More Related Content
What's hot (20)
Viewers also liked (6)
Similar to Radwin 2000 3.5_brochure (20)
Radwin 2000 3.5_brochure
- 1. Product Portfolio RADWIN 2000 3.5 GHz Portfolio Carrier Grade Point-to-Point Solutions in 3.4 - 3.7 GHzProduct Highlights Up to 100 Mbps net aggregate throughput OFDM technology for nLOS performance Advanced MIMO and Diversity technology IP + Native TDM (up to 16 E1s/T1s) Long range - up to 120 Km/75 miles Enhanced QoS & networking features Asymmetric capacity- fixed or adaptive channel allocation Multiple Point-to-Point configuration Extremely fast and easy to install 5,10, 20 MHz channel bandwidth RADWIN 2000 3.5 GHz solutions deliver high-end performance in the 3.4-3.7 GHz spectrum bands. The point-to-point solutions provide up to 100 Mbps net aggregate throughput and a 鍖exible combination of native TDM (up to 16 E1s/T1s) and Ethernet, enabling operators to cost-effectively support converged IP + TDM networks. The solutions operate in symmetric and in adaptive asymmetric modes, enabling operators to optimize link capacity and range. RADWIN 2000 C-Series 3.5 GHz Solutions High Capacity PtP for Backhaul RADWIN 2000 C-Series 3.5 GHz solutions deliver 100 Mbps net aggregate throughput and up tp 16 E1s/T1s. RADWIN 2000 X-Series 3.5 GHz Solutions Optimized for Broadband Access RADWIN 2000 X-Series 3.5 GHz solutions provide up to 20 Mbps net aggregate capacity and up to 4 T1s or 3 E1s, and are optimized for broadband access applications. Target Markets & Applications RADWINs solutions enable 3.5 GHz frequency owners to utilize their spectrum and deliver high capacity while reducing costs and increasing revenue generation. Fixed Operators & WISPs Fixed operators and WISPs can use RADWIN 2000 3.5 GHz solutions to provide broadband access to corporate clients and meet guaranteed Service Level Agreements (SLAs). Operators can backhaul Wi-Fi hot zones and last mile networks as well as provide broadband to underserved and remote areas. Cellular Carriers Carriers can utilize RADWIN 2000 3.5 GHz solutions to backhaul IP and TDM traf鍖c from base stations, thus eliminating reccurring microwave license fees, reducing the cost of backhaul infrastructure and achieving overall lower total cost of ownership.
- 2. Specifications Mechanical Dimensions and Weight ODU with Integrated Antenna: 37.1cm(w) x 37.1cm(h) x 11cm(d); 3.5 kg / 7 lbs ODU Connectorized: 19.5cm(w) x 27.0cm(h) x 8.0cm(d); 1.8 kg / 3.6 lbs Power Power Consumption <35W (IDU + ODU), <25W (ODU+PoE device) Environmental Operating Temperatures ODU: -35属C - 60属C / -31属F to 140属F IDU: 0属C to 50属C / 32属F to 122属F Humidity ODU: 100% condensing, IP67 (totally protected against dust and against immersion up to 1m) IDU-C: 90% non-condensing Safety FCC/IC (cTUVus) UL 60950-1, UL 60950-22, CAN/CSA C22.2 60950-1, CAN/CSA C22.2 60950-22 ETSI EN/IEC 60950-1, EN/IEC 60950-22 EMC FCC CFR47 Class B, Part15, Subpart B ETSI EN 300 386, EN 301 489-1, EN 301 489-4 CAN/CSA-CEI/IEC CISPR 22-04 Class B AS/NZS CISPR 22-2004 Class B RADWIN 2000 C-Series RADWIN 2000 X-Series Configuration Architecture ODU: Outdoor Unit with Integrated Antenna (21 dbi) or Connectorized Unit for External Antenna IDU: Indoor Unit or PoE device IDU to ODU Interface Outdoor CAT-5e cable; Maximum cable length: 100m Maximum Throughput 100 Mbps net aggregate and up to 16 E1s/T1s 20 Mbps net aggregate and up to 3 E1s/4 T1s Radio Radio Regulations 3.650 - 3.675 GHz FCC 47CFR, Part 90 Restricted Mode 3.450 - 3.650 GHz IC RSS 192, issue-3 3.400-3.700 GHz EN 302 326-2 V1.2.2 3.400 - 3.700 GHz Universal Range Up to 120 Km /75 miles Channel Bandwidth 5,10, 20 MHz 5 MHz Modem Operations Single chain or 2X2 Diversity or 2X2 MIMO Modulation Adaptive modulation and coding (BPSK/QPSK/16QAM/64QAM) Max Tx Power 25 dBm Channel Minimum Step 1 MHz under 3.650-3.675 FCC/IC Band Restricted Mode 250 KHz under 3.450-3.650 IC Band and 3.400-3.700 Universal Duplex Technology TDD Error Correction FEC k = 1/2, 2/3, 3/4, 5/6 Encryption AES 128 TDD Synchronization Inter site and Intra site synchronization ( up to 16 collocated links ) Ethernet Number of Ports 2 in IDU-C and IDU-E; 1 in PoE device 10/100BaseT with Auto-Negotiation (IEEE 802.3u) Framing/Coding IEEE 802.3 QoS 4 level queues based on ToS, 802.1P VLAN 802.1Q, 802.1P and QinQ Tagging (supported in IDU-C and IDU-E RW-71XX) Link Symmetry Adaptive or Fixed Asymmetric Maximum Information Rate Con鍖gurable in steps of 1Kbps Latency Latency 3 msec (typical) Service Protection Built in support: 1+1 and Ring topology TDM Number of Ports Up to 16E1s/ T1s Up to 3 E1s/4 T1s Timing Independent timing per port, Tx and Rx Latency Con鍖gurable: 5-20 msec (default: 8 msec) Service Protection Monitored Hot Standby (MHS) 1+1 in IDU-C Corporate Headquarters T. +972.3.766.2917 E. sales@radwin.com www.radwin.com The RADWIN name is a registered trademark of RADWIN Ltd. Specifications are subject to change without prior notification. 息 All rights reserved, December 2010. RW20003.5ProductBrochure-01/12.10