Design Resume 1.3
0 likes377 views
Stephen Chun has experience in mechanical engineering and design. He received a Bachelor of Science in Mechanical Engineering from the University of California, San Diego in June 2014. Currently, he works as a Mechanical Design Engineer at Skyfront Inc. where he designed a hybrid engine allowing a quadcopter to fly for over 3 hours. Previously, he has interned at Techstars Accelerator Qualcomm Ventures Incubator and worked on various mechanical engineering projects including a robot that used IP to scan and spray paint 3D objects. He also has experience in product design and entrepreneurship from working on a startup called Nutlockers. His skills include CAD, C++, MATLAB, and controls systems.
1 of 1
Download to read offline
Recommended
Resume_Miao Wang
Resume_Miao WangMiao Wang
油
Miao Wang has a M.S. in Mechanical Engineering from The Ohio State University and a B.S. in Mechanical Engineering from Beijing Institute of Technology. She has experience developing algorithms to predict tire slip angles and count revolutions for tire condition monitoring. She has also conducted finite element analysis on tire harvesters and built circuit boards for signal acquisition. Additionally, she has experience modeling wind turbines in MATLAB/Simulink, designing car bodywork for a Formula SAE team using CAD software, and validating magnetic signal-based failure detection sensors.Resume_JBesler
Resume_JBeslerJoseph Besler
油
Joseph Besler received a B.S. in Mechanical Engineering from Florida State University in 2015 with a GPA of 3.25. He has experience as the procurement chair for a senior design project with Siemens Energy, an extern at the United States Patent and Trademark Office, and an event specialist at Crossmark. Besler is proficient in Matlab, C, Pro-Engineer, and Microsoft Office. He has completed projects involving vehicle design, robotics programming, fair ride design, and modeling a Stirling engine. Besler held leadership roles as secretary of the Society of Automotive Engineers and was a member of two honor societies.Caleb Vanderpleog Resume and Academic Summary
Caleb Vanderpleog Resume and Academic SummaryCaleb VanderPloeg
油
Caleb Vanderploeg is a mechanical engineer with experience in video editing, mechanical engineering, machining, and tutoring. He graduated from Arizona State University with a 3.9 GPA and a Bachelor's degree in mechanical engineering. His experience includes working as a video editor at WireBuzz LLC, a mechanical engineering intern at GoPro Inc., a machinist at Division Design, Engineer, Machine LLC, and a tutor at Varsity Tutoring. He has extensive experience with CAD software such as SolidWorks and Creo, as well as simulation software including ANSYS and Simulink. His academic projects include designing a wind turbine gearbox and a camera gimbal system. He also has experience performing finite elementMaria Krutikova Resume
Maria Krutikova ResumeMaria Krutikova
油
Maria Krutikova is seeking an engineering position utilizing skills in FEA, manufacturing, or engineering management. She has a BSE in Multidisciplinary Engineering from Purdue University and internship experience at SpaceX, Purdue Particle Physics, and Federal Mogul. Her technical skills include ANSYS, GD&T, CAD software, programming, and machine shop experience.sivamani cv - catia
sivamani cv - catiasivamani k
油
- The candidate has over 2.5 years of experience in structural design using CATIA V5 and finite element analysis in the automotive industry.
- He has strong skills in solid modeling, assembly, sheet metal product development, surface modeling, and linear and nonlinear static analysis using ANSYS.
- Some of his past projects include modeling door trims and other interior parts for Renault, modifying roof handles for Hyundai, and analyzing stresses in pressure vessels and drive shafts.Sivaji Resume
Sivaji Resumesivaji atturi
油
Sivaji Atturi is applying for a position as a structural design engineer. He has over 1 year of experience as a civil engineer working on bridge projects for a construction company in Hyderabad, India. He holds an M.Tech in structural engineering and a B.Tech in civil engineering, both with high grades. His experience includes structural analysis, design, and project management. He is proficient with structural engineering software such as ETABS, SAP2000, and STAAD Pro.Resume 2015
Resume 2015Ben Edkin
油
Benjamin Edkin is seeking a job in mechanical engineering. He has a Bachelor of Science in Mechanical Engineering from Georgia Tech with a 3.60 GPA. He has over 3 years of work experience including as a Mechanical Supervisor at Norfolk Southern Corporation and internships involving quality engineering and project engineering. His skills include CAD, CMM programming, GD&T certification, and various Microsoft software. He has received academic honors including being on the Dean's List every semester and being nominated for Pi Tau Sigma honors fraternity.kATHIRAVAN_RESUME
kATHIRAVAN_RESUMEkathiravan R
油
- The document is a resume for Kathiravan R outlining his work experience and qualifications.
- He has over 2.5 years of experience as a Mechanical Design Engineer, currently working at HAAT INCINERATORS Pvt Ltd and previously at Saryam engineering private Limited.
- His skills include using Solidworks, CATIA, HyperMesh and AutoCAD for mechanical design and drafting.Resume - Anshul Mittal
Resume - Anshul MittalAnshul Mittal
油
This curriculum vitae summarizes Anshul Mittal's professional experience and qualifications. He has over 5 years of experience working as an MEP Engineer on high-rise projects in India. His responsibilities included executing MEP activities, preparing bills of quantities, reviewing drawings, supervising sites, and coordinating with contractors. He also has experience designing modular furniture as a Project Engineer. Anshul holds a Bachelor of Engineering degree in Mechanical Engineering and is proficient in AutoCAD, CATIA, ABAQUS and other computer skills. He is seeking a full-time position utilizing his product development, analytical and research abilities.Abhijit patil cv[1]![Abhijit patil cv[1]](https://cdn.slidesharecdn.com/ss_thumbnails/abhijitpatilcv1-150721172746-lva1-app6892-thumbnail.jpg?width=560&fit=bounds)
Abhijit patil cv[1]Abhijit Patil
油
Abhijit Patil is seeking a challenging position to develop his knowledge and leadership skills. He has a Master's in CAD/CAM/CAE from Rajarambapu Institute of Technology with a dissertation on thermal loading effects on CNC machines. He has strong skills in modeling software like Solid Edge and analysis tools like ANSYS. He has work experience in manufacturing companies and has presented papers at various conferences on topics related to his field of study.KC's Resume_
KC's Resume_Kiavash Ahmadi
油
Kiavash "KC" Ahmadi is seeking a mechanical engineering position and has experience leading projects including a Cube-Sat deployable solar array and a foldable surfboard fin mechanism. He has a 3.5 GPA in Mechanical Engineering from UC Santa Barbara and skills in CAD, programming, testing, and analysis tools. His experience also includes IT consulting, building a small compressed air motor, and competing on the Robo-Rats team.CURRICULUM_VITAE
CURRICULUM_VITAEMuntajeeb Shareef
油
This document is a curriculum vitae for Muntajeeb Shareef, who is seeking a position as an HVAC draftsman in Dubai. He has over 7 years of experience in HVAC design and drafting roles for companies in Dubai. His experience includes working on projects such as hotels, gyms, hospitals, and airports. He has qualifications in mechanical drafting and design, AutoCAD, 3DSMAX, and Photoshop. He is proficient in designing ductwork and piping systems using software programs.Quan_Ngo_resume 2016
Quan_Ngo_resume 2016Nickbsb
油
Quan Ngo is a mechanical engineering student expected to graduate with a Master's degree in 2018 from California State University, Long Beach. He has a Bachelor's degree from University of California, Irvine and relevant coursework includes CAD, thermodynamics, fluid dynamics, heat transfer, CFD, and FEA. His experience includes working as a design engineer where he negotiated contracts and designed thermoforming tools. His projects include building aircraft for competitions where he performed design, manufacturing, analysis, and testing. He is proficient in Solidworks, ANSYS, programming languages, and equipment like 3D printers.SHRAVANI RESUME
SHRAVANI RESUMEshravzlovely
油
Shravani is seeking a position that utilizes her 1 year of experience in railway electrification design. She has a Bachelor's degree in Electrical and Electronics Engineering and is proficient in AutoCAD. Some of her responsibilities have included designing layout plans, cross sectional drawings, and structural erection designs for railway electrification projects. She is a quick learner, efficient team player, and has strong communication skills.Planas Resume
Planas ResumeJohn Raymond Planas
油
Raymond Planas is a mechanical engineer with experience in HVAC design, solar PV design, and CAD drafting. He has a bachelor's degree in mechanical engineering from UNLV with a GPA of 3.64. He is proficient in various engineering software programs and holds a Nevada Certified Engineer Intern certification. Planas seeks to utilize his diverse skills and quality focus as a mechanical engineer.Resume Nelson
Resume NelsonJames Nelson
油
James Nelson is seeking a position as a mechanical design engineer in the aerospace industry. He has a Bachelor of Science in Mechanical Engineering from Arizona State University with a 4.0 GPA. His experience includes designing mechanical components and subassemblies as an automation engineer and leading the mechanical group for his university's robotics club. He has skills in CAD, engineering drawings, modeling, and optimization. His projects include designing an electrostatic testing device, optimizing gear ratios in automotive powertrains, modeling turbine heat exchangers, and designing and testing model rockets.Geometric Internship Report
Geometric Internship ReportAbhideep Dasgupta
油
Abhideep Dasgupta completed a 12-week internship at Geometric Americas Inc. in Peoria, IL where he gained experience in product design, analysis, and computer-aided engineering. He started by designing parts for a paving machine but then moved to perform finite element analysis, learning new software and completing preprocessing, analysis, and postprocessing of simulation results. The internship provided valuable hands-on learning across multiple departments that expanded his skills beyond the classroom.Resume
ResumeSakthish Rajan
油
Sakthis Rajan is seeking an entry-level position as a Control Systems Engineer. He has a Master's degree in Mechanical Engineering from the University of Illinois at Chicago and a Bachelor's degree in Electrical and Electronics Engineering from College of Engineering Guindy, Anna University, Chennai, India. His academic projects include modeling an automotive powertrain in MATLAB/Simulink and developing a power simulator and deployable solar panel for a CubeSat. He has engineering experience as a teaching assistant at UIC and internships at Ayalytical Instruments and Ryerson University.Yogaraj resume
Yogaraj resumeYogaraj Jayachandran
油
J. Yogaraj is a mechanical engineer with over 1 year of experience as a design engineer specializing in electro-mechanical components like starter motors. He has expertise in CAD tools like Pro-E and AutoCAD as well as FEA tools like ANSYS. Currently he works at Lucas-TVS designing gear reduction and direct drive starter motors for customers like Tata Motors and Ashok Leyland.Raad_-_CV21_(4)
Raad_-_CV21_(4)raad ismail
油
This CV summarizes Raad Ismail Ibrahem's qualifications and experience in civil engineering and construction management from 1984 to present. He holds two BSc degrees in civil engineering and computer engineering. He has over 10 years of experience in AutoCAD, MS Project, and 3D modeling software. His experience includes positions as design manager, construction manager, quality control manager, and project manager on various residential, commercial, infrastructure and government projects across Iraq. He has extensive expertise in concrete technology, treatment plants, and interior design.Rahul ghosh(1)
Rahul ghosh(1)Rahul Ghosh
油
- Rahul Ghosh is a mechanical engineer with over 8 years of experience in design and drafting.
- He has extensive experience using AutoCAD, Tekla, PDMS, Tribon and SolidWorks software.
- His experience includes projects in material handling systems, bulk carriers, offshore vessels, motors and more for companies in India and Singapore.1.RESUME
1.RESUMEsrinivas u
油
U.Srinivas is seeking a position as a senior land surveyor with over 12 years of experience in construction, structural, and survey work in Qatar, India, and the UAE. He has extensive experience supervising survey works on various projects including buildings, roads, infrastructure, and more. Some of the key projects he has worked on include the New Orbital Highway in Qatar and the National Museum of Qatar. He is proficient in AutoCAD, surveying software, and has experience operating various surveying instruments like total stations and GPS.Resume 7 19 2017
Resume 7 19 2017Rohit Avadhani
油
Rohit Avadhani is seeking an entry-level design or analysis engineer position. He has a MS in Aerospace Engineering from UT Arlington expected in December 2017, and a BTech in Aerospace Engineering from SRM University. He has relevant internship experience at companies including Sree Trio Polytech, Bharat Dynamics Limited, and Aeolus Aero Tech. His academic projects include structural and fluid analysis of composite electric poles using ANSYS and MATLAB for his thesis, modeling pollutant flow using Burgers' equation in MATLAB, designing a high bypass ratio turbofan engine using NPSS and MATLAB, and more.Resume
Resumesitanshu pandya
油
Sitanhsu Harkantray Pandya is a mechanical engineering student seeking a master's degree at the University of Texas at Arlington. He has internship experience in design and analysis at Jindal Steel Works in India where he completed projects on floating shaft arrangement, gear box design, and efficiency analysis of machinery. His academic projects include finite element analysis simulations and the design of an autonomous multipurpose robot. He is skilled in CAD, CAE, programming, and has participated in technical presentations and workshops.Resume_Awoniyi
Resume_AwoniyiAkinnawo Awoniyi
油
Akinnawo Awoniyi is seeking a full-time engineering position where he can apply his mechanical engineering education and skills. He has a Bachelor of Science in Mechanical Engineering from Purdue University and an Associate of Science in Mechanical Engineering from Federal Polytechnic Ado-Ekiti, Nigeria. His skills include CAD/CAM, ANSYS, Pro-Engineering, Excel, MATLAB and Minitab. As a student, he completed various engineering projects including designing an air-powered pitching machine and analyzing a heat exchanger. He has work experience as a lead technician at HP Techlogix assembling and troubleshooting computers, and as an intern supporting engineers and monitoring equipment at Brunelli Construction Company.Kielnecker, Alexander - Resume
Kielnecker, Alexander - ResumeAlexander Kielnecker
油
This document is a resume for Alexander M. Kielnecker, who graduated from New Mexico State University in 2014 with a Bachelor of Science in Mechanical Engineering. He has experience with CAD software, machine shop work, and various engineering topics. His work experience includes serving as a lab technician for a research group developing chemical detection instruments where he designed and built instruments, as well as working on a senior capstone project to create an animatronic dragon and an introductory product development project to build a slot car.Mohammad .Afzaal
Mohammad .AfzaalMohammad Afzaal
油
Mohammad Afzaal is a civil engineer and quantity surveyor with over 8 years of experience in drafting construction drawings, estimating costs, and managing projects in Saudi Arabia and Pakistan. He holds a diploma in quantity surveying and has extensive skills in AutoCAD, MicroStation, Primavera, MS Office, and other BIM/CAD software. He is looking to join an environmentally sustainable firm where he can further his career experience planning, estimating, and overseeing civil and building projects.DARIO LOPEZ SAN DIEGO
DARIO LOPEZ SAN DIEGODario San Diego
油
Dario Lopez is a mechanical engineer from the Philippines seeking a position on a dynamic engineering team. He has over 25 years of experience managing mechanical installation and maintenance projects around the world. His resume details his extensive work history overseeing HVAC, plumbing, and other mechanical systems for various construction companies in countries like the UAE, Libya, Nigeria, Saudi Arabia, and the Philippines.Resume updated 10-15-16
Resume updated 10-15-16alex lanza
油
This document is a resume for Alex Lanza summarizing his qualifications and work experience. It outlines his objective to obtain a position utilizing his skill sets. It then lists his certifications in HVAC/R and degrees in Business Management. The bulk of the document consists of descriptions of his work history in facilities maintenance and HVAC/R mechanics roles over the past decade, demonstrating experience in maintenance, repairs, project management, and customer service.Jacob Napier Resume 1
Jacob Napier Resume 1Jacob Napier
油
The document provides an overview of Jacob Napier's qualifications, technical skills, accomplishments, work experience, education, and background. Jacob has 3 years of daily experience with AutoCad drafting and designing. He has completed many plans for homeowners associations in Conroe, The Woodlands, and Spring. Jacob received his AutoCad certification in 2015 from Loan Star Montgomery and was top of his class. He has worked as an operations manager and designer for Outer Image Design in The Woodlands, Texas since 2015.More Related Content
What's hot (19)
Resume - Anshul Mittal
Resume - Anshul MittalAnshul Mittal
油
This curriculum vitae summarizes Anshul Mittal's professional experience and qualifications. He has over 5 years of experience working as an MEP Engineer on high-rise projects in India. His responsibilities included executing MEP activities, preparing bills of quantities, reviewing drawings, supervising sites, and coordinating with contractors. He also has experience designing modular furniture as a Project Engineer. Anshul holds a Bachelor of Engineering degree in Mechanical Engineering and is proficient in AutoCAD, CATIA, ABAQUS and other computer skills. He is seeking a full-time position utilizing his product development, analytical and research abilities.Abhijit patil cv[1]
Abhijit patil cv[1]Abhijit Patil
油
Abhijit Patil is seeking a challenging position to develop his knowledge and leadership skills. He has a Master's in CAD/CAM/CAE from Rajarambapu Institute of Technology with a dissertation on thermal loading effects on CNC machines. He has strong skills in modeling software like Solid Edge and analysis tools like ANSYS. He has work experience in manufacturing companies and has presented papers at various conferences on topics related to his field of study.KC's Resume_
KC's Resume_Kiavash Ahmadi
油
Kiavash "KC" Ahmadi is seeking a mechanical engineering position and has experience leading projects including a Cube-Sat deployable solar array and a foldable surfboard fin mechanism. He has a 3.5 GPA in Mechanical Engineering from UC Santa Barbara and skills in CAD, programming, testing, and analysis tools. His experience also includes IT consulting, building a small compressed air motor, and competing on the Robo-Rats team.CURRICULUM_VITAE
CURRICULUM_VITAEMuntajeeb Shareef
油
This document is a curriculum vitae for Muntajeeb Shareef, who is seeking a position as an HVAC draftsman in Dubai. He has over 7 years of experience in HVAC design and drafting roles for companies in Dubai. His experience includes working on projects such as hotels, gyms, hospitals, and airports. He has qualifications in mechanical drafting and design, AutoCAD, 3DSMAX, and Photoshop. He is proficient in designing ductwork and piping systems using software programs.Quan_Ngo_resume 2016
Quan_Ngo_resume 2016Nickbsb
油
Quan Ngo is a mechanical engineering student expected to graduate with a Master's degree in 2018 from California State University, Long Beach. He has a Bachelor's degree from University of California, Irvine and relevant coursework includes CAD, thermodynamics, fluid dynamics, heat transfer, CFD, and FEA. His experience includes working as a design engineer where he negotiated contracts and designed thermoforming tools. His projects include building aircraft for competitions where he performed design, manufacturing, analysis, and testing. He is proficient in Solidworks, ANSYS, programming languages, and equipment like 3D printers.SHRAVANI RESUME
SHRAVANI RESUMEshravzlovely
油
Shravani is seeking a position that utilizes her 1 year of experience in railway electrification design. She has a Bachelor's degree in Electrical and Electronics Engineering and is proficient in AutoCAD. Some of her responsibilities have included designing layout plans, cross sectional drawings, and structural erection designs for railway electrification projects. She is a quick learner, efficient team player, and has strong communication skills.Planas Resume
Planas ResumeJohn Raymond Planas
油
Raymond Planas is a mechanical engineer with experience in HVAC design, solar PV design, and CAD drafting. He has a bachelor's degree in mechanical engineering from UNLV with a GPA of 3.64. He is proficient in various engineering software programs and holds a Nevada Certified Engineer Intern certification. Planas seeks to utilize his diverse skills and quality focus as a mechanical engineer.Resume Nelson
Resume NelsonJames Nelson
油
James Nelson is seeking a position as a mechanical design engineer in the aerospace industry. He has a Bachelor of Science in Mechanical Engineering from Arizona State University with a 4.0 GPA. His experience includes designing mechanical components and subassemblies as an automation engineer and leading the mechanical group for his university's robotics club. He has skills in CAD, engineering drawings, modeling, and optimization. His projects include designing an electrostatic testing device, optimizing gear ratios in automotive powertrains, modeling turbine heat exchangers, and designing and testing model rockets.Geometric Internship Report
Geometric Internship ReportAbhideep Dasgupta
油
Abhideep Dasgupta completed a 12-week internship at Geometric Americas Inc. in Peoria, IL where he gained experience in product design, analysis, and computer-aided engineering. He started by designing parts for a paving machine but then moved to perform finite element analysis, learning new software and completing preprocessing, analysis, and postprocessing of simulation results. The internship provided valuable hands-on learning across multiple departments that expanded his skills beyond the classroom.Resume
ResumeSakthish Rajan
油
Sakthis Rajan is seeking an entry-level position as a Control Systems Engineer. He has a Master's degree in Mechanical Engineering from the University of Illinois at Chicago and a Bachelor's degree in Electrical and Electronics Engineering from College of Engineering Guindy, Anna University, Chennai, India. His academic projects include modeling an automotive powertrain in MATLAB/Simulink and developing a power simulator and deployable solar panel for a CubeSat. He has engineering experience as a teaching assistant at UIC and internships at Ayalytical Instruments and Ryerson University.Yogaraj resume
Yogaraj resumeYogaraj Jayachandran
油
J. Yogaraj is a mechanical engineer with over 1 year of experience as a design engineer specializing in electro-mechanical components like starter motors. He has expertise in CAD tools like Pro-E and AutoCAD as well as FEA tools like ANSYS. Currently he works at Lucas-TVS designing gear reduction and direct drive starter motors for customers like Tata Motors and Ashok Leyland.Raad_-_CV21_(4)
Raad_-_CV21_(4)raad ismail
油
This CV summarizes Raad Ismail Ibrahem's qualifications and experience in civil engineering and construction management from 1984 to present. He holds two BSc degrees in civil engineering and computer engineering. He has over 10 years of experience in AutoCAD, MS Project, and 3D modeling software. His experience includes positions as design manager, construction manager, quality control manager, and project manager on various residential, commercial, infrastructure and government projects across Iraq. He has extensive expertise in concrete technology, treatment plants, and interior design.Rahul ghosh(1)
Rahul ghosh(1)Rahul Ghosh
油
- Rahul Ghosh is a mechanical engineer with over 8 years of experience in design and drafting.
- He has extensive experience using AutoCAD, Tekla, PDMS, Tribon and SolidWorks software.
- His experience includes projects in material handling systems, bulk carriers, offshore vessels, motors and more for companies in India and Singapore.1.RESUME
1.RESUMEsrinivas u
油
U.Srinivas is seeking a position as a senior land surveyor with over 12 years of experience in construction, structural, and survey work in Qatar, India, and the UAE. He has extensive experience supervising survey works on various projects including buildings, roads, infrastructure, and more. Some of the key projects he has worked on include the New Orbital Highway in Qatar and the National Museum of Qatar. He is proficient in AutoCAD, surveying software, and has experience operating various surveying instruments like total stations and GPS.Resume 7 19 2017
Resume 7 19 2017Rohit Avadhani
油
Rohit Avadhani is seeking an entry-level design or analysis engineer position. He has a MS in Aerospace Engineering from UT Arlington expected in December 2017, and a BTech in Aerospace Engineering from SRM University. He has relevant internship experience at companies including Sree Trio Polytech, Bharat Dynamics Limited, and Aeolus Aero Tech. His academic projects include structural and fluid analysis of composite electric poles using ANSYS and MATLAB for his thesis, modeling pollutant flow using Burgers' equation in MATLAB, designing a high bypass ratio turbofan engine using NPSS and MATLAB, and more.Resume
Resumesitanshu pandya
油
Sitanhsu Harkantray Pandya is a mechanical engineering student seeking a master's degree at the University of Texas at Arlington. He has internship experience in design and analysis at Jindal Steel Works in India where he completed projects on floating shaft arrangement, gear box design, and efficiency analysis of machinery. His academic projects include finite element analysis simulations and the design of an autonomous multipurpose robot. He is skilled in CAD, CAE, programming, and has participated in technical presentations and workshops.Resume_Awoniyi
Resume_AwoniyiAkinnawo Awoniyi
油
Akinnawo Awoniyi is seeking a full-time engineering position where he can apply his mechanical engineering education and skills. He has a Bachelor of Science in Mechanical Engineering from Purdue University and an Associate of Science in Mechanical Engineering from Federal Polytechnic Ado-Ekiti, Nigeria. His skills include CAD/CAM, ANSYS, Pro-Engineering, Excel, MATLAB and Minitab. As a student, he completed various engineering projects including designing an air-powered pitching machine and analyzing a heat exchanger. He has work experience as a lead technician at HP Techlogix assembling and troubleshooting computers, and as an intern supporting engineers and monitoring equipment at Brunelli Construction Company.Kielnecker, Alexander - Resume
Kielnecker, Alexander - ResumeAlexander Kielnecker
油
This document is a resume for Alexander M. Kielnecker, who graduated from New Mexico State University in 2014 with a Bachelor of Science in Mechanical Engineering. He has experience with CAD software, machine shop work, and various engineering topics. His work experience includes serving as a lab technician for a research group developing chemical detection instruments where he designed and built instruments, as well as working on a senior capstone project to create an animatronic dragon and an introductory product development project to build a slot car.Mohammad .Afzaal
Mohammad .AfzaalMohammad Afzaal
油
Mohammad Afzaal is a civil engineer and quantity surveyor with over 8 years of experience in drafting construction drawings, estimating costs, and managing projects in Saudi Arabia and Pakistan. He holds a diploma in quantity surveying and has extensive skills in AutoCAD, MicroStation, Primavera, MS Office, and other BIM/CAD software. He is looking to join an environmentally sustainable firm where he can further his career experience planning, estimating, and overseeing civil and building projects.Viewers also liked (18)
DARIO LOPEZ SAN DIEGO
DARIO LOPEZ SAN DIEGODario San Diego
油
Dario Lopez is a mechanical engineer from the Philippines seeking a position on a dynamic engineering team. He has over 25 years of experience managing mechanical installation and maintenance projects around the world. His resume details his extensive work history overseeing HVAC, plumbing, and other mechanical systems for various construction companies in countries like the UAE, Libya, Nigeria, Saudi Arabia, and the Philippines.Resume updated 10-15-16
Resume updated 10-15-16alex lanza
油
This document is a resume for Alex Lanza summarizing his qualifications and work experience. It outlines his objective to obtain a position utilizing his skill sets. It then lists his certifications in HVAC/R and degrees in Business Management. The bulk of the document consists of descriptions of his work history in facilities maintenance and HVAC/R mechanics roles over the past decade, demonstrating experience in maintenance, repairs, project management, and customer service.Jacob Napier Resume 1
Jacob Napier Resume 1Jacob Napier
油
The document provides an overview of Jacob Napier's qualifications, technical skills, accomplishments, work experience, education, and background. Jacob has 3 years of daily experience with AutoCad drafting and designing. He has completed many plans for homeowners associations in Conroe, The Woodlands, and Spring. Jacob received his AutoCad certification in 2015 from Loan Star Montgomery and was top of his class. He has worked as an operations manager and designer for Outer Image Design in The Woodlands, Texas since 2015.AmberBradyResume2016
AmberBradyResume2016Amber Brady
油
Amber Brady is seeking a position as a Licensed Practical Nurse. She has over 6 years of experience as an LPN in various medical settings including home health care, urgent care, rehabilitation, and urology. Her experience includes vital signs, wound care, medication administration, injections, and assisting physicians. She has a nursing diploma and certifications in CPR and IV therapy.ange resume
ange resumeange-olivier Dadie
油
Ange Olivier Dadie provides a resume highlighting his professional experience in food service and retail roles in Las Vegas, Nevada since 2009. He has worked as a busser, food runner, model, and sales associate. Dadie also lists education in healthcare and references available upon request.Andy Kelly Resume 1
Andy Kelly Resume 1Andy Kelly
油
Andy Kelly has over 5 years of experience in marine industry marketing communications, including event planning, advertising, public relations, and new product launches. He is proficient with software such as Photoshop, InDesign, and Dreamweaver and has experience managing marketing budgets, developing sales training, and increasing brand awareness. Currently he is a Marketing Communications Manager at Cummins Inc. where he plans global trade shows, leads media relations, and creates digital and print content.MIKES RESUME 2015w
MIKES RESUME 2015wMike Stanford
油
Michael B. P. Stanford is a Lead Facility Engineer with over 10 years of experience managing engineering projects at luxury hotels in Las Vegas. He possesses skills in management, organization, staff development and training, and expertise in HVAC, electrical, and plumbing systems. Prior to his current role, he worked as an aircraft mechanic and commercial driver. He is highly motivated and seeks to make a significant contribution to a new company through his experience.Ashtin G Melchor 2016
Ashtin G Melchor 2016Ashtin Melchor
油
The document is a resume for Ashtin G. Melchor seeking a management position. It summarizes their skills and extensive experience over 12+ years in property maintenance and management. Their most recent role was as a Maintenance Supervisor for Essex Company Trust, where they oversaw maintenance for a 216 unit residential property. Prior to that they held roles as a Service Manager for The Irvine Company and Mechanical Engineer in the Navy.Joaquin Contreras Resume
Joaquin Contreras ResumeJoaquin Contreras
油
Joaquin Contreras Dominguez has a Bachelor's degree in Mechanical Engineering from San Diego State University and an Associate's degree in Arts and Letters and Mathematics from Southwestern Community College. He has skills in CAD software, mechanical design, problem solving, and is bilingual in English and Spanish. His experience includes installing solar panels for low-income homes as a volunteer, designing a thermoacoustic refrigeration system for his senior project, interning to design a water collection prototype and organizing events at SDSU.Resume 2012
Resume 2012Beth MacMillan
油
Beth C. MacMillan is an Atlanta-based marketing and communications professional with over nine years of experience in marketing, branding, event planning, and public relations. She has strong skills in strategic planning, account management, creative development, and social media marketing. Her experience includes roles at EOS Marketing & Communications and Newland Communities, where she received several industry awards for her work developing marketing campaigns and community events.Eric-Nelson-Zugner-resume
Eric-Nelson-Zugner-resumeEric Zugner
油
Eric Nelson Zugner is a mechanical engineer with over 15 years of experience in aeronautical engineering. He received his BSME from San Diego State University in 2013 and is anticipated to receive his MBA in project management in 2018. He currently works as a Mechanical Engineer II for General Atomics-Aeronautical Systems Inc., where he performs liaison tasks among design, manufacturing, and management and designs tools and fixtures to support manufacturing. Prior to his current role, he held intern and engineering positions with GA-ASI, Zugner LLC, Cymer Inc., Custom Marine Electronics, and Zug Prototyping, gaining experience in mechanical design, fabrication, inspection, and repair of aircraft, optics, andResume 2016
Resume 2016Robert Eschbach
油
Robert D. Eschbach is a mechanical engineer seeking a design engineering position in San Diego. He has over 5 years of experience in mechanical design, manufacturing quality, and field engineering. He holds a B.S. in Mechanical Engineering from Iowa State University and is eligible for his PE licensure in California. His experience includes designing power and LNG projects, manufacturing process validations, and internships in process control engineering.detailed
detailedDeanna Baker
油
This document outlines the work history of an individual with over 25 years of experience in communications and human resources roles. They have held positions at several large multinational companies including Newell Brands, Cox Communications, North Highland Consulting, The Home Depot, and Delta Air Lines. In their current role as Manager of Global Communications and Human Resources Communications at Newell Brands, they are responsible for developing and executing global communication strategies.Resume
ResumeAlexandra Myers
油
Alexandra Myers is a law student at the University of the Pacific, McGeorge School of Law. She is a candidate for her Juris Doctor degree in May 2015, with a concentration in criminal justice and a certificate in advocacy. She has experience interning at the Yolo County District Attorney's Office, the Law Offices of Keegan and Myers, as a news anchor and reporter at KZSW TV, and an internship at ABC News in Washington D.C. She received her bachelor's degree from the University of California, Santa Barbara in Communications Studies.Caitlyn Resume
Caitlyn ResumeCaitlyn Nesbitt
油
Caitlyn Nesbitt seeks a position that allows her to utilize her skills in customer service, marketing, administration, and club hospitality. She has over 5 years of experience in member services and management roles at private clubs, including her current role as Member Services Manager at The Madison Club in La Quinta, CA. Nesbitt graduated from Western Carolina University with a Bachelor's degree in Hospitality Tourism Management and a minor in Sales and Marketing. She is proficient in member relations, event planning and coordination, website maintenance, and budgeting.Todd Watson Resume
Todd Watson Resumemtwatson
油
Todd Watson has over 20 years of experience in engineering roles across diverse industries. He specializes in transitioning new products from R&D to manufacturing with a focus on quality improvements. He has expertise in optical assemblies, manufacturing processes, and test fixture design. His most recent role developed and improved assembly and test processes for extreme ultraviolet light sources at Cymer, where he resolved various product issues through analytical troubleshooting.Resume MEW 2015 
Resume MEW 2015 MARVIN WATSON
油
Marvin Watson Sr. has over 30 years of experience as a stationary engineer and plant equipment mechanic. He has worked on projects across various states for companies like CLP, Lerner Corporation, American Operations Corporation, DC Government, and the North Carolina Army National Guard. His experience includes operating, maintaining, and repairing boiler systems, chillers, cooling towers, pumps, and other industrial equipment. He also specializes in pipefitting, plumbing, electrical work, and HVAC systems.Yunan Jin resume 2016
Yunan Jin resume 2016Yunan Jin
油
This document is a resume for Yunan Jin Engineer, who is pursuing an MS in Structural Engineering at UC San Diego. The resume outlines their education, including obtaining a BS in Structural Engineering from UC San Diego with a 3.64 GPA and currently pursuing an MS with a 4.0 GPA. It also lists relevant coursework and skills, including proficiency with engineering software such as SolidWorks, SAP2000, AutoCAD, and MATLAB. The resume provides details of structural engineering projects undertaken as a student, including designing a water tower, stadium, crane, and bridge column. It also notes relevant work experience assisting in a college dining hall.Similar to Design Resume 1.3 (20)
Ting Hung Yu Resume
Ting Hung Yu ResumeTing-Hung Yu
油
Ting Hung Yu is seeking an engineering internship or full-time position where he can utilize his skills in mechanical engineering, CAD software, fabrication techniques, and project management. He has a B.S. in Mechanical Engineering from UC Irvine and experience leading multiple engineering projects involving vehicle and drone design and fabrication using CAD software, 3D printing, and CNC machining. His resume highlights experience managing a large Formula SAE racing team where he designed vehicle components, led manufacturing processes, and delivered business proposals to potential sponsors.AlwynSamuel-Design Eng
AlwynSamuel-Design EngSamuel Victor Alwyn
油
Samuel Alwyn is a mechanical engineering graduate seeking a position where he can learn and contribute to efficient manufacturing. He has a Master's degree in mechanical engineering and certifications in product design and analysis. Alwyn has experience using CAD software like ProE and CATIA as well as simulation software like ANSYS and COMSOL. He has worked as a design engineer and CAD technician at Stryker Instruments where he created models and prints. Alwyn also has research experience in trajectory design and sensor development.Resume - Merwyn Cheruvathur
Resume - Merwyn CheruvathurMerwyn Cheruvathur
油
Merwyn Cheruvathur is seeking a full-time position utilizing his skills in engines, design, testing, modeling, simulation, and CAD. He has a MS in Mechanical Engineering from Michigan Technological University and a BS from University of Pune. His experience includes design engineering internships at Kohler Co. and National Chemical Laboratory. He has skills in CAD software like CATIA, ProEngineer, and Simulink. He also has experience in research related to engines, vehicle modeling, and exhaust gas recirculation systems.Larsen,dustin eng resume_june2016 - copy
Larsen,dustin eng resume_june2016 - copyDustin Larsen
油
General resume covering skills across multiple engineering disciplines including Mechanical, Electrical, Systems, and Software EngineeringMechanical Designer 42015
Mechanical Designer 42015VIREAK PROUM
油
This document is a resume for Vireak Proum, seeking a mechanical designer position. It summarizes his 13+ years of experience in electro-mechanical drafting and design using various CAD software programs. His experience includes projects involving structural designs, piping systems, store fixtures, medical devices, bottling machines, enclosures and more. He has a strong background in 3D modeling, drafting, implementing engineering changes and working with engineers.Arvind pattabhiraman Resume
Arvind pattabhiraman ResumeArvind Pattabhiraman
油
- Arvind Pattabhiraman is a Senior Mechanical Design Engineer at Tesla where he designs prototypes ranging from components to vehicles like the Roadster, Model Y, and Cybertruck.
- He has an MS in Mechanical Engineering and experience in computational modeling, 3D modeling, prototyping, and testing.
- Prior to Tesla, he worked as a Mechanical Design Engineer and researched spray-based EDM processes to reduce fluid consumption and improve efficiency.粥援顎庄稼看京姻艶温稼檎辿壊顎馨辿
粥援顎庄稼看京姻艶温稼檎辿壊顎馨辿Brean Aquino
油
Brean Aquino is a mechanical engineering student at San Jose State University seeking an internship. He has relevant coursework in machine design, heat transfer, HVAC systems design, vibrations, fluid mechanics, mechanics of materials, mechatronics, and controls. Some of his projects include designing an active suspension system, a ceiling fan using CAD software, a CNC mill enclosure, and an HVAC system for an architectural plan. He has experience working as an intern at Wolfe Engineering assembling mechanisms for solar companies. His technical skills include CAD software like ProE/Creo and SolidWorks, programming languages like C/C++, and shop/machining skills.Ortiz_Resume_G
Ortiz_Resume_GNathan Ortiz
油
The document is a resume for Nathan Ortiz seeking an engineering position. It outlines his relevant experience including positions as a Mechanical Design Contractor and Mechanical Engineer where he designed components, fixtures, and packaging. He also lists skills such as CAD modeling, 3D printing, measurement systems, engineering documentation and changes processes, product development, and technical writing. His education includes a B.S. in Mechanical Engineering from the University of Colorado-Denver where he won a design competition for an off-road vehicle.Amazon Spring2
Amazon Spring2Theodore Newman
油
Theodore In Newman is seeking an engineering job pertaining to design and development. He has extensive experience in product testing, design, and development through multiple internships. This includes environmental testing of consumer products, designing measurement systems using sensors and microcontrollers, and product improvement engineering for underwater robots. Newman is bilingual in English and Mandarin, proficient in CAD and programming, and skilled in tools and manufacturing processes. He has a Mechanical Engineering degree from Cal Poly San Luis Obispo with a focus on mechatronics.Jordan_Vance_Resume
Jordan_Vance_ResumeJordan Vance
油
Jordan Vance has over 5 years of experience as a design engineer, including currently leading a design team at Boeing Satellite Systems. He has a B.S. in Mechanical Engineering from UC Berkeley and is an Engineer in Training. His experience includes designing multi-layer insulation products for satellites to optimize for requirements, cost, and manufacturability. He also led teams to complete projects on time and innovated new processes to reduce errors and increase efficiency.Vijay_C-CV
Vijay_C-CVVijay Viju
油
Vijay C has over 4.9 years of experience in engineering design and CAD. He is proficient in CAD tools like CATIA V5, CATIA V6, SolidWorks and AutoCAD. He has worked on projects involving design of natural gas distribution systems, locomotive components, control valves, and aircraft seats. Vijay C is a certified SolidWorks professional and certified in Enterprise PDM. He has experience in 3D modeling, assemblies, sheet metal parts, applying GD&T, and managing engineering data in PLM tools.Suraj_Curriculum Vitae
Suraj_Curriculum VitaeSURAJ SHAHAPURE
油
This document is a curriculum vitae for Suraj Shahapure that provides information about his educational qualifications, work experience, projects, and skills. It summarizes that he has a Bachelor of Engineering degree in Mechanical Engineering, has worked as a Design Engineer at Atlas Copco for over 3 years where he has led projects involving compressor redesign and new product development, and has expertise in CAD tools, mechanical design, and quality standards.MSNewman Resume_20160222
MSNewman Resume_20160222Mariah Newman
油
This document contains contact and background information for Mariah Newman, including her education, skills, work experience, and projects. She has a Bachelor of Applied Science in Mechanical Engineering from the University of British Columbia. Her relevant work experience includes internships at Intel and Suncor Energy in facilities engineering and maintenance roles. She is currently working on her capstone design project involving the design of a robotic climber.spi 3+ years resume
spi 3+ years resumeRamalingeswarareddy Vellala
油
Rama Lingeswara Reddy Vellala is an instrumentation engineer with 3 years of experience working in oil and gas and process plants. He has expertise in AutoCAD, MS Office, SPI, MicroStation and SmartSketch. Some of his responsibilities include preparing instrument indexes, I/O lists, loop diagrams, and hookup drawings. He is currently working on a project in Abu Dhabi called Zirku, where he is contributing to the instrument index, data sheets, wiring diagrams and other documentation using SPI 2013 and Oracle 11g.Resume_Ling_Nie
Resume_Ling_NieLing Nie
油
This document is a resume for L. William Nie seeking a position as a Mechanical Engineer. It summarizes his work experience including positions at Sumitomo Electric Wiring Systems as a Design Engineer, RB-Tech Inc. as a Design Engineer, Perfecular Inc. as a Mechanical Designer, and internships in China. It also lists his education as an MS in Mechanical Engineering from USC and BS from Guang Dong University of Technology, China. Relevant skills include CAD, FEA, injection molding design, and languages of English and Mandarin Chinese.CV-Design engineer
CV-Design engineerPradeep Bhairawadagi
油
This document is a resume for Pradeep M Bhairawadagi, a Design Engineer. It summarizes his educational qualifications including a Bachelor's Degree in Mechanical Engineering, skills in CAD software, and experience designing automation equipment and conducting structural analysis. His objective is to be a top Design Engineer and use his knowledge and experience to contribute to company development.Katie Lawrence Resume (3.19.16)
Katie Lawrence Resume (3.19.16)Katie Lawrence
油
Katie Lawrence is a 2016 graduate of Colorado State University with a Bachelor of Science in Mechanical Engineering and Biomedical Engineering. She has extensive internship experience in mechanical engineering, applications engineering, and assembly technician roles at Wolf Robotics. Her skills include 3D printing, machine shop experience, CAD software such as Creo and SolidWorks, and programming languages including MATLAB, LabView and Robot Studio. She also has experience teaching 3D printing and scanning. Throughout her education, she completed projects involving mechanical design, machining, mechatronics, biomedical problem solving and design practicum. She is organized, motivated and passionate about engineering.JRP_resume_2016
JRP_resume_2016Jeremiah Phillips
油
Jeremiah Phillips is an electro-mechanical engineering technology graduate from Penn State University with experience in CAD, PLCs, machining, welding and automotive mechanics. He has worked as a drivetrain engineer designing crane components using Creo and updating drawings. His senior project involved designing an engine dynamometer system using LabVIEW. He is seeking new opportunities and his contact information is provided.Resume
ResumeMarc Spencer
油
Marc Spencer is a mechanical engineer and E.I.T. seeking a position as a design engineer. He has over 4 years of experience in mechanical engineering roles performing structural and vibration analysis using ANSYS Workbench, designing test stands and spacecraft components in SolidWorks, and completing piping designs and drawings in AutoCAD. Spencer received his Bachelor of Science in Mechanical Engineering from the University of Arizona in 2013.Resume A
Resume AMeng Haotian
油
Haotian Meng has experience as a mechanical engineer for automotive companies in China and the United States. He has a Master's degree in Mechanical Engineering from IIT and a Bachelor's degree from Beihang University. His skills include CAD, CAM, CAE, FEA, simulation, programming, and automotive controlling. Some of his academic projects include modeling and analyzing differential gears, designing an oxygen delivery system, and developing a dual-axis CNC table and ultrasonic motor.Design Resume 1.3
- 1. Stephen Chun 8793 Lightwave Ave. #116, San Diego, CA 92123 Cell: (909) 418-4117 E-mail: stchun1107@gmail.com Education University of California, San Diego June 2014 Bachelor of Science in Mechanical Engineering Experience Skyfront Inc. San Diego, CA Mechanical Design Engineer Jun 2015 Present - Succeeded in designing and develop first hybrid engine for a quadcopter/drone to fly for 3+ hours - Perform stress analysis on the design to replicate vibrations of a two stroke gas engine - Constructed the parts for assembly using 3 axis CNC machine and 3D printers - Devised a pulley belt system to isolate vibrations from hybrid engine from the entire system Techstars Accelerator Qualcomm Ventures Incubator San Diego, CA Mechanical Engineer Intern Jun 2015 Present - Conducted robotics market research to determine the direction of a product and the market niche - Provide mechanical engineer consultation for Solidworks and 3D printing - Oversee the manufacturing process for a robot that used IP to scan and spray paint any 3D object - Consulted for a team developing a modular device that combined an actuator, motor and planetary gearbox Med-Motion Emmecell Design Project La Jolla, CA Chief Design Engineer Mar 2014 Jun 2015 - Work with Emmecell sponsors/stem cell researchers to meet requirements and constraints for holding stem cells - Designed a device to actuate stem cells for 3+ days harnessing only the potential energy from constant torque springs - Implemented a design to allow the device to work in any orientation at 4 degrees Celsius Startup Company Nutlockers Product Design and Entrepreneur La Jolla, CA Design Engineer & Marketing Team Sept 2013 Dec 2013 - Work with a team of four to design a product with market pull - Design, CAD, and manufacture or 3D print parts using Pro/E and SolidWorks - Optimize product as well as keep manufacturing costs down Computer Aided Analysis and Design - Mechanical & Aerospace Engineer 150 La Jolla, CA Student Sept 2013 Dec 2013 - Use Matlab and ANSYS to do finite element design - Follow specification and design requirements to create a 3D model using SolidWorks - Create 3D moving parts using SolidWorks Digital Control Systems - Mechanical & Aerospace Engineer 143C La Jolla, CA Systems and Controls Engineer Sept 2013 Dec 2013 - Use Eagle 6.5.0 to design printed circuit boards - Have a substantial knowledge of C++ to code a Beagle Bone Black - Use classical controls to design and code a self inverting pendulum Skills Computer Skills: AutoCAD C++ Matlab Visual Basic SolidWorks Pro Engineer Wildfire Related Course Works: Fluid Mechanics Manufacturing Partial Differential equations Numerical Methods Controls: Signals and Systems Related Projects: Mechanical & Aerospace Engineering 3 Collaborating with a group of four members to design a robot made of acrylic and two RC motors to place balls into designated bins Mechanical &Aerospace Engineering 156A Collaborating with one other to design an item sorter and distributor using PID controlled turntables, servo motors, and RC motors. Accomplishments Design Use rapid prototyping to develop hybrid engine to achieve first recorded 3+ hrs. of flight on a quadcopter Design Developed first device to safely transport stem cells via flight and agitate cells with no electricity