More Related Content
What's hot (18)
Similar to Organisational Capacity (20)
Organisational Capacity
- 1. ORGANISATION & CAPABILITIES Austral Drilling Services Pty Ltd began operations in 1995 to fill a growing need in the market for a quality water drilling service to the commercial sector. Our aim has always been to provide a professional service to our customers with an open and flexible approach to contractual matters. We are a fully Western Australian owned and operated company specialising in all facets of groundwater exploration, development, management and protection as well as geotechnical investigations. With four of our drillers being ADIA Class 3 certified with over 120 years of combined drilling experience, we have a wealth of specialised water well drilling experience and possess the skills and capability to perform projects to 1500 metres through all ranges of environmental media. Austral has an excellent reputation for successfully undertaking a wide range of projects with highly experienced support personnel, both in the office and in the field, to ensure successfully and timely completion of all projects. HSEQ Management Austral Drilling Services (ADS) is committed to providing and maintaining a safe work environment and safe systems of work for its employees. The health and safety of our people in the workplace is a priority. ADS will take all reasonable steps to identify, assess and control workplace hazards affecting the environment and our employees. Through consistent and practical application of our policies and the establishment of measurable objectives and targets, we aim to continually improve our performance with focus on the elimination of all work related injuries and illness and minimisation of risks to our employees, the environment and assets. We strive to achieve and sustain a Zero Injury Work Force. ADSs HSEQ Management System is aligned with AS4801, ISO14001 and ISO9001. Austral Drilling Services Policies Health & Safety Fitness For Work Environmental Indigenous Peoples Policy Quality Equal Employment Opportunity 16 Boulder Road Malaga Western Australia 6090 PH: 08 9209 2126 FAX: 08 9209 2128 Managing Director Mick Bonacchi 0417 932 944 mick@austaldrilling. com.au Manager Dean Singleton 0429 774 089 dean@austaldrilling. com.au Operations Manager Tony Bonacchi 0417 964 701 tony@austaldrilling. com.au HSEQ Manager Rosa Hogan 0422 889 327 rosa@austaldrilling. com.au Site Supervisor Glenn Bonacchi 0405 143 673 glenn@australdrilling. com.au For more information please refer to our HSEQ Management plan available upon request
- 2. DRILLING CAPACITY We have the capacity to drill to depths of greater than 1500m in all formations. Mud rotary and high pressure air rotary techniques are the main stay of our business and regularly drill deep water wells for mining companies and government departments. We also specialise in deep artesian well drilling, having drilled some of the highest head bores in Australia. We operate top of the range large water rigs with numerous advanced safety features. 8x8 wheel truck mounted top head drive rigs with on board 1250cfm and 900cfm x 350psi compressors, Injection pumps, mud pump and hydraulic auxiliary power outlets to run shear mixers, padd le tanks and hydraulic piston grout pumps. Drilling Pumps We own and operate genuine positive displacement drilling mud pumps. Gardner Denver duplex and triplex mud pumps up to 3000lpm and 10,000 PSI Mud Mixing, Conditioning and Grout Mixing Equipment We have our own design mixing tanks incorporating shear mixer for fast efficient mixing of large volumes of mud and grout. We are able to mix up to 16000 ltrs of mud in 20 minutes, provided we have a water source close by. Grout mixing and pumping is carried out as a continuous one shot process, where stop start grout pumping is avoided and much of the risk eliminated. We are able to mix and continuously pump up to 21 m3 of grout per hour. Grout Pumps We own and operate genuine positive displacement grout pumps Armstrong AMCI 5 hydraulic piston 1000 PSI x 300 L/M Gardener Denver 4x 6 up to 600 PSI x 400 L/M
- 3. Drill Rigs All drill rigs within our fleet are multipurpose with the capabilities of Air Core, Mud Rotary, Advanced Casing, Air Rotary, RC and Conventional Hammer meaning less equipment being required on site to complete a diverse drilling programme saving time and money. Down Hole Equipment We design all of our own bottom hole assemblies and have them manufactured to API specifications. We currently have bits, stabilizers and collars to drill up to 36 diameter. Alternate sizes are drawn up as required and locally manufactured within two weeks of order. All of our drill pipe is to API standards. Ancillary Equipment We own and operate a range of: 4 x Single unit air-conditioned caravans Ablutions Generators Kitchens Potable water and sullage tanks Auxiliary compressors 900 cfm x 350 PSI Sullair with hydraulic jack legs Electric submersible test pumping units Portable diesel welders All-wheel Drive Backhoes Trailers Mine specification rigs fitted with rod handling system and reload cartriges Full self-sufficient camp and messing facilities complete with incinerator toilets Jack up rod and equipment sloops for faster site set up with minimal manual handling and lifting Support Vehicles We own and operate a range of M.A.N. Volvo, Hino and IVECO support trucks. Our vehicles are fully mine site compliant, insured and fully maintained: Support trucks are all 8 wheel and 8x8 wheel flat tray units complete with vehicle loading cranes. Cranes are regularly inspected and have annual compliance certificates. Operators are certified to Worksafe CV and CN for self loading vehicle cranes. Light vehicles are Toyota Landcruiser 4WD utilities and are set up as crew transport and mechanical support vehicles. Each are equipped with a 600lt fuel transfer tank, 2-way radio, Iridium satellite phones complete with horn and beacon alarms.
- 4. Investigation We own and operate investigation drilling rigs, which enable water quality analysis, salinity profiling, and yield indications to be obtained prior to expending large resources on the installation of production bores. Grain size analysis of samples obtained during investigation drilling facilitates the generation of precise and efficient production bore designs including customizing of screens and construction materials to minimize sand pumping, maximize bore life and reduce long term bore maintenance. Specialised Aircore Investigation We have developed a large diameter Aircore system that allows for accurate sampling in unconsolidated and paleo channel formations. The system was first designed by our Director, Mick Bonacchi, during his time as Drilling Supervisor to the Water Authority. The need for a quick, accurate and cost effective method for identifying prospective production bore locations in the Gascoyne during the 1980s resulted in Commonwealth R&D funds being made available to the Drilling and Testing group. From this initial funding, Mick was able to design and have built the first Aircore system of its kind which was trialed and used successfully during the early 1990s. Since starting Austral Drilling Services in 1995, Mick has re-designed and refined the system to what we use today and has proven that it is the most effective Aircore system of its kind. It has proven immensely popular in ground water exploration projects where the investigation holes are completed as 50mm ID monitoring wells where the casing is placed through the inner tube before the drill pipe is withdrawn ensuring the completed casing and screens are set to the exact design depths. SPECIALISED SERVICES Austral Drilling Services Pty Ltd provide technical services for groundwater supply projects from drilling, testing and bore construction to turn key supply contracts where a fixed fee is charged for delivery of water to the surface. Our services include: Catchment cyclone for sampling Specialised Aircore Rods Core Samples Specialised drill bit to allow 50mm PVC to pass through
- 5. Dual Rotary Casing Advanced Drilling We operate dual rotary casing advancement systems in 8 to 14 diameters (other sizes on request) that are used to case through difficult cavernous and lost circulation formations. This system is particularly suited to drilling formations such as the channel iron deposits and river alluvials that cannot be drilled with standard air and mud methods. Method The casing shoe is welded to the casing. The pilot bit and ring bit are locked together by the bayonet coupling. Together they drill a hole large enough to allow the casing to be pulled into the hole. The pilot bit and ring bit rotate with the drill string while the casing shoe and casing do not rotate. After completing the hole, the pilot bit is unlocked by a slight reverse rotation of the drill string. The drill string and pilot bit are then retrieved through the casing. Artesian We specialise in large diameter, artesian water bores and are arguably the most experienced high artesian pressure drilling company in Western Australia. We have carried out some of the most difficult pressurised aquifer bore completions ever undertaken in WA, with heads of 50m and flows exceeding 200 L/sec. We have 4 class 3 artesian drillers in our ranks with more than 100 years of combined expertise and have drilled dozens of artesian bores in the West Canning and Carnarvon Basins. These environments contain extremely complex challenges and the possibility of a lost bore is very real. A lost bore in these situations could mean a very difficult and costly recovery operation to bring the bore back under control and repair damage to environment and property. We have developed unique drilling methods for combatting the wide range of issues presented by this type of work. From thixotropic mud systems for lost circulation to placement of balanced grout tables as temporary protection of an aquifer during casing grouting operations. Artesian wells often have both lost circulation and flowing conditions from different zones within a well, we have refined a balanced mud system that addresses both issues and allows us to drill deeper and bring in wells that produce far more water than other contractors using standard methods. Mud Management This system works by removing the cutting from the drill mud, re-circulating the mud, cleaning and processing it for use back down the bore hole. Cuttings are discarded into skip bins for approved disposals. The benefits of this system include minimised ground disturbance in sensitive areas, smaller footprint, decreased water usage during drilling, faster site rehabilitation, faster setup times and cost savings in mud. Mud Puppy- DTH Mud Recycling Unit- MODEL:TD2011 L041 De-sander units
- 6. Test Pumping & Bore Management We undertake testing of new or existing bores, using a wide range of pumps and measuring equipment capable of supplies up to 50 litres/second. Appropriate pumping rates for bores and long term sustainable bore yields can be accurately determined. The effects of pumping can be predicted using our computer modelling packages, these predictions can be integrated into management plans and practices. Down-hole video is available to determine the current status of an existing bore or to assist in bore maintenance. Hydrogeological Consultancy We have Hydrogeologists on call for the design of water drilling programs, analysis of raw data and Groundwater modelling. Our Hydrogeological team have successfully and safely carried out projects in locations throughout Western Australia including some of the harshest and most difficult landscapes the state can offer. We can manage and carry out: Geological Target Definition Geophysical Surveying Drilling and Test Pumping Resource Estimation Borefield Design Consultation Borefield Operating Strategies
- 7. PERSONEL Our key drilling personnel display strong backgrounds in Western Australian groundwater conditions and offer a diverse range of professional and practical skills. Our core management team also possess a range of authoritative management expertise and knowledge. All personnel have an excellent work ethic and lend a common sense, ingenuitive approach to work undertaken while striving to ensure the timely and cost effective completion of all projects. A summary of key personnel experience is listed below with full curriculum vitals available on request. Mick Bonacchi - Managing Director (Class 3 - WA Water Well Drillers Licence) Mick is the founding owner of Austral Drilling Services and has been in the drilling industry for over 35 years, working as a Driller for the Public Works Department, Water Authority, Wallis Drilling and Maersk Offshore. He held the position of Senior Drilling Supervisor/Operations Manager for the WA Water Corporation from 1988 until 1995 when he left to form Austral Drilling Services Pty Ltd. He has successfully completed many challenging water drilling programs for mining companies throughout the state and for major town water supplies, minor service bores for construction work and monitoring bores. He has also been responsible for the drilling and installation of bores at most Aboriginal communities throughout Western Australia. In addition to being the Project Manager for many major water drilling projects in Western Australia and has also designed bores for many of the Hydro Geological Consultants in WA and has an invaluable and extensive knowledge of drilling conditions state-wide. Michael holds a Class 3 Water Well Drillers License, and has extensive experience in all facets of drilling including rotary air, mud and downhole hammer. Tony Bonacchi - Operations Manager (Class 3 - WA Water Well Drillers Licence and Cert IV in Drilling Operations). Tony currently holds the position of Operations Manager at Austral Drilling Services. His experience spans over 30 years within the Water drilling and exploration industry with extensive knowledge in rotary, air and mud, down hole hammer and auger drilling including SPT, TWT sampling, diamond drilling, aircore, vibro core and other methods. This role requires Tony to manage, coordinate and schedule current and future projects, liaise with a diverse range of clientele including but not limited to mining companies, government agencies, stakeholders, traditional land owners, community elders, geologists and hydro consultants. Tony continues to stay current with safety and industry standards. Tony is well regarded with the drilling industry often consulting in drilling and construction methods to both clients and subcontractors. Glenn Bonacchi - Drilling Supervisor (Class 3 - WA Water Well Drillers Licence and Cert IV in Drilling Operations). Glenn has been in the drilling industry for 19 years. Glenn has a wide range of drilling experience and has been Driller in-charge on many drilling projects throughout WA for Mining Companies and Government Agencies. Glenn has extensive experience in all facets of drilling including large diameter rotary, air and mud, down-hole hammer, diamond drilling, air core, casing advancement and other methods and has drilled water bores to 800m.
- 8. Rosa Hogan Occupational Health and Safety Officer (Cert IV OH&S) Rosa has been employed at Austral Drilling Services since 2007 as Safety Officer and has been responsible for the ongoing management and development of Australs HSEQ Management System to align with AS4801, ISO14001 and ISO9001. Rosa has also been responsible for Austral successfully obtaining A Grade contractor prequalification with Water Corporation, Alcoa World Alumina Australian Operations and Worley Parsons Resources & Energy, and works closely with HS Consultants on a regular basis ensuring Australs continual improvement. Dean Singleton Office Manager (Cert IV Project Management) Dean has been in the construction industry for over 14 years working mainly in the mining industry as a superintendent and project manager with major corporations such as Rio Tinto, BHP, FMG and the Water Corporation. He has work on a diverse range of projects throughout Australia including dewatering projects, pipeline construction, reinjection borefields, tailing dams, slurry lines and bore construction to name a few. Dean is currently working closely with Rosa in managing and improving our HSEQ Management Systems Graeme Waghorn Senior Driller (Class 3 - WA Water Well Drillers Licence and Cert IV in Drilling Operations). Graeme currently holds the position of Senior Driller at Austral Drilling Services. His experience spans over 30 years within the Water drilling industry with extensive knowledge in rotary, air and mud drilling including. Graeme is arguably the most experienced deep hole water driller in the state. He has drilled extensively throughout Australia and has been involved in water drilling to 1500m depth and 36 diameter holes Julie Perhem Training development officer (Cert IV OHS, Cert IV Training and Assessing Inc. LLN Modules and Cert IV Frontline Management). Julie joined us in March 2016 and is responsible for the development, implementation and ongoing operation of Training Development and Inductions for all employees of Austral Drilling. This position also ensures all technical documents (SWIs; Company Forms) are up to date and within legislation. Julie also assists the HSEQ Manager in ensuring Austral Drilling complies with all relevant statutory and regulatory requirements that are fundamental to the management of the Austral HSEQMS.
- 9. OPERATIONAL PREMISES We have 3 premises in which we operate from, our main office is located in Malaga where the majority of our operations are coordinated. The second premises are used for overflow of production and planning with the capacity to expand our operations and work force. The third, located in Carnarvon is a base to initiate cost effective mobilisations of equipment and remote camp facilities to the northern regions of Western Australia. Equipment & Mobile Remote Camp Laydown Carnarvon Main Office 16 Boulder Rd Malaga WA 6065 Secondary Office & Workshop Landsdale
- 10. Our Clients
- 11. Our Suppliers