Semi jacquard by mamun,Milon,Plabon 36 batch(BUTex)
Download as PPTX, PDF
4 likes1,218 views
This document summarizes the components and functions of a semi jacquard knitting machine. The main cylinder has 39 pegs where the top 3 are fixed and the remaining 36 control individual needles to produce designs in courses of up to 36 wales. Each peg box acts as a feeder to produce a single course. The 38 pegs have left and right sides, and as the cylinder rotates anti-clockwise, the needles are engaged with the pegs on the left side first to knit loops or create misses and tucks based on which pegs are pressed.
Semi jacquard by mamun,Milon,Plabon 36 batch(BUTex)
- 1. Presentation on semi jacquard knitting machine
- 3. There are 39 pegs . top 3 are fixed or common butts. rest 36 for design (means in a repeat of a course there may be 36 wales maximum)
- 4. Needles of different butt positions . each peg controlles a single needle.
- 6. o Each peg box makes a single course like a feeder and can produce 36 wales in a repeat of a course
- 7. There are 38 pegs . top 2 are fixed Left right
- 8. As cylinder moves anti clockwise ,needles get peg of a peg box at the left side first. If no peg is pressed all needles are active and can produce all knit loops. If left (peg) is pressed , it press selector and disconnect corresponding needle and forms miss loop If only right (peg) is pressed , it press selector and disconnect corresponding needle after forming a half loop and it forms tuck loop
- 11. 1st box produce all knit loops. 2nd box will produce as per design. Design will be
- 14. Cam box
- 15. All parts are attached without cam box.
- 16. Cam box
- 17. Pin or connector
- 18. jack
- 19. needle
- 20. needle Selector @ jack
- 21. Md . Abdullah al mamun 2010 1 051