SGS Test
1 like233 views
This document discusses decimals and their properties. It defines decimals as numbers written with a decimal point separating the whole numbers and fractional portions. It then explains place value of decimals and how to order, round, add, subtract, and multiply decimals by following specific steps for each operation. The document aims to teach the basics of working with decimal numbers.
1 of 8
Download to read offline
Recommended
Rounding off numbers
Rounding off numbersDeeptiTAS
油
This document explains how to round numbers to the nearest ten, hundred, and thousand. For rounding to the nearest ten, examine the ones place digit and compare it to 5; if less than 5, replace the ones place with 0 and leave the tens place unchanged, if greater than or equal to 5, replace the ones place with 0 and add 1 to the tens place. The same process is followed for rounding to the nearest hundred and thousand, examining the tens place and hundreds place respectively and adjusting that place value or the place to its left based on the comparison to 5. Examples are provided to illustrate rounding 54 to 50, 65 to 70, and 56 to 60 when rounding to the nearest ten.Rounding Numbers (Math 4)
Rounding Numbers (Math 4)menchreo
油
This document provides instructions for rounding whole numbers to the nearest place value. It explains that you identify the digit in the rounding place, look at the digit to its right, and then either retain the rounding digit if it is 0-4 or add one to the rounding digit if it is 5-9 before replacing all digits to the right with zeros. It then provides examples of rounding the numbers 5,364 to the nearest thousands and 28,593 to the nearest ten thousands.Rounding Numbers
Rounding Numbersmilenia86
油
The document contains examples of rounding numbers to various place values using a rounding poem. It provides steps for rounding numbers to the nearest ten, hundred, thousand, ten thousand, and hundred thousand. Examples include rounding 368,971 to 370,000, 35,327 to 35,000, and $5.87 to $6.00. The rounding poem states to find the number, look at the place value to the right, round up if it's 5 or more and ignore if it's 4 or less.1-6 Rounding Whole Numbers/Decimals
1-6 Rounding Whole Numbers/DecimalsRudy Alfonso
油
The document provides step-by-step instructions for rounding whole numbers and decimals to the nearest place value. It demonstrates rounding the numbers 3,840 to the nearest hundred and 56.08 to the nearest tenth. Both examples show the steps of finding the relevant place value, looking at the digit to the right, and determining whether to round up or down based on the digit. The rounded answers are 3,800 for 3,840 and 56.10 for 56.08, as each number is closer to those values than the other options.Oprations Of Decimal Numbers
Oprations Of Decimal NumbersNMSpirit
油
This document provides instructions for performing basic operations with decimals such as addition, subtraction, multiplication, and division. It explains how to align the decimals and describes the steps for each operation. Examples are provided for adding, subtracting, multiplying, and dividing decimals. The document also covers comparing and converting fractions and decimals, with examples of how to convert a fraction to a decimal and vice versa. It concludes with contact information.Rounding Whole Numbers
Rounding Whole NumbersSteven Diaz
油
Rounding whole numbers involves finding compatible numbers that are close in value to the original number to make arithmetic computations easier. To round, we determine which compatible number (multiples of 10, 100, 1000, etc.) the given number is closer to on a number line. If the digit to the right of the place value we are rounding to is 5 or higher, we round up. If it is 4 or lower, we round down. Examples are provided to illustrate rounding to the nearest ten, hundred, and thousand.Math 5
Math 5JohnTitoLerios
油
This document discusses rounding numbers and provides rules and examples. It defines a rounded number as having about the same value as the original number but being less exact. It then gives two rules for rounding numbers: if the digit after the place value being rounded is 5 or greater, round up, and if it is 4 or less, round down. Examples are provided to demonstrate rounding numbers to the nearest ten, hundred, thousand, etc.Ch 2 Decimals Powerpoint
Ch 2 Decimals Powerpointknouff001
油
This document discusses decimals, place value, comparing and ordering decimals, and converting fractions to decimals. It provides examples of decimals representing quantities like money, ratios, and measurements. Key concepts covered include:
1) The value of digits in a decimal is based on powers of ten, with digits to the left of the decimal point representing whole numbers and digits to the right representing fractional values.
2) Decimals can be compared by examining the place value of the digits, reading from left to right.
3) Fractions can be converted to decimals by dividing the numerator by the denominator.Rounding
RoundingJerly Cayanan
油
This document provides instructions for rounding numbers to the nearest ten or hundred. It includes a poem to memorize for rounding to the nearest ten: find the number, look at the digit in the tens place, if it is 4 or less ignore it but if it is 5 or more add 1 to the digit in the tens place. Examples are provided to demonstrate rounding 978 to the nearest ten (980) and 327 to the nearest hundred (300). The key steps for rounding to the nearest hundred are also given.Nats Decimal Keynote
Nats Decimal Keynoteguest85f32
油
A decimal is a number written in the base ten system, with a decimal point separating the ones place from the tenths place. Places to the right of the decimal point show parts of a whole, with tenths being the first place and hundredths, thousandths, etc following. When ordering decimals from least to greatest, zeros at the end do not change the value, and the number of digits does not matter - only the first digit in each number is compared. Decimals are rounded the same as whole numbers, rounding up if over 5 and down if under 5. Adding and subtracting decimals involves lining up the decimal points and performing the operation as with whole numbers, while multiplying requires multiplying as usual and placing the decimal pointRounding quick
Rounding quicklearningissweet
油
The document provides instructions for rounding numbers to various places using a memorization poem. It gives examples of rounding 368,971 to the nearest ten thousand, 35,327 to the nearest thousand, $5.87 to the nearest dollar, and 4.871 to the nearest tenth place using the rounding rules and poem.Rounding
Roundingmonicaramirezmtz
油
The document provides instructions and examples for rounding numbers to various places - nearest ten thousand, thousand, dollar, hundred, tens, and hundred thousands. It demonstrates rounding the numbers 368,971 to the nearest ten thousand, 35,327 to the nearest thousand, $5.87 to the nearest dollar, and 289,962 to the nearest hundred thousands according to the rounding rules.Rounding Decimal Numbers
Rounding Decimal Numbersdalow65
油
Here are the steps to round each number as indicated in Exercise 3.2 on pages 105 and 106:
a. 4.231 to 2 decimal places is 4.23
b. 0.75 to 1 decimal place is 0.8
c. 2.076 to 2 decimal places is 2.08
d. 0.698 to 2 decimal places is 0.70
e. 23.357 to 1 decimal place is 23.4
f. 48.6929 to 3 decimal places is 48.693
g. 639.678 to the nearest hundred is 640
h. 12.364 to the nearest ten is 12.4
i. 95.89 to the nearest ten is 100
j.1 ESO - UNIT 05 - DECIMAL NUMBERS
1 ESO - UNIT 05 - DECIMAL NUMBERSGogely The Great
油
1. This document discusses decimal numbers and operations involving decimals. It covers place value of decimals, ordering and comparing decimals, rounding decimals, and how to perform the basic math operations of addition, subtraction, multiplication, and division on decimals. It also discusses approximating square roots of decimals.Ordering decimals
Ordering decimalsemteacher
油
To order decimals from least to greatest, follow these steps:
1. Line up the decimals with their decimal points aligned.
2. Add zeros to the end of decimals with fewer decimal places.
3. Compare the decimals place value by place value from left to right.
Ordering decimals from greatest to least follows the same steps.Decimals
DecimalsPunita Verma
油
The document defines decimals and the decimal system. It discusses place value and how numbers are written with the decimal point separating whole numbers from fractional amounts. It provides examples of how to write, round, add, subtract, multiply and divide decimals. It also explains how to convert a decimal to a fraction by multiplying the top and bottom of a decimal fraction by powers of ten.Rounding Off Larger Numbers
Rounding Off Larger NumbersJohdener14
油
This document provides instructions for rounding numbers to the nearest tens, hundreds, and thousands. It explains that to round up, the digit to the right of the rounding place must be 5 or more, and to round down the digit must be less than 5. Examples are given rounding numbers to the nearest thousand and ten thousand. An activity at the end asks students to round numbers in a worksheet to the nearest thousand and ten thousand.Multiplication of decimals
Multiplication of decimalsSchool
油
To multiply decimals, you can:
1. Multiply the numbers as usual and place the decimal point in the product by counting decimal places. For example, 0.7 * 0.5 = 0.35.
2. Use visual representations like grids to count the number of squares representing the product.
3. Convert decimals to fractions and multiply the fractions. For example, 0.7 = 7/10, 0.5 = 5/10, so 0.7 * 0.5 = 7/10 * 5/10 = 35/100 = 0.35.
4. Use long multiplication for more complex decimals like 0.548 * 0.254 = 0.139192.Demonstration Presentation
Demonstration PresentationDennis Reynoso
油
This document provides an overview and objectives of a modular workbook on decimal numbers. The overview explains that the workbook will help students understand decimal numbers, including reading, writing, naming, comparing and ordering decimals. It will also cover rounding decimals. The objectives state that after completing the workbook, students should be able to know the language of decimals, read and write decimals using place value, compare and order decimals, and round decimals according to rules.2.basic of decimal
2.basic of decimalDreams4school
油
The document provides information about decimals, including:
1) Decimals are a numbering system based on tens where a number is written as a whole number with a decimal point separating the whole number from fractional parts.
2) Decimals can be added, subtracted, multiplied, and divided following specific rules such as aligning decimal points and counting decimal places.
3) Fractions can be converted to decimals by dividing the numerator by the denominator.Fraction To Decimal
Fraction To DecimalDonna Furrey
油
This document provides instructions for converting decimals to fractions and fractions to decimals. It explains that the place value of the last digit determines the denominator of the fraction. For decimals, the place value is determined by powers of ten. For fractions, the place value determines where the digit goes in the decimal. It also addresses situations where the denominator is not a power of ten, in which case the fraction needs to be divided.Decimal powerpoint presentation
Decimal powerpoint presentationg2desai
油
The document discusses decimals, including how to read and write decimals, adding and subtracting decimals by lining up the decimal points, and converting between decimals, fractions, and percentages. Key examples and steps are provided for adding, subtracting, and converting between decimal, fraction, and percentage forms.3.4 rounding decimals
3.4 rounding decimalsRachel
油
The document discusses rounding decimals to a given place value by looking at the digit in the place to the right. If the digit is 4 or less, round down. If the digit is 5 or greater, round up. Examples are provided of rounding decimals to the hundredths, tenths and ones place. The document also discusses rounding very small numbers to the place value of the leading digit, which is the first non-zero digit reading from left to right. Examples of rounding decimals to the leading digit are given.Adding Fraction
Adding FractionJenHilario1
油
To add fractions, there are three steps: 1) Make the denominators the same by finding the least common denominator, 2) Add the numerators and keep the denominator the same, 3) Simplify the fraction if possible. The document then explains how to find the least common denominator by multiplying the individual denominators together. It also discusses how to add mixed fractions by first converting them to improper fractions, then adding the numerators and keeping the denominator the same, and finally converting back to a mixed fraction.CoNverTinG FraCtioNs tO DeCiMaLs
CoNverTinG FraCtioNs tO DeCiMaLsAkane Moon
油
This document discusses converting fractions to decimals. It begins by asking students to explain fractions and decimals. Then it provides two methods for converting fractions to decimals: using proportions or dividing. Examples are shown for converting 1/4, 3/4, and 4/5 to decimals. The document suggests an activity of sorting Skittles by color into fractions and decimals. It concludes by directing students to an online game to practice converting fractions and decimals.Decimal Keynote
Decimal Keynoteguestec802
油
A decimal is a number written in the base ten system, with a decimal point separating the ones place from the tenths place. Places to the right of the decimal point show parts of a whole, with tenths being the first place and hundredths, thousandths, etc following. When ordering decimals from least to greatest, zeros at the end do not change the value, and the number of digits does not matter - only the first digit in each number is compared. Decimals are rounded in the same way as whole numbers, rounding up if above 5 and down if below. Adding and subtracting decimals involves lining up the decimal points and performing the operation as with whole numbers, while multiplying requires multiplying as usual and placing the decimalPlace Value Review
Place Value Reviewmrsdow
油
The document provides information and examples about place value concepts including:
- Place value means the value of a digit depends on its position in the number.
- Numbers can be written in standard, expanded, and decimal forms.
- Steps for comparing and ordering numbers include lining them up and comparing digits left to right.
- Rounding involves underlining the place value to round to and adjusting the underlined digit up or down based on the digit to its right.
Decimal
DecimalFUKRE YAAR
油
The document provides an overview of decimals, including what they are, their history, place value, comparing, rounding, adding, subtracting, multiplying, and dividing decimals. Key points covered include how decimals are used to represent fractional values, the importance of place value when working with decimals, and techniques for rounding, adding, subtracting, multiplying and dividing decimals accurately.Motivation
MotivationAnn Rachelle
油
Decimals are commonly used in measurements and commerce. They allow numbers to be represented on the number line through repeated subdivision into tenths. A decimal number locates a point on the number line through the place value of its digits. Decimals extend the place value concept for whole numbers to include tenths, hundredths, thousandths, and so on. While widely used today, decimals were not commonly adopted until the early 17th century. Decimals can represent both rational and some irrational numbers and are useful for approximations and measurements recorded to a given accuracy.More Related Content
What's hot (17)
Rounding
RoundingJerly Cayanan
油
This document provides instructions for rounding numbers to the nearest ten or hundred. It includes a poem to memorize for rounding to the nearest ten: find the number, look at the digit in the tens place, if it is 4 or less ignore it but if it is 5 or more add 1 to the digit in the tens place. Examples are provided to demonstrate rounding 978 to the nearest ten (980) and 327 to the nearest hundred (300). The key steps for rounding to the nearest hundred are also given.Nats Decimal Keynote
Nats Decimal Keynoteguest85f32
油
A decimal is a number written in the base ten system, with a decimal point separating the ones place from the tenths place. Places to the right of the decimal point show parts of a whole, with tenths being the first place and hundredths, thousandths, etc following. When ordering decimals from least to greatest, zeros at the end do not change the value, and the number of digits does not matter - only the first digit in each number is compared. Decimals are rounded the same as whole numbers, rounding up if over 5 and down if under 5. Adding and subtracting decimals involves lining up the decimal points and performing the operation as with whole numbers, while multiplying requires multiplying as usual and placing the decimal pointRounding quick
Rounding quicklearningissweet
油
The document provides instructions for rounding numbers to various places using a memorization poem. It gives examples of rounding 368,971 to the nearest ten thousand, 35,327 to the nearest thousand, $5.87 to the nearest dollar, and 4.871 to the nearest tenth place using the rounding rules and poem.Rounding
Roundingmonicaramirezmtz
油
The document provides instructions and examples for rounding numbers to various places - nearest ten thousand, thousand, dollar, hundred, tens, and hundred thousands. It demonstrates rounding the numbers 368,971 to the nearest ten thousand, 35,327 to the nearest thousand, $5.87 to the nearest dollar, and 289,962 to the nearest hundred thousands according to the rounding rules.Rounding Decimal Numbers
Rounding Decimal Numbersdalow65
油
Here are the steps to round each number as indicated in Exercise 3.2 on pages 105 and 106:
a. 4.231 to 2 decimal places is 4.23
b. 0.75 to 1 decimal place is 0.8
c. 2.076 to 2 decimal places is 2.08
d. 0.698 to 2 decimal places is 0.70
e. 23.357 to 1 decimal place is 23.4
f. 48.6929 to 3 decimal places is 48.693
g. 639.678 to the nearest hundred is 640
h. 12.364 to the nearest ten is 12.4
i. 95.89 to the nearest ten is 100
j.1 ESO - UNIT 05 - DECIMAL NUMBERS
1 ESO - UNIT 05 - DECIMAL NUMBERSGogely The Great
油
1. This document discusses decimal numbers and operations involving decimals. It covers place value of decimals, ordering and comparing decimals, rounding decimals, and how to perform the basic math operations of addition, subtraction, multiplication, and division on decimals. It also discusses approximating square roots of decimals.Ordering decimals
Ordering decimalsemteacher
油
To order decimals from least to greatest, follow these steps:
1. Line up the decimals with their decimal points aligned.
2. Add zeros to the end of decimals with fewer decimal places.
3. Compare the decimals place value by place value from left to right.
Ordering decimals from greatest to least follows the same steps.Decimals
DecimalsPunita Verma
油
The document defines decimals and the decimal system. It discusses place value and how numbers are written with the decimal point separating whole numbers from fractional amounts. It provides examples of how to write, round, add, subtract, multiply and divide decimals. It also explains how to convert a decimal to a fraction by multiplying the top and bottom of a decimal fraction by powers of ten.Rounding Off Larger Numbers
Rounding Off Larger NumbersJohdener14
油
This document provides instructions for rounding numbers to the nearest tens, hundreds, and thousands. It explains that to round up, the digit to the right of the rounding place must be 5 or more, and to round down the digit must be less than 5. Examples are given rounding numbers to the nearest thousand and ten thousand. An activity at the end asks students to round numbers in a worksheet to the nearest thousand and ten thousand.Multiplication of decimals
Multiplication of decimalsSchool
油
To multiply decimals, you can:
1. Multiply the numbers as usual and place the decimal point in the product by counting decimal places. For example, 0.7 * 0.5 = 0.35.
2. Use visual representations like grids to count the number of squares representing the product.
3. Convert decimals to fractions and multiply the fractions. For example, 0.7 = 7/10, 0.5 = 5/10, so 0.7 * 0.5 = 7/10 * 5/10 = 35/100 = 0.35.
4. Use long multiplication for more complex decimals like 0.548 * 0.254 = 0.139192.Demonstration Presentation
Demonstration PresentationDennis Reynoso
油
This document provides an overview and objectives of a modular workbook on decimal numbers. The overview explains that the workbook will help students understand decimal numbers, including reading, writing, naming, comparing and ordering decimals. It will also cover rounding decimals. The objectives state that after completing the workbook, students should be able to know the language of decimals, read and write decimals using place value, compare and order decimals, and round decimals according to rules.2.basic of decimal
2.basic of decimalDreams4school
油
The document provides information about decimals, including:
1) Decimals are a numbering system based on tens where a number is written as a whole number with a decimal point separating the whole number from fractional parts.
2) Decimals can be added, subtracted, multiplied, and divided following specific rules such as aligning decimal points and counting decimal places.
3) Fractions can be converted to decimals by dividing the numerator by the denominator.Fraction To Decimal
Fraction To DecimalDonna Furrey
油
This document provides instructions for converting decimals to fractions and fractions to decimals. It explains that the place value of the last digit determines the denominator of the fraction. For decimals, the place value is determined by powers of ten. For fractions, the place value determines where the digit goes in the decimal. It also addresses situations where the denominator is not a power of ten, in which case the fraction needs to be divided.Decimal powerpoint presentation
Decimal powerpoint presentationg2desai
油
The document discusses decimals, including how to read and write decimals, adding and subtracting decimals by lining up the decimal points, and converting between decimals, fractions, and percentages. Key examples and steps are provided for adding, subtracting, and converting between decimal, fraction, and percentage forms.3.4 rounding decimals
3.4 rounding decimalsRachel
油
The document discusses rounding decimals to a given place value by looking at the digit in the place to the right. If the digit is 4 or less, round down. If the digit is 5 or greater, round up. Examples are provided of rounding decimals to the hundredths, tenths and ones place. The document also discusses rounding very small numbers to the place value of the leading digit, which is the first non-zero digit reading from left to right. Examples of rounding decimals to the leading digit are given.Adding Fraction
Adding FractionJenHilario1
油
To add fractions, there are three steps: 1) Make the denominators the same by finding the least common denominator, 2) Add the numerators and keep the denominator the same, 3) Simplify the fraction if possible. The document then explains how to find the least common denominator by multiplying the individual denominators together. It also discusses how to add mixed fractions by first converting them to improper fractions, then adding the numerators and keeping the denominator the same, and finally converting back to a mixed fraction.CoNverTinG FraCtioNs tO DeCiMaLs
CoNverTinG FraCtioNs tO DeCiMaLsAkane Moon
油
This document discusses converting fractions to decimals. It begins by asking students to explain fractions and decimals. Then it provides two methods for converting fractions to decimals: using proportions or dividing. Examples are shown for converting 1/4, 3/4, and 4/5 to decimals. The document suggests an activity of sorting Skittles by color into fractions and decimals. It concludes by directing students to an online game to practice converting fractions and decimals.Similar to SGS Test (20)
Decimal Keynote
Decimal Keynoteguestec802
油
A decimal is a number written in the base ten system, with a decimal point separating the ones place from the tenths place. Places to the right of the decimal point show parts of a whole, with tenths being the first place and hundredths, thousandths, etc following. When ordering decimals from least to greatest, zeros at the end do not change the value, and the number of digits does not matter - only the first digit in each number is compared. Decimals are rounded in the same way as whole numbers, rounding up if above 5 and down if below. Adding and subtracting decimals involves lining up the decimal points and performing the operation as with whole numbers, while multiplying requires multiplying as usual and placing the decimalPlace Value Review
Place Value Reviewmrsdow
油
The document provides information and examples about place value concepts including:
- Place value means the value of a digit depends on its position in the number.
- Numbers can be written in standard, expanded, and decimal forms.
- Steps for comparing and ordering numbers include lining them up and comparing digits left to right.
- Rounding involves underlining the place value to round to and adjusting the underlined digit up or down based on the digit to its right.Decimal
DecimalFUKRE YAAR
油
The document provides an overview of decimals, including what they are, their history, place value, comparing, rounding, adding, subtracting, multiplying, and dividing decimals. Key points covered include how decimals are used to represent fractional values, the importance of place value when working with decimals, and techniques for rounding, adding, subtracting, multiplying and dividing decimals accurately.Motivation
MotivationAnn Rachelle
油
Decimals are commonly used in measurements and commerce. They allow numbers to be represented on the number line through repeated subdivision into tenths. A decimal number locates a point on the number line through the place value of its digits. Decimals extend the place value concept for whole numbers to include tenths, hundredths, thousandths, and so on. While widely used today, decimals were not commonly adopted until the early 17th century. Decimals can represent both rational and some irrational numbers and are useful for approximations and measurements recorded to a given accuracy.Class 3 LET US REVISE 
Class 3 LET US REVISE KiranIdhateArmy
油
let us revise - 3 digit numbers- number name , place value,expanded form, numbers on abacus ,comparing numbers, ascending and descending order, even and odd numbers , cardinal and ordinal numbers , addition, subtraction , multiplication and division.decimals. .pptx
decimals. .pptxKayraTheressGubat
油
Decimal numbers have a dot that separates the whole numbers from the fractional or partial numbers. There are several key operations for decimals: comparing decimals involves looking at the same place value; rounding decimals involves dropping digits and increasing or keeping the last digit as appropriate; adding and subtracting decimals involves lining up the decimals; multiplying decimals involves multiplying the numbers and counting total decimal places in the factors; and dividing decimals uses moving the decimals to represent division of whole numbers, with remainders requiring annexing zeros. Repeating decimals occur when the division has a non-terminating repeating portion.
FS Maths Level 2- March 08, 2023 (Decimals).
FS Maths Level 2- March 08, 2023 (Decimals).LeadAcademy3
油
The document provides information about working with decimals, including:
- Adding, subtracting, multiplying, and dividing decimals through examples of each process. Steps are outlined such as lining up decimal points and moving them as needed.
- Comparing and ordering decimals by looking at each digit place value from left to right and eliminating numbers based on comparisons.
- Estimating decimal values by rounding to various place values like the nearest dollar or tenth. This allows estimating totals, quantities, or amounts when exact calculations aren't needed.
- Practice problems are provided throughout for skills like addition, multiplication, long division, comparing values, and word problems involving monetary amounts with decimals.Math 2 Times Table, Place Value and Decimals : Grades 3 - 4
Math 2 Times Table, Place Value and Decimals : Grades 3 - 4Julia Guo
油
Learn and practice multiplication and division, dividing fractions, or using algebra to solve complex word problems, students are building their math fluency and using deductive reasoning skills to problem solve.
In VSA Math, our youngest students build foundational skills in early mathematical skills, including number and pattern recognition, geometry, measurement, and problem-solving skills. With our experienced PKG2 teachers, students learn to love counting, adding, and seeing shapes in the world around them.
With teacher modeling and guided and independent practice, each virtual class features a combination of on-screen learning and drawing and writing exercises.
209313998_Math_Let_Reviewer.ppt.pdf
209313998_Math_Let_Reviewer.ppt.pdfssuser2d1201
油
A numeration system uses symbols and rules to represent numbers. The decimal system uses ten digits (0-9) and is based on groups of ten and place value.
To summarize mixed decimals, fractions, percentages, and averages: read whole numbers first, then the decimal or fraction; change fractions and mixed numbers to improper fractions before calculating; use formulas to convert between fractions, decimals, and percentages.
Divisibility rules help determine if a number is divisible by another number based on digital patterns or sums.Math 2 Times Table, Place Value and Decimals : Grades 3 4
Math 2 Times Table, Place Value and Decimals : Grades 3 4VSA Future LLC
油
Learn and practice multiplication and division, dividing fractions, or using algebra to solve complex word problems, students are building their math fluency and using deductive reasoning skills to problem solve.Chapter 2 Study Guides
Chapter 2 Study Guides嗚M看姻庄温鞄嗚
油
1) A mixed number has a whole number part and a fractional part, while an improper fraction has a numerator larger than the denominator.
2) To change between mixed numbers and improper fractions, you can multiply or divide the whole number by the denominator and add or subtract the numerator.
3) When adding, subtracting, multiplying or dividing fractions, you often need a common denominator or need to use reciprocals.Decimal point rules pdf
Decimal point rules pdfkatiavidal
油
This document provides instructions for comparing decimals, multiplying decimals, and dividing decimals. It explains that when comparing decimals, you should line up the decimal points and compare place values from right to left. It also outlines the steps for multiplying decimals, which include ignoring the decimal points, counting total decimal places, and placing the decimal point in the product based on the number of decimal places. For dividing decimals, it describes how to handle situations when the decimal is in the dividend or divisor, such as moving decimal points and placing the decimal point in the quotient above the dividend's decimal point.mathematics about numbers read and write whole numbers in the millions
mathematics about numbers read and write whole numbers in the millionsbalqisnurazizah3
油
qwertyuiopasdfghjkldecimals-110726084207-phpapp01.pptx
decimals-110726084207-phpapp01.pptxSer Louis Fabunan
油
The document discusses decimals and their relationship to fractions. It defines decimals as numbers with values less than 1 that are written with a decimal point. Decimals extend the place value system to include values smaller than a whole unit. The value of each place decreases by a factor of 10 as you move right of the decimal point. Decimals can be added, subtracted, multiplied and divided following specific procedures. Decimals can represent either terminating or repeating decimals which can be converted to equivalent fractions.Decimals
DecimalsNeilfieOrit2
油
The document discusses place value with decimals. It explains that the name of a decimal is based on the number of places to the right of the decimal point, with tenths, hundredths and thousandths as examples. Mixed decimals contain both whole numbers and decimals. To read decimals correctly, say "and" at the decimal point and read whole numbers to the left and fractional decimals to the right. Extra zeros after the decimal do not change a number's value. The document provides practice problems for writing decimals, identifying place values, writing decimals as words, and adding and subtracting decimals by lining up the decimals.Unit 1 Whole Numbers
Unit 1 Whole Numbersmdonham
油
This document provides information on whole numbers and operations involving whole numbers such as addition, subtraction, multiplication, division, rounding, place value, and order of operations. Key concepts covered include the definition and purpose of place value, procedures for performing calculations, properties of operations like the commutative and associative properties, and examples of word problems involving whole numbers.
Place value handout
Place value handoutLiznatividad
油
10 is related to place value in our base-10 number system. In our base-10 system, each place value represents a power of 10. The ones place represents 10^0, the tens place represents 10^1, the hundreds place represents 10^2, and so on. This place value system allows us to easily compare and order numbers based on their value in each place.Recently uploaded (20)
Redefining Efficiency in AI: The Impact of 1.58-bit LLMs on the Future of Com...
Redefining Efficiency in AI: The Impact of 1.58-bit LLMs on the Future of Com...Gregor Lyttek
油
This whitepaper examines how emerging 1.58-bit quantization approaches, exemplified by BitNet b1.58, address critical challenges in LLM deployment without compromising model performance. Our analysis demonstrates up to 65% reduction in energy consumption, 72% decrease in memory footprint, and inference speed improvements of 2.71x compared to traditional models. We present a comprehensive implementation framework for organizations seeking to balance computational efficiency with AI performance objectives.
"Scaling Product Mindset: From Individual Ideas to Team Culture", Oksana Holu...
"Scaling Product Mindset: From Individual Ideas to Team Culture", Oksana Holu...Fwdays
油
Developing a product mindset is a long-term process that requires effective communication, team engagement, and a culture of experimentation. When developers feel like they are part of the product, they go beyond just codingthey create real value for users."Surfing the IT Waves: How Not to Drown in the Information Ocean", Serhii Nem...
"Surfing the IT Waves: How Not to Drown in the Information Ocean", Serhii Nem...Fwdays
油
In the world of IT, where technologies develop at the speed of light, it's crucial to understand not only what to learn but also when to do it. In this presentation, we will explore a practical approach to the professional development of an IT specialist and figure out how to effectively track industry innovations without compromising your main work.
We will discuss what truly influences your value as a developer, when it's worth investing time in learning new technologies, and how this relates to other important skills - from English proficiency to understanding the business value of projects.
The presentation will be useful for both beginners who are just entering the job market and experienced developers who strive to remain competitive.UiPath Automation Developer Associate Training Series 2025 - Session 6
UiPath Automation Developer Associate Training Series 2025 - Session 6DianaGray10
油
Welcome to session 6 where we will cover Error and Exceptional handling, along with Debugging Studio and an Introduction to Logging in Studio.
The required self-paced lessons that you need to complete are here:
Error and Exception Handling in Studio, Debugging in Studio, Introduction to Logging in Studio - 2 modules - 1h 15m - https:/academy.uipath.com/courses/error-and-exception-handling-in-studio
Debugging in Studio - 2 modules - 2h - https:/academy.uipath.com/courses/debugging-in-studio
Introduction to Logging in Studio - 2 modules - 1h 15m - https:/academy.uipath.com/courses/introduction-to-logging-in-studioReal World RAG: 5 common issues encountered when building Real World Applicat...
Real World RAG: 5 common issues encountered when building Real World Applicat...walterheck3
油
A deck explaining 5 of the bigger issues encountered when building a real-world RAG application like lorelai.app.
This deck was used for a presentation by Walter Heck during a DEMAND event.Best Crane Manufacturers in India Industry Leaders & Innovations.pdf
Best Crane Manufacturers in India Industry Leaders & Innovations.pdfHercules Hoists
油
Indias crane manufacturing industry is witnessing significant growth due to increasing infrastructure projects, industrial expansion, and technological advancements. Leading manufacturers focus on innovation, integrating automation and IoT-based monitoring systems to enhance operational efficiency. Companies produce a variety of cranes, including overhead, jib, and mobile cranes, tailored to different sectors like steel, power, and shipping. Indian manufacturers prioritize safety, adhering to international standards such as ISO and IS certifications. With a strong supply chain and competitive pricing, they cater to both domestic and global markets. The industrys emphasis on quality, reliability, and customization makes India a key player in crane manufacturing.
CSUN 2025 - Personalization of Accessible Charts and Graphs.pptx
CSUN 2025 - Personalization of Accessible Charts and Graphs.pptxystein Moseng
油
際際滷s from our presentation on personalization as a concept in dataviz accessibility, at CSUN 2025.WSO2Con 2025 - How an Internal Developer Platform Lets Developers Focus on Code
WSO2Con 2025 - How an Internal Developer Platform Lets Developers Focus on CodeWSO2
油
Cloud-native development often involves setting up infrastructure, managing security, and integrating servicestasks that take time away from coding. An internal developer platform (IDP) streamlines these complexities, enabling developers to focus on building business logic.
This lab demonstrates how an IDP supports a hybrid development approach, where developers run some components locally while consuming cloud services seamlessly. Instead of manually configuring databases, authentication, or API gateways, they leverage platform capabilities for rapid iteration.
Well walk through a real-world scenario where a developer:
Onboards quickly with an architect-defined application structure.
Develops in a hybrid environment, consuming cloud APIs, databases, and AI services while iterating locally.
Uses Choreo-managed authentication without dealing with OAuth2 intricacies.
Discovers and reuses microservices and APIs instead of rebuilding them.
Debugs efficiently without deploying all dependencies locally.
Ensures security and compliance automatically, catching vulnerabilities early.
By the end, youll see how an IDP accelerates onboarding, enhances security, and simplifies cloud-native developmentso developers can focus on building great applications instead of managing infrastructure."AI-Driven Automation for High-Performing Teams: Optimize Routine Tasks & Lea...
"AI-Driven Automation for High-Performing Teams: Optimize Routine Tasks & Lea...Fwdays
油
Every day, managers and team leads face numerous routine tasks: creating and updating issues in Jira, running meetings, syncing the team, handling retrospectives, and managing documentation. Most of these processes take up valuable time that could be spent on strategic leadership and team development.
In this talk, I will show how AI can optimize team processes, automate routine tasks, and make workflows more efficient. You will learn how AI enhances Scrum processes and helps streamline team management.
I will also share my experience in automating workflows in Jira and Slack: how to reduce manual work with simple automation rules, set up automatic notifications for blockers, generate Confluence pages, track team productivity, and extract valuable insights. What will you gain from this talk??
Multi Agent Systems | PPT | Presentation
Multi Agent Systems | PPT | PresentationCodiste
油
Autonomous agents are sophisticated software entities that exhibit independent decision-making capabilities within Multi-Agent Systems. These agents possess internal state representations, knowledge bases, and reasoning mechanisms that enable them to process information and respond to environmental changes without external intervention. Each agent maintains its own objectives, resources, and decision-making protocols while adhering to system-wide coordination mechanisms. They demonstrate adaptability through learning from interactions and experiences, continuously evolving their behavioral patterns to optimize performance and achieve designated goals.
Read more information: https://bit.ly/4hocJraThink Like and Architect Series: Session 1 of 9 Declarative Design
Think Like and Architect Series: Session 1 of 9 Declarative DesignWalter Spinrad
油
1st of 9 in a series sharing my thoughts on what it takes to be an architect in the Salesforce ecosystem. I will be sharing from experience as a Salesforce CTA in the ecosystem for 17 years. Software-Engineering-and-Best-Practices.
Software-Engineering-and-Best-Practices.oziasrondonc
油
Software engineering is more than just writing codeits about building scalable, maintainable, and efficient applications. This presentation explores the best practices in software engineering, including coding standards, version control, testing strategies, agile methodologies, and DevOps integration. Learn how to enhance code quality, improve team collaboration, and optimize the software development lifecycle for long-term success.Women in Automation: Career Development & Leadership in Automation
Women in Automation: Career Development & Leadership in AutomationUiPathCommunity
油
The month of March is a month when we focus on the women in our community: their expertise and their achievements. But also their potential for guidance and mentorship as we look to find role models and help our entire community reach its maximum potential, in a gender diverse and inclusive environment.
Join us on March 19 for a first hand story on starting an automation career and leadership orientation as a woman expert in the automation field.
Agenda:
Choosing a career in automation as a woman, despite having a strong background in core software development
How a strong background in core development can be leveraged to build a career in automation/digital transformation
Choosing a technical role in automation rather than non-technical positions as a woman
Leading teams as a woman in Turkeys tech industry
How professionals from fields other than computer engineering (both STEM and non-STEM) can transition into automation careers
Mentoring professionals from different fields in their automation careers
We are honored to have with us one of best women in automation advocates and professionals in Turkey:
Kardelen Cihangir, Technical Team Lead @VBM Turkey.
If you have any questions or feedback, please refer to the "Women in Automation 2025" dedicated Forum thread. You can find there extra details and updates.
STIG in Action: Continuous Compliance with MITRE & Anchore
STIG in Action: Continuous Compliance with MITRE & AnchoreAnchore
油
Join us for part two of our STIG webinar series in partnership with MITRE. Well discuss the latest NIST 800-53 and FedRAMP guidance that requires STIG adherence and how this protocol creates new demands on security and operations teams. Our hosts will share insights into how these new demands can be met with security tools that automate STIG compliance. Attendees will learn actionable steps on how to get rid of their traditional spreadsheets and paper binders as Anchore and MITRE hosts explore next generation STIG tooling and guidance.
Hosts Aaron Lippold, Chief Architect at MITRE, and Josh Bressers, VP of Security at Anchore, will demo how to:
- Leverage MITRE Security Automation Framework息 to automate STIG scanning
- View and interpret the results of a STIG scan with MITRE SAF息
- Remediate STIG findings in container images
Automate reporting and replace traditional paper files
SOC as a Service 24/7 Threat Monitoring and Response
SOC as a Service 24/7 Threat Monitoring and ResponseCybercops
油
SOC as a Service provides round-the-clock security monitoring, threat detection, and rapid incident response to protect businesses from cyber threats. With a team of cybersecurity experts and AI-driven analytics, it ensures real-time visibility into security risks, proactive threat hunting, and compliance with industry standards.AEM Branding Rollout: How to Minimize Downtime & Improve Efficiency
AEM Branding Rollout: How to Minimize Downtime & Improve EfficiencyNikhil Gupta
油
AEM Branding Rollout: Traditional vs. Modern Approach Which One Wins?
Branding rollouts in Adobe Experience Manager (AEM) can be complex, especially when multiple websites share the same codebase. Organizations often struggle with minimizing downtime, ensuring scalability, and maintaining content consistency.
This case study explores two approaches to implementing branding changes in AEM:
Traditional Approach Requires a maintenance page, causing downtime & disruption
Modern Approach Uses language-level property activation for zero-downtime rollouts
What Youll Learn:
How to roll out branding updates without downtime
A side-by-side comparison of Traditional vs. Modern Approaches
The scalability & efficiency benefits of the Modern Approach
Lessons learned and best practices for enterprise deployments
叶巨ゐ ( 駒ゐ ): https://medium.com/design-bootcamp/challenging-the-norm-a-smarter-approach-to-high-stakes-releases-f9c792492d2e
Thinking about implementing a similar strategy?
Download the full case study here bit.ly/AEM-Rollout-CaseStudy
Lets Connect!
If youre working on digital transformation, front-end architecture, or large-scale branding rollouts, lets exchange insights! Connect with me on LinkedIn: Nikhil Gupta (PSM-I速 & Lean Six Sigma Black Belt速)
https://www.linkedin.com/in/mrnikhilgupta/
#AEM #AdobeExperienceManager #Branding #DigitalTransformation #Scalability #ZeroDowntime #FrontEndDevelopment