sadeghi Cv- ENG - new ver
0 likes39 views
This document contains the resume of Ahmad Sadeghi Nezhad, who has 10 years of experience as a project planner/scheduler and project controller for building, software, and industrial projects. He holds a Master's degree in Industrial Engineering and a B.Sc. in Industrial Engineering. His skills include MS Office, MS Project, Primavera P6, and familiarity with Primavera Expedition. He has worked as head of planning and project control for various companies on residential, industrial, and infrastructure projects in Iran and Dubai. He also has experience teaching MS Project, P6, and applied project management.
1 of 2
Download to read offline
Recommended
Mahmoud Abdelrehim_CV
Mahmoud Abdelrehim_CVMahmoud Abdelrehim
Ìý
This document is a resume for Mahmoud Abdelrehim Ahmed, a structural engineer from Egypt. It outlines his education, including a pre-masters in structural engineering from Cairo University and a bachelor's degree in civil engineering from Cairo University. It also details his work experience as a structural engineer for two different engineering firms in Egypt, and lists the structural design and analysis skills and software proficiency.Hammd Judeh
Hammd JudehHammad Judeh
Ìý
Hammad Nafez Judeh is a civil engineer born in Palestine in 1988. He received a BA in civil engineering from An-Najah National University in 2010. He has over 10 years of experience working in structural engineering and project management in Saudi Arabia. Currently he is the Head of Structural Department at Al-Arifi Group of Companies, where he oversees the design and construction of large university projects. He has expertise in structural design, modeling, and cost estimation software.Eng. Mahmoud taha
Eng. Mahmoud tahamahmoud taha
Ìý
Mahmoud Mohamed Taha is seeking a position in civil engineering. He has a bachelor's degree in civil engineering from Port Said University. His skills include problem solving, communication, working under pressure, teamwork, attention to detail, research, and English fluency. His work experience includes projects with Arab Contractors and as a site supervisor and engineer for the Egyptian armed forces and tunnels project. He has training in Microsoft Office, AutoCAD, SAP, Primavera, safety analysis, and Civil 3D analysis. References are available upon request.C.V. Omar Sherif[1]![C.V. Omar Sherif[1]](https://cdn.slidesharecdn.com/ss_thumbnails/68f03c67-ca51-4c10-8690-4da9a340a737-150210003103-conversion-gate01-thumbnail.jpg?width=560&fit=bounds)
C.V. Omar Sherif[1]Omar ead
Ìý
Omar Eid Zaki Sherif is an Egyptian surveyor with over 15 years of experience working on infrastructure projects in Egypt and Saudi Arabia. He has a Bachelor's degree in geography from University of El-Monofiyah and is proficient in surveying instruments and software. His previous roles include working as a surveyor for construction companies in Egypt and Saudi Arabia where he has participated in projects such as roads, bridges, tunnels, residential developments, and more.Civil engineer kashif hussain..pdf
Civil engineer kashif hussain..pdfKashif Hussain
Ìý
Kashif Hussain is a civil engineer from Pakistan seeking a position in civil engineering. He has over 5 years of experience as a civil engineer in the UAE and Pakistan. He is educated with a Bachelor of Technology in Civil Engineering and additional certifications. His experience includes overseeing design and construction of civil projects, managing budgets and staff, and ensuring safety and quality standards are met. He is proficient in AutoCAD and various computer programs.CV new'-No photo
CV new'-No photoMOUSA ABU NEMAH
Ìý
Mousa I.Abu Nemah has over 18 years of experience as a mechanical manager and senior engineer in construction projects. He holds a B.Sc. in Mechanical Engineering from the University of Jordan. He has worked extensively in Saudi Arabia and Jordan managing mechanical systems for hospitals, hotels, universities and other large construction projects. He is a member of the Jordanian Engineers Association and formerly the Engineering Saudi Council.Mohammed mahmoud shams cv
Mohammed mahmoud shams cvMohammed Shams
Ìý
Mohammed Mahmoud Shams Abd El-Rahman is seeking a position as a site or office engineer where he can apply his academic background in civil engineering. He has experience working with AutoCAD, SAP2000, ETABS, and other engineering programs. He completed his BSc in civil engineering from Cairo University and has internship experience working on infrastructure projects in Egypt and Saudi Arabia. He is proficient in English and Arabic and is skilled at working under pressure as part of a team.Hafedh_CV
Hafedh_CVHafedh Al Halhli
Ìý
Hafedh Mohammed Salim Al Halhali is seeking a position as a General Maintenance or CRE Reliability Engineer. He has a B.Sc. in Industrial Engineering from Sultan Qaboos University. His work experience includes over 10 years as a Well Service Maintenance/CRE Reliability Engineer for Schlumberger where he held various roles including Maintenance Supervisor and Engineer. He has extensive training and certifications in areas such as maintenance, reliability, safety, and project management. His skills include CAD, programming, Microsoft Office, and maintenance leadership.CV Engr Ashraf_Eshra_English Summery
CV Engr Ashraf_Eshra_English SummeryAshraf Eshra
Ìý
Engineer Ashraf Eshra has over 29 years of experience in maintenance planning, project planning, and training for the oil and gas industry. He has a Bachelor's degree in mechanical engineering, as well as several diplomas and certifications. He is proficient in the MAXIMO computerized maintenance management system and has implemented CMMS for several oil and gas companies. Engineer Eshra has worked for companies such as GUPCO, AFPC, Foster Wheeler, and ADMA in maintenance planning and engineering roles.Norhan Kamel Ahmed (C.V)2 Resume
Norhan Kamel Ahmed (C.V)2 ResumeNorhan Kamel
Ìý
This resume is for Norhan Kamel Ahmed Azab, an Egyptian civil engineer seeking a professional job to further enhance her qualifications and experience. She has a BSc in Civil Engineering from Helwan University with excellent grades, including on her graduation project involving designs for a hotel, bridge pier, and underground garage. Her skills include expertise with engineering software like AutoCAD, SAFE, ETABS, SAP 2000, and she has training and site engineering experience. She is a hard worker with strong computer, language, and soft skills who is interested in reading, basketball, and swimming.Waleed Fuad Mostafa
Waleed Fuad Mostafawaleed fuad
Ìý
Waleed Fuad Shalaby is a civil engineer seeking a challenging role to expand his experience. He graduated from Ain Shams University in 2011 and has over 6 years of experience in construction project management, site engineering, and technical office roles. His experience includes projects in construction, installation of power infrastructure, and maintenance and renovation. Currently he works as a planning, cost control, purchasing and coordinator engineer at Giza Integrated Solutions.CV _E
CV _Ehossam essa
Ìý
This document is a curriculum vitae for Essa Hossam Abobakr Mohammed. It provides personal information such as his name, address, phone number, email, nationality and date of birth. It then outlines his professional experience, including internships at CNH/IVECO and working as an office technical manager and lieutenant in the Egyptian army. It also lists his education and training courses. Finally, it details his skills including being fluent in Italian, English, Arabic and having technical, computer and organizational abilities from his work experience.Ahmed M. Osman_CV_2016
Ahmed M. Osman_CV_2016Ahmed zakria
Ìý
This document summarizes the experience and qualifications of Ahmed Mohammed Osman, including over 11 years of experience in civil engineering and construction project management. He currently works as a project manager for Alkayan Consulting Engineering in Saudi Arabia, where he is responsible for project supervision, planning, monitoring, and quality control. Previously he held project engineer and manager roles in Sudan and the UAE, gaining experience on infrastructure, residential, and industrial construction projects.C.V_Amina Mohamed Abdel-Mohsen
C.V_Amina Mohamed Abdel-Mohsenamina_mohamed
Ìý
This document contains the resume of Amina Mohamed Abd El-Mohsen, an Egyptian aerospace engineer. She graduated from Cairo University in 2013 with a degree in aeronautics and aerospace engineering and a GPA of 73.5%. Her graduation project involved designing and building an octocopter. She has skills in areas like microcontroller interfacing, programming, CAD software, and project management. She is currently working as a laboratory engineer and seeks new opportunities in her field.Salman Kazemzadeh-CV
Salman Kazemzadeh-CVsalman kazemzadeh
Ìý
This document is a confidential resume for Salman Kazemzadeh. It outlines his education in information and communications technology and industrial engineering. It lists courses and skills in project management, planning, scheduling software, dashboards, and AutoCad. For experience, it describes Salman's roles as a senior project planner and controller or head of project planning for several industrial contracting companies in oil, gas, mining, and rail signaling from 2008 to the present.ST-CV01
ST-CV01saeid teymoori
Ìý
This document is a curriculum vitae for Saeid Teymoori that summarizes his work experience and education. It outlines his experience designing vehicle production processes and technical documentation as an expert in Iran-Khodro Engineering Center from 2000-2004. It also details his roles as a designer, project coordinator, and warehouse manager from 2006-2013 at Qeshm engineering company and a zinc plant. He received a Bachelor's degree in Mechanical Engineering in 1994 and a Master's degree in the same field in 2002. His most recent roles from 2013 to present include project coordination, software design, and research on cost engineering and analysis optimization.mohamed khalifa elghayesh 3
mohamed khalifa elghayesh 3Mohammed Elghayesh
Ìý
Mohamed khalifa Elghayesh is a single, Egyptian civil engineer born in Damanhur, Egypt who graduated from Alexandria University in 2012. He has worked for several construction companies and the Ministry of Water Resources and Irrigation since 2013, gaining experience in areas like road construction, water structures, surveying, and project management. His skills include engineering design, construction oversight, scheduling, budgeting, team leadership, and computer-aided design programs. He has participated in several training courses covering topics in water infrastructure, structural design, irrigation and drainage laws, and software programs.Ahmed Ragab C.V
Ahmed Ragab C.VAhmed Eldemerdash
Ìý
This document provides details about Ahmed Ragab Eldemerdash, including his contact information, education, qualifications, skills, and work experience. He has a Bachelor's Degree in Civil Engineering from MISR Higher Institute for Engineering & Technology in Egypt. His work experience includes positions as a Steel Structure Engineer, Technical Office Engineer, QC Civil Inspector, and Civil Engineer, where he gained experience in areas such as steel structure erection, quantity surveying, quality control, and project management. He is knowledgeable in various engineering fields and software such as AutoCAD, SAP2000, and Microsoft Office.2016 c.v
2016 c.vMOUSA ABU NEMAH
Ìý
Mousa I.Abu Ne'mah is a mechanical engineer with 18 years of experience managing mechanical systems for large construction projects in Jordan and Saudi Arabia. He holds a B.Sc. in Mechanical Engineering from the University of Jordan and is a member of the Jordanian Engineers Association and Saudi Engineering Council. His experience includes managing mechanical works for hospitals, universities, malls, and other projects valued over $1 billion total. He is proficient in English and Arabic and seeks a senior engineering or site management position.C.v saad ali -
C.v saad ali -Saad Ali
Ìý
The document is a job application from Saad Ali for the position of Surveyor. Some key details:
- Saad Ali has over 5 years of experience as a surveyor in Egypt and Saudi Arabia working on projects like hospitals, commercial buildings, and infrastructure.
- He has strong computer skills including AutoCAD, Surfer, and Civil 3D. He is also proficient in GPS devices and total stations.
- In addition to surveying skills, Saad Ali has experience coordinating with engineers, creating reports, and calculating areas, volumes, and network budgets.CV
CVislam nagi
Ìý
The document provides personal and professional details for Islam Mohamed Kamal Nagi. It includes his name, address, contact information, education history including a Bachelor's degree in Aerospace and Aeronautics Engineering from Cairo University. It also outlines his professional experiences working for the Egyptian Banks Co. and Egyptian Airforce where he performed maintenance and repair on aircraft. The document lists his computer skills, training, languages, and additional details.Resume-Rocky
Resume-RockyRocky Kizhakkel
Ìý
Rocky Thomasbabu Kizhakkel is seeking an opportunity to enhance his skills and knowledge. He has a B.E. in Mechanical Engineering from St. John College of Engineering & Technology in Mumbai. Currently he works as a Trainee Engineer for SODEXO India Facility Management services Ltd, where his responsibilities include implementing asset management projects, conducting client presentations, and ensuring inventory details are uploaded to the Maximo tool. He has also worked as a Production planning and controlling Executive for GEMSONS PRECESION ENGINEERING Pvt ltd.Yehia_CV_2016.PDF
Yehia_CV_2016.PDFYehia El Tawil
Ìý
Yehia Mamdouh Abd El Kader El Tawil is an electromechanical engineer with experience in mechanical engineering, sales, and maintenance. He received his Bachelor's degree in electromechanical engineering from Alexandria University in 2013. Currently, he works as an executive mechanical engineer for Petrojet on a tunnel boring machine project for the Suez Canal, where he implements site designs and supervises welding, lifting, and cutting activities. Previously he held roles as a sales and technical office engineer for MANTRAC and a mechanical maintenance engineer for ACIP.Cengiz kılavuz 135061-ödev3
Cengiz kılavuz 135061-ödev3cengiz klavuz
Ìý
Cengiz Kılavuz is a civil engineering student at the European University of Lefke with previous work experience as a technical and fiscal administrator at KLV Construction Company. He graduated from business administration college in 2005 and high school as a building technician, and holds certificates in AutoCAD engineering, IdeCAD engineering, and leadership. Kılavuz wants to start his own business to be his own boss and utilize his talents in business administration. His hobbies include travelling, economy, and business.Ahmed ezz eldin fahmy cv
Ahmed ezz eldin fahmy cvAhmed Ezz-eldin
Ìý
This document contains personal and professional details about Ahmed Ezz eldin Fahmy, including his contact information, education history, work experience, computer skills, projects, courses, training, languages, and student activities. He is a civil engineer from Egypt currently working as a Project Engineer in Saudi Arabia. Some of his past roles include working as a Technical Office Engineer on road projects in Egypt and a technical office/site engineer for a real estate company.Ahmed serag 5-1-2017
Ahmed serag 5-1-2017Ahmed Serag
Ìý
Ahmed Serag is a civil engineer with over 1 year of experience in project management and technical office roles. He has skills in Primavera, AutoCAD, and quantity surveying. He received awards from the Egyptian Engineers Syndicate and Cairo University. His experience includes roles at Rooya Group, as a freelance planning engineer, and at Strand for trading & construction. He has a B.Sc. in Civil Engineering from Cairo University with honors.c.v_ahmed_samy
c.v_ahmed_samyahmed samy
Ìý
This document provides a summary of Ahmed Samy EL Said Aly's personal and professional details. It includes his education, skills, training experience, and work history on various construction projects in Egypt and Dubai from 2007 to present. His roles have included station manager, deputy station manager, and site manager for civil works, arrangement works, and finishing works on metro rail and building projects.CV-Acdm - 1
CV-Acdm - 1Khalid AL-Ubaidy
Ìý
The document is a curriculum vitae for Khalid FayeqSideek AL-Tahiry AL-Ubaidy that outlines his educational qualifications including degrees in civil engineering, structural engineering, and a PhD in structural engineering. It also details his professional experience working as a lecturer and instructor at universities in Iraq and the UAE and as a structural consultant on projects in Iraq, UAE, Qatar, and other countries over 28 years.ENGLISH RESUME 6
ENGLISH RESUME 6Ali Khorsandi
Ìý
Ali Khorsandi is an industrial engineer with over 15 years of experience in project planning and control for oil, gas, petrochemical and power plant projects. He holds a BSc and MSc in Industrial Engineering. His experience includes planning, cost control, scheduling, risk management, and using project management software like Primavera, Microsoft Project, and AutoCAD. He is currently working as a planning and project control manager for an oil field development project.ENGLISH RESUME 6
ENGLISH RESUME 6Ali Khorsandi
Ìý
Ali Khorsandi is an industrial engineer with over 15 years of experience in project planning and control for oil, gas, and petrochemical companies. He holds a BSc and MSc in Industrial Engineering. His experience includes planning, cost control, scheduling, risk management, and more for various projects in Iran. He is proficient in Primavera, Microsoft Project, and other project management and computer software.More Related Content
What's hot (20)
CV Engr Ashraf_Eshra_English Summery
CV Engr Ashraf_Eshra_English SummeryAshraf Eshra
Ìý
Engineer Ashraf Eshra has over 29 years of experience in maintenance planning, project planning, and training for the oil and gas industry. He has a Bachelor's degree in mechanical engineering, as well as several diplomas and certifications. He is proficient in the MAXIMO computerized maintenance management system and has implemented CMMS for several oil and gas companies. Engineer Eshra has worked for companies such as GUPCO, AFPC, Foster Wheeler, and ADMA in maintenance planning and engineering roles.Norhan Kamel Ahmed (C.V)2 Resume
Norhan Kamel Ahmed (C.V)2 ResumeNorhan Kamel
Ìý
This resume is for Norhan Kamel Ahmed Azab, an Egyptian civil engineer seeking a professional job to further enhance her qualifications and experience. She has a BSc in Civil Engineering from Helwan University with excellent grades, including on her graduation project involving designs for a hotel, bridge pier, and underground garage. Her skills include expertise with engineering software like AutoCAD, SAFE, ETABS, SAP 2000, and she has training and site engineering experience. She is a hard worker with strong computer, language, and soft skills who is interested in reading, basketball, and swimming.Waleed Fuad Mostafa
Waleed Fuad Mostafawaleed fuad
Ìý
Waleed Fuad Shalaby is a civil engineer seeking a challenging role to expand his experience. He graduated from Ain Shams University in 2011 and has over 6 years of experience in construction project management, site engineering, and technical office roles. His experience includes projects in construction, installation of power infrastructure, and maintenance and renovation. Currently he works as a planning, cost control, purchasing and coordinator engineer at Giza Integrated Solutions.CV _E
CV _Ehossam essa
Ìý
This document is a curriculum vitae for Essa Hossam Abobakr Mohammed. It provides personal information such as his name, address, phone number, email, nationality and date of birth. It then outlines his professional experience, including internships at CNH/IVECO and working as an office technical manager and lieutenant in the Egyptian army. It also lists his education and training courses. Finally, it details his skills including being fluent in Italian, English, Arabic and having technical, computer and organizational abilities from his work experience.Ahmed M. Osman_CV_2016
Ahmed M. Osman_CV_2016Ahmed zakria
Ìý
This document summarizes the experience and qualifications of Ahmed Mohammed Osman, including over 11 years of experience in civil engineering and construction project management. He currently works as a project manager for Alkayan Consulting Engineering in Saudi Arabia, where he is responsible for project supervision, planning, monitoring, and quality control. Previously he held project engineer and manager roles in Sudan and the UAE, gaining experience on infrastructure, residential, and industrial construction projects.C.V_Amina Mohamed Abdel-Mohsen
C.V_Amina Mohamed Abdel-Mohsenamina_mohamed
Ìý
This document contains the resume of Amina Mohamed Abd El-Mohsen, an Egyptian aerospace engineer. She graduated from Cairo University in 2013 with a degree in aeronautics and aerospace engineering and a GPA of 73.5%. Her graduation project involved designing and building an octocopter. She has skills in areas like microcontroller interfacing, programming, CAD software, and project management. She is currently working as a laboratory engineer and seeks new opportunities in her field.Salman Kazemzadeh-CV
Salman Kazemzadeh-CVsalman kazemzadeh
Ìý
This document is a confidential resume for Salman Kazemzadeh. It outlines his education in information and communications technology and industrial engineering. It lists courses and skills in project management, planning, scheduling software, dashboards, and AutoCad. For experience, it describes Salman's roles as a senior project planner and controller or head of project planning for several industrial contracting companies in oil, gas, mining, and rail signaling from 2008 to the present.ST-CV01
ST-CV01saeid teymoori
Ìý
This document is a curriculum vitae for Saeid Teymoori that summarizes his work experience and education. It outlines his experience designing vehicle production processes and technical documentation as an expert in Iran-Khodro Engineering Center from 2000-2004. It also details his roles as a designer, project coordinator, and warehouse manager from 2006-2013 at Qeshm engineering company and a zinc plant. He received a Bachelor's degree in Mechanical Engineering in 1994 and a Master's degree in the same field in 2002. His most recent roles from 2013 to present include project coordination, software design, and research on cost engineering and analysis optimization.mohamed khalifa elghayesh 3
mohamed khalifa elghayesh 3Mohammed Elghayesh
Ìý
Mohamed khalifa Elghayesh is a single, Egyptian civil engineer born in Damanhur, Egypt who graduated from Alexandria University in 2012. He has worked for several construction companies and the Ministry of Water Resources and Irrigation since 2013, gaining experience in areas like road construction, water structures, surveying, and project management. His skills include engineering design, construction oversight, scheduling, budgeting, team leadership, and computer-aided design programs. He has participated in several training courses covering topics in water infrastructure, structural design, irrigation and drainage laws, and software programs.Ahmed Ragab C.V
Ahmed Ragab C.VAhmed Eldemerdash
Ìý
This document provides details about Ahmed Ragab Eldemerdash, including his contact information, education, qualifications, skills, and work experience. He has a Bachelor's Degree in Civil Engineering from MISR Higher Institute for Engineering & Technology in Egypt. His work experience includes positions as a Steel Structure Engineer, Technical Office Engineer, QC Civil Inspector, and Civil Engineer, where he gained experience in areas such as steel structure erection, quantity surveying, quality control, and project management. He is knowledgeable in various engineering fields and software such as AutoCAD, SAP2000, and Microsoft Office.2016 c.v
2016 c.vMOUSA ABU NEMAH
Ìý
Mousa I.Abu Ne'mah is a mechanical engineer with 18 years of experience managing mechanical systems for large construction projects in Jordan and Saudi Arabia. He holds a B.Sc. in Mechanical Engineering from the University of Jordan and is a member of the Jordanian Engineers Association and Saudi Engineering Council. His experience includes managing mechanical works for hospitals, universities, malls, and other projects valued over $1 billion total. He is proficient in English and Arabic and seeks a senior engineering or site management position.C.v saad ali -
C.v saad ali -Saad Ali
Ìý
The document is a job application from Saad Ali for the position of Surveyor. Some key details:
- Saad Ali has over 5 years of experience as a surveyor in Egypt and Saudi Arabia working on projects like hospitals, commercial buildings, and infrastructure.
- He has strong computer skills including AutoCAD, Surfer, and Civil 3D. He is also proficient in GPS devices and total stations.
- In addition to surveying skills, Saad Ali has experience coordinating with engineers, creating reports, and calculating areas, volumes, and network budgets.CV
CVislam nagi
Ìý
The document provides personal and professional details for Islam Mohamed Kamal Nagi. It includes his name, address, contact information, education history including a Bachelor's degree in Aerospace and Aeronautics Engineering from Cairo University. It also outlines his professional experiences working for the Egyptian Banks Co. and Egyptian Airforce where he performed maintenance and repair on aircraft. The document lists his computer skills, training, languages, and additional details.Resume-Rocky
Resume-RockyRocky Kizhakkel
Ìý
Rocky Thomasbabu Kizhakkel is seeking an opportunity to enhance his skills and knowledge. He has a B.E. in Mechanical Engineering from St. John College of Engineering & Technology in Mumbai. Currently he works as a Trainee Engineer for SODEXO India Facility Management services Ltd, where his responsibilities include implementing asset management projects, conducting client presentations, and ensuring inventory details are uploaded to the Maximo tool. He has also worked as a Production planning and controlling Executive for GEMSONS PRECESION ENGINEERING Pvt ltd.Yehia_CV_2016.PDF
Yehia_CV_2016.PDFYehia El Tawil
Ìý
Yehia Mamdouh Abd El Kader El Tawil is an electromechanical engineer with experience in mechanical engineering, sales, and maintenance. He received his Bachelor's degree in electromechanical engineering from Alexandria University in 2013. Currently, he works as an executive mechanical engineer for Petrojet on a tunnel boring machine project for the Suez Canal, where he implements site designs and supervises welding, lifting, and cutting activities. Previously he held roles as a sales and technical office engineer for MANTRAC and a mechanical maintenance engineer for ACIP.Cengiz kılavuz 135061-ödev3
Cengiz kılavuz 135061-ödev3cengiz klavuz
Ìý
Cengiz Kılavuz is a civil engineering student at the European University of Lefke with previous work experience as a technical and fiscal administrator at KLV Construction Company. He graduated from business administration college in 2005 and high school as a building technician, and holds certificates in AutoCAD engineering, IdeCAD engineering, and leadership. Kılavuz wants to start his own business to be his own boss and utilize his talents in business administration. His hobbies include travelling, economy, and business.Ahmed ezz eldin fahmy cv
Ahmed ezz eldin fahmy cvAhmed Ezz-eldin
Ìý
This document contains personal and professional details about Ahmed Ezz eldin Fahmy, including his contact information, education history, work experience, computer skills, projects, courses, training, languages, and student activities. He is a civil engineer from Egypt currently working as a Project Engineer in Saudi Arabia. Some of his past roles include working as a Technical Office Engineer on road projects in Egypt and a technical office/site engineer for a real estate company.Ahmed serag 5-1-2017
Ahmed serag 5-1-2017Ahmed Serag
Ìý
Ahmed Serag is a civil engineer with over 1 year of experience in project management and technical office roles. He has skills in Primavera, AutoCAD, and quantity surveying. He received awards from the Egyptian Engineers Syndicate and Cairo University. His experience includes roles at Rooya Group, as a freelance planning engineer, and at Strand for trading & construction. He has a B.Sc. in Civil Engineering from Cairo University with honors.c.v_ahmed_samy
c.v_ahmed_samyahmed samy
Ìý
This document provides a summary of Ahmed Samy EL Said Aly's personal and professional details. It includes his education, skills, training experience, and work history on various construction projects in Egypt and Dubai from 2007 to present. His roles have included station manager, deputy station manager, and site manager for civil works, arrangement works, and finishing works on metro rail and building projects.CV-Acdm - 1
CV-Acdm - 1Khalid AL-Ubaidy
Ìý
The document is a curriculum vitae for Khalid FayeqSideek AL-Tahiry AL-Ubaidy that outlines his educational qualifications including degrees in civil engineering, structural engineering, and a PhD in structural engineering. It also details his professional experience working as a lecturer and instructor at universities in Iraq and the UAE and as a structural consultant on projects in Iraq, UAE, Qatar, and other countries over 28 years.Similar to sadeghi Cv- ENG - new ver (20)
ENGLISH RESUME 6
ENGLISH RESUME 6Ali Khorsandi
Ìý
Ali Khorsandi is an industrial engineer with over 15 years of experience in project planning and control for oil, gas, petrochemical and power plant projects. He holds a BSc and MSc in Industrial Engineering. His experience includes planning, cost control, scheduling, risk management, and using project management software like Primavera, Microsoft Project, and AutoCAD. He is currently working as a planning and project control manager for an oil field development project.ENGLISH RESUME 6
ENGLISH RESUME 6Ali Khorsandi
Ìý
Ali Khorsandi is an industrial engineer with over 15 years of experience in project planning and control for oil, gas, and petrochemical companies. He holds a BSc and MSc in Industrial Engineering. His experience includes planning, cost control, scheduling, risk management, and more for various projects in Iran. He is proficient in Primavera, Microsoft Project, and other project management and computer software.Parsa's Resume
Parsa's ResumeParsa Rezaei
Ìý
Parsa Rezaei is an Iranian civil engineer and project manager with 16 years of experience. He holds a BA in Civil Engineering and an MBA in Project Management. Rezaei has extensive experience supervising various construction projects including buildings, roads, and railways. He is proficient in Microsoft Project, AutoCAD, and has expertise in all areas of project management including integration, scope, time, cost, quality, and risk management.Khoshakhlagh(Planning & Project Control Expert) - Copy - Copy
Khoshakhlagh(Planning & Project Control Expert) - Copy - Copyakbar khoshakhlagh
Ìý
Akbar Khoshakhlagh is an industrial engineer from Azad University Firoozkooh with over 10 years of experience in project planning and control. He has worked on numerous oil, gas and mining projects in Iran. His skills include expertise in EPC project control using software like MS Project, Primavera P6, and Comfar 3. He also has teaching experience in project control software.Ardeshiri_94-2
Ardeshiri_94-2Mehrshad Ardeshiri
Ìý
Mehrsahad Ardeshiri is an experienced project manager and engineering manager in Iran. He has over 25 years of experience managing large oil, gas, and petrochemical projects. Currently, he is the Head of PMO and Deputy Project Manager for the Farashband Gas Treatment Plant Development Project. He holds a BS in Mechanical Engineering and has extensive experience in project planning, piping engineering, construction supervision, and quality control/quality assurance.English Resume-Ahmad Dorbayani
English Resume-Ahmad DorbayaniAhmad Dorbayani
Ìý
Ahmad Dorbayani is seeking a position as a Project Planning and Control Engineer with over 10 years of experience in scheduling and controlling projects to manufacture industrial gas turbines. He has a Master's degree in Industrial Engineering and is proficient in project management, planning, scheduling, risk management, and economic feasibility analysis tools and standards. His experience includes roles as a department head and expert planning engineer for companies manufacturing gas turbines and turbo compressors.Foad Zahedi-CV-EN
Foad Zahedi-CV-ENFoad Zahedi
Ìý
Foad Zahedi has over 12 years of experience in engineering, technical office management, contract management, and project control. He has worked on various civil engineering projects including dams, roads, tunnels, soil improvement, and structural strengthening. Currently he is the Technical Office Manager at Permayon Advanced Strengthening Company where he oversees technical, contractual, and tendering aspects of over 50 engineering projects.Mahmoud Ahmed Mohmed Kamal
Mahmoud Ahmed Mohmed Kamalmahmoud kamal
Ìý
Mahmoud Ahmed Mohamed Kamal is applying for a civil engineer position. He graduated from Benha University in 2014 with a degree in engineering. He has work experience as a steel and concrete structures designer, and as a bridges designer. Currently, he works as a civil site engineer for Orascom Construction. He is proficient in English and various civil engineering software programs.Resume .
Resume .Fatima Shooshtarian
Ìý
Fatemeh Shooshtarian is a structural engineer born in Tehran, Iran in 1982. She graduated from Isfahan Industrial University of Technology with a degree in structural engineering in 2005. She has over 13 years of experience as a structure expert working on projects for various companies in Iran. Her areas of expertise include modeling, analyzing, and designing industrial, commercial, residential, and retrofit structures using software like SAP2000, SAFE, ETABS, Primavera, and Pushover.Civil engineer - moutaz qudah
Civil engineer - moutaz qudahmoutaz hasan
Ìý
Moutaz HasanAl-Qudah is a civil engineer from Jordan seeking a position that allows him to utilize his technical skills and project management abilities. He has over 2 years of experience as a site and planning engineer. His education includes a Bachelor's degree in Civil Engineering from Mehran University of Engineering and Technology in Pakistan. He is proficient in AutoCAD, Primavera, Etabs, and Microsoft Office applications.Tunnel engineering workshop
Tunnel engineering workshopUniversity (VSB-TUO ) in Czech Republic
Ìý
This document invites attendees to a two-day engineering workshop on tunnel engineering design, construction, operations, and safety to be held on September 5-6, 2012 at UOD Conference Building Hall. The workshop will provide an overview of different types of tunnels including roadway tunnels, subways, highway and railway tunnels, and their design and construction. It will also cover topics like immersed tunnels, microtunneling, and collector tunnels. The objective is to increase understanding of tunnel engineering, which is important for infrastructure development in Kurdistan's mountainous terrain.job resume1
job resume1HAMMAD BASHIR
Ìý
Hammad Bashir is seeking a position as a civil engineer where he can utilize his organizational and people skills. He has a B.Sc in Civil Engineering from UCEST Lahore Leads University with a CGPA of 3.20/4.00. His experience includes internships with Public Health Engineering Department, Techno Time Construction, and MIDJAC Construction where he gained experience in areas like site planning, material quantity calculation, road construction, building construction, and water distribution system design. He is proficient in design software like AutoCAD, SAP2000, and Primavera and hopes to obtain a position that will challenge his technical abilities.Muhammad-Abdullah_s-Resume
Muhammad-Abdullah_s-ResumeMuhammad Abdullah
Ìý
Muhammad Abdullah is a civil engineer and project manager from Egypt seeking new work opportunities. He has a Bachelor's degree in civil engineering from Alexandria University and is completing a Master's degree in construction project management from Helwan University. His nearly 5 years of experience includes project engineering roles in Saudi Arabia managing construction projects and planning. He has strong technical skills in areas like structural analysis, construction planning and control, and CAD software.Masoud rahimzadeh cv
Masoud rahimzadeh cvMasoud Rahimzadeh
Ìý
Masoud rahimzadeh is an Iranian civil engineer with over 10 years of experience in dam and tunnel construction projects. He has worked on several gravity dams in Iran and Sri Lanka as both a senior engineer and deputy project manager. His areas of expertise include RCC and CVC dams, earth dams, and tunneling projects. Currently he is seeking a new position where he can continue utilizing his technical skills and experience managing civil engineering projects.Waleed shams
Waleed shamsWaleed Shams
Ìý
Waleed El-Mohands is seeking a position where he can utilize his civil engineering background and qualifications. He has a bachelor's degree in civil engineering from Aswan University and experience as a site engineer. His resume lists various technical skills, software proficiencies, training courses and certificates, as well as summer internship experiences in construction projects. He is a native Arabic speaker with very good English skills.Hesham CV - Senior Road Eng 2023.pdf
Hesham CV - Senior Road Eng 2023.pdfHeshamSaleh30
Ìý
Hesham Saleh is a senior road engineer with 18 years of experience managing road design projects. He has worked on projects in the UAE, Jordan, Liberia, Kenya, Tanzania, and Swaziland. Currently, he is a senior road engineer at QHC-AJI in the UAE, where he is responsible for managing road design projects, quantity surveying, and project cost estimation. Previously, he held road design and engineering roles in Jordan, the UAE, and with consulting firms.Javad Taghavi - Senior Project Manager - Industrial Projects - CV
Javad Taghavi - Senior Project Manager - Industrial Projects - CVJavad Taghavi
Ìý
#WOULD YOU LIKE TO EXECUTE A COMPLEX LARGE SCALE PROJECT?
#ARE YOU CONCERN ABOUT QUALITY, INCREASING TIME AND COST?
#DO YOU KNOW, KNOWLEDGE AND EXPERIENCE WILL ENSURE THE SUCCESS OF YOUR PROJECT?
SO, A <<project>> WITH <<vast>> AND <<experience>> IS GUARANTEE OF THE SUCCESS OF YOUR PROJECT.
Mohamed Kamal CV.pdf
Mohamed Kamal CV.pdfMohamedKamalAbdAlaal
Ìý
Mohamed Kamal Abdalaal Afiffy is a civil engineer seeking a structural engineering position. He has a Master's in Construction Management from AAST and a PRMG diploma from AUC. Currently he works as a Maintenance Planner & Development Engineer at GASCO, where he helps plan preventative maintenance and develops corrective maintenance plans. Previously he has worked on structural steel projects in Dubai and Abu Dhabi as a Design Engineer. He is proficient in several CAD and structural engineering software programs.Bilal Zaheer CV
Bilal Zaheer CVBilal Zaheer
Ìý
Bilal Zaheer is seeking a position that allows him to apply his professional and theoretical knowledge. He has over 5 years of work experience in safety coordination and engineering. His most recent role was as an Assistant Safety Coordinator at Unilever Pakistan, where he conducted audits, incident investigations, and developed a safety app. Previously he worked as a Project Engineer at SMEC Oil and Gas and as a Maintenance and Operations Engineer. He holds a B.S. in Mechanical Engineering from Ghulam Ishaq Khan Institute of Engineering Sciences and Technology.uss
ussumaji sopan sakate
Ìý
Umaji Sakate is applying for a position as a project manager in civil engineering. He has over 20 years of experience managing complex construction projects in various countries. He holds a diploma in civil engineering and has expertise in areas like construction methodology, quality assurance, and project management. Currently residing in Muscat, Oman, he is seeking a senior level position that utilizes his successful experience in related fields.sadeghi Cv- ENG - new ver
- 1. Ahmad Sadeghi Nezhad Cell: +989124571730 A_sadeghi82@Yahoo.com Planning Engineer Page 1 Professional Profile ProjectPlanner/Scheduler And Project Control. 10 Years Experience In Building Projects, Software ProjectsAnd Industrial Projects (2005-2015). Education  Master`s Degree inIndustrial Engineering- management & Efficiency(2011-2013). Amirkabir UniversityOf Technology- Iran  B.Sc. of Industrial Engineering Department of Planning & Systems Analyses (2001- 2005).AzadUniversity- Iran Software Skills  Expert In MS Office  Expert In MS Project  Expert In Primavera - P6  Familiar In Primavera - Expedition Training  ProjectManagement (PMBOK) At MSI Academy – Iran  Primavera - P6 At MSI Academy - Iran  ProjectManagement – Earned Value Management At MSI Academy – Iran  ComparisonBetweenMSP & P6 Seminar At MSI Academy – Iran Work Experience o Azad universityTehran: Supervisor Of Planning & Project Control Office o Biolab Co: Manager Of Methods & Systems Department o AV Institute : Head of Planning & Project Control 1- Iran-Poland Intercultural Project – Tehran & Lublin (Poland) o Kariz khavar Co : HeadOf Planning & Project Control 1- Building of Residential Complex – Gazvin 2- Building of Mosque in Shahed University – Tehran
- 2. Ahmad Sadeghi Nezhad Cell: +989124571730 A_sadeghi82@Yahoo.com Planning Engineer Page 2 o Dasht Sakht KaroonCo : Head of Planning & Project Control 1- Building of 19-StoreyResidential Tower- Dubai 2- Building of Residential Settlements – Dubai 3- Building of Accounting Collage in Allame University –Tehran o Mehrab OmranCo : Head of Planning & Project Control 1-Improvement Kan Valley – Tehran o Tara engineeringCo : Head of Planning & Project Control 1- Water piping in Industrial Complex- Arvand 2- Introduction Of Pump Stationin Steel Complex –Ahvaz 3 - Introduction Of Zamyad Factory(Car assembly)- Kashan o Naghsh Peyvand Co : Headof Planning & Project Control 1- RoofedBuilding in Steel Mills- Ahvaz o South Highway Co : Expert of Planning & Project Control 1- Introduction Of Super Highway – Bostan o Nama saz Co : Expert of Planning & Project Control 1- Building Of Jalali School – Ahvaz 2- Building Of Ramin Residential Complex – Ahvaz o Mohsen Saze Co: Expert of Planning& Project Control 1- Structure Of Memorial Building in Talaee`e – Ahvaz 3- Structure Of Memorial Building in Ramezan – Khoramshahr Teaching Experience  Teaching MS Project & P6 Software At Jihad- Tehran University Academy – Tehran - Iran  Teaching Applied ProjectManagement At Urban Home – Tehran – Iran