TallGeologic
0 likes282 views
The document contains geological data including elevation measurements in meters for various geographical locations in different districts of Venezuela. It also lists stratigraphic units with their corresponding geologic formation names and age ranging from Eocene to Oligocene epoch.
1 of 1
Download to read offline
Ad
Recommended
Mis Actividades
Mis Actividadesblogpiano
油
The document lists the names of four musicians and the instruments they play in a band: Octavio Mosquera plays piano, Elvis Guevar plays guitar, Uriel Ch叩vez plays bass, and Jafet Ch叩vez plays the drums, while Xavier Camarena plays congas.Eliminatories tenis taula a. 0
Eliminatories tenis taula a. 0escsantacaterina
油
The document outlines the structure of a tournament with two groups. Group 1 has quarterfinal and semifinal matches leading to a final. Group 2 also has quarterfinals, semifinals, and a final match. The document lists the participants in each stage of the tournament for both groups.Las_Mingachas_Workflow
Las_Mingachas_WorkflowMarc Diviu Franco
油
1. A digital elevation model was created for the Las Mingachas outcrop area using aerial imagery and stratigraphic well data. Major surfaces like maximum flooding surfaces were reconstructed from digitized geological traces and well tops.
2. The volume between the reconstructed sequential surfaces was modeled using 3D cells oriented in the paleoflow direction, with layering dependent on the sequence set.
3. Facies models were developed for each sequence set by analyzing stratigraphic well and outcrop data to define the distribution and nature of facies within the bounding surfaces.Geological simulation using implicit approach
Geological simulation using implicit approachalecacer
油
This document proposes a new approach called implicit boundary simulation (IBS) for stochastic geological modelling that combines implicit and stochastic modelling. IBS simulates the distance function to geological boundaries using geostatistical algorithms rather than interpolating distances. The approach is applied to a deposit, showing IBS better reproduces indicator variograms and interval lengths compared to sequential indicator simulation. IBS provides distances to boundaries, conveying information about mineral zone configuration unlike other methods.Gautier Laurent - Implicit Modelling and volume deformation
Gautier Laurent - Implicit Modelling and volume deformationThe University of Western Australia
油
The document discusses the use of an expert-driven approach for geological structural modeling to reconcile data-driven methods with sparse data. It introduces a tool called REED for simulating geological folds using interactive deformation algorithms, which emphasizes physical consistency and robust performance. Additionally, implicit modeling techniques are proposed to enhance the modeling of geological folds by integrating structural observations and allowing simulation of complex geological histories.3D Modelling Summary Projects
3D Modelling Summary ProjectsMarc Diviu Franco
油
The document outlines various seismic interpretation and surface-based projects led by Marc Diviu, focusing on areas such as Nova Scotia and Maestrazgo. It includes methods like manual interpretation of seismic horizons, digital mapping, and facies modeling. Key highlights include fault framework projects and well management strategies.Las mingachas workflow
Las mingachas workflowMarc Diviu Franco
油
1. A digital elevation model was created for the Las Mingachas outcrop area using aerial imagery and stratigraphic well data. Major flooding surfaces and sequential surfaces were reconstructed from digitized geological traces and well data.
2. A 3D volume model was constructed between the reconstructed sequential surfaces using gridded cells oriented in the paleoflow direction. Facies models were defined for each sequence set based on outcrop and well data.Hedrick_Poster
Hedrick_PosterAnastasia Hedrick
油
This document summarizes a research project that digitized and modeled historic mine plans and data from the Camp Bird Mine in Colorado in order to create a 3D model. The goals were to preserve historical mining documents, make the data more accessible, and allow for analysis to support potential reopening and development of the mine. Over 2,000 historic maps were compiled and processed using GIS and Vulcan software. The resulting 3D model integrated data from multiple levels and can be used to better understand the mine's geology, workings, and impacts. This addressed the lack of existing digital compilations and issues with studying the extensive paper records.2016 Gold Kng Poster NMT April
2016 Gold Kng Poster NMT AprilAnastasia Hedrick
油
This document summarizes a study conducted by undergraduate geology students at Fort Lewis College analyzing water quality data from the Gold King Mine spill. The students:
1) Compared water quality data from EPA samples to their own samples collected along the Animas River after the spill.
2) Created a 3D model of the Gold King Mine underground workings to investigate possible connections explaining high discharge volumes.
3) Presented their comparative analysis and findings to the public to provide a more complete understanding of the mine and varying metal concentrations in streams.Part 1 of 4 Leapfrog Introductory
Part 1 of 4 Leapfrog Introductoryleapfrog3d
油
This document introduces the Leapfrog mining software. It summarizes that Leapfrog allows for fast, flexible, and dynamic 3D geological modeling. It works through an implicit 3D engine that interpolates data points to build a 3D model much faster than alternative methods. Leapfrog encourages exploring multiple interpretations simultaneously and refining models directly. Its powerful 3D visualization enables compelling presentation and improved interpretation of geological models.Manual basico de vulcanCarlos Daniel Andrade Serrano
油
El documento presenta una introducci坦n al software Vulcan 3D, describiendo su barra de explorador, carpetas principales como "Design Database" y "Triangulation", y herramientas b叩sicas como cargar y remover capas y triangulaciones. Tambi辿n explica la pantalla de dibujo, ventanas de estado y barras de herramientas, con 辿nfasis en comandos comunes como listar capas, deshacer/rehacer, y crear y eliminar vistas de secci坦n. Finalmente, resume las principales herramientas de dibujo y edici坦n como capaGMEX Introduction
GMEX Introductiongmex
油
Dr. John McLellan established GMEX in 2012 to provide geomechanical modelling services to the mining industry. GMEX uses finite element and discrete element modelling techniques to better understand geological deformation events and fluid flow patterns to enable predictive mineral exploration targeting. These modelling techniques simulate crustal deformation and analyze resulting stress, strain, and fluid flow patterns to identify favorable areas for structurally-controlled mineral deposits. GMEX has successfully applied these methods in validation case studies to define new exploration targets at mines like Sunrise Dam and prioritize regional targets in areas like the Eastern Fold Belt in Mount Isa.Modern mining
Modern miningarabnubia
油
The document discusses the history and modern practices of mining. It covers the earliest records of mining from 3000 BC by Egyptians extracting gold, silver and copper. Modern mining involves prospecting, feasibility studies, extracting desired materials using surface or underground techniques, and reclaiming land after closure. Key aspects covered include exploration methods, resource and reserve estimation, adhering to mining codes, and establishing feasibility studies to evaluate project risk and define scale prior to development and operation.Modelling at the heart of teaching
Modelling at the heart of teachingCherwelllearning
油
This document discusses the importance of modelling as a way to make implicit thinking explicit for students. It suggests 5 questions to consider when modelling, including how to create conditions for deep thinking. Different types of modelling are presented, such as student-generated, teacher-modelling, and differentiated modelling. Live modelling is described as the "Rolls Royce" approach, showing students how to complete a task excellently. The key message is that modelling clarity, avoiding assumptions, and demonstrating mastery of a skill can help students learn.Weighting of precipitation recharge
Weighting of precipitation rechargeMarc Diviu Franco
油
Weighting of precipitation recharge from terrain slope and geology using Digital Elevation Models and by raster operationsModelling of 3D gelogical structures
Modelling of 3D gelogical structuresZawar Khan
油
The document discusses 3D geological modeling, including defining the process as developing a mathematical representation of subsurface structures using data from boreholes, seismic surveys, and maps. It outlines the basic steps of 3D modeling as including data georeferencing, picking structural features, creating a fault network, and horizon modeling on a block-by-block basis. A case study of 3D modeling of the Brady's geothermal system in Nevada is also presented.Semester Project in Reservoir Simulation
Semester Project in Reservoir SimulationKonstantinos D Pandis
油
The document describes a reservoir simulation project involving history matching of an oil reservoir with multiple producers and injectors. 10 different simulation trials were run to match historical production data from 4 key wells by adjusting transmissibility multipliers in different regions of the reservoir model. The best results were achieved in trial 6, where transmissibility was increased in two areas and changed near the main injectors, successfully matching the production of the most important well while having limited effect on other wells. However, fully history matching all 4 wells proved challenging.3D Facies Modeling
3D Facies ModelingMarc Diviu Franco
油
The document is a master's thesis by Marc Diviu Franco on 3D modeling of subsurface geology, focusing on a study area in the Ebro Basin, Spain. It outlines the methodology used in creating facies models, including stratigraphic framework development and fault modeling, while also discussing results and conclusions related to hydrocarbon reservoirs. The study emphasizes the importance of accurate geological modeling for resource management and highlights the application of various statistical methods in understanding geological formations.25158 m. diviu
25158 m. diviuMarc Diviu Franco
油
This letter recognizes Mr. M. Diviu for presenting the abstract "3D Facies Model in Large-scale Fan Delta Complexes (Montserrat and Sant Lloren巽 del Munt, Eocene, Ebro Basin, NE Spain)" at the 77th EAGE Conference & Exhibition 2015 with the theme "Earth Science for Energy and Environment" held from June 1-4, 2015 in Madrid, Spain. The letter is signed by Walter Rietveld, the Technical Program Officer of EAGE.Seq history
Seq historyMarc Diviu Franco
油
Sequential Stratigraphic history of the la "Sagrera High Velocity Train Station" developed for the project.Petrel course Module_1: Import data and management, make simple surfaces
Petrel course Module_1: Import data and management, make simple surfacesMarc Diviu Franco
油
This document outlines an introduction course to Petrel software. It covers 5 modules: 1) Loading and editing data, 2) Digital mapping, 3) Surface reconstruction and editing, 4) Fault modeling, and 5) Facies modeling. The course will teach important Petrel functions like surface reconstruction, property modeling between horizons, and making grids and horizons. It provides examples of specific tasks like importing elevation data, draping maps, digitizing polygons for mapping, and modeling zones between reconstructed surfaces.M.Diviu
M.DiviuMarc Diviu Franco
油
The document describes a 3D facies model of two fan-delta complexes in Spain based on outcrop data. The model covers an area of 375 km2 and stratigraphic thickness of 325 meters, capturing heterogeneity from two scales of cyclicity. Facies belts were modeled using geostatistics calibrated with paleogeographic maps. The model reproduces the complex geometry of the delta front facies and potential stratigraphic traps related to facies changes. The exploration-scale model correlates well with outcrop cross-sections, demonstrating the modeling strategy could be applicable to subsurface reservoirs.Petrel introduction course guide
Petrel introduction course guideMarc Diviu Franco
油
The document outlines a 10-hour introductory course on Petrel software, designed to help PhD and master's students from the UAB geological department model and visualize reservoirs using geological and geophysical data. The course content is divided into five modules covering various functionalities such as data management, fault modeling, and seismic treatment. Enrollment is limited to 9 participants per session, free for department members, with a symbolic fee for external attendees.More Related Content
Viewers also liked (11)
Hedrick_Poster
Hedrick_PosterAnastasia Hedrick
油
This document summarizes a research project that digitized and modeled historic mine plans and data from the Camp Bird Mine in Colorado in order to create a 3D model. The goals were to preserve historical mining documents, make the data more accessible, and allow for analysis to support potential reopening and development of the mine. Over 2,000 historic maps were compiled and processed using GIS and Vulcan software. The resulting 3D model integrated data from multiple levels and can be used to better understand the mine's geology, workings, and impacts. This addressed the lack of existing digital compilations and issues with studying the extensive paper records.2016 Gold Kng Poster NMT April
2016 Gold Kng Poster NMT AprilAnastasia Hedrick
油
This document summarizes a study conducted by undergraduate geology students at Fort Lewis College analyzing water quality data from the Gold King Mine spill. The students:
1) Compared water quality data from EPA samples to their own samples collected along the Animas River after the spill.
2) Created a 3D model of the Gold King Mine underground workings to investigate possible connections explaining high discharge volumes.
3) Presented their comparative analysis and findings to the public to provide a more complete understanding of the mine and varying metal concentrations in streams.Part 1 of 4 Leapfrog Introductory
Part 1 of 4 Leapfrog Introductoryleapfrog3d
油
This document introduces the Leapfrog mining software. It summarizes that Leapfrog allows for fast, flexible, and dynamic 3D geological modeling. It works through an implicit 3D engine that interpolates data points to build a 3D model much faster than alternative methods. Leapfrog encourages exploring multiple interpretations simultaneously and refining models directly. Its powerful 3D visualization enables compelling presentation and improved interpretation of geological models.Manual basico de vulcanCarlos Daniel Andrade Serrano
油
El documento presenta una introducci坦n al software Vulcan 3D, describiendo su barra de explorador, carpetas principales como "Design Database" y "Triangulation", y herramientas b叩sicas como cargar y remover capas y triangulaciones. Tambi辿n explica la pantalla de dibujo, ventanas de estado y barras de herramientas, con 辿nfasis en comandos comunes como listar capas, deshacer/rehacer, y crear y eliminar vistas de secci坦n. Finalmente, resume las principales herramientas de dibujo y edici坦n como capaGMEX Introduction
GMEX Introductiongmex
油
Dr. John McLellan established GMEX in 2012 to provide geomechanical modelling services to the mining industry. GMEX uses finite element and discrete element modelling techniques to better understand geological deformation events and fluid flow patterns to enable predictive mineral exploration targeting. These modelling techniques simulate crustal deformation and analyze resulting stress, strain, and fluid flow patterns to identify favorable areas for structurally-controlled mineral deposits. GMEX has successfully applied these methods in validation case studies to define new exploration targets at mines like Sunrise Dam and prioritize regional targets in areas like the Eastern Fold Belt in Mount Isa.Modern mining
Modern miningarabnubia
油
The document discusses the history and modern practices of mining. It covers the earliest records of mining from 3000 BC by Egyptians extracting gold, silver and copper. Modern mining involves prospecting, feasibility studies, extracting desired materials using surface or underground techniques, and reclaiming land after closure. Key aspects covered include exploration methods, resource and reserve estimation, adhering to mining codes, and establishing feasibility studies to evaluate project risk and define scale prior to development and operation.Modelling at the heart of teaching
Modelling at the heart of teachingCherwelllearning
油
This document discusses the importance of modelling as a way to make implicit thinking explicit for students. It suggests 5 questions to consider when modelling, including how to create conditions for deep thinking. Different types of modelling are presented, such as student-generated, teacher-modelling, and differentiated modelling. Live modelling is described as the "Rolls Royce" approach, showing students how to complete a task excellently. The key message is that modelling clarity, avoiding assumptions, and demonstrating mastery of a skill can help students learn.Weighting of precipitation recharge
Weighting of precipitation rechargeMarc Diviu Franco
油
Weighting of precipitation recharge from terrain slope and geology using Digital Elevation Models and by raster operationsModelling of 3D gelogical structures
Modelling of 3D gelogical structuresZawar Khan
油
The document discusses 3D geological modeling, including defining the process as developing a mathematical representation of subsurface structures using data from boreholes, seismic surveys, and maps. It outlines the basic steps of 3D modeling as including data georeferencing, picking structural features, creating a fault network, and horizon modeling on a block-by-block basis. A case study of 3D modeling of the Brady's geothermal system in Nevada is also presented.Semester Project in Reservoir Simulation
Semester Project in Reservoir SimulationKonstantinos D Pandis
油
The document describes a reservoir simulation project involving history matching of an oil reservoir with multiple producers and injectors. 10 different simulation trials were run to match historical production data from 4 key wells by adjusting transmissibility multipliers in different regions of the reservoir model. The best results were achieved in trial 6, where transmissibility was increased in two areas and changed near the main injectors, successfully matching the production of the most important well while having limited effect on other wells. However, fully history matching all 4 wells proved challenging.3D Facies Modeling
3D Facies ModelingMarc Diviu Franco
油
The document is a master's thesis by Marc Diviu Franco on 3D modeling of subsurface geology, focusing on a study area in the Ebro Basin, Spain. It outlines the methodology used in creating facies models, including stratigraphic framework development and fault modeling, while also discussing results and conclusions related to hydrocarbon reservoirs. The study emphasizes the importance of accurate geological modeling for resource management and highlights the application of various statistical methods in understanding geological formations.More from Marc Diviu Franco (6)
25158 m. diviu
25158 m. diviuMarc Diviu Franco
油
This letter recognizes Mr. M. Diviu for presenting the abstract "3D Facies Model in Large-scale Fan Delta Complexes (Montserrat and Sant Lloren巽 del Munt, Eocene, Ebro Basin, NE Spain)" at the 77th EAGE Conference & Exhibition 2015 with the theme "Earth Science for Energy and Environment" held from June 1-4, 2015 in Madrid, Spain. The letter is signed by Walter Rietveld, the Technical Program Officer of EAGE.Seq history
Seq historyMarc Diviu Franco
油
Sequential Stratigraphic history of the la "Sagrera High Velocity Train Station" developed for the project.Petrel course Module_1: Import data and management, make simple surfaces
Petrel course Module_1: Import data and management, make simple surfacesMarc Diviu Franco
油
This document outlines an introduction course to Petrel software. It covers 5 modules: 1) Loading and editing data, 2) Digital mapping, 3) Surface reconstruction and editing, 4) Fault modeling, and 5) Facies modeling. The course will teach important Petrel functions like surface reconstruction, property modeling between horizons, and making grids and horizons. It provides examples of specific tasks like importing elevation data, draping maps, digitizing polygons for mapping, and modeling zones between reconstructed surfaces.M.Diviu
M.DiviuMarc Diviu Franco
油
The document describes a 3D facies model of two fan-delta complexes in Spain based on outcrop data. The model covers an area of 375 km2 and stratigraphic thickness of 325 meters, capturing heterogeneity from two scales of cyclicity. Facies belts were modeled using geostatistics calibrated with paleogeographic maps. The model reproduces the complex geometry of the delta front facies and potential stratigraphic traps related to facies changes. The exploration-scale model correlates well with outcrop cross-sections, demonstrating the modeling strategy could be applicable to subsurface reservoirs.Petrel introduction course guide
Petrel introduction course guideMarc Diviu Franco
油
The document outlines a 10-hour introductory course on Petrel software, designed to help PhD and master's students from the UAB geological department model and visualize reservoirs using geological and geophysical data. The course content is divided into five modules covering various functionalities such as data management, fault modeling, and seismic treatment. Enrollment is limited to 9 participants per session, free for department members, with a symbolic fee for external attendees.Ad
TallGeologic
- 1. 200 600 1000 1200 800 400 0 4Nkm FilaNElNCapote RioNSeco FilaNlasNPlayitas DISTRITONMIRANDA DISTRITONBOLIVAR ElNMam坦n PiedraNPre単ada LaNPe単a LaNCruzNdeNTaratara N, XN1X5 L5E L5E L5E L5NEocene L5E ,S QueralesBFm. AguaBClaraBFm. SanBLuisBFm. PatiecitosBFm. PedregosoBFm. PecayaBFm. ElBPara鱈soBFm. GuarabalBFm. O-MBBoundary M O,M O