�ݺ�ߣ

Shakir Hussain
Village-Nagaladhansingh ka, Dist.-Alwar
Rajasthan,India, Pin.-321605
Mobile +919728492386, +919812671990
E-mail: shakir_1978@yahoo.co.in
Preventive Maintenance Engineer PME/PMS/RCM/CM
 Dedicated, professional with more than 16+ years experience in oil field. Experience will to take new
challenges and willing to travel and relocate. Results oriented individual with a proven record of
accomplishment & consistent contribution that increase efficiency & control costs through expertise in
 IWCF LEVEL4 Supervisor Level certification
 IWCF-WIP LEVEL4 Supervisor Level certification
 IADC WELLCAPSupervisor Level certification
 Expertise in Commissioning of Rig Building Project in Singapore (Especially Keppel B & Super B
Class) including Mechanical System Testing & commissioning (FAT Test, Endurance Test,
Cantilever, Inclination Test, MODU Load Test, Jacking Trial, Prepared for Delivery) installation, oil
production and operations and manipulation of ancillary equipments.
 Primavera 6 @ Microsoft Project (PM/ERP & Scheduling)
 Preventive maintenance & 3yearly UWILD inspection up to MODU spec & ABS standard.
 5 yearly Rig major refit & new rig construction as per API guidelines API (6A) (16A) (16C)
(RP 53) API 4F API RP64 etc.
 Identify most critical equipments & eliminate failure cause & prevention of reoccur.
 Expertise in hydraulics & pneumatics offshore engineering.
 Excellent knowledge in materials management & handling. Guiding procurement team on ordering and
giving them technical support in vendor development.
 Troubleshooting based on FMEA & RCA assessment analysis tools.
 Competent in AMOS (ERP & AIM) audit & PMS Computer base management.
 Expertise in re-engineering, quality improvement process and change management.
 Organizing and co- coordinating ISO audits for quality management organizations.
 Excellent leadership and team building skills.
 Carrying out appraisals & performance reviews of various teams & providing
 Feedbacks on areas of improvements.
Expertise in complying with safety measures.
Objective
Seeking a position as a Preventive Maintenance Engineer / Project Engineer / RCM Engineer, where I can
maximize my engineering management skills such as preventive maintenance planning and execution,
troubleshooting in drilling, well control equipments and mechanical maintenance of process equipment as well
as my leadership abilities to help in achieving the mission of an organization.
Summary of Qualifications
Over 16+ years in preventive maintenance & troubleshooting of mechanical process equipments, drilling &
well control in both onshore & offshore drilling rigs. Experience with Jack-up rigs, Drill Ships, Land Rigs,
Heavy Duty Marine Equipments and process equipments. Delivers a sound knowledge in Change
Management by studying the technical requirement in process change and carrying project activity to achieve
change management.

Jindal Drilling Services Professional Experience
Commissioning Engineer / Chief Rig Mechanical & PME
Jack-Up Rigs (B class), Build in Singapore
Virtue-1, Discovery-1 & Star Explorer (Dec, 2008 to Till date)
Involved in Kepple Rig Building Yard (Virtue1 & Star Explorer1) in Singapore fabrication and commissioning
(FAT Test, Endurance Test, Cantilever, Inclination Test, MODU Load Test, Jacking Trial, Prepared for
Delivery) of the above mentioned Rigs right from installation test verification of various on-board electro-
mechanical equipments.
Carrying out PMS, PDMS, CM scheduling maintenance & inspection with third parties as per API guidelines
API (6A) (16A) (16C) (RP 53) API 4F API RP64 etc.
Liaising with dockyard and third party contractors for negotiations and getting it approved for a class
requirement through ABS, DNV. Organize and directing ISO 9001-2008 audits for quality assurance.
Troubleshoot, Maintenance & Part Ordering of below mention Equipments
 Weather ford, Farr Tongs handling Tools & NOV equipment such as Iron roughneck ST80-120,
 VCR, SS40 & PHS (rocker system & pipe handling system)
 BOP (13-5/8” & 21-1/4”)
 Diverter Hydrill 29-1/2”/Koomey System
 Cameron Kill & Chock Manifolds, HP/LP Test pump
 NOV 1850 Centrifuges complete maintenance/Shale Shaker /Mud system
 IR pneumatic utility winch, BOP winches/
 Favelle Favco Crane, Leg fixations System, Skidding System (cantilever/Drill floor)
 ADS10 Draw Works, Mud Pump 14P-220
 Intensifier, PS21 Power Slip, Pneumatic Spider Elevators/Slip
 Water Maker, Fuel Purifier, sanitary System (Alfa Laval),
 CAT 3516 5Nos. Engines
 Rotary Compressor, Air Drier
 BJ cement Unit Both End (Power & fluid)
 Pipelines & different type Valves
 TDS 8SA, Casing Running Tools
 POWER SLIP-500,
 BX Elevator Varco,
 Power units with hydraulic system, Casing Tongs Up to 36”inch casing,
 Tubing Tongs, all pneumatic and hydraulic handling tools and so on
Schlumberger IPM Rig Management
Chief Mechanic -Type of Rig – Land Rigs (OMAN & ARABIA) (2006 To 2008)
Acted as a mechanical engineer on the fabrication of HH & BOMCO, China land rigs driven by VFD with
hydraulic disc brake, Auto Driller, Hydraulic Wire line Unit, Hydraulic winches, HPU system, Joy stick,
Touchscreen, Top Drive 11SA, CCTV monitoring system, Flayer Ignition system & CAT. # 3512 B-MEUI
System etc.

Transocean Inc.
Assistant Mechanic (INDIA, MALAYSIA & SOUTH AFRICA) (2002 To 2006)
Type of Rigs – Drill ships (Discoverer 534 or Discoverer seven seas)
Worked as an Asst. Mechanic On drill ships on various projects & equipments, such as Dynamic Position
Thrusters, Iron Roughneck (VARCO), and ENGINE – EMD Engines, CAT. D399, D398, C-18. Sub Sea
BOPS (CAMRON), Hydraulic Rocker System, 2 Hydraulic &2 Mechanical Cranes, Centrifugal, Weldon,
plunger Reciprocating Pneumatic Pumps,
4H & 4S TOP DRIVE, Rest common equipments (D/Works, R/Table, KOOMY Unit BOP & Utility
Winches & safety equipments,etc.
Cargo ship /TC Amagin offshore
Marine Engineer (KUWAIT & MALAYSIA) (1999 To 2002)
Responsible for maintenance of main engine, 2 Gen-sets (PLISTIC 2.5 8848BHP & YANMAR)
Purifiers (diesel oil & heavy oil)
To keep a track on sailing time and assist the chief engineer on major maintenance etc.
Naval Dockyard, Mumbai, India
Mechanical Apprentice (1995 TO 1998)
Type of ships Indian Navy War & coast guard ships.
Worked as an apprentice in mechanical maintenance, worked on different kind of Ships, Submarines, Tugs,
and Boats etc.
Education & Technical Training
 Diploma in Mechanical Engineering
 Yukon Hydraulic training in Bangalore
 IIME Mumbai (Advance Mechanical Design course)
 Apprentice in Marine Engineering
Technical Training
 IWCF LEVEL4 Supervisor Level certification
 IWCF-WIP LEVEL4 Supervisor Level certification
 IADC WELLCAPSupervisor Level certification
 Modular course on operation & Maintenance of Top Drive
 (VARCO 8SA, 11S). Training with VARCO.
 Tubular Running Services INDUCTION & ADVACE Training in WEATHERFORD OIL TOOLS.
 Mechanical Hydraulics & Pneumatics system Modular (Mechanic & Motormen)
Technical Course in TRANSOCEAN Inc.
 Hydraulic Training course in Bangalore in India
 Caterpillar 3512 Training
 PMP/PMBOK Project Management.
 RCM (Reliable Centered Maintenance) Workshop
 CBM & TPM (Condition Based Maintenance) seminars
 Primavera 6 @ Microsoft Projects (PM/ERP & Scheduling) Training in Delhi

�ݺ�ߣ

SHAKIR RESUME-2

Recommended

More Related Content

What's hot (14)

Similar to SHAKIR RESUME-2 (20)

SHAKIR RESUME-2