際際滷

際際滷Share a Scribd company logo

Surface Temperature Sensors and Transmitters for Industrial Applications

Alliance Technical Sales, Inc.
Alliance Technical Sales, Inc.

Surface temperatures can be a difficult measurement. Special engineering and extensive testing of the Smart Sensor surface pad provides fast response and accurate surface measurement. Model 1500 shown above has been used extensively as the primary control element for freeze protection control loops. A retractable design that allows removal of the sensor while leaving the surface pad in place is also available. Smart sensor designs have be used to measure the skin temperature of vessels, pipes, boiler tubes, superheater tubes or where ever the process requires surface temperature measurement.

1 of 1
Download to read offline
息 2014 Smart Sensors an SOR Company 1920 Aldine Western Houston, TX 77038 Phone: 281-272-5333 Fax: 281-272-5332 Specialty Sensors - Surface Electric Trace Sensor - Type 1500 and 1500R TYPE 1500 - Used to accurately measure the surface temperature of any pipe or tank greater than 3 inches in diameter. The standard X and Y dimensions reduces the heat sinc effect and greatly improves the accuracy. The 1500 is widely used for electric heat tracing control for freeze protection and process control, especially where changes in temperature can cause process material to stratify. Head Type Type Calibration X Junction Y Options 1500 or 1500R (see drawings for standard X and Y dimensions or indicate To order: Indicate the code letter or value for each requirement. Head Type 0 No Head CA Cast Aluminum CI Cast Iron CSS Cast Stainless Steel LCA Large Cast Aluminum PP Polypropylene (Black) PPS Polypropylene Sanitary FTA Flip Top Aluminum FTP Flip Top Poly (white) EPA Explosion Proof Aluminum EPS Explosion Proof Stainless Steel EHA Explosion Proof Aluminum EHI Explosion Proof Iron Calibration J Iron Constantan速 K Chromel速 Alumel速 T Copper Constantan速 E Chromel速 Constantan速 N Nicrosil速 Nisil速 PO Low Temp RTD to 500属 F PH High Temp RTD to 900属 F PM Heavy Duty RTD to 900属 F Standard RTD is a three-wire 100 ohm Platinum / .00385 Alpha. For higher temperature ranges - consult factory. For special limits on thermocouples, repeat calibration code, i.e. JJ. Sensor Junction G Grounded U Ungrounded DG Dual Grounded DU Dual Ungrounded S Single RTD D Dual RTD FW Four Wire RTD OPTIONS S 3/4 - 2 (specify radius) M Radius for NPT pipe sizes 3 - 6 L Radius for NPT pipe sizes 6 and above Type 1500 Type 1500R Pad 2 2 Pad TYPE 1500R - This surface temperature design allows easy removal of the sensor. In applications where there is heavy insulation on the pipe the sensor can be removed without disturbing or removing the insulation, reducing replacement downtime and costs. Type 1500 Type 1500R is available with EHA and EHI heads only X (4 Std.) X (4 Std.) Type RTD Type L Junction (see drawings for standard X and Y dimensions or indicate desired dimension in inches) To order replacement sensor for Type 1500R: Indicate the code/value for each requirement. 1500RS B-1 Type 1500 Type 1500R Type 1500R Type 1500 11.50 (L= x + y - 1/2) 1/4 OD 3/8 OD 3 Radius Y (3 standard) Y (8 standard) Sensor Sensor Type 1500R 8.25 2.001.25 desired dimension in inches) EPAA Explosion Proof Aluminum Atex 11.5 Alliance Technical Sales | Clarendon Hills, IL | 630-321-9646 | www.alliancets.com

More Related Content

Surface Temperature Sensors and Transmitters for Industrial Applications

  • 1. 息 2014 Smart Sensors an SOR Company 1920 Aldine Western Houston, TX 77038 Phone: 281-272-5333 Fax: 281-272-5332 Specialty Sensors - Surface Electric Trace Sensor - Type 1500 and 1500R TYPE 1500 - Used to accurately measure the surface temperature of any pipe or tank greater than 3 inches in diameter. The standard X and Y dimensions reduces the heat sinc effect and greatly improves the accuracy. The 1500 is widely used for electric heat tracing control for freeze protection and process control, especially where changes in temperature can cause process material to stratify. Head Type Type Calibration X Junction Y Options 1500 or 1500R (see drawings for standard X and Y dimensions or indicate To order: Indicate the code letter or value for each requirement. Head Type 0 No Head CA Cast Aluminum CI Cast Iron CSS Cast Stainless Steel LCA Large Cast Aluminum PP Polypropylene (Black) PPS Polypropylene Sanitary FTA Flip Top Aluminum FTP Flip Top Poly (white) EPA Explosion Proof Aluminum EPS Explosion Proof Stainless Steel EHA Explosion Proof Aluminum EHI Explosion Proof Iron Calibration J Iron Constantan速 K Chromel速 Alumel速 T Copper Constantan速 E Chromel速 Constantan速 N Nicrosil速 Nisil速 PO Low Temp RTD to 500属 F PH High Temp RTD to 900属 F PM Heavy Duty RTD to 900属 F Standard RTD is a three-wire 100 ohm Platinum / .00385 Alpha. For higher temperature ranges - consult factory. For special limits on thermocouples, repeat calibration code, i.e. JJ. Sensor Junction G Grounded U Ungrounded DG Dual Grounded DU Dual Ungrounded S Single RTD D Dual RTD FW Four Wire RTD OPTIONS S 3/4 - 2 (specify radius) M Radius for NPT pipe sizes 3 - 6 L Radius for NPT pipe sizes 6 and above Type 1500 Type 1500R Pad 2 2 Pad TYPE 1500R - This surface temperature design allows easy removal of the sensor. In applications where there is heavy insulation on the pipe the sensor can be removed without disturbing or removing the insulation, reducing replacement downtime and costs. Type 1500 Type 1500R is available with EHA and EHI heads only X (4 Std.) X (4 Std.) Type RTD Type L Junction (see drawings for standard X and Y dimensions or indicate desired dimension in inches) To order replacement sensor for Type 1500R: Indicate the code/value for each requirement. 1500RS B-1 Type 1500 Type 1500R Type 1500R Type 1500 11.50 (L= x + y - 1/2) 1/4 OD 3/8 OD 3 Radius Y (3 standard) Y (8 standard) Sensor Sensor Type 1500R 8.25 2.001.25 desired dimension in inches) EPAA Explosion Proof Aluminum Atex 11.5 Alliance Technical Sales | Clarendon Hills, IL | 630-321-9646 | www.alliancets.com