 090 091 Pressure 2.4 ± 0.3 bard (35 ± 4 psid) 3.4 ± 0.4 bard (50 ± 6 psid) Table 2 - Pressure Setting Electrical Connection Code 216C 217U 218M 218R 219D Connector Deutsch DT04-2P AMP Junior Timer Hirschmann Hirscmann with Red and Green LED indicators Visual Indicator Table 1 - Connector Option PIN 1 PIN 2 216/217 218 Other options available. Contact Pall Sales for information The switch is wired normally closed. Using normally closed configuration allows for the detection of damaged or broken cables or disconnection. The switch will automatically reset when differential pressure is reduced. Switch can be wired using either normally open or normally closed configuration. The switch will automatically reset when differential pressure is reduced.

More Related Content

Deltadyne rca series

  • 1. ‘NEW’ Pall RCA Series Deltadyne Differential Pressure Switch Data Sheet M&ERCAENa Pall RCA216 differential pressure switch Pall RCA217 differential pressure switch Specifications Fatigue Test Pressure: 1 Million cycles at 0-400 bar (5800psi) Operating Temperature: Maximum Fluid Operating Temperature 120 °C (250 °F) Minimum Fluid Operating Temperature -20 °C (-4 °F) Fluid Compatibility: Standard mineral oils and hydrocarbon- based synthetic Hydraulic and Lubrication fluids and Fuels Materials of Construction: Brass body Seal Materials: Fluorocarbon Environmental: IP67 to IEC 60529 connected or unconnected Switch: Normally closed single pole contacts RCA216/217 open on differential pressure exceeding set point Switching Voltage: 48V DC Maximum Switching Current: 0.5 A Maximum Electrical Connectors: RCA 216 - Connector Deustch DT04-2P to mate with Deutsch DT06-2S receptacle RCA 217 - Connector AMP Junior timer to mate with AMP junior timer receptacle 827551-3 and contacts 925596-1 Switch: Single pole, double throw (SPDT) switch RCA218M state changes on differential pressure exceeding set point Switching Voltage: 48V DC Maximum or 250V AC Switching Current: 4 A Maximum Electrical Connectors: Hirschmann type Switch: Single pole, double throw (SPDT) RCA218R switch state changes on differential pressure exceeding set point Switching Voltage: 24V DC Switching Current: 4 A Maximum Electrical Connectors: Hirschmann type with red and green LEDs that illuminate when switch operates Visual indicator: Window changes from white to red on RCA219 detnation. All units automatically reset when differential pressure drops below set-point. System Interface: To fit all standard Pall threaded indicator ports Pall RCA series differential pressure indicators signal the need for filter element change by sensing the differential pressure between ports upstream and downstream of the filter element. They connect to the DeltadyneTM device port available on Pall filter housings. Pall RCA218R differential pressure indicator Pall RCA218M differential pressure indicator Pall RCA219 differential pressure indicator
  • 2. Visit us on the Web at www.pall.com Pall Corporation has offices and plants throughout the world. For Pall representatives in your area, please go to www.pall.com/contact Because of technological developments related to the products, systems, and/or services described herein, the data and procedures are subject to change without notice. Please consult your Pall representative or visit www.pall.com to verify that this information remains valid. © Copyright 2014, Pall Corporation. Pall, Deltadyne and are trademarks of Pall Corporation. ® Indicates a trademark registered in the USA. Better Lives. Better Planet and Filtration. Separation. Solution.SM are service marks of Pall Corporation. M&ERCAENa Printed in the UK May 2014 25 Harbor Park Drive Port Washington NY 11050 +1 516 484 3600 telephone +1 800 289 7255 toll free US Portsmouth - UK +44 (0)23 9233 8000 telephone +44 (0)23 9233 8811 fax industrialeu@pall.com Table 1 Table 2 Differential Pressure Indicator P/N: RCA Z Z Ordering Information Code 090 091 Pressure 2.4 ± 0.3 bard (35 ± 4 psid) 3.4 ± 0.4 bard (50 ± 6 psid) Table 2 - Pressure Setting Electrical Connection Code 216C 217U 218M 218R 219D Connector Deutsch DT04-2P AMP Junior Timer Hirschmann Hirscmann with Red and Green LED indicators Visual Indicator Table 1 - Connector Option PIN 1 PIN 2 216/217 218 Other options available. Contact Pall Sales for information The switch is wired normally closed. Using normally closed configuration allows for the detection of damaged or broken cables or disconnection. The switch will automatically reset when differential pressure is reduced. Switch can be wired using either normally open or normally closed configuration. The switch will automatically reset when differential pressure is reduced.