�ݺ�ߣ

Muhammad Sajid
Address:
Flate # A-5,
Alliance Paradise, Phase-II
(LS-12), Sector 11-C/1,
North Karachi,
Karachi, Pakistan.
(+92)-333-2210576
sajidsb@hotmail.com
Objective: Challenging and rewarding Job in a growth-oriented organization, which
offers diverse job responsibilities and will fully utilize abilities.
Educational Background:
 Bachelor of Technology (B.Tech.) in Mechanical Engineering with 3.27 CGPA from Dada Bhoy
Institute of Higher Education, Karachi, Pakistan in 2004.
 D.A.E. with 2nd
Division from Pak Swiss Training Center, Karachi in 1997.
 S.S.C. with 1st
Division from Govt. High School Sanghar in 1994.
Certifications, Skills & Visits:
Coating Inspection
“NACE Coating Inspector Level-I (CIP-I)” from NACE International, Dubai International
Academy City, Unit Arab Emirate (UAE).
Advance NDT Technique Certifications & Trainings
 “Ultrasonic Testing (UT) Level-II in Phased Array Technique” according to ASNT-SNT-TC-1A
through A-Star Training & Consultancy (Pte) Ltd. Singapore. In August’ 2014.
 “Ultrasonic Testing (UT) Level-II in TOFD Technique” according to ASNT-SNT-TC-1A through
ASNT Level-III from Peoples Steel Mills Limited, Karachi. In August’ 2012. (Re-certification on
March’2015)
 “Training on Phased Array (PA) & Time of flight Diffraction (TOFD)” (02 weeks) from
Olympus Singapore PTE Ltd (SINGAPORE). In January- February 2012.
 “Course on Phased Array (PA) & Time of flight Diffraction (TOFD)” (1 week) from National
Center for NDT, Islamabad. In Dec’2011.
Conventional NDT Level-II Certifications
“Ultrasonic Testing (UT) Level-II” according to ASNT-SNT-TC-1A through ASNT Level-III from
Peoples Steel Mills Limited, Karachi. In July’ 2009 (Last Re-certification on February ’2015)
“Radiographic Testing (RT) Level-II” according to ASNT-SNT-TC-1A through ASNT Level-III
from Entourage International, Islamabad. In June’ 2010 (Re-certification on June’2013 from
Peoples Steel Mills Limited, Karachi)
“Magnetic Particle Testing (MT) Level-II” according to ASNT-SNT-TC-1A through ASNT Level-
III from Entourage International, Islamabad. In June’ 2010 (Last Re-certification on February
’2015 from Peoples Steel Mills Limited, Karachi)
“Dye Penetrant Testing (PT) Level-II” according to ASNT-SNT-TC-1A through ASNT Level-III
from Entourage International, Islamabad. In Jan’ 2011.(Re-certification on February ’2014 from
1/6

Peoples Steel Mills Limited, Karachi)
NDT Level-I Certifications
"Radiographic Testing Level-I " with 3rd
position (92% marks) from "National Center for NDT
(NCNDT)", Islamabad. In Dec’ 2008.
Other NDT Trainings
 “Ultrasonic Flaw Sizing Of Defects” (3 weeks) from National Center for NDT, Islamabad. In
2001.
Visits
SINGAPORE
 A-Star Training & Consultancy (PTE) Ltd. - August’2014 (16 Days)
For Ultrasonic Testing Level-II in Phased Array Technique.
 Olympus Singapore PTE Ltd. - Jan-Feb’2012 (21Days)
For Training of Advance Ultrasonic Testing Equipment (TOFD & PAUT) (Model #OMNI MX).
CHINA
 Dan Dong Hua Ri Electric Co. Ltd. - May’2009 (06 Days)
For Inspection and Training of Radiographic Testing machine (Model # XXG-3005).
Other Training & Skills
 Well use of MS Office
 Well use of Internet
 Well use of ERP
 Awareness training of “ISO 9001:2000” from Peoples Steel Mills Limited, Karachi.
 Training as “Internal Auditor of ISO 9001:2000” from Peoples Steel Mills Limited, Karachi.
Projects:
 Project: Integrity Inspection of Solvent Naphtha Stripper & Top Dish End of Pre-Flash
Tower EPRF-I,
Client: ENAR Petroleum Refining Facility-I
Job description: Performed Thickness Measurement (UT), Dye Penetrant
Testing (PT), Hardness Testing
 Project: Inspection of Pipe Fittings at EPRF-II,
Client: ENAR Petroleum Refining Facility-II
Job description: Performed and monitored Thickness Measurement (UT),
Radiographic Testing (RT), Dye Penetrant Testing (PT), Position Material
Identification (PMI) and metallography
 Project: Fabrication of columns & pressure vessels, of EPRF-II project
2/6

Client: ENAR Petroleum Refining Facility-II, Enar Petrotech Services.
Job description: Performed Ultrasonic Test (UT), Radiographic Testing (RT), Magnetic Particle
Testing (MT), Dye Penetrant Testing (PT) and Thickness measurements..
Project: Fabrication & Installation of Electric Arc Furnace & Ladle,
under ground diesel & kerosene storage tanks
Client: PSM in-house project
Job description: Performed Ultrasonic Test (UT), Radiographic Testing (RT), Magnetic Particle
Testing (MT), Dye Penetrant Testing (PT) and Thickness measurements.
 Project: Construction of Petroleum products storage tanks (capacity 12500 bbl) at
EPRFII, Karachi.
Client: Enar Employees Trust/Enar Petrotech Services
 Job description: Performed Ultrasonic Test (UT) & Radiographic Testing (RT),
 Project: Fabrication of penstock with accessories
Client: Hydrotech power/WAPDA Hydro Power
Job description: Performed Radiographic Testing (RT),
 Project: Maintenance of Stablizer drill bit
Client: Weather ford Pakistan
Job description: Performed Ultrasonic testing (UT).
 Project: Life assessment of LGO Hydrotreator Reactors, Naphtha Hydrotreator and
Plate forming Reactors
Client: Byco Oil Pakistan Limited
Job description: Performed Ultrasonic testing (UT).WFMPI, DPT
 Project: TURNAROUND ACTIVITIES 2011
Client: ENI Pakistan (Bhit Gas Field)
Job description: Performed Ultrasonic testing (UT).WFMPI, DPT
 Project: Construction of Storage Tank
Job description: Performed Ultrasonic testing (UT) of base plates
 Project: Construction of Loop lines
Job description: Performed Ultrasonic testing (UT) of loop lines
3/6

 Project: Installation of Compressor at Qadir Pur gas plant
Client: Oil & Gas Development Corporation (OGDCL)
Job description: Performed Radiographic Testing (RT),
 Project: Steel Plant Fabrication
Client: Aaisa Steel
Job description: Performed Radiographic Testing (RT), Ultrasonic testing (UT)
 Project: Maintenance of Hrbour Mobile Crane
Client: Karachi Port Trust (KPT)
Job description: Performed Ultrasonic Testing
Professional Experience:
(March-1998 to Till date- 16 years)
Full Time Job
Feb 2000 – Continue Peoples Steel Mills Limited. Manghopir, KHI
• Working as Assistant Manger (Incharge NDT Section) in Quality Assurance and
Development.
 Current Responsibilities
(1.) Incharge NDT section
• Communicate NDT results to other sections & customers/ Clients
• Manage & monitor Project activities at client sites.
• Correspondence with suppliers & customers
• Arrange NDT consumables and Accessories.
• Establish Procedures and work guide lines.
• Make technical / commercial documents for bids.
• Coordinate with regularities bodies Like PNRA (Pakistan Nuclear Regulatory Authority).
• Manage manpower according to work load.
• Maintain the documentation of the section as per ISO-9001: 2008 requirements
(a) Radiographic Testing (RT)
• Perform and monitor Radiographic Testing (RT) on Pressure Vessels, columns,
welded Plates & Pipe lines.
• Well use of x-ray machines and gamma ray Source (Ir-192).
• Working on directional and panoramic x-ray machines. (300Kv &160Kv)
• Well know how about Radiographic Technique & development of films.
• Well Know how of different International Standards for Radiographic Testing such
as ASME Boiler & Pressure Vessel Code, API, ASTM Standards.
(b) Ultrasonic Testing (UT)
• Perform and monitor ultrasonic Testing (UT) on Pressure Vessels, columns, welded
Plates, Pipes, Rolled, Forged, and Cast Products.
• Well use of ultrasonic flow detector model No USM25S & USM 35 x (GE-Germany) ,
TUD 201 (Time Corporation-China) .Epoch LT (Olympus-USA).
• Use of Advance ultrasonic testing equipments for Time of Flight Diffraction (TOFD)
and Phased Array (PA) (omni MX & Omni MX2)
4/6

• Measurements of thickness through thickness gauge TI-CMXDL (CHECK-LINE,
USA). DMS 4 (Make GE-Germany) & T-Gage IV (Sonatest, England)
• Well use of ultrasonic editing / evaluation software’s (Ultra doc, Omni PC,Tomoview
2.10 R19)
• Well Know how of different International Standards for UT (ASME Pressure Vessel
Code, ASTM & API Standards).
(c) Magnetic Particle Testing (MT)
• Perform and monitor Magnetic Practical Testing (MT) on Rolled, Forged Cast
product, Pipe Line and Welds.
• Well Use of bench type MPT machines Model No. BCD-3000 (Make Johnson &
Allien, England).
• Well use of AC yoke, DC yoke, permanent Magnate.
• Well know how of different International Standards for MT such as ASTM. ASME
(d) Dye Penetrant Testing (PT)
• Perform and monitor Dye Penetrant Testing (PT) on Castings, Pipe lines, welding
and Forged, Rolled and Machined product.
• Perform both type (Visible and Florescent) Dye Panetrant.
• Well know how of different International Standards for PT.
(e) Positive Material Identification (PMI)
• Perform MPI through portable XRF analyzer (Alpha series-Innov-x system).
(f) Portable Hardness Testing
• Perform Hardness testing through portable hardness tester.(HT-1000A, G & R
Technology, USA)
Full Time Job
March 1998 to feb 2000 Transmission Engineering Industries Limited. Hub Blochistan
Worked as a Quality Control Supervisor.
Responsibilities were:
• Performed online inspection.
• Performed final inspection.
• Development and design the route of new product.
• Performed calibration of measuring instruments.
Personal Details:
Date of Birth: 15th
March 1979.
Father’s Name: Maqbool Ahmed.
N.I.C. #: 44206-2372602-1
Passport # BF5576022
Marital Status Married
Reference:
References will be furnished on demand.
5/6

�ݺ�ߣ

Muhammad Sajid (CV)

Recommended

More Related Content

What's hot (20)

Viewers also liked (9)

Similar to Muhammad Sajid (CV) (20)

Muhammad Sajid (CV)