Ppt on thremal power station surtgarh by ashok khoja
Download as PPT, PDF4 likes2,219 views
This document summarizes the key components of a thermal power plant, including a coal handling plant, boiler, steam turbine, and auxiliary systems. The boiler system uses a feed water system to provide water and a steam system to control the steam produced. It can use two sources of feed water: condensed steam or makeup water. The steam turbine converts the kinetic energy of steam into rotational mechanical power. Other components discussed include the deaerator, heat exchangers, super heater, condenser, and feed water heater.
1 of 16
Downloaded 245 times
Recommended
Suratgarh thermal power station
Suratgarh thermal power stationGaurav Gunjan
Ìý
Suratgarh thermal power station is the first super thermal power station in Rajasthan with a total installed capacity of 1500 MW. It is located 27 km from Suratgarh town in Ganganagar District. The power station has 6 stages totaling 1500 MW of capacity. It uses coal from local mines to power steam turbines that generate electricity, with the electricity being distributed by Rajasthan Vidhyut Utpadan Nigam Limited. The plant utilizes a steam cycle to generate power from coal.Presentation suratgarh super thermal power station by rahul dabi
Presentation suratgarh super thermal power station by rahul dabiRahul Dabi
Ìý
Suratgarh Thermal Power Plant has a total installed capacity of 1500 MW and is located 27 km from Suratgarh town in Rajasthan. It has 6 stages of 250 MW coal power generation and 2 additional under construction stages of 660 MW each. The plant uses pulverized coal from local sources which is milled and fired into boilers to produce high pressure steam. This steam powers steam turbines which drive generators to produce electricity. The plant has won several national awards for its high performance standards.suratgarh thermal power station by mk yadav
suratgarh thermal power station by mk yadavmukesh yadav
Ìý
Suratgarh Thermal Power Station is a 1500 MW coal-fired power plant located in Rajasthan, India. It has 6 existing 250 MW units and 2 new 660 MW units under construction. The document provides details about the plant's layout, equipment, and processes. Key components discussed include the boiler, turbines, condenser, coal and ash handling systems, and generator. The plant uses a once-through boiler design operating at high pressure and temperature to produce steam that drives steam turbines connected to the generator, producing electricity. Ash is removed from the boiler using a hydraulic system and disposed of properly.thermal power plant suratgarh ppt 
thermal power plant suratgarh ppt Yogesh Singh Takhar
Ìý
This document provides information about the Suratgarh Super Thermal Power Station located in Rajasthan, India. It has a total installed capacity of 1500 MW generated across 6 stages and 2 additional stages currently under construction. The power station uses coal from local mines which is pulverized and fired into boiler furnaces to generate high pressure steam. This steam powers steam turbines which are connected to generators to produce electricity. The document includes diagrams of the plant layout and descriptions of the main components including the boiler, steam turbine, and generator.SURATGARH SUPER THERMAL POWER STATION 
SURATGARH SUPER THERMAL POWER STATION Sagar Sharma
Ìý
The document provides information about the Suratgarh Super Thermal Power Station (SSTPS) in India. It discusses that SSTPS is located near Ranyawali village and has 6 units generating a total of 1,500 MW of power. It also summarizes some key details about the power plant including its land area, water supply system, boiler parameters, turbine specifications, condenser, coal handling process, and ash removal using a hydraulic system.RASHID ANWAR RAAZ ppt
RASHID ANWAR RAAZ pptRashid Anwar Raaz
Ìý
- The document discusses the Sasan Ultra Mega Power Project (UMPP) in Sasan, Madhya Pradesh, India.
- Sasan Power Limited is developing a 3,960 MW coal-fired power plant for the project, located 25 km from coal mines.
- The power plant will be a 6x660 MW facility and was initiated in 2006 with the incorporation of Sasan Power Limited as a subsidiary of Power Finance Corporation Limited.Ppt of ajeet on suratgarh super thermal power station
Ppt of ajeet on suratgarh super thermal power stationajeet singh choudhary
Ìý
This document provides an overview of Ajeet Singh Kuri's internship at the Suratgarh Super Thermal Power Station from May 16 to July 16, 2017. It discusses the power station's location, installed capacity, and favorable conditions. It then outlines the contents of Kuri's presentation, which includes introductions to the power station and the process of steam generation, as well as overviews of the coal handling plant, boiler, turbine, turbo generator, condenser, ash handling plant, cooling towers/ponds, and protection/switching systems.harduaganj thermal power station h.t.p.s.
harduaganj thermal power station h.t.p.s.vaibyfrndz
Ìý
This presentation summarizes the Harduaganj Thermal Power Plant located in Aligarh district, Uttar Pradesh, India. The plant has a total installed capacity of 415MW generated across 5 units, with the last two units each having a capacity of 250MW. The plant operates by burning coal to create steam that drives turbines connected to generators to produce electricity. It also describes the various components used in the thermal power generation process such as the boiler, turbine, condenser, and coal handling equipment.Suratgarh Super Thermal Power Plant
Suratgarh Super Thermal Power PlantHarshit Madaan
Ìý
The document provides information about Harshit Madaan's summer training at Suratgarh Super Thermal Power Station. It includes:
1) An overview of the power station, noting that it has an installed capacity of 1500MW across 6 units, making it the largest power station in Rajasthan.
2) Descriptions of the key components and processes within the power station, including the coal handling plant, boiler, turbine, generator, cooling tower and switchyard.
3) Brief explanations of how the plant generates power through boiling water with coal to create pressurized steam that drives the turbine and generator.Super thermal power station,suratgarh,by rajesh nayak
Super thermal power station,suratgarh,by rajesh nayakRajesh Nayak
Ìý
The document describes the components and process of a coal-based thermal power plant. The plant uses a modified Rankine cycle to convert heat from burning coal into mechanical work through a steam turbine, then into electrical energy using a generator. It lists and explains the key components involved in coal handling, heating water to produce steam, generating power from steam, and managing waste ash.sstps
sstpsRamesh Tholiya
Ìý
The document is a seminar report on summer training at the Suratgarh Super Thermal Power Station. It provides an overview of the power station, including key details like its installed capacity of 1500 MW across 6 existing units with 2 more under construction. It also summarizes the basic processes at a thermal power plant involving the coal handling plant, water treatment, boiler, turbine, generator and other main units. Key components like the boiler, economizer, air preheater are also explained briefly.Kota super thermal power plant,kstps ppt,RTU
Kota super thermal power plant,kstps ppt,RTUManohar Nagar
Ìý
Rajasthan's first major coal-fired power plant, the KSTPS, was established in 1983 near Kota with a total installed capacity of 1240 MW across 7 units ranging from 110-210 MW each. Located on the left bank of the Chambal River, the KSTPS uses a steam turbine generator process utilizing a Rankine cycle to convert the heat from burning coal into electrical energy.TPS training report Gandhinagar, coal base power plant 
TPS training report Gandhinagar, coal base power plant vishal patel
Ìý
This document provides an overview of a practical training report submitted by two students for their Bachelor of Engineering degree in Mechanical Engineering. It includes an introduction to the power plant where they conducted their training, describing its key components like the boiler, coal mill, draught system and more. Diagrams are provided to illustrate the typical processes used in a coal-fired thermal power station.Thermal power plant
Thermal power plantViren Patel
Ìý
A thermal power plant converts the heat energy of coal into electrical energy. Coal is burnt in a boiler to produce steam which drives a steam turbine connected to a generator. Thermal power plants provide the majority of electricity in India. The key components of a thermal power plant include the coal handling system, pulverizers, draft fans, boiler, turbine, condenser, cooling towers, feedwater heaters and others. Thermal power has advantages of using cheap fuel and low initial costs but has disadvantages of polluting the atmosphere. Large thermal power plants in Gujarat include Mundra, Wanakbori and Ukai.Thermal power plant2222222222222222
Thermal power plant2222222222222222Ankit Poonia
Ìý
This document provides an overview of the Panipat Thermal Power Plant in Haryana, India. It details that the plant has a total generating capacity of 1,367.8 MW across 8 units. It describes the key raw materials used, including water from the Yamuna Canal, various types of fuel oils, and coal delivered by rail. It then outlines the major components and processes within the plant, including coal handling, boiler, turbine generation, and switchyard equipment. The goal of the plant is to generate power for the state of Haryana in an efficient commercial manner.Thermal power station
Thermal power stationvishal gupta
Ìý
A thermal power station converts heat energy into electrical power by boiling water to produce steam that spins turbines connected to electrical generators. Water is heated in a boiler, turning it into high-pressure steam that drives the turbine, which turns a generator to produce electricity. After passing through the turbine, the steam is condensed back into water and recycled to be heated again in a closed loop system. Thermal power stations use various heat sources like coal, natural gas, nuclear reactions or solar thermal to produce the steam.Thermal Power Plants
Thermal Power PlantsSasi Institute of Technology & Engineering
Ìý
Operation of a steam or thermal power plant and classification of a cooling towers, condensers, boilers, super heaters, turbines.Thermal power plant from A.I.C.E Jaipur
Thermal power plant from A.I.C.E JaipurChandra veer singh
Ìý
The document is a seminar presentation on thermal power plants. It discusses the classification, layout, components and working of thermal power plants. The main components discussed are the coal handling plant, pulverizing plant, boiler, turbine, condenser, cooling tower, feedwater heater and economizer. Thermal power plants in Rajasthan like Kota, Suratgarh, Giral, Chhabra and Kalisindh are also summarized along with their installed capacities and commissioning details. Advantages, limitations and site selection parameters for thermal plants are also highlighted.Thermal Power Plant Basic to Knowledge
Thermal Power Plant Basic to KnowledgeAnshuman Tyagi
Ìý
This document describes the key components and processes involved in a thermal power plant. Water is heated to produce steam, which spins turbines connected to generators to produce electricity. The main components are the boiler, turbines, condenser, cooling tower and auxiliary systems. Coal is pulverized and burned in the boiler to heat water and produce high pressure steam. The steam powers high, intermediate and low pressure turbines in succession to generate electricity before being condensed back into water in the condenser. The water is cooled in the cooling tower and recycled to the boiler to repeat the process.Thermal Power Plant (Bathinda) PPT
Thermal Power Plant (Bathinda) PPTFateh Singh
Ìý
This document provides an overview of the key components and processes in a thermal power plant. It describes how coal is combusted to generate steam, which powers turbines connected to generators to produce electricity. The main equipment includes the coal handling plant, pulverizer, boiler, turbine, condenser, cooling towers, feedwater heaters, and auxiliary components like the ash handling plant and electrostatic precipitator. Thermal power plants are one of the primary sources of electricity generation in many countries due to their ability to efficiently convert the chemical energy in coal into electrical energy.Thermal power plant
Thermal power plantVinod Srivastava
Ìý
This document describes the key components and working of a thermal power plant. It explains that thermal power plants generate electricity by burning fuel to create high pressure steam, which spins a steam turbine connected to a generator. The main components are the boiler, which produces steam from water; a superheater that increases the steam's temperature; and a steam turbine, which is spun by the steam and connected to a generator to produce electricity. After passing through the turbine, the steam enters a condenser where it is cooled and condensed back into water to repeat the process.KOTA SUPER THERMAL POWER STATION (KSTPS) by RANJAN NAIK
KOTA SUPER THERMAL POWER STATION (KSTPS) by RANJAN NAIKRanjan Naik
Ìý
A good ppt presentation for seminar presentation with added videos and animation.Plz use office 2010 for better animations.thermal power plant 
thermal power plant GOD BRAIN
Ìý
A thermal power plant converts heat from the combustion of fuels like coal into electrical energy. Coal is burned to produce steam that spins turbines connected to generators. Thermal power plants provide the majority of India's electricity by using steam turbines. They have components like a coal handling system, pulverizers, burners, steam turbines, ash handling equipment, and boilers to convert the heat from combustion into rotational energy and then electricity.Thermal power plant
Thermal power plantaman Singh
Ìý
This document provides an overview of a thermal power plant, including its key components and processes. It begins with an introduction to thermal power plants in India and how they generate electricity using steam turbines. It then defines a thermal power plant and provides block diagrams of the main components. The main body of the document describes each major equipment in more detail, such as the coal handling plant, boiler, turbine, condenser, and cooling towers. It also lists some thermal power plants located in Rajasthan and discusses the advantages and disadvantages of thermal power generation.Thermal Plant report (Mechanical)
Thermal Plant report (Mechanical)sometech
Ìý
The Thermal Power Station burns fuel & uses the resultant to make the steam, which derives the turbo generator. The Fuel i.e. coal is burnt in pulverized from. The pressure energy of the steam produce is converted into mechanical energy with the help of turbine. The mechanical energy is fed to the generator where the magnet rotate inside a set of stator winding & thus electricity is produced in India 65% of total power is generated by thermal power stations. To understand the working of the Thermal Power Station plant, we can divide the whole process into following parts. Thermal power plant
Thermal power plantHARI GOVIND SINGH
Ìý
Thermal power plants operate using the Rankine cycle. Water is heated into steam in a boiler using heat from burning fuel. The high-pressure steam drives turbines which are coupled to generators, producing electricity. The low-pressure exhaust steam from the turbines is condensed into water in a condenser, where it is pumped back into the boiler to repeat the cycle. Thermal power plants contribute the majority of electricity generation in India due to their ability to efficiently convert fuel into power on a large scale.PANIPAT THERMAL POWER PLANT
PANIPAT THERMAL POWER PLANTSahil arora
Ìý
The document summarizes the key components and processes of a thermal power plant. It describes how coal is pulverized and mixed with preheated air before being combusted in the boiler to generate steam. The steam then powers turbines which drive generators to produce electricity. After passing through the turbines, the steam is condensed back into water in the condenser and deaerator before being pumped back into the boiler via various heat exchangers like the economizer to improve efficiency. The plant has 8 generating units with a total capacity of 1360 MW constructed in 4 stages.Steam power plant
Steam power plantRaxitVasoya
Ìý
This is ppt about the steam power plant.In this ppt,whole concepts of steam power plant is covered.it is very helpful for student as well as business person for the presentation purpose.Super thermal power plant,suratgarh
Super thermal power plant,suratgarhRajesh Nayak
Ìý
this presentation is prepared by rajesh nayak during his engineering through electrical branch. this is the best ppt you will find in slideshare. thankyouHADITS SHOHIH
HADITS SHOHIHDewi Sanusi Noor
Ìý
Dokumen tersebut membahas tentang definisi hadits shahih secara bahasa dan istilah, ciri-ciri hadits shahih, macam-macam hadits shahih, dan unsur-unsur keshahihan sanad hadits. Hadits shahih didefinisikan sebagai hadits yang diriwayatkan oleh rawi-rawi yang adil dan sempurna ingatannya, sanadnya bersambung tanpa cacat, dan matannya tidak janggal.More Related Content
What's hot (20)
Suratgarh Super Thermal Power Plant
Suratgarh Super Thermal Power PlantHarshit Madaan
Ìý
The document provides information about Harshit Madaan's summer training at Suratgarh Super Thermal Power Station. It includes:
1) An overview of the power station, noting that it has an installed capacity of 1500MW across 6 units, making it the largest power station in Rajasthan.
2) Descriptions of the key components and processes within the power station, including the coal handling plant, boiler, turbine, generator, cooling tower and switchyard.
3) Brief explanations of how the plant generates power through boiling water with coal to create pressurized steam that drives the turbine and generator.Super thermal power station,suratgarh,by rajesh nayak
Super thermal power station,suratgarh,by rajesh nayakRajesh Nayak
Ìý
The document describes the components and process of a coal-based thermal power plant. The plant uses a modified Rankine cycle to convert heat from burning coal into mechanical work through a steam turbine, then into electrical energy using a generator. It lists and explains the key components involved in coal handling, heating water to produce steam, generating power from steam, and managing waste ash.sstps
sstpsRamesh Tholiya
Ìý
The document is a seminar report on summer training at the Suratgarh Super Thermal Power Station. It provides an overview of the power station, including key details like its installed capacity of 1500 MW across 6 existing units with 2 more under construction. It also summarizes the basic processes at a thermal power plant involving the coal handling plant, water treatment, boiler, turbine, generator and other main units. Key components like the boiler, economizer, air preheater are also explained briefly.Kota super thermal power plant,kstps ppt,RTU
Kota super thermal power plant,kstps ppt,RTUManohar Nagar
Ìý
Rajasthan's first major coal-fired power plant, the KSTPS, was established in 1983 near Kota with a total installed capacity of 1240 MW across 7 units ranging from 110-210 MW each. Located on the left bank of the Chambal River, the KSTPS uses a steam turbine generator process utilizing a Rankine cycle to convert the heat from burning coal into electrical energy.TPS training report Gandhinagar, coal base power plant
TPS training report Gandhinagar, coal base power plant vishal patel
Ìý
This document provides an overview of a practical training report submitted by two students for their Bachelor of Engineering degree in Mechanical Engineering. It includes an introduction to the power plant where they conducted their training, describing its key components like the boiler, coal mill, draught system and more. Diagrams are provided to illustrate the typical processes used in a coal-fired thermal power station.Thermal power plant
Thermal power plantViren Patel
Ìý
A thermal power plant converts the heat energy of coal into electrical energy. Coal is burnt in a boiler to produce steam which drives a steam turbine connected to a generator. Thermal power plants provide the majority of electricity in India. The key components of a thermal power plant include the coal handling system, pulverizers, draft fans, boiler, turbine, condenser, cooling towers, feedwater heaters and others. Thermal power has advantages of using cheap fuel and low initial costs but has disadvantages of polluting the atmosphere. Large thermal power plants in Gujarat include Mundra, Wanakbori and Ukai.Thermal power plant2222222222222222
Thermal power plant2222222222222222Ankit Poonia
Ìý
This document provides an overview of the Panipat Thermal Power Plant in Haryana, India. It details that the plant has a total generating capacity of 1,367.8 MW across 8 units. It describes the key raw materials used, including water from the Yamuna Canal, various types of fuel oils, and coal delivered by rail. It then outlines the major components and processes within the plant, including coal handling, boiler, turbine generation, and switchyard equipment. The goal of the plant is to generate power for the state of Haryana in an efficient commercial manner.Thermal power station
Thermal power stationvishal gupta
Ìý
A thermal power station converts heat energy into electrical power by boiling water to produce steam that spins turbines connected to electrical generators. Water is heated in a boiler, turning it into high-pressure steam that drives the turbine, which turns a generator to produce electricity. After passing through the turbine, the steam is condensed back into water and recycled to be heated again in a closed loop system. Thermal power stations use various heat sources like coal, natural gas, nuclear reactions or solar thermal to produce the steam.Thermal Power Plants
Thermal Power PlantsSasi Institute of Technology & Engineering
Ìý
Operation of a steam or thermal power plant and classification of a cooling towers, condensers, boilers, super heaters, turbines.Thermal power plant from A.I.C.E Jaipur
Thermal power plant from A.I.C.E JaipurChandra veer singh
Ìý
The document is a seminar presentation on thermal power plants. It discusses the classification, layout, components and working of thermal power plants. The main components discussed are the coal handling plant, pulverizing plant, boiler, turbine, condenser, cooling tower, feedwater heater and economizer. Thermal power plants in Rajasthan like Kota, Suratgarh, Giral, Chhabra and Kalisindh are also summarized along with their installed capacities and commissioning details. Advantages, limitations and site selection parameters for thermal plants are also highlighted.Thermal Power Plant Basic to Knowledge
Thermal Power Plant Basic to KnowledgeAnshuman Tyagi
Ìý
This document describes the key components and processes involved in a thermal power plant. Water is heated to produce steam, which spins turbines connected to generators to produce electricity. The main components are the boiler, turbines, condenser, cooling tower and auxiliary systems. Coal is pulverized and burned in the boiler to heat water and produce high pressure steam. The steam powers high, intermediate and low pressure turbines in succession to generate electricity before being condensed back into water in the condenser. The water is cooled in the cooling tower and recycled to the boiler to repeat the process.Thermal Power Plant (Bathinda) PPT
Thermal Power Plant (Bathinda) PPTFateh Singh
Ìý
This document provides an overview of the key components and processes in a thermal power plant. It describes how coal is combusted to generate steam, which powers turbines connected to generators to produce electricity. The main equipment includes the coal handling plant, pulverizer, boiler, turbine, condenser, cooling towers, feedwater heaters, and auxiliary components like the ash handling plant and electrostatic precipitator. Thermal power plants are one of the primary sources of electricity generation in many countries due to their ability to efficiently convert the chemical energy in coal into electrical energy.Thermal power plant
Thermal power plantVinod Srivastava
Ìý
This document describes the key components and working of a thermal power plant. It explains that thermal power plants generate electricity by burning fuel to create high pressure steam, which spins a steam turbine connected to a generator. The main components are the boiler, which produces steam from water; a superheater that increases the steam's temperature; and a steam turbine, which is spun by the steam and connected to a generator to produce electricity. After passing through the turbine, the steam enters a condenser where it is cooled and condensed back into water to repeat the process.KOTA SUPER THERMAL POWER STATION (KSTPS) by RANJAN NAIK
KOTA SUPER THERMAL POWER STATION (KSTPS) by RANJAN NAIKRanjan Naik
Ìý
A good ppt presentation for seminar presentation with added videos and animation.Plz use office 2010 for better animations.thermal power plant
thermal power plant GOD BRAIN
Ìý
A thermal power plant converts heat from the combustion of fuels like coal into electrical energy. Coal is burned to produce steam that spins turbines connected to generators. Thermal power plants provide the majority of India's electricity by using steam turbines. They have components like a coal handling system, pulverizers, burners, steam turbines, ash handling equipment, and boilers to convert the heat from combustion into rotational energy and then electricity.Thermal power plant
Thermal power plantaman Singh
Ìý
This document provides an overview of a thermal power plant, including its key components and processes. It begins with an introduction to thermal power plants in India and how they generate electricity using steam turbines. It then defines a thermal power plant and provides block diagrams of the main components. The main body of the document describes each major equipment in more detail, such as the coal handling plant, boiler, turbine, condenser, and cooling towers. It also lists some thermal power plants located in Rajasthan and discusses the advantages and disadvantages of thermal power generation.Thermal Plant report (Mechanical)
Thermal Plant report (Mechanical)sometech
Ìý
The Thermal Power Station burns fuel & uses the resultant to make the steam, which derives the turbo generator. The Fuel i.e. coal is burnt in pulverized from. The pressure energy of the steam produce is converted into mechanical energy with the help of turbine. The mechanical energy is fed to the generator where the magnet rotate inside a set of stator winding & thus electricity is produced in India 65% of total power is generated by thermal power stations. To understand the working of the Thermal Power Station plant, we can divide the whole process into following parts. Thermal power plant
Thermal power plantHARI GOVIND SINGH
Ìý
Thermal power plants operate using the Rankine cycle. Water is heated into steam in a boiler using heat from burning fuel. The high-pressure steam drives turbines which are coupled to generators, producing electricity. The low-pressure exhaust steam from the turbines is condensed into water in a condenser, where it is pumped back into the boiler to repeat the cycle. Thermal power plants contribute the majority of electricity generation in India due to their ability to efficiently convert fuel into power on a large scale.PANIPAT THERMAL POWER PLANT
PANIPAT THERMAL POWER PLANTSahil arora
Ìý
The document summarizes the key components and processes of a thermal power plant. It describes how coal is pulverized and mixed with preheated air before being combusted in the boiler to generate steam. The steam then powers turbines which drive generators to produce electricity. After passing through the turbines, the steam is condensed back into water in the condenser and deaerator before being pumped back into the boiler via various heat exchangers like the economizer to improve efficiency. The plant has 8 generating units with a total capacity of 1360 MW constructed in 4 stages.Steam power plant
Steam power plantRaxitVasoya
Ìý
This is ppt about the steam power plant.In this ppt,whole concepts of steam power plant is covered.it is very helpful for student as well as business person for the presentation purpose.Viewers also liked (18)
Super thermal power plant,suratgarh
Super thermal power plant,suratgarhRajesh Nayak
Ìý
this presentation is prepared by rajesh nayak during his engineering through electrical branch. this is the best ppt you will find in slideshare. thankyouHADITS SHOHIH
HADITS SHOHIHDewi Sanusi Noor
Ìý
Dokumen tersebut membahas tentang definisi hadits shahih secara bahasa dan istilah, ciri-ciri hadits shahih, macam-macam hadits shahih, dan unsur-unsur keshahihan sanad hadits. Hadits shahih didefinisikan sebagai hadits yang diriwayatkan oleh rawi-rawi yang adil dan sempurna ingatannya, sanadnya bersambung tanpa cacat, dan matannya tidak janggal.How to Enable File and Print Sharing on Windows
How to Enable File and Print Sharing on WindowsPertino
Ìý
The document provides instructions for enabling file and print sharing on Windows, creating a user account, and sharing a folder. It is divided into three parts: the first part explains how to enable file and print sharing in the advanced sharing settings; the second part describes how to create a new user account from the Control Panel; and the third part outlines the steps to right click a folder, select sharing properties, and check the box to share the folder.STRATIFIKASI
STRATIFIKASIDewi Sanusi Noor
Ìý
Dokumen tersebut membahas tentang stratifikasi sosial dan persamaan derajat. Stratifikasi sosial adalah pelapisan masyarakat berdasarkan status sosial yang diukur dari kekayaan, kekuasaan, kehormatan, dan ilmu pengetahuan. Sistem stratifikasi sosial dibedakan menjadi tertutup, terbuka, dan campuran. Dokumen juga membahas bahwa Islam dan UUD 1945 menjamin persamaan hak antar manusia tanpa memandang perbedaan.Pertino Overview for the IT Generalist
Pertino Overview for the IT GeneralistPertino
Ìý
The document discusses Pertino, a cloud network engine that creates a secure overlay network across the public internet. It allows users to access LAN applications, securely share files, and print remotely without dedicating significant time or resources. Pertino supports Windows, MacOS, and Linux devices. Users simply download and install Pertino, which establishes an encrypted tunnel to the Pertino cloud network, making devices appear local and accessible to one another for file sharing, remote desktop, and other functions. Additional servers can also be added on-site or to the cloud for remote access to files and applications.Bab i
Bab iHasan Choky Cooker
Ìý
Dokumen tersebut membahas tentang implementasi strategi perusahaan, meliputi pengertian implementasi strategi, proses implementasi, pihak yang bertanggung jawab melaksanakan strategi, penyusunan program dan anggaran untuk mendukung implementasi, serta faktor-faktor pendukung seperti struktur organisasi dan budaya organisasi.Fast Answers about Pertino
Fast Answers about PertinoPertino
Ìý
Have questions about how the Pertino cloud network engine works? This presentation aims to answer those questions quickly and painlessly. 
Wk1 disc2
Wk1 disc2Ken Pankow
Ìý
The document discusses best practices for training staff on HIPAA rules and regulations. It recommends keeping training simple, entertaining, and tailored for the audience. Face-to-face training is preferable to memos or emails, and should allow time for questions. While multimedia programs may be cheaper, they lack interaction. The training should also cover consequences of violating HIPAA and have a test to ensure understanding. It should explain how the organization's systems are set up to prevent violations and be properly monitored. Leaders should lead by example in using systems appropriately and frame the training as benefiting patients rather than just following rules. UFO infographic
UFO infographictoad36melody
Ìý
This document discusses an infographic about UFO sightings in 2012 created by World UFO Day. The infographic contains data from the Mutual UFO Network (MUFON) about UFO sightings. World UFO Day allows sharing of the infographic with attribution and asks that any questions be directed to their email. Two comments on the post discuss sharing the infographic on a blog and questioning government statements about early UFO sightings.
Wk1 disc2
Wk1 disc2Ken Pankow
Ìý
The document discusses tips for effective HIPAA training, including keeping it simple, entertaining, and tailored for the audience. It recommends face-to-face training over memos or videos to allow for interaction and questions. While multimedia programs may be cheaper, they lack interaction. The training should also explain consequences of violations, have a test for understanding, demonstrate the security system, and lead by example in using the system properly.Cv’s futures - dey
Cv’s futures - deyBOAHistory
Ìý
The document provides guidance on creating an effective curriculum vitae (CV). It emphasizes that a CV should be tailored to the specific job or role being applied for. The key components of a CV are outlined, including personal details, profile, skills, work experience, education, and references. Tips are provided such as emphasizing relevant skills and qualifications, using descriptive language, and focusing on achievements that demonstrate skills transferable to the target role. The document also cautions against common mistakes like irrelevant information, poor formatting, and unexplained gaps. The goal is to create a concise, well-structured CV that catches the employer's attention quickly.Comparing Your IT Networking Options
Comparing Your IT Networking OptionsPertino
Ìý
Learn about the differences between traditional, hardware VPN and cloud networking solutions like Pertino. For more information, visit pertino.comDemokrasi
DemokrasiDewi Sanusi Noor
Ìý
Pemerintahan demokrasi adalah pemerintahan yang didasarkan pada prinsip dari rakyat, oleh rakyat, dan untuk rakyat. Terdapat beberapa model demokrasi seperti liberal, terpimpin, sosial, partisipasi, dan konsosiasional. Ada perbedaan pandangan antara demokrasi Islam dan Barat, namun juga terdapat persamaan. Tantangan demokrasi di Indonesia adalah belum matangnya demokrasi, multi partai yang rentan instabilitas, sUFO infographic
UFO infographictoad36melody
Ìý
This document discusses an infographic about UFO sightings in 2012 created by World UFO Day. The infographic contains data from the Mutual UFO Network (MUFON) about UFO sightings. World UFO Day allows sharing of the infographic with attribution and asks that any questions be directed to their email. Two comments on the post discuss sharing the infographic on a blog and questioning government statements about early UFO sightings.Media
MediaBroganOBrien
Ìý
1) The document describes a music magazine targeted at teenagers interested in indie rock.
2) The front cover features a medium close-up shot of the model giving attitude to appeal to a young audience. It also includes links to social media.
3) Subsequent pages continue the color theme and include additional photos of the model to engage readers throughout the magazine.Similar to Ppt on thremal power station surtgarh by ashok khoja (20)
PPT ON THERMAL POWER PLANT (POLLUTION CONTROLLED)
PPT ON THERMAL POWER PLANT (POLLUTION CONTROLLED)HIMANSHU .
Ìý
!!!!!!!!!!>LINKS FOR THE VIDEOS ARE<!!!!!!!!!!
>>>https://drive.google.com/drive/folders/1cSouvmjSSu7ZSPBq1AA2TYYn87kepoW8?usp=sharing<<<
A generating station which converts heat energy of coal combustion into electrical energy is known as a thermal power station.
IN THIS PPT THERE ARE SOME WAYS OF USING TECHNIQUES TO SOLVE THE PROBLEM OF POLLUTION CAUSED BY THERMAL POWER PLANT
SUMMER INTERNSHIP(INDUSTRAIL REPORT) ON THERMAL POWER PLANT 
SUMMER INTERNSHIP(INDUSTRAIL REPORT) ON THERMAL POWER PLANT Amit Gupta
Ìý
The document describes the key components and processes involved in a typical coal-fired thermal power plant, including coal handling, pulverizing, combustion in the boiler, steam generation, power generation in the turbine, and condensing spent steam. It also provides details on equipment like draft fans, superheaters, reheaters, the ash handling system, feedwater heaters, and installed capacity of thermal power plants in Rajasthan.Bandel training
Bandel trainingSubhadip Sadhukhan
Ìý
This document provides an overview of the Bandel Thermal Power Station located in West Bengal, India. It describes the station's 5 operational units with a total installed capacity of 450MW. The document then explains the basic components and processes of a thermal power plant, including coal handling, pulverizing, the draft system, boiler, turbine, ash handling, condenser, cooling towers/ponds, feedwater heating, and air preheating. Diagrams of a typical Rankine cycle and thermal power plant schematic are also included.Thermal power plant
Thermal power plantVinay Garg
Ìý
A thermal power plant converts the heat energy from burning coal into electrical energy. Coal is burned in a boiler to produce high pressure steam, which spins turbines connected to generators. The main equipment includes the coal handling plant, pulverizer, boiler, turbine, condenser, and cooling towers. The steam produced is used to generate electricity before being condensed back into water and returned to the boiler to complete the cycle.Industrial training at NTPC Shaktinagar
Industrial training at NTPC ShaktinagarRishikesh .
Ìý
This document provides an overview of industrial training at a thermal power station in Singrauli, Madhya Pradesh, India. It describes the basic process of how coal is converted into electricity through various components of the power plant. Key components discussed include the coal handling plant, pulverizer, boiler, turbine, condenser, cooling towers, and burner management system. The document also includes diagrams illustrating the general layout and coal to electricity process of a typical coal-fired thermal power station.Thermalpwrplant 110924082908-phpapp02
Thermalpwrplant 110924082908-phpapp02arvind singh rathore
Ìý
The document provides an overview of a thermal power plant, including its key components and processes. It begins with an introduction to how thermal power plants convert heat energy from coal into electrical energy. It then describes the general layout of a typical coal-fired thermal power plant and lists its main equipment such as the coal handling plant, pulverizer, boiler, turbine, condenser and cooling towers. Each of these components are then explained in more detail. The document also lists some major thermal power plants located in Rajasthan and references used.Overview of Thermal Power Plants
Overview of Thermal Power PlantsDebajyoti Bose
Ìý
1) A boiler produces steam by heating water with a fuel source like coal, gas or oil. The steam is used to generate power via steam turbines or for industrial processes and building heating.
2) A typical thermal power plant has a coal handling plant to feed coal into the boiler furnace. Other key components include a pulverizing plant to grind coal, a draft system to circulate air, superheaters and reheaters to further heat steam, steam turbines to convert steam energy to mechanical energy, and a condenser to condense steam back into water.
3) Auxiliary components include an ash handling plant to remove ash residue from combustion, cooling towers or ponds to cool condenser water for reuseThermal Power Plant - Full Detail About Plant and Parts (Also Contain Animate...
Thermal Power Plant - Full Detail About Plant and Parts (Also Contain Animate...Shubham Thakur
Ìý
A thermal power station is a power plant in which the prime mover is steam driven. Water is heated, turns into steam and spins a steam turbine which drives an electrical generator. After it passes through the turbine, the steam is condensed in a condenser and recycled to where it was heated; this is known as a Rankine cycle. The greatest variation in the design of thermal power stations is due to the different fossil fuel resources generally used to heat the water. Some prefer to use the term energy center because such facilities convert forms of heat energy into electrical energy.[1] Certain thermal power plants also are designed to produce heat energy for industrial purposes of district heating, or desalination of water, in addition to generating electrical power. Globally, fossil fueled thermal power plants produce a large part of man-made CO2 emissions to the atmosphere, and efforts to reduce these are varied and widespread.
For Video on Themal Power Plant (Animated Working Video) :- https://www.youtube.com/watch?v=ouWOhk1INjo
Subscribe To Our Youtube Channel For More Videos:-
https://www.youtube.com/TheEngineeringScienc
Click Here To Subscribe:-
http://www.youtube.com/user/TheEngineeringScienc?sub_confirmation=1Ppt aman
Ppt amanAman Deep Thakur
Ìý
This document provides an overview of the key components and processes in a thermal power plant. Coal is burned in a boiler to produce high pressure steam, which drives turbines that spin generators to produce electricity. Main equipment includes the coal handling plant, pulverizer, boiler, turbine, condenser, and cooling towers. The steam heats feedwater in various stages before condensing in the condenser and being pumped back to the boiler, completing the steam cycle. Thermal power plants generate the majority of India's electricity by converting the thermal energy in coal into rotational energy and ultimately electricity.Thermal power plant
Thermal power plantShikhar Sodhani
Ìý
The document describes the key components and processes involved in a typical coal-fired thermal power plant, including the boiler, turbine, condenser, coal handling equipment, and other auxiliary systems. It also provides diagrams to illustrate the general layout and flow of energy conversion from coal to steam to mechanical power to electricity. Additionally, it briefly mentions some major thermal power plants located in the state of Rajasthan, India.Mtps ppt
Mtps pptsourabhgnit
Ìý
The document provides an overview of the Mejia Thermal Power Station (MTPS) in West Bengal, India. It discusses:
1. MTPS is operated by Damodar Valley Corporation and has a total installed capacity of 2340 MW generated from various units.
2. The power plant layout includes the main equipment used in the generation process such as the coal handling plant, boiler, turbine, condenser, and cooling towers.
3. The stepwise operation begins with coal being burned in the boiler to produce high pressure steam, which is then used to rotate the turbine and generate electricity via the alternator.
Thermalpowerpoint 130818150844-phpapp01
Thermalpowerpoint 130818150844-phpapp01Saurabh Patel
Ìý
A thermal power plant converts the heat energy from coal into electrical energy. Coal is burned in a boiler to produce high pressure steam, which spins turbines connected to generators. This generates electricity. Thermal power plants contribute most of India's power generation, constituting 75.43% of total installed capacity. Key components include the coal handling plant, boiler, turbine, condenser and cooling systems. The steam produced spins the turbines which drive the generator to produce electricity.Thermalpowerpoint 130818150844-phpapp01
Thermalpowerpoint 130818150844-phpapp01arvind singh rathore
Ìý
A thermal power plant converts the heat from coal into electrical energy. Coal is burned in a boiler to produce high pressure steam, which spins turbines connected to generators. This generates electricity. The steam is then condensed in a condenser using cooling water, which is cooled in cooling towers or ponds and recycled. Thermal power plants generate over 75% of India's power by converting the thermal energy from combustion into electrical energy.Thermal power point
Thermal power pointSwatantra Kumar
Ìý
A thermal power plant converts the heat from coal into electrical energy. Coal is burned in a boiler to produce high pressure steam, which spins turbines connected to generators. This generates electricity. The steam is then condensed in a condenser using cooling water, which is cooled in cooling towers or ponds and recycled. Thermal power plants currently contribute the majority of electricity production in India.Thermal power plant
Thermal power plantRabi Kumar
Ìý
This document is a seminar report submitted by Rabindra Kumar Guin on the topic of thermal power plants. It provides an overview of the major equipment used in thermal power plants, including boilers, turbines, condensers, pumps, and more. It also explains the basic working principle of the Rankine cycle used in thermal power generation, where heat is converted to mechanical work and then electrical energy. The report discusses the advantages and disadvantages of thermal power plants and concludes by discussing opportunities to improve efficiency and reduce emissions from these important sources of electricity.2013edusat lecture on steam plant(2)
2013edusat lecture on steam plant(2)iimt college meerut
Ìý
This document provides information about the key components and processes involved in a steam power plant. It discusses the essential equipment needed like the furnace, boiler, turbine, and piping system. It also describes the main circuits for feed water/steam, coal/ash, air/gas, and cooling water. The document outlines the basic Rankine cycle used in steam power plants and lists the common types of components used.THERMAL POWER PLANT
THERMAL POWER PLANTarunkumar6836
Ìý
This document summarizes the key components of a typical coal-fired thermal power plant, including:
1. The coal handling plant feeds coal automatically into the boiler furnace. A 200MW plant uses around 2000 tons of coal daily.
2. Ash handling plants deal with the large amounts of ash produced daily, around 5000 tons for a 2000MW plant.
3. Steam from the boiler powers the turbine, which drives the generator to convert heat energy into electrical energy.Coal Base Thermal Power Plant
Coal Base Thermal Power PlantPankaj Mohan
Ìý
A thermal power plant converts the heat energy from burning coal into electrical energy. Coal is burned in a boiler to produce steam, which spins turbines connected to generators. Thermal power plants account for over 75% of India's total power generation. Key components include the coal handling plant, boiler, turbine, condenser, and cooling system. The steam produced spins the turbine which is connected to the generator, producing electricity that is stepped up and transmitted via transformers.Ppt on thremal power station surtgarh by ashok khoja
- 1. By: Ashok khoja E.E. FINAL YEAR
- 2. SURATGARH THERMAL POWER PLANT
- 4. THERMAL POWER STATiON
- 5. •Coal handling plant •BOILER •Steam Turbine 1.DEAERATOR 2.4. Heat excHangers 3.SUPER HEATER 4.CONDENSOR 5.FEED WATER HEATER
- 7. Boiler
- 8. THE BOILER SYSTEM COMPRISES OF  Feed water system:-Feed water system provides water to the boiler Steam system:- steam system collects and controls the steam produced in the boiler Fuel system:- The fuel system includes all equipment used to provide fuel. Two sources of feed water Condensate or condensed steam returned from the processes.  Makeup water (treated raw water) which must come from outside
- 9. Steam Turbine ï‚—It is a machine in which a shaft is rotated steadily by reaction of steam, air upon blades of a wheel. ï‚—When Steam is used then called steam turbine. Kinetic Mechanical Energy power
- 10. turbine princple
- 11. 3. Deaerator A deaerator is a device that is widely used for the removal of air and other dissolved gases from the feed water to steam generating boilers In particular, dissolved oxygen in boiler feedwaters will cause serious It also combines with any dissolved carbon dioxide to form carbonic acid. Most deaerators are designed to remove oxygen down to levels of 7 ppb by weight (0.0005 cm³/L) or less.
- 12. 4. Heat excHangers Heat exchangers are equipment that transfers heat from one medium to another. Heat exchanger performance can deteriorate with time, off design operations and other interferences such as fouling, scaling etc. It is necessary to assess periodically the heat exchanger performance in order to maintain them at a high efficiency level.
- 13. 5. Super Heater A super heater is a device in a steam engine that heats the steam generated by the boiler again, increasing its thermal energy. Super heaters increase the efficiency of the steam engine, and were widely adopted. Super heaters were applied to steam locomotives to most steam vehicles, and to stationary steam engines including power stations.
- 14. 6. CondenSer
- 15. 8. Feed water Heater The feed water heating equipment then raises the temperature of the water by utilizing extraction steam from various stages of the turbine. Preheating the feed water reduces the irreversibility's involved in steam generation
- 16. QUERIES ? THANK YOU…