狠狠撸

PR QUIZ BY: PR2(AW/SW ) K. HART

LR-1 PERSONNEL LIFERAFT ASSEMBLY

HOW MANY PEOPLE WITH THE LR-1 LIFERAFT ASSEMBLY ACCOMMODATE?

WHAT TYPE OF MATERIAL IS THE LR-1 MANUFACTURED FROM?

WHAT INFLATION ASSEMBLY IS EMPLOYED BY THE LR-1?

WHAT COLOR IS THE LR-1’S WEATHERSHIELD?

HOW OFTEN ARE THE FUNCTIONAL AND PULL CABLE PROOF LOAD TEST PERFORMED?

HOW OFTEN IS THE LEAKAGE TEST CONDUCTED?

WHAT RIPCORDS ARE TACKED DURING THE PACKING PROCESS?

WHAT ARE RIPCORD PINS TACKED WITH?

1 TURN OF SIZE E THREAD SINGLE

DURING THE FUNCTIONAL TEST, THE LR-1 SHALL INFLATE FULLY IN WHAT AMOUNT OF TIME?

HOW MUCH FORCE IS PLACED BETWEEN THE BALL AND TOGGLE DURING THE PROOF LOAD TEST?

DURING THE VISUAL INSPECTION TO HOW MANY psig SHOULD THE LIFERAFT BE INFLATED?

WHAT CAN BE USED AS A SUBSTITUTE FOR AIR DURING THE VISUAL INSPECTION?

WHAT WEIGHT OF CO 2 IS USED IN THE FLOATATION ASSEMBLY OF AND LR-1 LIFERAFT?

WHAT SIZE AND COLOR ARE THE MARKINGS ON THE CO 2 BOTTLE?

DURING THE LEAKAGE TEST TO HOW MANY psig SHOULD THE LIFERAFT BE INFLATED?

AFTER THE INTIAL INFLATION, HOW LONG SHOULD YOU WAIT BEFORE ADJUSTING THE PRESSURE?

AFTER READJUSTING THE PRESSURE HOW LONG SHOULD THE LIFERAFT BE LEFT UNDISTURBED BEFORE TAKING THE PRESSURE READING?

WHAT SHOULD THE PRESSURE BE IN THE LIFERAFT AFTER THE TEST AND CHECK PERIOD?

WHAT IS THE RATIO OF CLEANING SOLUTION TO WATER?

WHAT IS THE PREFFERED METHOD OF CLEANING AN AREA BEFORE PATCHING?

WHAT IS THE LEAST PREFERRED METHOD OF CLEANING BEFORE PATCHING?

HOW MANY APPLICATIONS OF CLEANING SOLUTION IS USED BEFORE PATCHING?

HOW MANY COATS OF GLUE ARE USED WHEN PATCHING?

HOW LONG SHOULD YOU WAIT BETWEEN COATS OF GLUE?

AFTER PATCHING HOW LONG SHOULD YOU LEAVE THE LIFERAFT UNDISTURBED?

WHAT IS DONE TO THE LIFERAFT AFTER THE PATCHING AND WAITING TIME ARE OVER?

DUST AFFECTED AREA WITH TALCUM POWDER

WHEN PATCHING, HOW MUCH LARGER SHOULD THE PATCH BE THAN THE HOLE?

WHEN REPAIRING SEAM TAPE, HOW MUCH OVERLAP SHOULD BE INCORPORATED ON EACH END?

IN WHAT AIRCRAFT IS THE LR-1 UTILIZED?

C-2, E-2, F-14(SKU-2/A), F/A-18(SKU-3/A), EA-6B(SKU-12/A)

WHAT SURVIVAL ITEMS ARE STORED IN THE LR-1?

2 SEA DYE MARKERS, 2 MK-124, 1 URT-33, 1 POWER SUPPLY, 3 BAGGED WATERS, 50’ OF NYLON CORD, SRU-31, EMERGENCY CODE MANUAL, TYPE II, 3oz, COMBAT CASUALTY BLANKET, BAILING SPONGE, PERSONAL LOWERING DEVICE

HOW MANY TOTAL oz OF WATER ARE STORED IN THE LR-1?

HOW MANY PEOPLE WILL THE LRU-23/P ACCOMMODATE?

WHAT ARE THE 3 MAIN COMPONENTS ON THE LRU-23?

FLOATATION CHAMBER, DOUBLE LAYER FLOOR AND DOUBLE LAYER CANOPY

WHAT TYPE OF CLOTH IS USED TO CONSTRUCT THE LRU-23/P?

ORALLY BY THE AIRCREWMEMBER AFTER BOARDING

IN WHAT AIRCRAFT IS THE LRU-23/P UTILIZED?

WHAT IS THE IDEAL TEMPERATURE OF THE SHOP WHEN PERFORMING MAINTENANCE ON THE LRU-23?

WHAT IS USED TO MARK DAMAGE ON THE LRU-23?

AFTER THE LIFERAFT IS USED IN SALTWATER, WHAT MUST BE DONE?

CLEANED AND USED FOR TRAINING ONLY

THE LIFERAFT MUST BE REMOVED FROM SERVICE IF THERE ARE MORE THAN HOW MANY SQUARE INCHES OF PATCHES?

WHAT TYPE OF INFLATION ASSEMBLY IS USED IN THE LRU-23/P?

WHAT CRITERIA MUST THE CO 2 BOTTLE MEET TO REMAIN IN SERVICE?

ITS WEIGHT MUST BE THE SAME AS THE WEIGHT STAMPED ON THE BOTTLE

IN WHAT ORDER ARE THE LEAK TESTS PERFORMED ON THE CANOPY AND FLOOR?

HOW MANY PEOPLE WILL THE LRU-18/U ACCOMODATE?

THE LRU-18/U IS REPLACING WHAT LIFERAFT?

WHAT TYPE OF MATERIAL IS USED IN THE CONSTRUCTION OF THE LRU-18/U?

HEAT-SEALABLE POLYURETHANE COATED NYLON

WHAT FLOATATION TUBES ARE INFLATED ORALLY?

WHAT FLOATATION TUBES ARE INFLATED WITH CO 2 ?

IN WHAT AIRCRAFT ARE THE LRU-18/U EMPLOYED?

E-2C (SKK-9) AND HELOS (SRU-31/P)

HOW OFTEN MUST O-LEVEL PRS INSPECT THE LRU-18/U?

HOW OFTEN ARE LRU-18’S USED IN HELOS INSPECTED BY I-LEVEL PR’S?

DURING THE FUNCTIONAL INSPECTION, THE LIFERAFT SHOULD INFLATE FULLY IN WHAT AMOUNT OF TIME?

THE MARKINGS ON THE LRU-18/U SHOULD BE WHAT COLOR?

LRU-33/A MULTI-PLACE LIFERAFT (MPLR)

HOW MANY PEOPLE WILL THE LRU-33/A ACCOMODATE?

WHAT LIFERAFT WILL THE LRU-33/A REPLACE?

(TRUE/FALSE) THE CANOPY INCOROPORATED WITH THE LRU-33/A IS SELF-ERECTING

(TRUE/FALSE) SELF-INFLATING BOARDING RAMPS ARE USED IN THE LRU-33/A

THE LRU-33/A HAS HOW MANY WATER ACTIVATED LIGHTS AND WHERE ARE THEY LOCATED?

2, ONE INSIDE AND ONE OUTSIDE

IN WHAT AIRCRAFT IS THE LRU-33/A USED?

HOW OFTEN IS THE LRU-33/A REPACKED AND BY WHOM IS IT REPACKED?

HOW OFTEN IS THE LRU-33/A INSPECTED AT I-LEVEL?

EVERY ISIS INSPECTION NOT TO EXCEED 448 DAYS

HOW MANY SEA DYE MARKERS ARE STOWED IN THE LRU-33?

HOW MANY MK-124s ARE STOWED IN THE LRU-33?

BESIDES THE MK-124 WHAT OTHER SIGNAL FLARE IS STOWED IN THE LRU-33?

HOW MANY TOTAL OUNCES OF WATER ARE STOWED IN THE LRU-33?

HOW MANY FIRST AID KITS ARE STOWED IN THE LRU-33?

HOW MANY CHEMLIGHTS ARE STOWED IN THE LRU-33?

HOW MANY MK-79 SIGNAL KITS ARE STOWED IN THE LRU-33?

TRI-SAR FLOATATION VEST FOR SEARCH AND RESCUE OPERATIONS

IN WHAT MANUAL IS THE MAINTENANCE AND INSPECTION PROCEDURES FOR THE TRI-SAR FLOATATION LOCATED?

HOW OFTEN IS THE SPECIAL INSPECTION PERFORMED?

HOW OFTEN IS THE FUNCTIONAL TEST PERFORMED?

HOW OFTEN IS THE LEAKAGE TEST PERFORMED?

DURING THE FUNCTIONAL TEST, HOW LONG SHOULD IT TAKE THE TRI-SAR FLOATATION TO INFLATE FULLY?

DURING THE LEAKAGE TEST, THE FLOATATION SHOULD BE INFLATED TO HOW MANY psig?

HOW LONG MUST THE FLOATATION BE LEFT UNDISTURBED DURING THE LEAKAGE TEST?

AFTER THE FLOATATION HAS BEEN LEFT UNDISTURBED IT SHOULD HAVE HOW MANY psig?

LPU-23/P SERIES LIFE PRESERVER ASSEMBLY

IN WHAT TYPE OF AIRCRAFT IS THE LPU-23/P SERIES LIFE PRESERVER USED?

WHAT TYPE OF INFLATION ASSEMBLY IS USED IN THE LPU-23?

FLU-8A/P (BEING REPLACED WITH THE FLU-8B/P)

HOW MUCH DOES THE LPU-23 WEIGH?

THE LPU-23 PROVIDES THE AIRCREW MEMBER WITH HOW MUCH BUOYANCY?

HOW MANY FLOATATION CHAMBERS DOES THE LPU-23 HAVE?

WHAT ARE THE TWO MODES OF OPERATION OF THE INFLATION ASSEMBLY?

WHICH MODE OF OPERATION IS A ONE TIME USE?

WHAT TYPE OF CO 2 IS USED IN THE LPU-23?

THE WEBBING BELT HAS WHAT SIZE RANGE?

WHAT IS THE PRIMARY MEANS OF INFLATION?

MANUAL BY PULLING THE BEADED HANDLE

THE LPU-23 WILL INFLATE AUTOMATICALLY IN WHAT TYPE OF WATER?

THE LPU-23 IS SUBJECTED TO A SPECIAL INSPECTION, PERFORMED AT I-LEVEL, HOW OFTEN?

DURING THE FUNCTIONAL TEST, THE LPU-23 SHOULD FULLY INFLATE IN WHAT AMOUNT OF TIME?

DURING THE VISUAL INSPECTION, THE LPU-23 SHOULD BE INFLATED TO HOW MANY psig?

IN WHAT MANUAL CAN A PR FIND INFORMATION ABOUT THE FLU-8B/P?

HOW LONG ARE THE BATTERIES USED IN THE FLU-8B/P SERVICABLE?

3 YEARS FROM THE DATE OF MANUFACTURE

(TRUE/FALSE) WHEN INSPECTING THE FLU-8, THE SILVER INDICATOR SHOULD BE VISIBLE

FALSE, IF THE SILVER INDICATOR IS VISIBLE IT MEANS THE FLU-8 HAS BEEN USED AND SHOULD BE REMOVED FROM SERVICE

WHAT TYPE OF MULTIMETER SHOULD BE USED TO TEST THE BATTERIES INSTALLED IN THE FLU-8?

WHEN TESTING THE BATTERIES INSTALLED IN THE FLU-8, HOW LONG SHOULD YOU WAIT BEFORE TAKING A READING?

15 SECONDS, THIS WILL ALLOW THE CIRCUIT TO STABILIZE

(TRUE/FALSE) WHEN REPLACING BATTERIES, YOU SHOULD ONLY REPLACE THE BATTERY THAT HAS A LOW READING

FALSE, YOU SHOULD ALWAYS REPLACE BOTH BATTERIES TOGETHER

WHEN TESTING THE BATTERIES, A READING OF -12 INDICATES WHAT?

THE BATTERIES ARE INSTALLED BACKWARDS

WHEN TESTING THE BATTERIES A READING OF 0 INDICATES WHAT?

ONE BATTERY IS INSTALLED BACKWARDS, THERE IS A FAULTY CONTACT, OR NO BATTERIES ARE INSTALLED

WHEN TESTING BATTERIES A READING OF +12 INDICATES WHAT?

THE BATTERIES ARE GOOD AND CAN BE USED

WHEN PERFORMING THE BEADED HANDLE PULL TEST, THE PRESERVER SHOULD INFLATE WITH WHAT AMOUNT OF FORCE?

WHEN PACKING THE PRESERVER, IN WHAT ORDER ARE THE FLAPS FOLDED?

BOTTOM – TOP – INBOARD - OUTBOARD

PARACHUTES AND ASSOCIATED SYSTEMS

WHAT IS THE MAXIMUM WATER TEMPERATURE WHEN WASHING A PARACHUTE?

WHAT IS THE MAXIMUM TEMPERATURE OF THE DRYER WHEN DRYING A PARACHUTE?

WHEN WASHING A PARACHUTE, YOU SHOULD GATHER AND TIE SUSPENSION LINES EVERY HOW MANY FEET?

PCU-56/P PARACHUTE RESTRAINT HARNESS ASSEMBLY

ALL STITCHING ON THE PCU-56/P SHOULD BE DONE WITH WHAT SIZE THREAD?

DURING THE PLACE IN SERVICE, WHAT SHOULD BE STENCILED ONTO THE HARNESS? ( IT CAN BE FOUND ON THE CONTAINER)

DATE OF MANUFACTURE (MONTH/YEAR)

ON THE FRICTION BAR, THE WORD “FRONT” SHOULD FACE WHAT DIRECTION?

WHAT SHOULD BE USED INCONJUCTION WITH PLIERS TO PREVENT DAMAGE?

MATERIAL SHOULD BE PLACED OVER THE PLIER JAWS

THE GATED D-RING SHOULD GATE IN WHAT DIRECTION?

(TRUE/FALSE) THE D-RING SHOULD BE PLACED ABOVE THE LAP BELT

WHAT MINIMUM LENGTH OF WEBBING SHOULD BE LEFT EXTENDED FROM THE FRICTION BAR?

(TRUE/FALSE) THE LPU-36/37 MUST BE FITTED TO THE AIRCREW MEMBER BEFORE BEING ATTACHED TO THE HARNESS

NES-12 PERSONNEL PARACHUTE ASSEMBLY

THE NES-12 IS USED WITH WHAT 2 TORSO HARNESSES?

WHAT TYPE OF CANOPY IS USED WITH THE NES-12?

THE CANOPY CONSISTS OF WHAT COLORS (4)?

WHITE, OLIVE GREEN, INTERNATIONAL ORANGE , SAND SHADE

THE NES-12 HAS AN OPTIONAL LUMBER SUPPORT THAT IS USED IN WHAT AIRCRAFT?

(TRUE/FALSE) THE NES-12 IS EQUIPPED WITH AN EXTERNAL PILOT PARACHUTE

THE PILOT PARACHUTE INFLATES FULLY AT WHAT AIR SPEED?

BETWEEN 90 AND 250 KNOTS THE PILOT PARACHUTE TAKES WHAT ACTION?

AT SPEEDS ABOVE 250 KNOTS, THE PILOT PARACHUTE DOES WHAT?

THE AUTOMATIC PARACHUTE RIPCORD RELEASE (APRR), INSTALLED IN THE NES-12 IS SET TO AUTOMATICALLY DEPLOY AT WHAT ALTITUDE?

THE FOUR-LINE RELEASE ASSEMBLY AUTOMATICALLY RELEASES THE SUSPENSION LINES WHEN IMMERSED IN WHAT TYPE OF WATER?

THE FOUR-LINE RELEASE ASSEMBLY RELEASES WHAT SUSPENSION LINES?

THE NES-12 IS REPACKED HOW OFTEN?

MXU-746/P and MXU-747/P PARACHUTE HARNESS SENSING RELEASE UNITS

THE MXU’s ARE ACTIVATED IN WHAT TYPE OF WATER?

WHEN PERFORMING THE RESISTANCE CHECK WHERE SHOULD THE LEADS BE PLACED?

RED – FIXED SENSOR BLACK – EPA HOUSING

DURING THE RESISTANCE CHECK, A READING OF LESS THAN 20 MEGAOHMS INDICATES WHAT?

DURING THE BATTERY VOLTAGE CHECK, A READING OF 22.5 VOLTS DC INDICATES WHAT?

THE EMI GASKET PROTECTS THE UNIT FROM WHAT?

THE SKK-9 IS USED IN WHAT AIRCRAFT?

THE O 2 CYLINDER SUPPLIES HOW MANY MINUTES OF AIR?

WHAT IS THE WORKING PRESSURE OF THE O 2 CYLINDER?

HOW OFTEN IS THE CALENDAR INSPECTION PERFORMED?

HOW LONG IS A NEW DROP LINE ASSEMBLY?

HOW LONG IS AN OLD DROP LINE ASSEMBLY?

HOW MUCH DISTANCE IS BETWEEN BOOT A AND BOOT B WHEN PACKING?

IN WHAT AIRCRAFT IS THE SKU-2/A UTILIZED?

THE SKU-3/A IS INSTALLED IN WHAT AIRCRAFT?

IN WHAT AIRCRAFT IS THE SKU-6/A USED?

THE SKU-7/A IS UTILIZED IN WHAT AIRCRAFT?

THE SKU-10/A IS USED IN WHAT AIRCRAFT?

THE T-45 HAS WHAT SEAT SURVIVAL KIT INSTALLED?

THE SKU-12/A IS USED IN WHAT 2 AIRCRAFT?

IN WHAT MANUAL WOULD YOU FIND THE PROCEDURES TO CLEAN OXYGEN COMPONENTS?

HOW MANY ULTRASONIC TANKS ARE NECESSARY TO CLEANING OXYGEN COMPONENTS?

THE TEMP CONTROLLER ON THE ULTRASONIC CLEANER HAS WHAT TEMPERATURE RANGE?

32°F - 212°F (0°C – 100°C)

HOW MUCH SOLUTION WILL EACH TANK HOLD?

ONE TANK CONTAINS A CLEANING AGENT/WATER SOLUTION THE OTHER TANK HAS ONLY WATER

WHAT IS THE CLEANING SOLUTION COMPRISED OF?

O 2 COMPONENT CLEANER AND DISTILLED WATER (50/50)

WHAT TYPE OF WATER IS IN THE WATER ONLY TANK?

WHEN FILLING THE TANKS YOU SHOULD STOP HOW FAR BELOW THE TOP?

WHAT COLOR IS THE GENERATOR ON/OFF SWITCH?

WHAT COLOR IS THE TANK ON/OFF SWITCH?

YOU SHOULD SAMPLE THE WATER USING Ph TEST PAPER, THE RESULTS SHOULD BE IN WHAT RANGE?

HOW LONG DOES IT TAKE FOR THE WATER TEMPERATURE IN THE TANK TO REACH 150°F?

WHEN CLEANING THE TANKS HOW MUCH CLEANING SOLUTION AND WATER ARE USED?

NO MORE THAN ? oz OF DETERGENT TO 1 gal OF WATER

WHAT SHOULD BE USED TO CLEAN O 2 LINES?

CRU-103/P DEMAND OXYGEN REGULATOR

IN WHAT MANUAL WOULD YOU FIND THE MAINTENANCE AND INSPECTION PROCEDURES FOR THE CRU-103/P?

WHAT IS THE INLET PRESSURE OF THE CRU-103?

WHAT IS THE FLOW RATE OF THE CRU-103?

WHAT IS THE ALTITUDE RANGE OF THE CRU-103?

WHAT IS THE TEMPERATURE RANGE OF THE CRU-103?

HOW MUCH DOES THE CRU-103 WEIGH?

WHAT IS THE DIMENSIONS OF THE CRU-103?

(TRUE/FALSE) THE CRU-103 SHOULD NEVER BE USED ABOVE 50,000 ft

WHAT TYPE OF PRESSURE DOES THE SAFETY PRESSURE FEATURE MAINTAIN?

THE PRESSURE-BREATHING FEATURE MAINTAINS POSITIVE PRESSURE IN THE MASK OF HOW MANY inH 2 O UP TO 34,000 ft?

THE PRESSURE-BREATHING FEATURE MAINTAINS POSITIVE OF UP TO 20.0 inH 2 O BETWEEN WHAT ALTITUDES?

OXYGEN IN WHAT PRESSURE RANGE IS SUPPLIED TO THE REGULATOR BY THE LOX SYSTEM OR OBOGS?

WHAT IS THE INSPECTION CYCLE FOR THE CRU-103?

WHEN TESTING THE CRU-103, WHAT TYPE OF NITROGEN IS USED?

WATER-PUMPED, TYPE I, CLASS I, GRADE A

WHAT IS MARKED ON NITROGEN SUPPLY CYLINDERS?

2 3” BLACK LINES “ NITROGEN OIL FREE ” IN WHITE

AIRCREW PERSONAL PROTECTIVE EQUIPMENT (CLOTHING)

GENERAL PURPOSE FLIGHT CLOTHING

WHAT MANUAL WOULD YOU USE TO PERFORM INSPECTION ON GENERAL PURPOSE FLIGHT CLOTHING?

THE TOTAL SURFACE AREA OF PATCHES ON A FLIGHT SUIT SHALL NOT EXCEED HOW MANY INCHES?

NO PATCH SHALL EXCEED HOW MANY INCHES IN ANY DIRECTION?

ARAMID CLOTH WILL NOT SUPPORT COMBUSTION BUT WILL BEGIN TO CHAR BETWEEEN WHAT TEMPERATURES?

WHAT SIZE RANGE ARE THE CWU-27/P AVAILABLE IN?

(TRUE/FALSE) A PR MAY NOT MOVE THE LEFT SLEEVE POCKET TO THE RIGHT SLEEVE

FALSE, THE SLEEVE POCKET MAY BE MOVED BASED ON THE AIRCREW MEMBER’S PREFERENCE

HOW OFTEN IS THE CWU-27/P SUBJECTED TO A CALENDAR INSPECTION?

ALL STITCHING ON THE FLIGHT SUIT SHALL BE IN WHAT STITCH RANGE?

COLD WEATHER FLYER’S COVERALLS

THE CWU-64/P IS AVAILABLE IN HOW MANY SIZES?

WHEN LAUNDERING THE CWU-67/P WHAT IS THE MAXIMUM WATER TEMPERATURE?

WHEN DRYING THE CWU-67/P WHAT IS THE MAXIMUM AIR TEMPERATURE?

THE CWU-36/P IS USED AT WHAT TEMPERATURES?

WHAT COLORS IS THE CWU-36/P AVAILABLE IN?

THE CWU-36/P SHOULD BE LAUNDERED IN WATER UP TO WHAT TEMPERATURE?

THE CWU-18/P WILL FIT WHAT WAIST SIZES?

GS/FRP-2 ARE AVAILBLE IN WHAT SIZES?

THE CWU-23/P LINER IS AVAILABLE IN HOW MANY SIZES?

(TRUE/FALSE) THE CWU-23/P IS WORN UNDER THE CWU-62/P

THE INNER LAYER OF THE CWU-23/P IS MADE OF WHAT MATERIAL?

THE OUTER LAYER OF THE CWU-23/P IS MADE OF WHAT MATERIAL?

THE CWU-72/P LINER IS AVAILABLE IN HOW MANY SIZES?

WHAT DO THE LAYERS OF THE CWU-72/P CONSIST OF?

100% OLEFIN MICROFIBER INSULATION BETWEEN TWO LAYERS OF HIGH TEMP RESISTANT ARAMID FABRIC

INFORMATION ABOUT ANTI-G GARMENTS CAN BE OBTAINED FROM WHAT MANUAL?

WHAT ARE THE TWO ANTI-G GARMENTS MOST COMMONLY USED BY THE NAVY?

(TRUE/FALSE) THE CSU-15/P WILL REPLACE THE CSU-13B/P

FALSE, THE CSU-13B/P WILL REPLACE THE CSU-15/P

HOW MANY SIZES ARE THE CSU-13B/P AVAILABLE IN?

HOW OFTEN IS THE ANTI-G GARMENT SUBJECTED TO CALENDAR INSPECTIONS?

DURING THE LEAK TEST, THE GARMENT SHOULD BE INFLATED TO WHAT psig?

DURING THE LEAK TEST THE PRESSURE SHALL NOT DROP HOW MANY psig IN THE FIRST 30 SECONDS?

HOW OFTEN IS THE CSU-21/P22P-16 SUBJECTED TO SPECIAL INSPECTIONS?

HOW MANY SIZES IS THE CSU-21/P22P-16 AVAILABLE IN?

THE CSU-21/P22P-16 IS LEAK TESTED USING WHAT TEST SET?

WHERE CAN A PR FIND INFORMATION ABOUT ANTI-EXPOSURE ASSEMBLIES?

WHAT ARE THE TWO TYPES OF ANTI-EXPOSURE ASSEMBLIES?

ANTI-EXPOSURE ASSEMBLIES ARE REQUIRED IF THE AIR TEMPERATURE IS WHAT?

ANTI-EXPOSURE ASSEMBLIES ARE REQUIRED IN WHAT WATER TEMPERATURES?

ANTI-EXPOSURE ASSEMBLY USE IS AT THE DISCRETION OF THE CO BETWEEN WHAT WATER TEMP RANGE?

THE CWU-79/P IS AVAILABLE IN HOW MANY SIZES?

HOW OFTEN IS THE CWU-79/P SUBJECTED TO SPECIAL INSPECTIONS?

HOW LONG MAY AN CWU-79/P REMAIN IN SERVICE?

12 YEARS FROM THE DATE OF MANUFACTURE

THE CWU-83/P WILL PROTECT THE WEARER FROM HYPOTHERMIA FOR HOW LONG?

(TRUE/FALSE) THE CWU-83/P IS COLOR-CODED BY SIZE

A SMALL CWU-83/P HAS WHAT COLOR TRIM?

(TRUE/FALSE) A LARGE CWU-83/P HAS NO COLOR CONTRAST

AN XXXLG CWU-83/P HAS WHAT COLOR TRIM

NON-COMBAT EQUIPPED PASSENGERS

WHAT IS THE SERVICE LIFE OF AN CWU-83/P?

(TRUE/FALSE) THE A/P22P-6 IS CONSTANT WEAR

THE CWU-62/P ARE AVAILABLE IN HOW MANY SIZES?

THE CWU-62C/P IS AVAILABLE IN HOW MANY SIZES?

HOW MANY SIZES ARE CWU-75/P AVAILABLE IN?

HOW MANY SIZES ARE THE SRU-25/P AVAILABLE IN?

AIRCREW PERSONAL PROTECTIVE EQUIPMENT (HELMETS AND MASKS)

HELMET ASSEMBLIES FOR ROTARY WING AIRCRAFT

IN WHAT MANUAL WOULD YOU FIND MAINTENANCE AND INSPECTION PROCEDURES FOR HELMETS?

THE HGU-84/P IS AVAILABLE IN HOW MANY SIZES?

WHAT COLOR VISORS CAN BE USED WITH AN HGU-84/P?

NEUTRAL, CLEAR, GRADIENT, AMBER, AND NEODYMIUM

WHAT PART OF THE HELMET ABSORBS MOST OF THE IMPACT FORCE?

HELMETS ARE TAPED IN ACCORDANCE WITH WHAT PUBLICATION?

OPNAVINST 3710.7 (GENERAL NATOPS)

THE HELMET IS TESTED WITH WHAT TEST SET?

ENHANCED PRESSURE-DEMAND OXYGEN MASK SYSTEMS

THE MBU-23(V)2/P IS USED IN WHAT AIRCRAFT?

THE MBU-23(V)/P IS AVAILABLE IN HOW MANY SIZES?

4 SM. NARROW, MED. NARROW, MED. WIDE, LG. WIDE

HOW OFTEN ARE MBU-23(V)/P SUBJECTED TO CALENDAR INSPECTIONS?

WHAT IS USED TO SANITIZE A MBU-23(V)/P?

A 1/3 CUP OF BLEACH MIXED W/ 1 gal OF WATER

狠狠撸

PR QUIZ

Recommended

More Related Content

Recently uploaded (20)

Featured (20)

PR QUIZ