際際滷

際際滷Share a Scribd company logo

Steps to apollo11

Download as PPT, PDF
Tamanna Jaisinghani
Tamanna Jaisinghani

This document provides instructions for making a model of a Saturn V rocket out of paper. It describes cutting out and assembling various paper figures across 5 parts. In part 1, figures 1, 1.1, 1.2, 2, 3, and 4 are cut out and assembled to form the first stage of the rocket. In part 2, figures 5, 5.1, and 5.2 are similarly assembled to form the second stage. Part 3 describes assembling the third stage from figures 9, 9.1, 9.2, and 9.3. In part 4, figures 8, 10, 11, and 11.1 are used to form an instrumentation unit. Finally, part 5 brings all the stages

1 of 39
Download to read offline
How to Make Your Saturn V
Part 1
Figure 1.1Figure 1.2 Figure 1 Cut out the Figures 1, 1.1 and 1.2 from Page 1. Glue half of the Figures 1.1 (horizontal) and 1.2 (vertical) under the edges of Figure 1 along the dotted lines as shown above.
Figure 2 Figure 3 Figure 4 Cut out the Figures 2, 3 and 4 from Page 2.
Fold A, B, C and D part of the Figure 3 along the line in the middle as shown above.
Cut the all the parts of figure 2 in the center along the red line shown in the image above. Be careful while using sharp objects. Ask your parents for help.
Now insert the folded Figure 3 in the gap you just cut in the Figure 2.
Spread out the edges of the Figure 3 as in the image so it wont fall out.
Then fold the corners of the Figure 2 as shown.
Now use a cutter to cut the Figure 1 as shown above Be careful while using sharp objects. Ask your parents for help.
Now use all the Figures of 2+3 and insert their folded parts in the cut on Figure 1 and stick it with gum. Repeat the same thing with the other Figures of 2+3 as well.
This is how it would look like once you are done with the above step.
Take this new Figure 1 and roll it in a cylindrical shape use the other part of Figure 1.2 to join it. Final Figure 1
Part 2
Figure 5.2 Figure 5.1 Figure 5 Cut out the Figures 5, 5.1 and 5.2 from the Page 3
Stick Figure 5.2 on the edge of Figure 5 horizontally. Figure 5.2 Figure 5
Stick Figure 5.1 on the edge of figure 5 vertically. Figure 5.1 Figure 5
Now roll it up in a cylindrical shape and join it like you did with Figure 1. Final Figure 5
Part 3
Figure 9.3 Figure 9 Figure 9.2 Figure 9.1 Cut out the Figures 9, 9.1, 9.2 and 9.3 from the Page 4
Stick Figure 9.3 on the edge of Figure 9 horizontally. Figure 9.3 Figure 9
Now roll it up in a cylindrical shape and join it like you did with Figure 1. Final Figure 9
Figure 6 Figure 7 Cut out the Figures 6 and 7 from the Page 3.
Fold the Figure 7 as shown above and use the Figure 6 as its base. Final Figure 7
Take the final Figure 9 and insert it inside the final Figure 7 so it looks like the above image. Final Figure 9 Final Figure 7
Part 4
Figure 10 Figure 8 Figure 11 Figure 11.1 Cut out the Figures 8, 10 11 and 11.1 from Page 4
Stick the Figure 11.1 to the Figure 11 as shown above. Figure 11 Figure 11.1
Now roll up the Figure 11 as shown above and stick the Figures 8 and 10 on the top and bottom of it. Final Figure 11
Part 5
Figure 13.1 Figure 13 Figure 13.3 Figure 13.0 Cut out the Figures 13, 13.0, 13.1 and 13.3 from the Page 5
Join the Figures 13.0, 13.1 and 13.3 to the Figure 13 as shown above. Figure 13.1 Figure 13 Figure 13.3 Figure 13.0
Cut out the Figures 12,14, 15, 15.1,16, 17 and 18 from Page 5. Figure 12 Figure 14 Figure 16 Figure 18 Figure 17 Figure 15 Figure 15.1
Roll up the Figures 17 and 16 to make them like the ones on the right hand side. Figure 17 Figure 16
Figure 15 Figure 15.1 Use the Figure 15.1 to roll up the Figure 15 to make it look like the image on the right side.
Modified Figure 13 Figure 14 & 12 Use the new Figure 13 you have, roll it up and stick Figure 14 and 12 on the top and bottom of it.
Steps to apollo11
Now join all the parts on top of each other and
Your Very Own Saturn V

More Related Content

Steps to apollo11

  • 1. How to Make Your Saturn V
  • 3. Figure 1.1Figure 1.2 Figure 1 Cut out the Figures 1, 1.1 and 1.2 from Page 1. Glue half of the Figures 1.1 (horizontal) and 1.2 (vertical) under the edges of Figure 1 along the dotted lines as shown above.
  • 4. Figure 2 Figure 3 Figure 4 Cut out the Figures 2, 3 and 4 from Page 2.
  • 5. Fold A, B, C and D part of the Figure 3 along the line in the middle as shown above.
  • 6. Cut the all the parts of figure 2 in the center along the red line shown in the image above. Be careful while using sharp objects. Ask your parents for help.
  • 7. Now insert the folded Figure 3 in the gap you just cut in the Figure 2.
  • 8. Spread out the edges of the Figure 3 as in the image so it wont fall out.
  • 9. Then fold the corners of the Figure 2 as shown.
  • 10. Now use a cutter to cut the Figure 1 as shown above Be careful while using sharp objects. Ask your parents for help.
  • 11. Now use all the Figures of 2+3 and insert their folded parts in the cut on Figure 1 and stick it with gum. Repeat the same thing with the other Figures of 2+3 as well.
  • 12. This is how it would look like once you are done with the above step.
  • 13. Take this new Figure 1 and roll it in a cylindrical shape use the other part of Figure 1.2 to join it. Final Figure 1
  • 15. Figure 5.2 Figure 5.1 Figure 5 Cut out the Figures 5, 5.1 and 5.2 from the Page 3
  • 16. Stick Figure 5.2 on the edge of Figure 5 horizontally. Figure 5.2 Figure 5
  • 17. Stick Figure 5.1 on the edge of figure 5 vertically. Figure 5.1 Figure 5
  • 18. Now roll it up in a cylindrical shape and join it like you did with Figure 1. Final Figure 5
  • 20. Figure 9.3 Figure 9 Figure 9.2 Figure 9.1 Cut out the Figures 9, 9.1, 9.2 and 9.3 from the Page 4
  • 21. Stick Figure 9.3 on the edge of Figure 9 horizontally. Figure 9.3 Figure 9
  • 22. Now roll it up in a cylindrical shape and join it like you did with Figure 1. Final Figure 9
  • 23. Figure 6 Figure 7 Cut out the Figures 6 and 7 from the Page 3.
  • 24. Fold the Figure 7 as shown above and use the Figure 6 as its base. Final Figure 7
  • 25. Take the final Figure 9 and insert it inside the final Figure 7 so it looks like the above image. Final Figure 9 Final Figure 7
  • 27. Figure 10 Figure 8 Figure 11 Figure 11.1 Cut out the Figures 8, 10 11 and 11.1 from Page 4
  • 28. Stick the Figure 11.1 to the Figure 11 as shown above. Figure 11 Figure 11.1
  • 29. Now roll up the Figure 11 as shown above and stick the Figures 8 and 10 on the top and bottom of it. Final Figure 11
  • 31. Figure 13.1 Figure 13 Figure 13.3 Figure 13.0 Cut out the Figures 13, 13.0, 13.1 and 13.3 from the Page 5
  • 32. Join the Figures 13.0, 13.1 and 13.3 to the Figure 13 as shown above. Figure 13.1 Figure 13 Figure 13.3 Figure 13.0
  • 33. Cut out the Figures 12,14, 15, 15.1,16, 17 and 18 from Page 5. Figure 12 Figure 14 Figure 16 Figure 18 Figure 17 Figure 15 Figure 15.1
  • 34. Roll up the Figures 17 and 16 to make them like the ones on the right hand side. Figure 17 Figure 16
  • 35. Figure 15 Figure 15.1 Use the Figure 15.1 to roll up the Figure 15 to make it look like the image on the right side.
  • 36. Modified Figure 13 Figure 14 & 12 Use the new Figure 13 you have, roll it up and stick Figure 14 and 12 on the top and bottom of it.
  • 38. Now join all the parts on top of each other and
  • 39. Your Very Own Saturn V

Editor's Notes

  • #4: First cut out the figures 1, 1.1 and 1.2 from the pdf