Post-Tensioning Case Study - Rock and Soil Anchors
2013 Award of Merit: The Memorial Wall at Ground Zero
Location: New York, NY
Submitted by: DYWIDAG-Systems International USA, Inc.
Owner: World Trade Center Memorial Foundation, USA
Architect(s): Handel Architects LLP, Davis Brody Bond, LLP
Engineer(s): Mueser Rutledge Consulting Engineers
Contractor: E.E. Cruz/ Nicholson Constrcution Company, JV.
PT Supplier: DYWIDAG-Systems International USA, Inc.
2. Submitted by: DYWIDAG-Systems International USA, Inc.
Owner: World Trade Center Memorial Foundation, USA
Architect(s): Handel Architects LLP, Davis Brody Bond, LLP
Engineer(s): Mueser Rutledge Consulting Engineers
Contractor: E.E. Cruz/ Nicholson Constrcution Company, JV.
PT Supplier: DYWIDAG-Systems International USA, Inc.
The Memorial Wall at Ground Zero
3. Project Highlights:
• A good example of the use of post-tensioned ground anchors to
stabilize a building excavation to enable a culturally significant
structure to be built.
The Memorial Wall at Ground Zero
4. Project Overview:
Ten years after the terrorist attack on September 11, 2001, that caused
the collapse of the Twin Towers in New York, work at Ground Zero is still
in full swing. Apart from several office towers, a museum is being built
underneath the foundations of the destroyed skyscrapers to
commemorate the attack.
The area’s signature building is an office tower that has been renamed
from Freedom Tower to One World Trade Center. With a height of 1776 ft
(541.32 m), which stands for the year of the Declaration of
Independence, the tower will be the highest skyscraper in Manhattan
after its completion.
The post-tensioning subcontractor supplied strand anchors for stabilizing
the excavations shortly after the attack. The subcontractor also supplied
threadbar tendons and reinforcement systems for the construction of
One World Trade Center.
The Memorial Wall at Ground Zero
5. Project Overview Continued:
The FDNY Memorial Wall, located opposite Ground Zero, has already
been completed and was dedicated by the American president on
September 11, 2011. The wall is dedicated to the 343 firefighters of the
Fire Department of New York who lost their lives during the rescue work.
For stabilizing and tying back the FDNY Memorial Wall, DSI USA supplied
183 epoxy-coated, double corrosion protected (DCP) 66 mm diameter
threadbar anchors 15.5 to 34.4 m (51 to 113 ft) in length with a total
weight of 177 tons, as well as 183 anchorages.
The Memorial Wall at Ground Zero