際際滷

際際滷Share a Scribd company logo

Pilot Paton Plant Presentation (EN)

Pilot Paton Plant of Welding Equipment
Pilot Paton Plant of Welding Equipment

Introducing you our newest presentation, where you can find the key facts about Pilot Paton Plant - one of the leading producers of welding equipment of the CIS countries.

1 of 17
Download to read offline
www.paton.ua RELIABILITY QUALITY TRADITIONS
1 /www.paton.ua 59 YEARS OF SUCCESSFUL DEVELOPMENT, IMPLEMENTATION, AND PRODUCTION OF WELDING EQUIPMENT the innovation technologies and scientific research results, as well as constantly expanding the assortment of welding equipment! Over a long period of time, the Plant dealt with the supply of either highly specialized equipment or the serial production of transformers and other welding equipment for the domestic and foreign enterprises of different economic branches. In the 90s, the Plant independently developed and started the serial production of the most demanded transformers, rectifiers, and semiautomatic machines. In 2006, Paton Plant developed the serial production of inverting devices of manual arc welding and began to produce the welding electrodes in 2012. Today, the Plant is one of the market leaders producing the welding machines on the territory of Ukraine and CIS countries while introducing Pilot Plant of Welding Equipment of the E.O. Paton Institute of Electric Welding (Paton Plant) was founded in January of 1959 as a part of the development shop dealing with the adoption of technologies and equipment for different kinds of welding, which were developed by EWI and Experimental Design-Technological Office of the E.O. Paton Electric Welding Institute of the National Academy of Sciences of Ukraine.
"Science, not enriched by the experience of practice, is dead, but practice deprived of the achievements of science is powerless" (Eugenii Paton) Eugenii Oskarovich Paton the bridge builder, the founder of the national school of welding metals, the academician of the Academy of Sciences of the Ukrainian SSR, the Hero of Socialist Labor, the laureate of the State Prize of the USSR, the head of the bridge construction department (1904-1929), the dean of the engineering department (1906), the organizer and the head (1935-1939) of the electric welding department. In 1934 he created the Institute of Electric Welding of the Academy of Sciences of the Ukrainian SSR, which he headed until the end of his life. The founders and ideological inspirers of the plant are Evgenii Oskarovich and Boris Evgeniiovich Paton outstanding scientists in the field of welding and metallurgy. Boris Evgeniiovich Paton scientist in the field of metallurgy and metal technology, professor, doctor of technical sciences, academician, author of more than 1000 scientific works and publications, as well as more than 400 inventions. Since 1953 he is the head of the Institute of Electric Welding. Since 1962 President of the National Academy of Sciences of Ukraine. 2 /www.paton.ua
2017 commissioning of the workshop on production of bodies for welding machines equipped with the high-technology TRUMPF equipment, as well as powder coating line 2016 launching of welding electrodes of traditional formulation: ANO-21, ANO-36, ANO-4, UONI 13/45, UONI 13/55, MR-3, 丐-590, TsCh-4, TsL-11 and OZL-8 special electrodes, as well as Elite series electrodes of improved formula: Elite ANO-36, Elite MD6013, and Elite ANO-21 2015 production of the batch of tropicalized welding machines for the ship-building yard in Myanmar: VS-650SR rectifiers with BP-608 infeed filler, as well as MMA-200 inverters 2015 start of production of the fully-digital welding inverters of MMA Professional series, as well as MIG/MAG-250S and MIG/MAG-250 semiautomatic machines with the new control panel board and parameters numerical management 2014 production of unique complex of welding equipment for automatic solvent sealing arc welding (girth seams in deep cutting) of rotors of high power turbines for Turboatom OJSC 2013 serial export of inverting welding machines to Georgia, Moldova, and Azerbaijan 2010 commissioning of new samples of inverting sources of manual arc welding (MMA), argon arc welding (TIG) and semiautomatic welding (MIG/MAG) 2009 50th anniversary of the Plant; Plants veterans are awarded with the diplomas of Ukrainian government and Kiev municipal administration 2004 presentation of the first inverter machine called MMA-160 2004 the equipment produced by the Plant is named after the founder of Institute of Welding (PATON) 1991 start of commercializing of STSH-type transformers of 250, 315, and 400 current, VD-type rectifiers of 250, 315 and 400 current and PS-type improved semiautomatic machines of 180, 250, and 315 current 1984 the astronauts Svetlana Savitskaya and Vladimir Dzhanibekov were first in the world who successfully performed the operations on the metal cutting, welding, soldering and spraying with the help of URI electron-beam unit on the space station complex known as SALIUT-7 1981 launch of the unique equipment for Khartsyzk and Vyksa Pipe Plants 1974 the quality marks are firstly assigned for STSH-250 transformer, VMG-5000 rectifier and 1114 semiautomatic machine in the system of Academy of Sciences of the Ukrainian Soviet Socialist Republic 1974 production of the first sample of unique and powerful -700 intratubal machine for the electrical resistance welding of oil and gas pipelines in the North environmental conditions 1973 start of the serial production of VMG-5000 multioperator rectifier for welding in the conditions with 弌2 1970 launch of welding units for VAZ and KAMAZ 1969 development and launch of special machines and units for the electrical resistance and overlay welding 1968 start of serial production of small-size welding transformer called STSH-250 1959 E.O. Paton Pilot Plant of Welding Equipment of the Electric Welding Institute was created in January, 1 KEY DATES OF THE PLANT HISTORY
59 years on the market of welding equipment Unblemished reputation Domestic facilities in Ukraine Profitable and clear cooperation conditions Professional technical and advisory support of clients Processing of the newest technologies and researches 5 year equipment warranty Exclusive use of high-quality parts and components Full compliance of declared characteristics with the actual ones Low power consumption and small size Unique multifunctional performance and ease of use Loyal terms of service maintenance Advanced formula for the comfortable welding Improved security of welder health High performance and environmental friendliness Wide range of interaction with the metals BENEFITS OF WORKING WITH US BENEFITS OF PATON PLANT: ADVANTAGES OF PATON WELDING EQUIPMENT: ADVANTAGES OF PATON WELDING ELECTRODES: 4 /www.paton.ua
PRODUCTION DYNAMICS The Plant has considerably increased production of all categories of main products over the last 5 years 59-year experience at the market 350 people are at the manufac足 turing site 50 000 welding machines per year 10 million USD of investment for the last 3 years 5-year equipment warranty 20 countries of direct products export 10 000 tons of electrodes per year 5 000 m2 of workshops and production facilities 5 /www.paton.ua count 10 000 20 000 30 000 40 000 50 000 60 000 2013 2014 2015 20172016 5 200 pcs. 50000pcs. 10-fold increaseINVERTER EQUIPMENT count 500 1 000 1 500 2 000 2 500 3 000 2013 2014 2015 20172016 1 950 pcs. 2 500 pcs. %30growth CLASSIC EQUIPMENT 2015 2016 2017 1500 10 000 tons 2 000 3 000 4 000 5 000 6 000 7 000 7-fold increaseWELDING ELECTRODES
OWN PRODUCTION 6 /www.paton.ua All welding equipment and electrodes of PATON are produced in Ukraine within own plant facilities while involving more than 300 highly qualified specialists every day as well as ensuring the orders for more than 70 Ukrainian partner enterprises, which provide the raw materials, components, and services.
Approximately 80% of all welding works preformed in the course of industrial connections welding are carried out by means of arc welding. However, the large currents necessary for the welding are received not from the ordinary current transformer but from the more reliable and high-technology machine, i.e. welding inverter. Paton Plant produces the wide range of inverter rectifiers to solve any tasks. 4 series: MINI, ECO, Standard, Professional Welding currents: from 150 to 315 Mains voltage: 220V/380V 2 series: Standard, Professional Welding currents: from 160 to 315 Mains voltage: 220V/380V 2 series: Standard, Professional Welding current: from 5 to 200 Mains voltage: 220V Cutting current: from 2 to 40 Cutting thickness: up to 8 mm Mains voltage: 220V The inverter semiautomatic machines of PATON possess the number of advantages such as all-digital control mode, safe metal wire feeder unit, numerous auxiliary functions, as well as possibility to use the burners of all types because of available CEE plug. The inverter semiautomatic machines are of Standard and Professional series thus providing an opportunity to select the optimal model due to the user needs. The argon arc welding machine is designed to weld the parts from the stainless and alloy steel, as well as aluminum- magnesium alloys while ensuring the reliability and longevity of welding joints. Considering such wide spectrum of possibilities, the welding argon arc machines of PATON are used in the aircraft industry, shipbuilding, medicine, automotive industry and other branches. The plasma cutting ensures the high-class productivity, opportunity to work with the different metals, the high accuracy and safety. Moreover, the plasma cutting guarantees the more qualitative cut without overheating, rush and fen drossing. Thus, the cut doesnt require the additional processing. In such a case, just cut area is mainly influenced by the basic thermal effect so that the metal is hardly subject to the thermal deformation. PATON PRI- 40S plasma cutter allows the replacing of inefficient and dangerous angle grinder. INVERTER EQUIPMENT Today the Plant produces more than 20 models of inverter welding equipment. The functionality, economical efficiency, mobility, and workability are those features, which distinguish PATON equipment and give us a handle to be proud of our work. 7 /www.paton.ua INVERTER RECTIFIERS INVERTER SEMIAUTOMATIC MACHINES ARGON ARC INVERTERS AIR PLASMA CUTTING MACHINES
8 /www.paton.ua The direct current welding is used to weld the highly sensitive pieces requiring the special-quality welding connection. PATON classic rectifiers operate from the conventional welding current ranging from 310A to 500A being used for the manual arc welding, cutting and overlaying of the metal structures and parts, particularly in the supersevere working conditions such as metallurgic, ore mining, chemical industry, as well as under field conditions when performing the assembly and repair works on the oil and gas pipes. The special transformers are used as the power sources when performing the alternating current welding works. The professional welding transformers produced by PATON operate from the conventional welding current of 315A and 400A being equipped with the welding arc burn stabilizer. They are meant for the manual arc welding of carbon steels and various aluminium alloys. The distinctive feature of these transformers consists in the possibility to smoothly control the welding current with the help of movable magnetic shunt. The classic automatic machines or self- powered welding heads are considered to be irreplaceable when welding the highly sensitive structures. Our self-powered welding heads are intended for the high-production submerged arc welding of drawing fillet. PATON automatic machines are high-duty ones because the module that controls the welding process is designed on the modern element base thus ensuring the accurate control of preset parameters. The automatic machine provides an opportunity to perform the welding operations in three different modes without stopping the welding process. The multioperator power sources are irreplaceable in the course of substantial construction, as well as when performing the welding operations in the supersevere conditions (open-cuts, mines, pipeline routes). We offer the wide range of equipment for the multiple-operator welding: rectifiers with the magnetic or electronic control, as well as the reliable time-proved ballast resistors produced by PATON. CLASSIC RECTIFIERS CLASSIC TRANSFORMERS CLASSIC AUTOMATIC MACHINES MULTIOPERATOR POWER SOURCES CLASSIC EQUIPMENT More than 15 models of PATON welding equipment of classic type, which are produced by Paton Plant today, are the embodiment of advanced engineering supported by the decades of Plant experience in solving the biggest challenges.
9 /www.paton.ua PATON ELECTRODES PATON welding electrodes are designed together with the specialists of E.O. Paton Institute of Electric Welding while following the requirements of GOST standards. Moreover, they are certified for the sale either in Ukraine or on the markets of European and Asian countries. ANO-21 3|4|5 2,5|5Elit ANO-36 2|3|4|5 1|2,5|5 丐-590 4|5 5 3|4 1CL-11 3|4 1CCH-4 2|3|4|5 1|2,5|5Elit ANO-21 3|4|5 1|2,5|5ANO-36 3 1OZL-8 3|4 1|2,5|5Elit MD6013 3|4|5 2,5|5ANO-4 3|4|5 2,5|5UONI-13/55 3|4|5 2,5|5-3 WELDINGOFCARBONAND LOW-ALLOYEDSTEEL (DUE TO IMPROVED FORMULA) WELDINGOFCARBONAND LOW-ALLOYEDSTEEL (DUE TO CLASSIC FORMULA) WELDING OF HIGHLY ALLOYED STEEL WELDING OF CAST IRON OVERLAYING
Development of new methods, technologies, and equipment for the deep-water and ground welding and cutting, which are demanded by companies dealing with the oil and gas recovery on the ocean shelve (SOCAR Company, Azerbaijan). 2011 Development of the technology for separation of metal structure elements through the directed explosion when building the offshore fixed platform (SOCAR Company, Azerbaijan)2014 Development and production of welding equipment for the electric slag welding of pieces with the thickness of up to 200 mm (ASH115 device with VDU-1202 welding rectifier) and 450 mm (-535 rail-track welding machine completed with TSHS-1000-3 welding transformer) for the machine-building plant. 2016 Production of the unique complex of equipment for the automatic submerged arc welding of girth seams to the deep cutting of rotors of high-power turbines for Turboatom OJSC.2014 Development and production of the batch of welding equipment with the advanced characteristics and reliability meant for the tropical climate (VS-650 弌 welding rectifiers completed with BP-608 feeding blocks, MMA-200 inverting rectifiers) for one of the ship-repair yards in Myanmar 2015 SPECIAL-PURPOSE EQUIPMENT Throughout its long history, Paton Plant has performed and successfully continues to perform the projects on the production of special-purpose welding equipment for the different economical branches of various world countries still staying the main base for the implementation of researches of Experimental Design-Technological Office and the E.O. Paton Electric Welding Institute. The Plant realized the following projects on the development and production of equipment over the last years: 10 /www.paton.ua
METALWORK SERVICES We provide our clients with the wide range of metalwork services and metal products painting. The operations are performed by the highly trained specialists with the help of advanced TRUMPF equipment and high-quality expandable materials supplied by the world leaders. 11 /www.paton.ua Works on the high-accuracy automated radial sheet metal forming with the segments from 35属 to 179属 to produce the metal furniture, advertising and engineering structures, shop and other equipment. The Plant specialists professionally perform the complex of works on the following types of metal working: turning and milling operations, polishing, drilling. We offer the qualitative services of powder coating of metal products, as well as of metal and aluminium sections which are performed by the experienced Plant specialists with the help of newest premium- class equipmentELECTRON. Welding of pieces from aluminium and stainless steel performed by the highly trained specialists who work on the Plant by means of the professional equipment. SHEETMETAL FOLDING MECHANICAL METAL WORKING Works on the cutting and forming of sheet metal of up to 2 500 x 1 250 mm with the thickness of 0.5-3 mm. SHEET METAL CUTTING The Plant offers services for automated high-precision metalworking (with positioning accuracy up to 0.005 mm) on ultramodern CNC turning and milling equipment from the leading manufacturer Abplanalp. AUTOMATED HIGH PRECISION METALWORKING POWDER COATING ARGON ARC WELDING OF ALU足 MINIUM AND STAINLESS STEEL
RUSSIAESTONIA LATVIA BELARUS POLAND SLOVAKIA HUNGARY MOLDOVA ROMANIA UKRAINE TURKEY EQUATORIAL GUINEA UZBEKISTAN MYANMAR SOUTH KOREA KAZAKHSTAN ARMENIA AZERBAIJAN GEORGIA BULGARIA CZECH REPUBLIC LITHUANIA 12 /www.paton.ua EXPORT GEOGRAPHY In 2013, Paton Plant began to regularly export the welding equipment and materials to the foreign markets. As on 2017, PATON products are delivered to 20 countries all over the world. Over the incomplete 5 years, more than 30 000 units of welding equipment and more than 5 000 tons of electrodes were sold on the outside market. Thanks to its inno足vati足 veness, perfect quality of assembly and high working reliability, the products of Paton Plant continues to successfully conquer the foreign markets being highly demanded in professional circles! Azerbaijan Armenia Belarus Bulgaria Hungary Georgia Kazakhstan Latvia Lithuania Moldova Myanmar Poland Romania Slovakia Turkey Uzbekistan Czech Republic Estonia Eq. Guinea South Korea
For the years of its operation, Paton Plant proved to be the reliable manufacturer of welding equipment and electrodes. It is no wonder that today the products produced by PATON are widely used by the enterprises which are the leaders of different branches of Ukrainian economy. OUR CLIENTS We appreciate every client and value the opportunity for cooperation with everyone starting from the private parties who solve the common tasks and ending with the enterprises which are the economy giants. 13 /www.paton.ua
Mutually profitable partnership is a basis of successful business! OUR PARTNERS 14 /www.paton.ua DISTRIBUTION NETWORKS ONLINE SHOPS COMPONENT INDUSTRIES When producing its products and delivering them to the end consumer, Paton Plant cooperates with the companies, which are leaders in their fields and proved their competence and reliability by many years of successful work in the corresponding areas.
OUR CERTIFICATES The products manufactured by Paton Plant meet all requirements to the welding equipment and electrodes, as well as regularly undergo the certification by the corresponding Ukrainian and international certification centers. 15 /www.paton.ua RELIABILITY QUALITY TRADITIONS
www.paton.ua Main office sales department: 66, Novopyrogivska St., Kyiv, Ukraine, 03045 tel.: +38 044 259 40 00 email: office@paton.ua Brand store: 66, Novopyrogivska St., Kyiv, Ukraine, 03045 tel.: +38 044 227 34 14 email: dealer@paton.ua CONTACT US Still have some questions? We are always ready to provide all necessary information about our products and cooperation conditions! RELIABILITY QUALITY TRADITIONS

More Related Content

Pilot Paton Plant Presentation (EN)

  • 2. 1 /www.paton.ua 59 YEARS OF SUCCESSFUL DEVELOPMENT, IMPLEMENTATION, AND PRODUCTION OF WELDING EQUIPMENT the innovation technologies and scientific research results, as well as constantly expanding the assortment of welding equipment! Over a long period of time, the Plant dealt with the supply of either highly specialized equipment or the serial production of transformers and other welding equipment for the domestic and foreign enterprises of different economic branches. In the 90s, the Plant independently developed and started the serial production of the most demanded transformers, rectifiers, and semiautomatic machines. In 2006, Paton Plant developed the serial production of inverting devices of manual arc welding and began to produce the welding electrodes in 2012. Today, the Plant is one of the market leaders producing the welding machines on the territory of Ukraine and CIS countries while introducing Pilot Plant of Welding Equipment of the E.O. Paton Institute of Electric Welding (Paton Plant) was founded in January of 1959 as a part of the development shop dealing with the adoption of technologies and equipment for different kinds of welding, which were developed by EWI and Experimental Design-Technological Office of the E.O. Paton Electric Welding Institute of the National Academy of Sciences of Ukraine.
  • 3. "Science, not enriched by the experience of practice, is dead, but practice deprived of the achievements of science is powerless" (Eugenii Paton) Eugenii Oskarovich Paton the bridge builder, the founder of the national school of welding metals, the academician of the Academy of Sciences of the Ukrainian SSR, the Hero of Socialist Labor, the laureate of the State Prize of the USSR, the head of the bridge construction department (1904-1929), the dean of the engineering department (1906), the organizer and the head (1935-1939) of the electric welding department. In 1934 he created the Institute of Electric Welding of the Academy of Sciences of the Ukrainian SSR, which he headed until the end of his life. The founders and ideological inspirers of the plant are Evgenii Oskarovich and Boris Evgeniiovich Paton outstanding scientists in the field of welding and metallurgy. Boris Evgeniiovich Paton scientist in the field of metallurgy and metal technology, professor, doctor of technical sciences, academician, author of more than 1000 scientific works and publications, as well as more than 400 inventions. Since 1953 he is the head of the Institute of Electric Welding. Since 1962 President of the National Academy of Sciences of Ukraine. 2 /www.paton.ua
  • 4. 2017 commissioning of the workshop on production of bodies for welding machines equipped with the high-technology TRUMPF equipment, as well as powder coating line 2016 launching of welding electrodes of traditional formulation: ANO-21, ANO-36, ANO-4, UONI 13/45, UONI 13/55, MR-3, 丐-590, TsCh-4, TsL-11 and OZL-8 special electrodes, as well as Elite series electrodes of improved formula: Elite ANO-36, Elite MD6013, and Elite ANO-21 2015 production of the batch of tropicalized welding machines for the ship-building yard in Myanmar: VS-650SR rectifiers with BP-608 infeed filler, as well as MMA-200 inverters 2015 start of production of the fully-digital welding inverters of MMA Professional series, as well as MIG/MAG-250S and MIG/MAG-250 semiautomatic machines with the new control panel board and parameters numerical management 2014 production of unique complex of welding equipment for automatic solvent sealing arc welding (girth seams in deep cutting) of rotors of high power turbines for Turboatom OJSC 2013 serial export of inverting welding machines to Georgia, Moldova, and Azerbaijan 2010 commissioning of new samples of inverting sources of manual arc welding (MMA), argon arc welding (TIG) and semiautomatic welding (MIG/MAG) 2009 50th anniversary of the Plant; Plants veterans are awarded with the diplomas of Ukrainian government and Kiev municipal administration 2004 presentation of the first inverter machine called MMA-160 2004 the equipment produced by the Plant is named after the founder of Institute of Welding (PATON) 1991 start of commercializing of STSH-type transformers of 250, 315, and 400 current, VD-type rectifiers of 250, 315 and 400 current and PS-type improved semiautomatic machines of 180, 250, and 315 current 1984 the astronauts Svetlana Savitskaya and Vladimir Dzhanibekov were first in the world who successfully performed the operations on the metal cutting, welding, soldering and spraying with the help of URI electron-beam unit on the space station complex known as SALIUT-7 1981 launch of the unique equipment for Khartsyzk and Vyksa Pipe Plants 1974 the quality marks are firstly assigned for STSH-250 transformer, VMG-5000 rectifier and 1114 semiautomatic machine in the system of Academy of Sciences of the Ukrainian Soviet Socialist Republic 1974 production of the first sample of unique and powerful -700 intratubal machine for the electrical resistance welding of oil and gas pipelines in the North environmental conditions 1973 start of the serial production of VMG-5000 multioperator rectifier for welding in the conditions with 弌2 1970 launch of welding units for VAZ and KAMAZ 1969 development and launch of special machines and units for the electrical resistance and overlay welding 1968 start of serial production of small-size welding transformer called STSH-250 1959 E.O. Paton Pilot Plant of Welding Equipment of the Electric Welding Institute was created in January, 1 KEY DATES OF THE PLANT HISTORY
  • 5. 59 years on the market of welding equipment Unblemished reputation Domestic facilities in Ukraine Profitable and clear cooperation conditions Professional technical and advisory support of clients Processing of the newest technologies and researches 5 year equipment warranty Exclusive use of high-quality parts and components Full compliance of declared characteristics with the actual ones Low power consumption and small size Unique multifunctional performance and ease of use Loyal terms of service maintenance Advanced formula for the comfortable welding Improved security of welder health High performance and environmental friendliness Wide range of interaction with the metals BENEFITS OF WORKING WITH US BENEFITS OF PATON PLANT: ADVANTAGES OF PATON WELDING EQUIPMENT: ADVANTAGES OF PATON WELDING ELECTRODES: 4 /www.paton.ua
  • 6. PRODUCTION DYNAMICS The Plant has considerably increased production of all categories of main products over the last 5 years 59-year experience at the market 350 people are at the manufac足 turing site 50 000 welding machines per year 10 million USD of investment for the last 3 years 5-year equipment warranty 20 countries of direct products export 10 000 tons of electrodes per year 5 000 m2 of workshops and production facilities 5 /www.paton.ua count 10 000 20 000 30 000 40 000 50 000 60 000 2013 2014 2015 20172016 5 200 pcs. 50000pcs. 10-fold increaseINVERTER EQUIPMENT count 500 1 000 1 500 2 000 2 500 3 000 2013 2014 2015 20172016 1 950 pcs. 2 500 pcs. %30growth CLASSIC EQUIPMENT 2015 2016 2017 1500 10 000 tons 2 000 3 000 4 000 5 000 6 000 7 000 7-fold increaseWELDING ELECTRODES
  • 7. OWN PRODUCTION 6 /www.paton.ua All welding equipment and electrodes of PATON are produced in Ukraine within own plant facilities while involving more than 300 highly qualified specialists every day as well as ensuring the orders for more than 70 Ukrainian partner enterprises, which provide the raw materials, components, and services.
  • 8. Approximately 80% of all welding works preformed in the course of industrial connections welding are carried out by means of arc welding. However, the large currents necessary for the welding are received not from the ordinary current transformer but from the more reliable and high-technology machine, i.e. welding inverter. Paton Plant produces the wide range of inverter rectifiers to solve any tasks. 4 series: MINI, ECO, Standard, Professional Welding currents: from 150 to 315 Mains voltage: 220V/380V 2 series: Standard, Professional Welding currents: from 160 to 315 Mains voltage: 220V/380V 2 series: Standard, Professional Welding current: from 5 to 200 Mains voltage: 220V Cutting current: from 2 to 40 Cutting thickness: up to 8 mm Mains voltage: 220V The inverter semiautomatic machines of PATON possess the number of advantages such as all-digital control mode, safe metal wire feeder unit, numerous auxiliary functions, as well as possibility to use the burners of all types because of available CEE plug. The inverter semiautomatic machines are of Standard and Professional series thus providing an opportunity to select the optimal model due to the user needs. The argon arc welding machine is designed to weld the parts from the stainless and alloy steel, as well as aluminum- magnesium alloys while ensuring the reliability and longevity of welding joints. Considering such wide spectrum of possibilities, the welding argon arc machines of PATON are used in the aircraft industry, shipbuilding, medicine, automotive industry and other branches. The plasma cutting ensures the high-class productivity, opportunity to work with the different metals, the high accuracy and safety. Moreover, the plasma cutting guarantees the more qualitative cut without overheating, rush and fen drossing. Thus, the cut doesnt require the additional processing. In such a case, just cut area is mainly influenced by the basic thermal effect so that the metal is hardly subject to the thermal deformation. PATON PRI- 40S plasma cutter allows the replacing of inefficient and dangerous angle grinder. INVERTER EQUIPMENT Today the Plant produces more than 20 models of inverter welding equipment. The functionality, economical efficiency, mobility, and workability are those features, which distinguish PATON equipment and give us a handle to be proud of our work. 7 /www.paton.ua INVERTER RECTIFIERS INVERTER SEMIAUTOMATIC MACHINES ARGON ARC INVERTERS AIR PLASMA CUTTING MACHINES
  • 9. 8 /www.paton.ua The direct current welding is used to weld the highly sensitive pieces requiring the special-quality welding connection. PATON classic rectifiers operate from the conventional welding current ranging from 310A to 500A being used for the manual arc welding, cutting and overlaying of the metal structures and parts, particularly in the supersevere working conditions such as metallurgic, ore mining, chemical industry, as well as under field conditions when performing the assembly and repair works on the oil and gas pipes. The special transformers are used as the power sources when performing the alternating current welding works. The professional welding transformers produced by PATON operate from the conventional welding current of 315A and 400A being equipped with the welding arc burn stabilizer. They are meant for the manual arc welding of carbon steels and various aluminium alloys. The distinctive feature of these transformers consists in the possibility to smoothly control the welding current with the help of movable magnetic shunt. The classic automatic machines or self- powered welding heads are considered to be irreplaceable when welding the highly sensitive structures. Our self-powered welding heads are intended for the high-production submerged arc welding of drawing fillet. PATON automatic machines are high-duty ones because the module that controls the welding process is designed on the modern element base thus ensuring the accurate control of preset parameters. The automatic machine provides an opportunity to perform the welding operations in three different modes without stopping the welding process. The multioperator power sources are irreplaceable in the course of substantial construction, as well as when performing the welding operations in the supersevere conditions (open-cuts, mines, pipeline routes). We offer the wide range of equipment for the multiple-operator welding: rectifiers with the magnetic or electronic control, as well as the reliable time-proved ballast resistors produced by PATON. CLASSIC RECTIFIERS CLASSIC TRANSFORMERS CLASSIC AUTOMATIC MACHINES MULTIOPERATOR POWER SOURCES CLASSIC EQUIPMENT More than 15 models of PATON welding equipment of classic type, which are produced by Paton Plant today, are the embodiment of advanced engineering supported by the decades of Plant experience in solving the biggest challenges.
  • 10. 9 /www.paton.ua PATON ELECTRODES PATON welding electrodes are designed together with the specialists of E.O. Paton Institute of Electric Welding while following the requirements of GOST standards. Moreover, they are certified for the sale either in Ukraine or on the markets of European and Asian countries. ANO-21 3|4|5 2,5|5Elit ANO-36 2|3|4|5 1|2,5|5 丐-590 4|5 5 3|4 1CL-11 3|4 1CCH-4 2|3|4|5 1|2,5|5Elit ANO-21 3|4|5 1|2,5|5ANO-36 3 1OZL-8 3|4 1|2,5|5Elit MD6013 3|4|5 2,5|5ANO-4 3|4|5 2,5|5UONI-13/55 3|4|5 2,5|5-3 WELDINGOFCARBONAND LOW-ALLOYEDSTEEL (DUE TO IMPROVED FORMULA) WELDINGOFCARBONAND LOW-ALLOYEDSTEEL (DUE TO CLASSIC FORMULA) WELDING OF HIGHLY ALLOYED STEEL WELDING OF CAST IRON OVERLAYING
  • 11. Development of new methods, technologies, and equipment for the deep-water and ground welding and cutting, which are demanded by companies dealing with the oil and gas recovery on the ocean shelve (SOCAR Company, Azerbaijan). 2011 Development of the technology for separation of metal structure elements through the directed explosion when building the offshore fixed platform (SOCAR Company, Azerbaijan)2014 Development and production of welding equipment for the electric slag welding of pieces with the thickness of up to 200 mm (ASH115 device with VDU-1202 welding rectifier) and 450 mm (-535 rail-track welding machine completed with TSHS-1000-3 welding transformer) for the machine-building plant. 2016 Production of the unique complex of equipment for the automatic submerged arc welding of girth seams to the deep cutting of rotors of high-power turbines for Turboatom OJSC.2014 Development and production of the batch of welding equipment with the advanced characteristics and reliability meant for the tropical climate (VS-650 弌 welding rectifiers completed with BP-608 feeding blocks, MMA-200 inverting rectifiers) for one of the ship-repair yards in Myanmar 2015 SPECIAL-PURPOSE EQUIPMENT Throughout its long history, Paton Plant has performed and successfully continues to perform the projects on the production of special-purpose welding equipment for the different economical branches of various world countries still staying the main base for the implementation of researches of Experimental Design-Technological Office and the E.O. Paton Electric Welding Institute. The Plant realized the following projects on the development and production of equipment over the last years: 10 /www.paton.ua
  • 12. METALWORK SERVICES We provide our clients with the wide range of metalwork services and metal products painting. The operations are performed by the highly trained specialists with the help of advanced TRUMPF equipment and high-quality expandable materials supplied by the world leaders. 11 /www.paton.ua Works on the high-accuracy automated radial sheet metal forming with the segments from 35属 to 179属 to produce the metal furniture, advertising and engineering structures, shop and other equipment. The Plant specialists professionally perform the complex of works on the following types of metal working: turning and milling operations, polishing, drilling. We offer the qualitative services of powder coating of metal products, as well as of metal and aluminium sections which are performed by the experienced Plant specialists with the help of newest premium- class equipmentELECTRON. Welding of pieces from aluminium and stainless steel performed by the highly trained specialists who work on the Plant by means of the professional equipment. SHEETMETAL FOLDING MECHANICAL METAL WORKING Works on the cutting and forming of sheet metal of up to 2 500 x 1 250 mm with the thickness of 0.5-3 mm. SHEET METAL CUTTING The Plant offers services for automated high-precision metalworking (with positioning accuracy up to 0.005 mm) on ultramodern CNC turning and milling equipment from the leading manufacturer Abplanalp. AUTOMATED HIGH PRECISION METALWORKING POWDER COATING ARGON ARC WELDING OF ALU足 MINIUM AND STAINLESS STEEL
  • 13. RUSSIAESTONIA LATVIA BELARUS POLAND SLOVAKIA HUNGARY MOLDOVA ROMANIA UKRAINE TURKEY EQUATORIAL GUINEA UZBEKISTAN MYANMAR SOUTH KOREA KAZAKHSTAN ARMENIA AZERBAIJAN GEORGIA BULGARIA CZECH REPUBLIC LITHUANIA 12 /www.paton.ua EXPORT GEOGRAPHY In 2013, Paton Plant began to regularly export the welding equipment and materials to the foreign markets. As on 2017, PATON products are delivered to 20 countries all over the world. Over the incomplete 5 years, more than 30 000 units of welding equipment and more than 5 000 tons of electrodes were sold on the outside market. Thanks to its inno足vati足 veness, perfect quality of assembly and high working reliability, the products of Paton Plant continues to successfully conquer the foreign markets being highly demanded in professional circles! Azerbaijan Armenia Belarus Bulgaria Hungary Georgia Kazakhstan Latvia Lithuania Moldova Myanmar Poland Romania Slovakia Turkey Uzbekistan Czech Republic Estonia Eq. Guinea South Korea
  • 14. For the years of its operation, Paton Plant proved to be the reliable manufacturer of welding equipment and electrodes. It is no wonder that today the products produced by PATON are widely used by the enterprises which are the leaders of different branches of Ukrainian economy. OUR CLIENTS We appreciate every client and value the opportunity for cooperation with everyone starting from the private parties who solve the common tasks and ending with the enterprises which are the economy giants. 13 /www.paton.ua
  • 15. Mutually profitable partnership is a basis of successful business! OUR PARTNERS 14 /www.paton.ua DISTRIBUTION NETWORKS ONLINE SHOPS COMPONENT INDUSTRIES When producing its products and delivering them to the end consumer, Paton Plant cooperates with the companies, which are leaders in their fields and proved their competence and reliability by many years of successful work in the corresponding areas.
  • 16. OUR CERTIFICATES The products manufactured by Paton Plant meet all requirements to the welding equipment and electrodes, as well as regularly undergo the certification by the corresponding Ukrainian and international certification centers. 15 /www.paton.ua RELIABILITY QUALITY TRADITIONS
  • 17. www.paton.ua Main office sales department: 66, Novopyrogivska St., Kyiv, Ukraine, 03045 tel.: +38 044 259 40 00 email: office@paton.ua Brand store: 66, Novopyrogivska St., Kyiv, Ukraine, 03045 tel.: +38 044 227 34 14 email: dealer@paton.ua CONTACT US Still have some questions? We are always ready to provide all necessary information about our products and cooperation conditions! RELIABILITY QUALITY TRADITIONS