Hdd repair wd hdd head depopping options and steps
1 like1,025 views
This article provides three options for depopping heads on Western Digital HDDs using the DFL-WDII HDD firmware repair tool. It details the steps to clear firmware modules, generate copies of the firmware, depop heads, lower capacity, and perform low-level formatting in order to repair drives and improve data recovery success rates. Users are warned to ensure no damaged firmware modules remain before attempting to depop heads. The full instructions are only available to existing users of the DFL-WDII tool after entering a password.
![HDD Repair-WD HDD Head
Depopping Options And Steps
http://www.dolphindatalab.com/hdd-repair-wd-hdd-head-depopping-options-andsteps
This article teaches users who are using DFL-WDII HDD firmware repair tool to depop the heads
successfully with detailed steps and suggestions in different WD hdd failure situations. It can help
users improve their hdd repair and data recovery success rate effectively. Please Make sure there're
no FW modules which are not damaged before depoping the heads, otherwise, you may fail to depop
the heads. We are sorry but the following contents are available only to our existing users who are
using DFL-WDII hdd firmware repair tool. [protect password="greendolphin"]
WD HDD Head Depopping Steps: Option 1
1 Clear Smart and G-list 2 Clear Translator 3 Generate another copy by editing the OB automatically
4 Depop the head 5 Restart and then perform the low-level formatting.
WD HDD Head Depopping Steps: Option 2
If you fail to depop the head by Option 1, you may select Option 2 to depop the head. 1 Clear Smart
and G-list 2 Clear Translator 3 Generate another copy by editing the OB automatically 4 Depop the
head within the head map 5 Enter the ARCO configuration interface, input 1 in the box used to
lower the capacity (Input 2 if you fail to use 1), click lower the capacity. 6 Restart and the capacity
and ID match automatically, perform low-level formatting and now you make it.
WD HDD Head Depopping Steps: Option 3-For
Clicking WD ROYL drives
1 Modify 0A firstly 2 Find the patient head and cut 0A 3 Enter ARCO configuration interface if the
HDD is detected, input 1 to lower the capacity. It can reset the current capacity and TPI to the default
status according to the 0A. 4 Restart and run low-level formatting, done. ** If there're a lot of bad
sectors within the hdd, we can run ARCO at the 4th step above. 5 Enter ARCO and initialize it 6
Run ARCO 7 RUN PST, Done Note: You need to lower the capacity by inputting 1 or 2, if there's
no error indication, you can then perform the head depopping operation for WD PCB 1640 series.
[/protect]
Data Recovery Tools:](https://image.slidesharecdn.com/hdd-20repair-wd-20hdd-20head-20depopping-20options-20and-20steps-131109024333-phpapp01/85/Hdd-repair-wd-hdd-head-depopping-options-and-steps-1-320.jpg)
Hdd repair wd hdd head depopping options and steps
- 1. HDD Repair-WD HDD Head Depopping Options And Steps http://www.dolphindatalab.com/hdd-repair-wd-hdd-head-depopping-options-andsteps This article teaches users who are using DFL-WDII HDD firmware repair tool to depop the heads successfully with detailed steps and suggestions in different WD hdd failure situations. It can help users improve their hdd repair and data recovery success rate effectively. Please Make sure there're no FW modules which are not damaged before depoping the heads, otherwise, you may fail to depop the heads. We are sorry but the following contents are available only to our existing users who are using DFL-WDII hdd firmware repair tool. [protect password="greendolphin"] WD HDD Head Depopping Steps: Option 1 1 Clear Smart and G-list 2 Clear Translator 3 Generate another copy by editing the OB automatically 4 Depop the head 5 Restart and then perform the low-level formatting. WD HDD Head Depopping Steps: Option 2 If you fail to depop the head by Option 1, you may select Option 2 to depop the head. 1 Clear Smart and G-list 2 Clear Translator 3 Generate another copy by editing the OB automatically 4 Depop the head within the head map 5 Enter the ARCO configuration interface, input 1 in the box used to lower the capacity (Input 2 if you fail to use 1), click lower the capacity. 6 Restart and the capacity and ID match automatically, perform low-level formatting and now you make it. WD HDD Head Depopping Steps: Option 3-For Clicking WD ROYL drives 1 Modify 0A firstly 2 Find the patient head and cut 0A 3 Enter ARCO configuration interface if the HDD is detected, input 1 to lower the capacity. It can reset the current capacity and TPI to the default status according to the 0A. 4 Restart and run low-level formatting, done. ** If there're a lot of bad sectors within the hdd, we can run ARCO at the 4th step above. 5 Enter ARCO and initialize it 6 Run ARCO 7 RUN PST, Done Note: You need to lower the capacity by inputting 1 or 2, if there's no error indication, you can then perform the head depopping operation for WD PCB 1640 series. [/protect] Data Recovery Tools:
- 2. HDD Repair Tools http://www.dolphindatalab.com/product-category/hdd-repair-tools/ Data Recovery Hardware http://www.dolphindatalab.com/product-category/datarecovery-hardware/ DFL-STII Seagate HDD Firmware Repair Tool http://www.dolphindatalab.com/product/seagate-hdd-firmware-repair-tool-dfl-stii/ DFL-DE Data Recovery Hardware http://www.dolphindatalab.com/product/dataextractor-dfl-de/ DFL-DDP Data Recovery Equipment http://www.dolphindatalab.com/product/dfldata-dr-pro-usb-3-data-recovery-equipment/