![December 2012 – November 2013
EFC GROUP
Role: Project Engineer
I took overall responsibility of the project, leading it from the sales handover all the way to close out meeting and
afterwards providing aftercare support to clients.
Besides being the interface between the client and EFC I worked closely with all the different departments (sales, design
office and workshop) to achieve good quality work.
I gave guidance for the more junior project engineers assigned with projects similar to those I had completed previously.
Sales department relied on the bills of materials from the projects I had carried out, knowing they were up to date and
therefore a good basis for quoting for repeat orders.
I was also the first aider.
Key projects delivered:
- A tank gauging system c/w hull draft measurement and 2-axis inclination metering.
- An air pressure vessel surface temperature monitoring system for an active heave compensator system
August 2012 - December 2012
LABTECH SERVICES LIMITED
Role: Project Engineer
I interfaced with the sales office to design A60 rated offshore
containers to meet client’s requirements
Ensured compliance to all applicable design standards [DNV 2.7-1 BS EN 12079 (structural) and DNV 2.7-2 and/or NORSOK]
As a project engineer I was responsible of on time and on budget delivery and ultimately client satisfaction. I was the first
point of contact for the client and an interface between all different disciplines and third party companies.
I was the first aider.
August 2010 - August 2012
OEG Offshore
Role: Project engineer, initially an electrical support engineer
In keeping within budget costs and man hours my main responsibilities were to take care of procurement and specification
of equipment installed into a module. Each module was a bespoke unit so electrical equipment and HVAC systems had to
be specified as per customer requirements each time.
My role as a support engineer was quite a diverse one and widened my skills to new directions. I did weight estimates
utilising structural drawings and steel books etc. I also spent a lot of time putting together document packages for clients
so I am familiar with document control processes, data sheets and certificates. More technical responsibilities involved
producing cable calculations, specifying correct cables and glands based on industry standards.
HVAC systems were an important part of modular design as well the fire and gas systems. I produced cause and effect
matrices and took part in Factory Acceptance Tests.
I was also the first aider.](https://image.slidesharecdn.com/9cccb142-d33d-4fb6-8230-c3a2fb2143c5-160523165155/85/T-Luoma_project_engineer_Instrumentation_Automation_controls-3-320.jpg)
More Related Content
What's hot (20)
Viewers also liked (15)
Similar to T. Luoma_project_engineer_Instrumentation_Automation_controls (20)
T. Luoma_project_engineer_Instrumentation_Automation_controls
- 1. CURRICULUM VITAE Name : Tero Luoma Date of Birth : 21-03-1980 Address : 14 Reed Crescent Marital Status : Married Laurencekirk Nationality : Finnish Aberdeenshire, AB30 1EF Email : trluoma@gmail.com Telephone : 07882343778 LinkedIN : uk.linkedin.com/in/LuomaTT Executive Summary: An experienced Project Engineer with a flexible attitude and a high level of drive and commitment. A clear thinker with good communication skills, who is able to develop relationships at all levels. Proven track record with delivering projects under pressure, within deadlines as well as cost and planning requirements. Looking for a position which offers an opportunity to develop new technology or systems. Open to both staff or contract positions. Re-location be it international or nationwide is an option. Profile: Over 10 years of experience in working in Oil and Gas Industry, involved in the design, build and supply of small/medium size instrumentation and controls systems mainly to be operated in hazardous area locations. Key Experience:  Skilled user of AutoCAD design tool  Working knowledge of Codes/Standards – typically DNV 2.7.1, 2.7.2 & 2.7.3, NORSOK, API and BS EN 60079  EEMUA Approved COMPEX, modules EX01, EX02, EX03 & EX04 (valid till March 2019) Qualifications: 2000-2005 Central Ostrobothnia, University of Applied Sciences - Finland BSc in Automation and Controls engineering
- 2. RELEVANT WORK EXPERIENCE :- September 2015 to March 2016 National Oilwell Varco (DDS- Wellbore Technologies) Role: Technical Sales Engineer In this role my responsibilities were as identified below: Producing detailed proposal drawings and other technical documents for tenders. I have acquired a reputation of producing quality work and colleagues from other divisions regularly utilised my skills and willingness to help. Served as an interface between the client, sales engineer and applications engineer to ensure client’s requirements wee fully understood and met. In this role I was at the forefront of rolling out DDS’s tiered optimisation solutions which enable automated drilling, offering greatly improved Rate of Penetration for the operators, reducing drilling days. I volunteered to take on quality improvement (on top of raising, tracking and closing out any non-conformances) and was an integral part in creating project management documentation and procedures. Due to my good track record of delivering projects with minimal supervision, I was assigned to project manage all the projects during the sickness absence of our project manager. I was the driving force behind organising a service plan for a new product launched from America. I, together with global standards group, put together a top level quality plan and identified training requirements for the technicians to maintain product competency. Volunteered as First aider, safety committee representative as well as being included on the 24hr on-call rota. November 2013 – September 2015 National Oilwell Varco (DDS- Wellbore Technologies) Role: Project Engineer In this role my responsibilities were as identified below: I Produced engineering designs and associated engineering documents (such as drawings, calculations and reports) and ensured that they were completed within the required timescales Progress small and medium sized engineering projects, as allocated by the Regional/Sales Manager - Projects, or working as part of a team on larger projects. Most work was carried out with minimal supervision, but with regular consultation with the Regional Sales Manager and other team members. Carried out Project work, which in addition to design, included all aspects of the design process such as drafting, production of engineering documentation, FAT, packing & delivery where deemed appropriate. Liaised with clients and suppliers as required and provided engineering support to Manufacturing, Sales and Service Departments Assisted in general clerical and administrative duties to ensure the smooth running of the Projects Department as well as volunteered to be included on the on-call rota. I was also the first aider for our department.
- 3. December 2012 – November 2013 EFC GROUP Role: Project Engineer I took overall responsibility of the project, leading it from the sales handover all the way to close out meeting and afterwards providing aftercare support to clients. Besides being the interface between the client and EFC I worked closely with all the different departments (sales, design office and workshop) to achieve good quality work. I gave guidance for the more junior project engineers assigned with projects similar to those I had completed previously. Sales department relied on the bills of materials from the projects I had carried out, knowing they were up to date and therefore a good basis for quoting for repeat orders. I was also the first aider. Key projects delivered: - A tank gauging system c/w hull draft measurement and 2-axis inclination metering. - An air pressure vessel surface temperature monitoring system for an active heave compensator system August 2012 - December 2012 LABTECH SERVICES LIMITED Role: Project Engineer I interfaced with the sales office to design A60 rated offshore containers to meet client’s requirements Ensured compliance to all applicable design standards [DNV 2.7-1 BS EN 12079 (structural) and DNV 2.7-2 and/or NORSOK] As a project engineer I was responsible of on time and on budget delivery and ultimately client satisfaction. I was the first point of contact for the client and an interface between all different disciplines and third party companies. I was the first aider. August 2010 - August 2012 OEG Offshore Role: Project engineer, initially an electrical support engineer In keeping within budget costs and man hours my main responsibilities were to take care of procurement and specification of equipment installed into a module. Each module was a bespoke unit so electrical equipment and HVAC systems had to be specified as per customer requirements each time. My role as a support engineer was quite a diverse one and widened my skills to new directions. I did weight estimates utilising structural drawings and steel books etc. I also spent a lot of time putting together document packages for clients so I am familiar with document control processes, data sheets and certificates. More technical responsibilities involved producing cable calculations, specifying correct cables and glands based on industry standards. HVAC systems were an important part of modular design as well the fire and gas systems. I produced cause and effect matrices and took part in Factory Acceptance Tests. I was also the first aider.
- 4. August 2009 - June 2010 EnerMech Ltd Role: Electrical projects engineer In this role I acquired experience in creating cost reports, timing plans and work packs. My role included responding to customers’ requests for quotations and taking charge of the project from there on. This involved creating a cost estimate and a project timing plan as well as procurement of parts. My main project was an operator’s cabin exchange from two of the cranes on an offshore oil platform. It was my responsibility to create cable calculations and electrical equipment list and to liaise with mechanical engineers as well as technicians offshore. May 2006 - August 2009 National Oilwell Varco, Rig Solutions, Montrose Role: Electrical projects engineer / designer In collaboration with designers, technicians and document control department, my main responsibility was to upgrade control systems and electrical equipment as per customer request. This role involved creating quotes, doing the procurement all the way to the financial close outs. I was initially employed as an electrical draftsman so I am an experienced user of AutoCAD design tool. References: Available upon request.