際際滷

際際滷Share a Scribd company logo

Routers.ppt

kirbadh
kirbadh

Routers connect different computer networks and forward data packets between them by reading the address information in each packet to determine the ultimate destination. A router contains a routing table with information about connected networks and uses this to determine the best path for packets to travel through multiple networks to reach their destination. There are two main types of routers: core routers connect different cities while edge routers connect users and hosts to networks.

1 of 10
Prepared by: Dheeraj Pathak JNU,JAIPUR
Router is a device which connects different networks-frequently over a large distances. A router is a device that forwards data packets between computer networks, creating an overlay internetwork.
A router is connected to two or more data lines from different networks. When a data packet comes in on one of the lines, the router reads the address information in the packet to determine its ultimate destination. A data packet is typically forwarded from one router to another through the networks that constitute the internetwork until it gets to its destination node. It contains a routing table in which all information about the address of connected networks.
Routers.ppt
Router Internal Components Console Auxiliary Interfaces RAM NVRAM Flash ROM RAM - Packet buffers, running configurations, running IOS ROM - Rom Monitor, Baby IOS (Rxboot) NVRAM - Backup configurations, Config register Flash - IOS
Routers.ppt
There are two types of router : Core router: core router is used to connect different cities. CISCO 12000 series is ex. of core router. Provide EDGE router: this router is used to connect users/hosts. CISCO 7600 series is ex. of provide EDGE router.
Router limits the collision domain. Router can function on LAN & WAN Router can connects different media& architectures. Router can determine best path/route for data to reach the destination. Router can filter the broadcasts.
Router is more expensive than Hub, Bridge & Switch. Router only works with routable protocol. Routing updates consume bandwidth. Increase latency due to greater degree of packet filtering.
Thank You!!

More Related Content

Routers.ppt

  • 2. Router is a device which connects different networks-frequently over a large distances. A router is a device that forwards data packets between computer networks, creating an overlay internetwork.
  • 3. A router is connected to two or more data lines from different networks. When a data packet comes in on one of the lines, the router reads the address information in the packet to determine its ultimate destination. A data packet is typically forwarded from one router to another through the networks that constitute the internetwork until it gets to its destination node. It contains a routing table in which all information about the address of connected networks.
  • 5. Router Internal Components Console Auxiliary Interfaces RAM NVRAM Flash ROM RAM - Packet buffers, running configurations, running IOS ROM - Rom Monitor, Baby IOS (Rxboot) NVRAM - Backup configurations, Config register Flash - IOS
  • 7. There are two types of router : Core router: core router is used to connect different cities. CISCO 12000 series is ex. of core router. Provide EDGE router: this router is used to connect users/hosts. CISCO 7600 series is ex. of provide EDGE router.
  • 8. Router limits the collision domain. Router can function on LAN & WAN Router can connects different media& architectures. Router can determine best path/route for data to reach the destination. Router can filter the broadcasts.
  • 9. Router is more expensive than Hub, Bridge & Switch. Router only works with routable protocol. Routing updates consume bandwidth. Increase latency due to greater degree of packet filtering.