ºÝºÝߣ

ºÝºÝߣShare a Scribd company logo

Parts of the lathe machine

•Download as PPTX, PDF•
•
J
Jefferson Majin

The document summarizes various parts of a lathe machine. It describes the bed as the supporting surface and backbone of the lathe. The head is mounted on the left side of the bed and houses components that transmit motor movement to the axis. The tailstock supports the other end of the workpiece during machining or holds tools like drills and reamers. The longitudinal slide, also called the cross-feed slide, moves over the bed guides. The apron is located facing the operator and contains gears and clutches that transmit movement to the carriage and spindle. The lathe also includes tools like the burin for cutting and grooving, and a grafilador for finishing relief work. It can use 3-

1 of 11
Download to read offline
PARTS OFTHE LATHE MACHINE
BANCADA: It constitutes the supporting surface and the backbone of a lathe
head It is fixed on the left side of the lathe bed and on it are mounted usually the bodies responsible for transmitting the movement of the motor axis.
the Counterpoint It is used to support the other end of the workpiece during the machining, or to hold various cutting tools, such as drills, reamers and taps.
Home Shopping: It is also called longitudinal slide.This slides over the part top of the guides of the bed.
Apron: It is the part of the car that gives down, facing the operator. contains gears and clutches that transmit forward movement bolt pattern and bar cilindrar longitudinal and transverse carriage.
The Norton Safe: For rapid change of speed, it is the connecting element that transmits power between the spindle and the carriage.
BURIN: The "Burin" is a manual cutting tool with a steel tip. It serves primarily for cutting, grooving or grinding material to cold by beating undergoing the chisel with proper hammer. LatheTools
GRAFILADOR: It is a tool used for finishing relief to parts used with the hands, as a rattle or screwdrivers.
3-jaw turntable: Universal securing plates having three jaws autocentrantes moving with a single key
Plate 4 independent jaws: dishes independent in which each jaw is fitted with an input of autonomous key.

More Related Content

Parts of the lathe machine

  • 2. BANCADA: It constitutes the supporting surface and the backbone of a lathe
  • 3. head It is fixed on the left side of the lathe bed and on it are mounted usually the bodies responsible for transmitting the movement of the motor axis.
  • 4. the Counterpoint It is used to support the other end of the workpiece during the machining, or to hold various cutting tools, such as drills, reamers and taps.
  • 5. Home Shopping: It is also called longitudinal slide.This slides over the part top of the guides of the bed.
  • 6. Apron: It is the part of the car that gives down, facing the operator. contains gears and clutches that transmit forward movement bolt pattern and bar cilindrar longitudinal and transverse carriage.
  • 7. The Norton Safe: For rapid change of speed, it is the connecting element that transmits power between the spindle and the carriage.
  • 8. BURIN: The "Burin" is a manual cutting tool with a steel tip. It serves primarily for cutting, grooving or grinding material to cold by beating undergoing the chisel with proper hammer. LatheTools
  • 9. GRAFILADOR: It is a tool used for finishing relief to parts used with the hands, as a rattle or screwdrivers.
  • 10. 3-jaw turntable: Universal securing plates having three jaws autocentrantes moving with a single key
  • 11. Plate 4 independent jaws: dishes independent in which each jaw is fitted with an input of autonomous key.