HandTools_Presentation_50_際際滷ssss.pptx
- 1. Using and Maintaining Hand Tools Grade 8 TLE - ICT-CSS Module
- 2. Learning Objectives - Discuss the hardware tools used in computer hardware servicing - Identify different types of hand tools - Understand the importance of safety precautions - Practice proper tool maintenance
- 3. Flat Head Screwdriver Used to loosen or tighten slotted screws.
- 4. Phillips Head Screwdriver Used to loosen or tighten crosshead screws.
- 5. Anti-Static Wrist Strap Prevents ESD damage to computer equipment.
- 6. Compressed Air Used to blow away dust and debris.
- 7. Multimeter Tests the integrity of circuits and electricity quality.
- 8. Summary Key takeaways on the use and maintenance of hand tools.
- 9. Torx Screwdriver Used to loosen or tighten screws with a star- like depression, often found in laptops.
- 10. Hex Driver Used to tighten nuts in the same way that a screwdriver tightens screws.
- 11. Needle-Nose Pliers Used to hold small parts.
- 12. Wire Cutter Used to strip and cut wires.
- 13. Tweezers Used to manipulate small parts.
- 14. Soldering Pencil Used to join metal conductors with melted soldering lead.
- 15. Desoldering Tool Used to remove unwanted components from circuits.
- 16. Crimping Tool Connects wires to metal components by attaching a connector at the cable end.
- 17. Lint-Free Cloth Cleans computer components without scratching or leaving debris.
- 18. Paint Brush Used to dust off circuit boards and hard-to- reach areas.
- 19. LAN Tester Tests network connections.
- 20. Loopback Adapter Tests the functionality of computer ports.
- 21. Toner Probe Traces cables by detecting a tone through a connected probe.
- 22. Maintenance Step Clean tools and equipment after use.
- 23. Maintenance Step Tag damaged tools as faulty for repair or replacement.
- 24. Maintenance Step Store hand tools in an accessible location to avoid hazards.
- 25. Maintenance Step Perform regular maintenance checks on tools.
- 26. Maintenance Step Ensure electrical tools are free of dust, oil, and grease.
- 27. Maintenance Step Keep your workspace tidy for efficient and safe work.
- 28. Learning Activity Activity: Match tools with their correct use.
- 29. Learning Activity Activity: Identify tools from a description.
- 30. Learning Activity Activity: Complete a maintenance chart for computer tools.
- 31. Learning Activity Assessment: Multiple choice on tool functions and uses.
- 32. Learning Activity Task: Create an acrostic poem about a chosen tool.
- 33. Placeholder 際際滷 Content placeholder for additional learning points.
- 34. Placeholder 際際滷 Content placeholder for additional learning points.
- 35. Placeholder 際際滷 Content placeholder for additional learning points.
- 36. Placeholder 際際滷 Content placeholder for additional learning points.
- 37. Placeholder 際際滷 Content placeholder for additional learning points.
- 38. Placeholder 際際滷 Content placeholder for additional learning points.
- 39. Placeholder 際際滷 Content placeholder for additional learning points.
- 40. Placeholder 際際滷 Content placeholder for additional learning points.
- 41. Placeholder 際際滷 Content placeholder for additional learning points.
- 42. Placeholder 際際滷 Content placeholder for additional learning points.
- 43. Placeholder 際際滷 Content placeholder for additional learning points.
- 44. Placeholder 際際滷 Content placeholder for additional learning points.
- 45. Placeholder 際際滷 Content placeholder for additional learning points.
- 46. Placeholder 際際滷 Content placeholder for additional learning points.
- 47. Placeholder 際際滷 Content placeholder for additional learning points.
- 48. Placeholder 際際滷 Content placeholder for additional learning points.
- 49. Placeholder 際際滷 Content placeholder for additional learning points.
- 50. Placeholder 際際滷 Content placeholder for additional learning points.