際際滷

際際滷Share a Scribd company logo
[Show as slideshow]
Step 3: Using a ruler as a guide, take the rounded end of a
paper clip (or a ballpoint pen that has run out of ink) and press along the dotted lines of the pop-
up pieces.
Step 4: Using a ruler as a guide, take the rounded end of a
paper clip (or a ballpoint pen that has run out of ink) and press along the dotted line on the
center of the card. Go all the way from the top to the bottom of the card!
Step 5: Carefully cut out the pop-up pieces for the flower
following the solid, black lines.
Step 6: Carefully cut out the flowers card following the
solid, black lines.
Step 7: Take all three pop-up pieces...
Step 8: ...and flip them over so the black dotted lines are
NOT visible. Color the flower pieces with markers or crayons.
Step 9: Take piece "A" and fold the sides back so the center
fold comes up towards you.
Step 10: Lay the piece on a flat surface and fold up the lower
right tab.
Step 11: Fold up the lower right tab. Set the piece aside.
Step 12: Fold the card in half along it's center and open up
again.
Step 13: Put a small amount of glue along the upper two glue
areas ONLY! DO NOT put glue on the lower glue areas yet.
Step 14: Take piece "A" and align over the matching glue
areas and press onto the card. The pop-up piece will lay flat against the card when it is in
position. Let dry!
Step 15: Take piece "B" and fold the small tab back.
Step 16: Take hold of both sides and fold them up towards
you so the center becomes a valley.
Step 17: You will be inserting piece "B" into piece "A" that is
already glued to the card.
Step 18: Starting from the right side, begin inserting piece
"B" into piece "A" as shown. Make sure the small tab on piece "B" is still folded up and you can
see it.
Step 19: Continue inserting piece "B" into piece "A." The
right side of piece "B" should come all the way down into piece "A" until it stops. This point is
shown by the red arrow.
Step 20: Carefully bring down the left side of piece "B" all
the way down into piece "A." Piece "B" MUST be snugly inserted into piece "A" and should be
equally positioned as shown.
Step 21: Put a VERY small amount of glue on the small tab
on piece "B."
Step 22: Fold the small tab with the glue over onto piece "A"
and press. Let dry!
Step 23: Take piece "C" and fold the sides back so the center
fold comes up towards you.
Step 24: Lay the piece on a flat surface and fold up the lower
right tab.
Step 25: Fold up the lower right tab.
Step 26: Put a small amount of glue along the lower two glue
areas.
Step 27: Take piece "C" and align over the glue areas and
press onto the card.
Step 28: and press onto the card. The pop-up piece will lay
flat against the card when it is in position. Let dry!
Step 29: Carefully close the card.
Step 30: Your pop-up flower card is complete, just in time for
Mother's Day!

More Related Content

Flores mama 001

  • 1. [Show as slideshow] Step 3: Using a ruler as a guide, take the rounded end of a paper clip (or a ballpoint pen that has run out of ink) and press along the dotted lines of the pop- up pieces. Step 4: Using a ruler as a guide, take the rounded end of a paper clip (or a ballpoint pen that has run out of ink) and press along the dotted line on the center of the card. Go all the way from the top to the bottom of the card! Step 5: Carefully cut out the pop-up pieces for the flower following the solid, black lines. Step 6: Carefully cut out the flowers card following the solid, black lines. Step 7: Take all three pop-up pieces...
  • 2. Step 8: ...and flip them over so the black dotted lines are NOT visible. Color the flower pieces with markers or crayons. Step 9: Take piece "A" and fold the sides back so the center fold comes up towards you. Step 10: Lay the piece on a flat surface and fold up the lower right tab. Step 11: Fold up the lower right tab. Set the piece aside. Step 12: Fold the card in half along it's center and open up again.
  • 3. Step 13: Put a small amount of glue along the upper two glue areas ONLY! DO NOT put glue on the lower glue areas yet. Step 14: Take piece "A" and align over the matching glue areas and press onto the card. The pop-up piece will lay flat against the card when it is in position. Let dry! Step 15: Take piece "B" and fold the small tab back. Step 16: Take hold of both sides and fold them up towards you so the center becomes a valley. Step 17: You will be inserting piece "B" into piece "A" that is already glued to the card.
  • 4. Step 18: Starting from the right side, begin inserting piece "B" into piece "A" as shown. Make sure the small tab on piece "B" is still folded up and you can see it. Step 19: Continue inserting piece "B" into piece "A." The right side of piece "B" should come all the way down into piece "A" until it stops. This point is shown by the red arrow. Step 20: Carefully bring down the left side of piece "B" all the way down into piece "A." Piece "B" MUST be snugly inserted into piece "A" and should be equally positioned as shown. Step 21: Put a VERY small amount of glue on the small tab on piece "B."
  • 5. Step 22: Fold the small tab with the glue over onto piece "A" and press. Let dry! Step 23: Take piece "C" and fold the sides back so the center fold comes up towards you. Step 24: Lay the piece on a flat surface and fold up the lower right tab. Step 25: Fold up the lower right tab. Step 26: Put a small amount of glue along the lower two glue areas.
  • 6. Step 27: Take piece "C" and align over the glue areas and press onto the card. Step 28: and press onto the card. The pop-up piece will lay flat against the card when it is in position. Let dry! Step 29: Carefully close the card. Step 30: Your pop-up flower card is complete, just in time for Mother's Day!