ºÝºÝߣ

ºÝºÝߣShare a Scribd company logo
Equipment Yes No If no, whatis the
solution?
Comments
Lighting Upon enteringthe
drama studio.Check
there are 10 fresnelsin
the rig. Fresnelslook
like this:
If 10 fresnelsare not
present,youneedtorig
them.Lightsare found
at the backof the hall.
You will needtohang
the lightfroma bar
usinga g clamp.
Tightenthe g clamp
and attach the safety
chainto the bar.
You alsomust checkif
all the lightshave a
safetychainor they
are notsafe to be in
the rig.
If the lightdoesn’thave
a safetychain,youwill
have to attach one. It
mustbe attachedto
the bar and light. They
can be foundat the
back of the hall.
You alsomust check
that all lightsare
riggedcorrectlyand
safely.Theyare not
safe for use until this
stephas been
completed.
If lightsare notrigged
properly,youmust
determine why,andfix
thisproblem.
You mustalso check
there isa G clampfor
each light.
If the lightdoesnot
have a g clamp,they
can be foundat the
back of the hall.
Fresnelshave Barn
doorsto helpdirect
If the lightdoesnot
have barn doors,they
the light.Youmust
checktheyhave these
attached.
can be foundat the
back of the hall.
You mustcheck forgel
framesif theyare
required.
If the lightdoesnot
have gels/gel frames,
theycan be foundat
the back of the hall.
You mustalso check
that the lampholderis
closedproperly,which
will make the lamp
safer.
If the lampholderis
open,close itcarefully
and ensure itissafe.
You mustalso check
that eachlighthas
beenpluggedin
properly,toavoid
havingto checkfuses
etc whenlightsdonot
come on.
If lightsare notplugged
inproperly,please plug
incorrectlyand check
lights.
You mustthenmake
sure that the lightsare
correctlypatchedinto
the desk.
You needtomatch the
socketto the dimmer
numbers,i.e 6-6. This
ispatching.
Ensure that the
dimmerdeskis
connectedtothe
lightingdeskwithDMX
cables.
If it is not,DMX cables
can be foundat the
back of the hall.
Make sure that the
deskispluggedintoa
32 amp socket.
32 amp socketsare
locatedonthe ground.
You mustthencheck
that the lightingdesk
isswitchedonand
workingbefore you
can check yourlights.
If it is notswitchedon,
switchiton.
Ensure the grand
masterfaderis up.
If the grand masteris
not up,the deskwill
not work.
You mustthenalso
checkthat a andb
fadersare on 10.
If theyare down,you
mustput themup in
orderfor the lightsto
come on.
You are thenable to
checkthe lights.Put
up 1 – 6 individuallyto
checklights.
Pushup the fadersone
by one.
If lightsare not
working,youmust
checkthe lightsfuses.
Seektechnical
assistance.
Once you have
determinedthe lights’
fusesare not the
problem,youmust
checkthe extension
cable fuse.
Seektechnical
assistance.
Once you have
checkedfuses,you
mustcheck bulbsin
the lightsas thisis
mostlikelythe
problem.
Change bulb.Correct
bulbscan be foundat
the back of the hall.
If you cannot
determine the
problem,pleaseseek
technical assistance.
Sound Checkif there isa iPod
leadconnectedtothe
sounddesk.
If there is noiPodlead,
youmust reattachone.
Theycan be foundat
the back of the hall.
Alsocheckif the
outputsfromthe desk
are connectedtothe
speakers,asthisisa
vital stepinproducing
sound.
If the speakersare not
connected,youmust
connectthemusingIEC
cables.These canbe
foundat the back of
the hall.
Projection Whenusingprojection
youmust checkthere
isa laptopforyour
use.
If not, youmust source
and connecta laptop.
You alsomust check
that the projector
starts up correctly.
If the projectordoes
not start upproperly

More Related Content

Equipment list drama

  • 1. Equipment Yes No If no, whatis the solution? Comments Lighting Upon enteringthe drama studio.Check there are 10 fresnelsin the rig. Fresnelslook like this: If 10 fresnelsare not present,youneedtorig them.Lightsare found at the backof the hall. You will needtohang the lightfroma bar usinga g clamp. Tightenthe g clamp and attach the safety chainto the bar. You alsomust checkif all the lightshave a safetychainor they are notsafe to be in the rig. If the lightdoesn’thave a safetychain,youwill have to attach one. It mustbe attachedto the bar and light. They can be foundat the back of the hall. You alsomust check that all lightsare riggedcorrectlyand safely.Theyare not safe for use until this stephas been completed. If lightsare notrigged properly,youmust determine why,andfix thisproblem. You mustalso check there isa G clampfor each light. If the lightdoesnot have a g clamp,they can be foundat the back of the hall. Fresnelshave Barn doorsto helpdirect If the lightdoesnot have barn doors,they
  • 2. the light.Youmust checktheyhave these attached. can be foundat the back of the hall. You mustcheck forgel framesif theyare required. If the lightdoesnot have gels/gel frames, theycan be foundat the back of the hall. You mustalso check that the lampholderis closedproperly,which will make the lamp safer. If the lampholderis open,close itcarefully and ensure itissafe. You mustalso check that eachlighthas beenpluggedin properly,toavoid havingto checkfuses etc whenlightsdonot come on. If lightsare notplugged inproperly,please plug incorrectlyand check lights. You mustthenmake sure that the lightsare correctlypatchedinto the desk. You needtomatch the socketto the dimmer numbers,i.e 6-6. This ispatching. Ensure that the dimmerdeskis connectedtothe lightingdeskwithDMX cables. If it is not,DMX cables can be foundat the back of the hall. Make sure that the deskispluggedintoa 32 amp socket. 32 amp socketsare locatedonthe ground.
  • 3. You mustthencheck that the lightingdesk isswitchedonand workingbefore you can check yourlights. If it is notswitchedon, switchiton. Ensure the grand masterfaderis up. If the grand masteris not up,the deskwill not work. You mustthenalso checkthat a andb fadersare on 10. If theyare down,you mustput themup in orderfor the lightsto come on. You are thenable to checkthe lights.Put up 1 – 6 individuallyto checklights. Pushup the fadersone by one. If lightsare not working,youmust checkthe lightsfuses. Seektechnical assistance. Once you have determinedthe lights’ fusesare not the problem,youmust checkthe extension cable fuse. Seektechnical assistance. Once you have checkedfuses,you mustcheck bulbsin the lightsas thisis mostlikelythe problem. Change bulb.Correct bulbscan be foundat the back of the hall. If you cannot determine the
  • 4. problem,pleaseseek technical assistance. Sound Checkif there isa iPod leadconnectedtothe sounddesk. If there is noiPodlead, youmust reattachone. Theycan be foundat the back of the hall. Alsocheckif the outputsfromthe desk are connectedtothe speakers,asthisisa vital stepinproducing sound. If the speakersare not connected,youmust connectthemusingIEC cables.These canbe foundat the back of the hall. Projection Whenusingprojection youmust checkthere isa laptopforyour use. If not, youmust source and connecta laptop. You alsomust check that the projector starts up correctly. If the projectordoes not start upproperly