際際滷

際際滷Share a Scribd company logo

SSD-Bondi.pptx

Download as PPTX, PDF
S
ssuserfc2c45

This document compares the specifications and performance of various hard drives and solid state drives. It finds that while SSDs provide much faster seek times, higher RPMs, and greater IOPS than HDDs, they also have higher prices per gigabyte and more complex memory management due to the limitations of flash memory. The optimal SSD performance depends most on the controller technology used rather than the flash memory itself.

1 of 40
Download to read offline
SSD-Bondi.pptx
Storage Capacity: 3.75 MB Physical Size: 87.9 ft3 Price for storage: 15,000$/MB Seek Time: 600 ms Rotational Speed: 1200 RPM
Storage Capacity: 80GB 3 TB Physical Size: .002 ft3 Price for storage: 10蔵/ GB Seek Time: 9ms Rotational Speed: 7200-10000 RPM
SSD-Bondi.pptx
WD VelociRaptor: Storage Capacity: 600GB Price: 289.99$ Price for storage: 48蔵/ GB Seek Time: 7ms Rotational Speed: 10000 RPM Sequential Read/Write: 157 MB/s Random Read: 1 MB/s Random Write: 1 MB/s IOPS: 905
Storage Capacity: 60GB-240GB Price: $209.99(120 GB) Price for storage: 1.74$/GB Sequential Read: 265.5 MB/s Sequential Write: 251.9 MB/s Random Read: 62 MB/s Random Write: 164.9 MB/s IOps: 50,000
Why is there so much hype about SSDs? Speed? Reliability? Ability to tell future? Making Vista usable? +5 armor immunity to random access latency?
First SSD not in 2007, more like 1976 Only had capacity of 2 MB Fast-forward to 2007: NAND Flash (Invented in 1980) Non-Volatile Storage System Used in USB Flash Drives, MP3 Players & SSDs Multiple types: Single Level Cell(SLC) & Multi Level Cell(MLC) Guess and Check reading and writing
SLC Flash MLC Flash Apply Voltage Wait for Reaction Return Result or Apply More Voltage, Repeat
Difference? Since there are only 2 possible values of SLC it only takes 1 voltage to return a 0 or 1 MLC requires a maximum of 3 different voltages to assure that the value will be found. Random Read Speeds: SLC: 25 袖s MLC: 50 袖s Random Write Speeds: SLC: 250 袖s MLC: 900 袖s
SSD-Bondi.pptx
Weve all used SSDs before, the same technology is used in USB Flash Drives and they only function around 5-40MB/s. What if we use 10 USB Flash Drives in raid as a HDD? Anywhere between 40GB 320GB Possible access speed of 50-400MB/s
Each SSD board contains any number of NAND ICs, chip used to store data, all depending on how expensive the board is. Each SDD board also contains any number of support channels, normally one per NAND IC, which allows the controller to communicate to each NAND IC.
SSD-Bondi.pptx
The sheer speed of a SSD comes from the fact that it can access each of its NAND IC at exactly the same time. While Platter HDDs like to have reads/writes to be in the same location for future access SSDs would rather have the data spread evenly across all of its NAND ICs for maximum accessibility.
You have it all in an SSD: Almost instantaneous read and write times The ability to read or write in multiple locations at once The speed of the drive scales extremely well with the number of NAND ICs on board But
To erase the value in flash memory the original voltage must be reset to neutral before a new voltage can be applied, known as write amplification. Random Erase Speed: SLC 2ms per block MLC 2ms per block What is this block stuff?
1 or 2 bits does us no good Pages!!! 1 Page = 4KB coincidence? Block = 128 Pages = 512 KB Plane = 1024 Blocks = 512 MB Depending on the board the combining keeps going up until you get a single chip, NAND IC, on the board
Wait a sec, we can write and read a single page of data from a SSD but we have to delete an entire block to release it? I guess its ok since we are able to write to individual pages on the SSD, oh theres one more thing the page has to be empty before we can write to itcrap. To make matters worse, a standard MLC can only be erased 10,000 times before it goes bad. Solution: Lets not actually delete files when they are deleted on the OS, much like a platter drive.
Rather then deleting the block and writing the modified block with the new page back in the original location just write the modified block to another location in memory. Believe it or not drives were actually shipped with this solution, never thinking about what happened when the drive filled up. After the drive filled up the amount of time to write a block of data went from 250 袖s to 250 袖s + 2ms since it also had to delete a block. This actually made the SSDs slower then a regular platter drive when writing.
Hypothetical SSD: Page Size: 4KB Block Size: 5 Pages Drive Size: 1 Block Read Speed: 2 KB/s Write Speed: 1 KB/s
Lets write a 4kb text file to the brand new SSD.
Now lets write an 8kb pic file to the almost brand new SSD, thankfully there's space.
Now lets delete the txt file in the first page.
Finally lets write a 12kb pic to the SSD. How long should it take? 1 kb/s write speed
Whats wrong here? The OS is told there are 3 open pages on the SSD when there are only 2 available. Time for the SSD to do some fancy footwork to open up the space. Banking on the quality of the SSD hopefully it has an onboard cache otherwise it has to use ram, taking much longer and consuming CPU cycles.
Step 1: Read block into cache Step 2: Delete page from cache Step 3: Write new pic into cache Step 4: Delete the old block on SSD Step 5: Write cache to SSD
The OS only thought it was writing 12 KBs of data when in fact the SSD had to read 12 KBs and then write 20KBs, the entire block. Since the SSD is quite slow the operation should have taken 12 secs but actually took 26 seconds, resulting in a write speed of .46KB/s not 1KB/s Thats one hefty cut to the performance of the drive, how could we fix the problem and save SSDs from an early grave?
Why not just delete the file when it is deleted from the OS, or a relatively short time afterwards, and clear the page in the block out? Actually this fixes the problem of running out of space, but what happens when we try to overwrite a file, ie saving an updated word document? Unfortunately there is no way around having to read the block containing the original file into cache and deleting it, however there is a choice to do it before or after the write. Which is better?
So what happens when I want to do a fresh install of my OS on the HDD? Should I just follow the standard reformat option and install like normal?
Believe it or not there is actually a command for trimming the entire drive so it appears brand new, except for the fact that the life span of each NAND cell has been decreased by one. Intel and many of the SSD manufactures supports a command called HDD ERASE that permanently deletes the data on the drive.
Data Recovery? On a standard HDD data recovery of deleted files is quite easy because the actual bits are still on the HDD since the HDD doesnt actually delete them. What happens with TRIM? Severely reduces the possibility of locating deleted files on the drive, making computer forensics impossible.
Surprisingly there isn't much difference between the NAND Flash memory used in each SSD since it is all made by 4 different providers, each using the same design. The true difference in the drive is the controller that is being used, its actually the controller that decides which algorithms to use and how to manage memory.
Intel: From the get go in 2007 intel has had the strongest grip on the market of SSDs, they produce their own controller and the NAND Flash Memory. Garbage: There were quite a few companies that started up and died quickly trying to create controllers that beat Intel and they all failed except Sand Force: Arguable the best controller on the market right now any company that has a SSD that performs well is using a Sand Force controller, except for Intel who is trying to catch up.
http://www.newegg.com/Product/Productcompare.aspx?Submit=ENE&N=100006519%2050001550%2040000636&IsNod eId=1&srchInDesc=2&page=1&bop=And&ActiveSearchResult=True&CompareItemList=636|20-227-550^20-227-550- TS%2C20-227-542^20-227-542-TS Both drives are actually identical when it comes to the die, but have different versions of the Sand Force controller on them. The only real difference between the drives is that the Vertex has the ability to support 50,000 IOPS while the Agility can only support 20,000 IOPS.
Sand Force has released information about a new controller they have been developing claiming to literally double the output of the current controller and SSD on the market. Doubling come on, Ive always believed if something is to good to be true it probably is. Well its true.
Storage Capacity: 120GB-360GB Price: $499.99(240 GB) Price for storage: 2.08$/GB Sequential Read: 413.5 MB/s Sequential Write: 371.4 MB/s Random Read: 68.8 MB/s Random Write: 332.5 MB/s IOps: 60,000
Lets say the SSD Saves 10 Mins per day of your computing time For 7 Days a week Thats 60 Hours a year Minimum wage = 7.25$/hr Total Savings: 440$ a year Its strange to think about it that way but heres proof as to how it can work that way.
Guess what I have today? OCZ Revodrive in a computer that actually has the power to use the drive.
Pros: SSDs are extremely fast SSDs are easy to use SSDs are the future of media storage Cons: SSDs are expensive SSDs are constantly upgrading SSDs are complicated to understand

More Related Content

SSD-Bondi.pptx

  • 2. Storage Capacity: 3.75 MB Physical Size: 87.9 ft3 Price for storage: 15,000$/MB Seek Time: 600 ms Rotational Speed: 1200 RPM
  • 3. Storage Capacity: 80GB 3 TB Physical Size: .002 ft3 Price for storage: 10蔵/ GB Seek Time: 9ms Rotational Speed: 7200-10000 RPM
  • 5. WD VelociRaptor: Storage Capacity: 600GB Price: 289.99$ Price for storage: 48蔵/ GB Seek Time: 7ms Rotational Speed: 10000 RPM Sequential Read/Write: 157 MB/s Random Read: 1 MB/s Random Write: 1 MB/s IOPS: 905
  • 6. Storage Capacity: 60GB-240GB Price: $209.99(120 GB) Price for storage: 1.74$/GB Sequential Read: 265.5 MB/s Sequential Write: 251.9 MB/s Random Read: 62 MB/s Random Write: 164.9 MB/s IOps: 50,000
  • 7. Why is there so much hype about SSDs? Speed? Reliability? Ability to tell future? Making Vista usable? +5 armor immunity to random access latency?
  • 8. First SSD not in 2007, more like 1976 Only had capacity of 2 MB Fast-forward to 2007: NAND Flash (Invented in 1980) Non-Volatile Storage System Used in USB Flash Drives, MP3 Players & SSDs Multiple types: Single Level Cell(SLC) & Multi Level Cell(MLC) Guess and Check reading and writing
  • 9. SLC Flash MLC Flash Apply Voltage Wait for Reaction Return Result or Apply More Voltage, Repeat
  • 10. Difference? Since there are only 2 possible values of SLC it only takes 1 voltage to return a 0 or 1 MLC requires a maximum of 3 different voltages to assure that the value will be found. Random Read Speeds: SLC: 25 袖s MLC: 50 袖s Random Write Speeds: SLC: 250 袖s MLC: 900 袖s
  • 12. Weve all used SSDs before, the same technology is used in USB Flash Drives and they only function around 5-40MB/s. What if we use 10 USB Flash Drives in raid as a HDD? Anywhere between 40GB 320GB Possible access speed of 50-400MB/s
  • 13. Each SSD board contains any number of NAND ICs, chip used to store data, all depending on how expensive the board is. Each SDD board also contains any number of support channels, normally one per NAND IC, which allows the controller to communicate to each NAND IC.
  • 15. The sheer speed of a SSD comes from the fact that it can access each of its NAND IC at exactly the same time. While Platter HDDs like to have reads/writes to be in the same location for future access SSDs would rather have the data spread evenly across all of its NAND ICs for maximum accessibility.
  • 16. You have it all in an SSD: Almost instantaneous read and write times The ability to read or write in multiple locations at once The speed of the drive scales extremely well with the number of NAND ICs on board But
  • 17. To erase the value in flash memory the original voltage must be reset to neutral before a new voltage can be applied, known as write amplification. Random Erase Speed: SLC 2ms per block MLC 2ms per block What is this block stuff?
  • 18. 1 or 2 bits does us no good Pages!!! 1 Page = 4KB coincidence? Block = 128 Pages = 512 KB Plane = 1024 Blocks = 512 MB Depending on the board the combining keeps going up until you get a single chip, NAND IC, on the board
  • 19. Wait a sec, we can write and read a single page of data from a SSD but we have to delete an entire block to release it? I guess its ok since we are able to write to individual pages on the SSD, oh theres one more thing the page has to be empty before we can write to itcrap. To make matters worse, a standard MLC can only be erased 10,000 times before it goes bad. Solution: Lets not actually delete files when they are deleted on the OS, much like a platter drive.
  • 20. Rather then deleting the block and writing the modified block with the new page back in the original location just write the modified block to another location in memory. Believe it or not drives were actually shipped with this solution, never thinking about what happened when the drive filled up. After the drive filled up the amount of time to write a block of data went from 250 袖s to 250 袖s + 2ms since it also had to delete a block. This actually made the SSDs slower then a regular platter drive when writing.
  • 21. Hypothetical SSD: Page Size: 4KB Block Size: 5 Pages Drive Size: 1 Block Read Speed: 2 KB/s Write Speed: 1 KB/s
  • 22. Lets write a 4kb text file to the brand new SSD.
  • 23. Now lets write an 8kb pic file to the almost brand new SSD, thankfully there's space.
  • 24. Now lets delete the txt file in the first page.
  • 25. Finally lets write a 12kb pic to the SSD. How long should it take? 1 kb/s write speed
  • 26. Whats wrong here? The OS is told there are 3 open pages on the SSD when there are only 2 available. Time for the SSD to do some fancy footwork to open up the space. Banking on the quality of the SSD hopefully it has an onboard cache otherwise it has to use ram, taking much longer and consuming CPU cycles.
  • 27. Step 1: Read block into cache Step 2: Delete page from cache Step 3: Write new pic into cache Step 4: Delete the old block on SSD Step 5: Write cache to SSD
  • 28. The OS only thought it was writing 12 KBs of data when in fact the SSD had to read 12 KBs and then write 20KBs, the entire block. Since the SSD is quite slow the operation should have taken 12 secs but actually took 26 seconds, resulting in a write speed of .46KB/s not 1KB/s Thats one hefty cut to the performance of the drive, how could we fix the problem and save SSDs from an early grave?
  • 29. Why not just delete the file when it is deleted from the OS, or a relatively short time afterwards, and clear the page in the block out? Actually this fixes the problem of running out of space, but what happens when we try to overwrite a file, ie saving an updated word document? Unfortunately there is no way around having to read the block containing the original file into cache and deleting it, however there is a choice to do it before or after the write. Which is better?
  • 30. So what happens when I want to do a fresh install of my OS on the HDD? Should I just follow the standard reformat option and install like normal?
  • 31. Believe it or not there is actually a command for trimming the entire drive so it appears brand new, except for the fact that the life span of each NAND cell has been decreased by one. Intel and many of the SSD manufactures supports a command called HDD ERASE that permanently deletes the data on the drive.
  • 32. Data Recovery? On a standard HDD data recovery of deleted files is quite easy because the actual bits are still on the HDD since the HDD doesnt actually delete them. What happens with TRIM? Severely reduces the possibility of locating deleted files on the drive, making computer forensics impossible.
  • 33. Surprisingly there isn't much difference between the NAND Flash memory used in each SSD since it is all made by 4 different providers, each using the same design. The true difference in the drive is the controller that is being used, its actually the controller that decides which algorithms to use and how to manage memory.
  • 34. Intel: From the get go in 2007 intel has had the strongest grip on the market of SSDs, they produce their own controller and the NAND Flash Memory. Garbage: There were quite a few companies that started up and died quickly trying to create controllers that beat Intel and they all failed except Sand Force: Arguable the best controller on the market right now any company that has a SSD that performs well is using a Sand Force controller, except for Intel who is trying to catch up.
  • 35. http://www.newegg.com/Product/Productcompare.aspx?Submit=ENE&N=100006519%2050001550%2040000636&IsNod eId=1&srchInDesc=2&page=1&bop=And&ActiveSearchResult=True&CompareItemList=636|20-227-550^20-227-550- TS%2C20-227-542^20-227-542-TS Both drives are actually identical when it comes to the die, but have different versions of the Sand Force controller on them. The only real difference between the drives is that the Vertex has the ability to support 50,000 IOPS while the Agility can only support 20,000 IOPS.
  • 36. Sand Force has released information about a new controller they have been developing claiming to literally double the output of the current controller and SSD on the market. Doubling come on, Ive always believed if something is to good to be true it probably is. Well its true.
  • 37. Storage Capacity: 120GB-360GB Price: $499.99(240 GB) Price for storage: 2.08$/GB Sequential Read: 413.5 MB/s Sequential Write: 371.4 MB/s Random Read: 68.8 MB/s Random Write: 332.5 MB/s IOps: 60,000
  • 38. Lets say the SSD Saves 10 Mins per day of your computing time For 7 Days a week Thats 60 Hours a year Minimum wage = 7.25$/hr Total Savings: 440$ a year Its strange to think about it that way but heres proof as to how it can work that way.
  • 39. Guess what I have today? OCZ Revodrive in a computer that actually has the power to use the drive.
  • 40. Pros: SSDs are extremely fast SSDs are easy to use SSDs are the future of media storage Cons: SSDs are expensive SSDs are constantly upgrading SSDs are complicated to understand